diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index d06f2cc53..0ba59bdb6 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index b39403b64..627747753 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
index 778331661..aa729faaa 100644
--- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
index d304a0cc6..14481395b 100644
--- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 4363b13a7..01709226b 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
index d908190de..bdf8bf55c 100644
--- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
+++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -603,8 +603,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
index 7daa951f4..cf47d26a8 100644
--- a/config/examples/Alfawise/U20/Configuration_adv.h
+++ b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index ef75f141d..fd301b694 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index a4219dde1..eff097caa 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index a4219dde1..eff097caa 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index adf542373..84d89395c 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index 19a638f21..4105782fd 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index 8e55b2290..92f5fe3a8 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h
index ec4f3bcc1..f347c161a 100644
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index b7209024d..221f945ae 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index 938dee2c9..b34a15f8e 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -606,8 +606,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index 3743e6e8a..5e7b56fcf 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index af8b336a6..48f3325d2 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 639dec620..a9727ebbd 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 824c6059b..2fa88aed5 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 639dec620..a9727ebbd 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index ac6b30224..9e57c85c7 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index a33448de2..3d15f58aa 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index 1f3fffd9a..5c99b692f 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index 063103689..13dbd86cf 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index 80ce0971c..a7a38f9a4 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h
index 40c008dfb..2cfb90ada 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
+++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h
index 0ded478ad..d205aca8e 100644
--- a/config/examples/Creality/CR-20/Configuration_adv.h
+++ b/config/examples/Creality/CR-20/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index c0786a08c..02531657d 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index 0e0328dc0..5daba654f 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index 0fdaf6637..e2e8e4d07 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 807b20803..09569215e 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h
index fde1f25cc..2029812ea 100644
--- a/config/examples/Creality/Ender-5/Configuration_adv.h
+++ b/config/examples/Creality/Ender-5/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index 760e1f142..81ad79e7b 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
index ac355e2cb..910b5655a 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h	
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index 878b43b44..e404c82e8 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h
index b6f39c760..5ad08b99e 100644
--- a/config/examples/FYSETC/AIO_II/Configuration_adv.h
+++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
index 12c5ed118..9cc8ef563 100644
--- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h	
+++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
index 12c5ed118..9cc8ef563 100644
--- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h	
+++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
index 12c5ed118..9cc8ef563 100644
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
index 12c5ed118..9cc8ef563 100644
--- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h
index 9966b87bf..a835d3a22 100644
--- a/config/examples/FYSETC/F6_13/Configuration_adv.h
+++ b/config/examples/FYSETC/F6_13/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index 614d605eb..eb36a3a6c 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index 6b2cdd116..e3d09fafc 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 5effd2008..104a90546 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index f56014e66..5867d60a8 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index e2aefb530..9827e26a6 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -606,8 +606,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 8a022c3cc..dac0e9e71 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -606,8 +606,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index 7eeec42a7..3bb556b4c 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index b0f08ee6a..8c5c123d4 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index 352abf998..2f6b3c195 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 11debe093..b39c4ed64 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 7eeec42a7..3bb556b4c 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 7eeec42a7..3bb556b4c 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h
index 5bec81b1e..34948a79a 100644
--- a/config/examples/HMS434/Configuration_adv.h
+++ b/config/examples/HMS434/Configuration_adv.h
@@ -594,8 +594,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index 50e285152..b6756a634 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h
index c09d35acc..91b289bfc 100644
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@@ -607,8 +607,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index afd04fc8c..5f4c2067e 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h
index c09d35acc..91b289bfc 100644
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@@ -607,8 +607,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index d28b65587..5bbef202e 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 6c8854b1d..1c9ddcc9d 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index 2346d9b0b..2bdfc2cf3 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index a23d8cfda..b2c2de4f1 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index 493dc21ef..22982e2a1 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index bc1cfb38f..3f66cd88f 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index bb9d2c421..7f81fa0d1 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index 13d112d9c..b6b6c0ac1 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index 555b4f940..3f953d243 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index aff364398..a738a4886 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index c96c9287b..3f064a49e 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h
index 9de7fa2be..ab05f960e 100644
--- a/config/examples/Tevo/Michelangelo/Configuration_adv.h
+++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
index 59d171a58..5a9889165 100755
--- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
+++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
index d860f4491..19e605c87 100755
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
index d860f4491..19e605c87 100755
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index 7271f212a..579d69df5 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 7df8e8728..2e80fae0e 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 418e267e2..6ec87b944 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index a4990e913..ae1f35300 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 3a3784145..a8f8af17b 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 84ccae24b..101dc42ed 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index 07fc188f6..c9ae4c639 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index bc9f4886c..b4021204f 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -615,8 +615,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index 5d4c64ab2..fc32a6eba 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index 2b32e9f16..f5d4f1f4d 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 5bfe7b8b8..73308254b 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
index 1691f9e97..0ab060a2c 100644
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index 3a99c5ce9..561edee0a 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
index 61bc4d581..61a651a4b 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
index 61bc4d581..61a651a4b 100644
--- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index bb264a8a9..5a3a16981 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index bb264a8a9..5a3a16981 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 3c6dbf809..a653ba873 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index 0b4f164c1..d5967de29 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 88e06eb1d..efb13d920 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index 4d8b50391..78834e483 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h	
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index 3c6dbf809..a653ba873 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index 3c6dbf809..a653ba873 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index cad45802d..69a1f708d 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 85cf6c523..e3c122fd7 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index 3737d8c93..d61fbed6a 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index c59351655..36a4b041d 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index d38f743c3..46bd41420 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -602,8 +602,8 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
-  #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+  #define Z_STEPPER_ALIGN_X {  10, 150, 290 }
+  #define Z_STEPPER_ALIGN_Y { 290,  10, 290 }
   // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
   // Enable to restore leveling setup after operation