Combine Travis CI option-setting commands (#12474)
This commit is contained in:
Scott Lahteine
parent
9d13f07d09
commit
826d570162
GPG key ID:
4AEE18F83AFDEB23
20 changed files with 118 additions and 131 deletions
|
|
@ -29,9 +29,8 @@ before_install:
|
|||
#
|
||||
# Publish the buildroot script folder
|
||||
- chmod +x ${TRAVIS_BUILD_DIR}/buildroot/bin/*
|
||||
- export PATH=${TRAVIS_BUILD_DIR}/buildroot/bin/:${PATH}
|
||||
- chmod +x ${TRAVIS_BUILD_DIR}/buildroot/share/tests/*
|
||||
- export PATH=${TRAVIS_BUILD_DIR}/buildroot/share/tests/:${PATH}
|
||||
- export PATH=${TRAVIS_BUILD_DIR}/buildroot/bin/:${TRAVIS_BUILD_DIR}/buildroot/share/tests/:${PATH}
|
||||
|
||||
install:
|
||||
#- pip install -U platformio
|
||||
|
|
|
|||
|
|
@ -79,11 +79,11 @@
|
|||
#elif PIN_EXISTS(E5_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E5_AUTO_FAN_PIN
|
||||
#error "SPINDLE_LASER_PWM_PIN is used by E5_AUTO_FAN_PIN."
|
||||
#elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
|
||||
#error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
|
||||
#error "SPINDLE_LASER_PWM_PIN is used by FAN_PIN."
|
||||
#elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
|
||||
#error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
|
||||
#error "SPINDLE_LASER_PWM_PIN is used by FAN1_PIN."
|
||||
#elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
|
||||
#error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
|
||||
#error "SPINDLE_LASER_PWM_PIN is used by FAN2_PIN."
|
||||
#elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
|
||||
#error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
|
||||
#elif PIN_EXISTS(MOTOR_CURRENT_PWM_XY) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_XY_PIN
|
||||
|
|
|
|||
|
|
@ -40,6 +40,11 @@
|
|||
#include "../../module/planner.h"
|
||||
#include "../../module/motion.h"
|
||||
|
||||
#if DISABLED(LCD_PROGRESS_BAR) && ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
|
||||
#include "../../feature/filwidth.h"
|
||||
#include "../../gcode/parser.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#include "../../feature/bedlevel/ubl/ubl.h"
|
||||
#endif
|
||||
|
|
@ -97,11 +102,11 @@ static void createChar_P(const char c, const byte * const ptr) {
|
|||
#define LCD_STR_PROGRESS "\x03\x04\x05"
|
||||
#endif
|
||||
|
||||
void MarlinUI::set_custom_characters(
|
||||
#if ENABLED(LCD_PROGRESS_BAR) || ENABLED(SHOW_BOOTSCREEN)
|
||||
const HD44780CharSet screen_charset/*=CHARSET_INFO*/
|
||||
void MarlinUI::set_custom_characters(const HD44780CharSet screen_charset/*=CHARSET_INFO*/) {
|
||||
#if DISABLED(LCD_PROGRESS_BAR) && DISABLED(SHOW_BOOTSCREEN)
|
||||
UNUSED(screen_charset);
|
||||
#endif
|
||||
) {
|
||||
|
||||
// CHARSET_BOOT
|
||||
#if ENABLED(SHOW_BOOTSCREEN)
|
||||
const static PROGMEM byte corner[4][8] = { {
|
||||
|
|
@ -341,7 +346,7 @@ void MarlinUI::init_lcd() {
|
|||
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||
#endif
|
||||
|
||||
LCD_SET_CHARSET(on_status_screen() ? CHARSET_INFO : CHARSET_MENU);
|
||||
set_custom_characters(on_status_screen() ? CHARSET_INFO : CHARSET_MENU);
|
||||
|
||||
lcd.clear();
|
||||
}
|
||||
|
|
@ -398,7 +403,7 @@ void MarlinUI::clear_lcd() { lcd.clear(); }
|
|||
}
|
||||
|
||||
void MarlinUI::show_bootscreen() {
|
||||
LCD_SET_CHARSET(CHARSET_BOOT);
|
||||
set_custom_characters(CHARSET_BOOT);
|
||||
lcd.clear();
|
||||
|
||||
#define LCD_EXTRA_SPACE (LCD_WIDTH-8)
|
||||
|
|
@ -470,7 +475,7 @@ void MarlinUI::clear_lcd() { lcd.clear(); }
|
|||
|
||||
lcd.clear();
|
||||
safe_delay(100);
|
||||
LCD_SET_CHARSET(CHARSET_INFO);
|
||||
set_custom_characters(CHARSET_INFO);
|
||||
lcd.clear();
|
||||
}
|
||||
|
||||
|
|
@ -583,7 +588,7 @@ FORCE_INLINE void _draw_bed_status(const bool blink) {
|
|||
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
|
||||
inline void lcd_draw_progress_bar(const uint8_t percent) {
|
||||
void MarlinUI::draw_progress_bar(const uint8_t percent) {
|
||||
const int16_t tix = (int16_t)(percent * (LCD_WIDTH) * 3) / 100,
|
||||
cel = tix / 3,
|
||||
rem = tix % 3;
|
||||
|
|
@ -612,7 +617,7 @@ void MarlinUI::draw_status_message(const bool blink) {
|
|||
// or if there is no message set.
|
||||
if (ELAPSED(millis(), progress_bar_ms + PROGRESS_BAR_MSG_TIME) || !has_status()) {
|
||||
const uint8_t progress = get_progress();
|
||||
if (progress > 2) return lcd_draw_progress_bar(progress);
|
||||
if (progress > 2) return draw_progress_bar(progress);
|
||||
}
|
||||
|
||||
#elif ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
|
||||
|
|
|
|||
|
|
@ -37,6 +37,12 @@
|
|||
#include "../../module/motion.h"
|
||||
#include "../../module/temperature.h"
|
||||
|
||||
#if ENABLED(FILAMENT_LCD_DISPLAY)
|
||||
#include "../../feature/filwidth.h"
|
||||
#include "../../module/planner.h"
|
||||
#include "../../gcode/parser.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
#include "../../sd/cardreader.h"
|
||||
#endif
|
||||
|
|
@ -477,9 +483,7 @@ void MarlinUI::draw_status_screen() {
|
|||
|
||||
#if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
|
||||
// Alternate Status message and Filament display
|
||||
if (PENDING(millis(), next_filament_display))
|
||||
draw_status_message(blink);
|
||||
else {
|
||||
if (ELAPSED(millis(), next_filament_display)) {
|
||||
lcd_put_u8str_P(PSTR(LCD_STR_FILAM_DIA));
|
||||
lcd_put_wchar(':');
|
||||
lcd_put_u8str(wstring);
|
||||
|
|
@ -488,9 +492,9 @@ void MarlinUI::draw_status_screen() {
|
|||
lcd_put_u8str(mstring);
|
||||
lcd_put_wchar('%');
|
||||
}
|
||||
#else
|
||||
draw_status_message(blink);
|
||||
else
|
||||
#endif
|
||||
draw_status_message(blink);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -243,7 +243,7 @@ void MarlinUI::goto_screen(screenFunc_t screen, const uint32_t encoder/*=0*/) {
|
|||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
if (!ubl.lcd_map_control)
|
||||
#endif
|
||||
LCD_SET_CHARSET(screen == status_screen ? CHARSET_INFO : CHARSET_MENU);
|
||||
set_custom_characters(screen == status_screen ? CHARSET_INFO : CHARSET_MENU);
|
||||
#endif
|
||||
|
||||
refresh(LCDVIEW_CALL_REDRAW_NEXT);
|
||||
|
|
|
|||
|
|
@ -52,11 +52,13 @@ static void lcd_factory_settings() {
|
|||
|
||||
#if ENABLED(LCD_PROGRESS_BAR_TEST)
|
||||
|
||||
#include "../lcdprint.h"
|
||||
|
||||
static void progress_bar_test() {
|
||||
static int8_t bar_percent = 0;
|
||||
if (ui.use_click()) {
|
||||
ui.goto_previous_screen();
|
||||
LCD_SET_CHARSET(CHARSET_MENU);
|
||||
ui.set_custom_characters(CHARSET_MENU);
|
||||
return;
|
||||
}
|
||||
bar_percent += (int8_t)ui.encoderPosition;
|
||||
|
|
@ -65,12 +67,12 @@ static void lcd_factory_settings() {
|
|||
draw_menu_item_static(0, PSTR(MSG_PROGRESS_BAR_TEST), true, true);
|
||||
lcd_moveto((LCD_WIDTH) / 2 - 2, LCD_HEIGHT - 2);
|
||||
lcd_put_u8str(int(bar_percent)); lcd_put_wchar('%');
|
||||
lcd_moveto(0, LCD_HEIGHT - 1); lcd_draw_progress_bar(bar_percent);
|
||||
lcd_moveto(0, LCD_HEIGHT - 1); ui.draw_progress_bar(bar_percent);
|
||||
}
|
||||
|
||||
void _progress_bar_test() {
|
||||
ui.goto_screen(progress_bar_test);
|
||||
LCD_SET_CHARSET(CHARSET_INFO);
|
||||
ui.set_custom_characters(CHARSET_INFO);
|
||||
}
|
||||
|
||||
#endif // LCD_PROGRESS_BAR_TEST
|
||||
|
|
|
|||
|
|
@ -211,6 +211,12 @@
|
|||
FONT_EDIT,
|
||||
FONT_MENU
|
||||
};
|
||||
#else
|
||||
enum HD44780CharSet : uint8_t {
|
||||
CHARSET_MENU,
|
||||
CHARSET_INFO,
|
||||
CHARSET_BOOT
|
||||
};
|
||||
#endif
|
||||
|
||||
////////////////////////////////////////////
|
||||
|
|
@ -282,23 +288,15 @@ public:
|
|||
|
||||
static constexpr bool drawing_screen = false, first_page = true;
|
||||
|
||||
enum HD44780CharSet : uint8_t { CHARSET_MENU, CHARSET_INFO, CHARSET_BOOT };
|
||||
|
||||
static void set_custom_characters(
|
||||
#if ENABLED(LCD_PROGRESS_BAR) || ENABLED(SHOW_BOOTSCREEN)
|
||||
const HD44780CharSet screen_charset=CHARSET_INFO
|
||||
#endif
|
||||
);
|
||||
static void set_custom_characters(const HD44780CharSet screen_charset=CHARSET_INFO);
|
||||
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
static millis_t progress_bar_ms; // Start time for the current progress bar cycle
|
||||
static void draw_progress_bar(const uint8_t percent);
|
||||
#if PROGRESS_MSG_EXPIRE > 0
|
||||
static millis_t MarlinUI::expire_status_ms; // = 0
|
||||
static inline void reset_progress_bar_timeout() { expire_status_ms = 0; }
|
||||
#endif
|
||||
#define LCD_SET_CHARSET(C) set_custom_characters(C)
|
||||
#else
|
||||
#define LCD_SET_CHARSET(C) set_custom_characters()
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,3 +1,3 @@
|
|||
#!/usr/bin/env bash
|
||||
|
||||
eval "echo \"#define ${1} ${2}\" >>Marlin/Configuration.h"
|
||||
eval "echo \"#define ${1} ${2}\" >>Marlin/Configuration_adv.h"
|
||||
|
|
|
|||
|
|
@ -1,3 +0,0 @@
|
|||
#!/usr/bin/env bash
|
||||
|
||||
eval "echo \"#define ${1} ${2}\" >>Marlin/Configuration_adv.h"
|
||||
|
|
@ -5,3 +5,7 @@ SED=$(which gsed || which sed)
|
|||
for opt in "$@" ; do
|
||||
eval "${SED} -i 's/\([[:blank:]]*\)\(#define \b${opt}\b\)/\1\/\/\2/g' Marlin/Configuration.h"
|
||||
done
|
||||
|
||||
for opt in "$@" ; do
|
||||
eval "${SED} -i 's/\([[:blank:]]*\)\(#define \b${opt}\b\)/\1\/\/\2/g' Marlin/Configuration_adv.h"
|
||||
done
|
||||
|
|
|
|||
|
|
@ -1,7 +0,0 @@
|
|||
#!/usr/bin/env bash
|
||||
|
||||
SED=$(which gsed || which sed)
|
||||
|
||||
for opt in "$@" ; do
|
||||
eval "${SED} -i 's/\([[:blank:]]*\)\(#define \b${opt}\b\)/\1\/\/\2/g' Marlin/Configuration_adv.h"
|
||||
done
|
||||
|
|
@ -5,3 +5,7 @@ SED=$(which gsed || which sed)
|
|||
for opt in "$@" ; do
|
||||
eval "${SED} -i 's/\/\/[[:blank:]]*\(#define \b${opt}\b\)/\1/g' Marlin/Configuration.h"
|
||||
done
|
||||
|
||||
for opt in "$@" ; do
|
||||
eval "${SED} -i 's/\/\/[[:blank:]]*\(#define \b${opt}\b\)/\1/g' Marlin/Configuration_adv.h"
|
||||
done
|
||||
|
|
|
|||
|
|
@ -1,7 +0,0 @@
|
|||
#!/usr/bin/env bash
|
||||
|
||||
SED=$(which gsed || which sed)
|
||||
|
||||
for opt in "$@" ; do
|
||||
eval "${SED} -i 's/\/\/[[:blank:]]*\(#define \b${opt}\b\)/\1/g' Marlin/Configuration_adv.h"
|
||||
done
|
||||
|
|
@ -3,3 +3,4 @@
|
|||
SED=$(which gsed || which sed)
|
||||
|
||||
eval "${SED} -E -i 's/(\/\/)?(#define \b${1}\b).*$/\2 ${2}/g' Marlin/Configuration.h"
|
||||
eval "${SED} -E -i 's/(\/\/)?(#define \b${1}\b).*$/\2 ${2}/g' Marlin/Configuration_adv.h"
|
||||
|
|
|
|||
|
|
@ -1,5 +0,0 @@
|
|||
#!/usr/bin/env bash
|
||||
|
||||
SED=$(which gsed || which sed)
|
||||
|
||||
eval "${SED} -E -i 's/(\/\/)?(#define \b${1}\b).*$/\2 ${2}/g' Marlin/Configuration_adv.h"
|
||||
|
|
@ -15,14 +15,14 @@ exec_test $1 $2 "RAMPS4DUE_EFB S_CURVE_ACCELERATION EEPROM_SETTINGS"
|
|||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_RADDS
|
||||
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR
|
||||
opt_enable_adv Z_TRIPLE_STEPPER_DRIVERS Z_TRIPLE_ENDSTOPS Z_STEPPER_AUTO_ALIGN
|
||||
opt_add_adv Z2_MAX_ENDSTOP_INVERTING false
|
||||
opt_add_adv Z3_MAX_ENDSTOP_INVERTING false
|
||||
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR \
|
||||
Z_TRIPLE_STEPPER_DRIVERS Z_TRIPLE_ENDSTOPS Z_STEPPER_AUTO_ALIGN
|
||||
opt_add Z2_MAX_ENDSTOP_INVERTING false
|
||||
opt_add Z3_MAX_ENDSTOP_INVERTING false
|
||||
pins_set RAMPS X_MAX_PIN -1
|
||||
pins_set RAMPS Y_MAX_PIN -1
|
||||
opt_add_adv Z2_MAX_PIN 2
|
||||
opt_add_adv Z3_MAX_PIN 3
|
||||
opt_add Z2_MAX_PIN 2
|
||||
opt_add Z3_MAX_PIN 3
|
||||
exec_test $1 $2 "Test RADDS with Z_TRIPLE_STEPPER_DRIVERS and Z_STEPPER_AUTO_ALIGN"
|
||||
|
||||
#
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@ opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
|
|||
exec_test $1 $2 "MKS_SBASE SWITCHING_EXTRUDER"
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_MKS_SBASE
|
||||
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB
|
||||
opt_set EXTRUDERS 2
|
||||
opt_set TEMP_SENSOR_0 1
|
||||
opt_set TEMP_SENSOR_1 5
|
||||
|
|
@ -40,26 +40,26 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT \
|
|||
FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY \
|
||||
FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
|
||||
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
|
||||
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
|
||||
opt_enable_adv ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
|
||||
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
|
||||
ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
|
||||
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
exec_test $1 $2 "MKS SBASE Many Features"
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_MKS_SBASE
|
||||
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
|
||||
opt_enable COREYX USE_XMAX_PLUG DAC_MOTOR_CURRENT_DEFAULT \
|
||||
REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING \
|
||||
AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS \
|
||||
FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR FAN_SOFT_PWM
|
||||
opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \
|
||||
FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR FAN_SOFT_PWM \
|
||||
SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \
|
||||
ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK \
|
||||
VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
|
||||
EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS \
|
||||
MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
|
||||
opt_set_adv FAN_MIN_PWM 50
|
||||
opt_set_adv FAN_KICKSTART_TIME 100
|
||||
opt_set_adv XY_FREQUENCY_LIMIT 15
|
||||
opt_set FAN_MIN_PWM 50
|
||||
opt_set FAN_KICKSTART_TIME 100
|
||||
opt_set XY_FREQUENCY_LIMIT 15
|
||||
exec_test $1 $2 "MKS SBASE Many less common options"
|
||||
|
||||
restore_configs
|
||||
|
|
@ -70,7 +70,7 @@ opt_disable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
|||
opt_set X_DRIVER_TYPE TMC2130
|
||||
opt_set Y_DRIVER_TYPE TMC2130
|
||||
opt_set Z_DRIVER_TYPE TMC2130
|
||||
opt_enable_adv TMC_USE_SW_SPI MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG \
|
||||
opt_enable TMC_USE_SW_SPI MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG \
|
||||
SENSORLESS_PROBING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY
|
||||
exec_test $1 $2 "Delta Config (generic) + BOARD_COHESION3D_REMIX + UBL + EEPROM_SETTINGS + SENSORLESS_PROBING"
|
||||
|
||||
|
|
|
|||
|
|
@ -13,8 +13,5 @@ opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSU
|
|||
PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_PARK
|
||||
exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT PAREN_COMMENTS GCODE_MOTION_MODES"
|
||||
|
||||
opt_enable SPINDLE_LASER_ENABLE NO_LCD_MENUS
|
||||
exec_test $1 $2 "STM32F1R SPINDLE_LASER_ENABLE"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
|
|
|||
|
|
@ -30,16 +30,16 @@ opt_set TEMP_SENSOR_BED 1
|
|||
opt_set POWER_SUPPLY 1
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING \
|
||||
SDSUPPORT EEPROM_SETTINGS FAST_FILE_TRANSFER \
|
||||
REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST \
|
||||
BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL PINS_DEBUGGING \
|
||||
SDSUPPORT EEPROM_SETTINGS REPRAP_DISCOUNT_SMART_CONTROLLER \
|
||||
BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL \
|
||||
NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR FILAMENT_RUNOUT_DISTANCE_MM \
|
||||
AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
|
||||
SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
|
||||
opt_enable_adv FWRETRACT ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
|
||||
POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \
|
||||
SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
|
||||
FWRETRACT ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
|
||||
POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE FAST_FILE_TRANSFER \
|
||||
LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST PINS_DEBUGGING \
|
||||
MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING
|
||||
opt_set_adv FANMUX0_PIN 53
|
||||
opt_set FANMUX0_PIN 53
|
||||
exec_test $1 $2 "RAMPS with 2 extruders, RRDFGSC, Linear ABL, LEDs, and many options"
|
||||
|
||||
#
|
||||
|
|
@ -55,8 +55,8 @@ opt_set TEMP_SENSOR_3 20
|
|||
opt_set TEMP_SENSOR_4 999
|
||||
opt_set TEMP_SENSOR_BED 1
|
||||
opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \
|
||||
EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
||||
opt_enable_adv USB_FLASH_DRIVE_SUPPORT SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI \
|
||||
EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT \
|
||||
USB_FLASH_DRIVE_SUPPORT SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI \
|
||||
CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION
|
||||
exec_test $1 $2 "Azteeg X3 with 5 extruders, RRDFGSC, probeless UBL, Linear Advance, and more"
|
||||
|
||||
|
|
@ -66,7 +66,7 @@ exec_test $1 $2 "Azteeg X3 with 5 extruders, RRDFGSC, probeless UBL, Linear Adva
|
|||
opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
|
||||
opt_set LCD_LANGUAGE jp-kana
|
||||
opt_disable SEGMENT_LEVELED_MOVES
|
||||
opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET
|
||||
opt_enable BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET
|
||||
exec_test $1 $2 "... Sled Z Probe, Skew, UBL Cartesian moves, Japanese, and Z probe BABYSTEPPING"
|
||||
|
||||
#
|
||||
|
|
@ -77,7 +77,7 @@ restore_configs
|
|||
opt_enable ZONESTAR_LCD Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \
|
||||
AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
|
||||
opt_set NUM_SERVOS 1
|
||||
opt_enable_adv NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET
|
||||
opt_enable NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET
|
||||
exec_test $1 $2 "RAMPS with ZONESTAR_LCD, Servo Probe, 3-Point ABL, DEBUG_LEVELING_FEATURE, EEPROM, G38, and more"
|
||||
|
||||
#
|
||||
|
|
@ -97,12 +97,12 @@ opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LE
|
|||
M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR \
|
||||
INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
|
||||
ULTIMAKERCONTROLLER SDSUPPORT \
|
||||
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
|
||||
opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS \
|
||||
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 \
|
||||
BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS \
|
||||
ADVANCED_PAUSE_FEATURE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES PARK_HEAD_ON_PAUSE \
|
||||
LCD_INFO_MENU M114_DETAIL
|
||||
opt_set_adv PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }"
|
||||
opt_set_adv I2C_SLAVE_ADDRESS 63
|
||||
opt_set PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }"
|
||||
opt_set I2C_SLAVE_ADDRESS 63
|
||||
exec_test $1 $2 "MINIRAMBO for PWM_MOTOR_CURRENT etc"
|
||||
|
||||
#
|
||||
|
|
@ -122,8 +122,7 @@ restore_configs
|
|||
opt_set MOTHERBOARD BOARD_RUMBA
|
||||
opt_set EXTRUDERS 2
|
||||
opt_set TEMP_SENSOR_1 1
|
||||
opt_enable USE_XMAX_PLUG
|
||||
opt_enable_adv DUAL_X_CARRIAGE
|
||||
opt_enable USE_XMAX_PLUG DUAL_X_CARRIAGE
|
||||
exec_test $1 $2 "DUAL_X_CARRIAGE"
|
||||
|
||||
#
|
||||
|
|
@ -154,15 +153,15 @@ opt_enable COREYX USE_XMAX_PLUG \
|
|||
REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT \
|
||||
FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR \
|
||||
ENDSTOP_INTERRUPTS_FEATURE ENDSTOP_NOISE_THRESHOLD FAN_SOFT_PWM SDSUPPORT \
|
||||
SWITCHING_TOOLHEAD NUM_SERVOS DEBUG_LEVELING_FEATURE
|
||||
opt_set_adv FAN_MIN_PWM 50
|
||||
opt_set_adv FAN_KICKSTART_TIME 100
|
||||
opt_set_adv XY_FREQUENCY_LIMIT 15
|
||||
opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
|
||||
SWITCHING_TOOLHEAD NUM_SERVOS DEBUG_LEVELING_FEATURE \
|
||||
SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
|
||||
ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK \
|
||||
VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
|
||||
EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS \
|
||||
MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
|
||||
opt_set FAN_MIN_PWM 50
|
||||
opt_set FAN_KICKSTART_TIME 100
|
||||
opt_set XY_FREQUENCY_LIMIT 15
|
||||
exec_test $1 $2 "Many less common options"
|
||||
|
||||
######## Other Standard LCD/Panels ##############
|
||||
|
|
@ -196,12 +195,11 @@ exec_test $1 $2 "Many less common options"
|
|||
# G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
|
||||
#
|
||||
#restore_configs
|
||||
#opt_enable G3D_PANEL SDSUPPORT
|
||||
#opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
|
||||
#opt_set_adv SDSORT_GCODE true
|
||||
#opt_set_adv SDSORT_USES_RAM true
|
||||
#opt_set_adv SDSORT_USES_STACK true
|
||||
#opt_set_adv SDSORT_CACHE_NAMES true
|
||||
#opt_enable G3D_PANEL SDSUPPORT SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
|
||||
#opt_set SDSORT_GCODE true
|
||||
#opt_set SDSORT_USES_RAM true
|
||||
#opt_set SDSORT_USES_STACK true
|
||||
#opt_set SDSORT_CACHE_NAMES true
|
||||
#exec_test $1 $2 "Stuff"
|
||||
#
|
||||
# REPRAPWORLD_KEYPAD
|
||||
|
|
@ -297,12 +295,12 @@ exec_test $1 $2 "Delta Config (FLSUN AC because it's complex)"
|
|||
#
|
||||
use_example_configs SCARA
|
||||
opt_enable USE_ZMIN_PLUG FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR PAUSE_BEFORE_DEPLOY_STOW \
|
||||
EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
|
||||
EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER \
|
||||
MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING
|
||||
opt_set X_DRIVER_TYPE TMC2130
|
||||
opt_set Y_DRIVER_TYPE TMC2130
|
||||
opt_set Z_DRIVER_TYPE TMC2130
|
||||
opt_set E0_DRIVER_TYPE TMC2130
|
||||
opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING
|
||||
exec_test $1 $2 "SCARA with TMC2130"
|
||||
#
|
||||
# TMC2208 Config
|
||||
|
|
@ -313,8 +311,7 @@ opt_set Y_DRIVER_TYPE TMC2208
|
|||
opt_set Z_DRIVER_TYPE TMC2208
|
||||
opt_set E0_DRIVER_TYPE TMC2208
|
||||
opt_disable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
opt_enable REPRAPWORLD_KEYPAD
|
||||
opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG
|
||||
opt_enable REPRAPWORLD_KEYPAD MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG
|
||||
exec_test $1 $2 "TMC2208 Config"
|
||||
#
|
||||
# tvrrug Config need to check board type for sanguino atmega644p
|
||||
|
|
|
|||
|
|
@ -23,9 +23,9 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT \
|
|||
FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY \
|
||||
FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
|
||||
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
|
||||
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER
|
||||
opt_enable_adv ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE
|
||||
opt_set_adv I2C_SLAVE_ADDRESS 63
|
||||
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER \
|
||||
ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE
|
||||
opt_set I2C_SLAVE_ADDRESS 63
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
exec_test $1 $2 "Teensy3.5 with many features"
|
||||
|
||||
|
|
@ -33,9 +33,7 @@ exec_test $1 $2 "Teensy3.5 with many features"
|
|||
# Test a Sled Z Probe with Linear leveling
|
||||
#
|
||||
restore_configs
|
||||
opt_enable EEPROM_SETTINGS \
|
||||
Z_PROBE_SLED AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE
|
||||
opt_enable_adv GCODE_MACROS
|
||||
opt_enable EEPROM_SETTINGS Z_PROBE_SLED AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
|
||||
exec_test $1 $2 "Sled Z Probe with Linear leveling"
|
||||
|
||||
#
|
||||
|
|
@ -49,8 +47,8 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling"
|
|||
#
|
||||
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
|
||||
#
|
||||
# opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
|
||||
# opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
|
||||
# opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS \
|
||||
# EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
|
||||
# exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES"
|
||||
|
||||
#
|
||||
|
|
@ -94,9 +92,9 @@ exec_test $1 $2 "COREXZ"
|
|||
# Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS
|
||||
#
|
||||
restore_configs
|
||||
opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
||||
opt_enable Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
||||
pins_set RAMPS X_MAX_PIN -1
|
||||
opt_add_adv Z2_MAX_PIN 2
|
||||
opt_add Z2_MAX_PIN 2
|
||||
opt_enable USE_XMAX_PLUG
|
||||
exec_test $1 $2 "Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS"
|
||||
|
||||
|
|
|
|||
Reference in a new issue