heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.

This commit is contained in:
Bernhard 2011-12-09 17:06:56 +01:00
parent b1d84d879b
commit 88ee053af0
3 changed files with 25 additions and 12 deletions

View file

@ -58,11 +58,11 @@
#define BED_CHECK_INTERVAL 5000 //ms #define BED_CHECK_INTERVAL 5000 //ms
//// Experimental watchdog and minimal temp //// Heating sanity check:
// The watchdog waits for the watchperiod in milliseconds whenever an M104 or M109 increases the target temperature // This waits for the watchperiod in milliseconds whenever an M104 or M109 increases the target temperature
// If the temperature has not increased at the end of that period, the target temperature is set to zero. It can be reset with another M104/M109 // If the temperature has not increased at the end of that period, the target temperature is set to zero.
/// CURRENTLY NOT IMPLEMENTED AND UNUSEABLE // It can be reset with another M104/M109
//#define WATCHPERIOD 5000 //5 seconds //#define WATCHPERIOD 20000 //20 seconds
// Actual temperature must be close to target for this long before M109 returns success // Actual temperature must be close to target for this long before M109 returns success
//#define TEMP_RESIDENCY_TIME 20 // (seconds) //#define TEMP_RESIDENCY_TIME 20 // (seconds)

View file

@ -88,7 +88,7 @@ static unsigned long previous_millis_bed_heater;
#endif //PIDTEMP #endif //PIDTEMP
#ifdef WATCHPERIOD #ifdef WATCHPERIOD
static int watch_raw[3] = {-1000,-1000,-1000}; static int watch_oldtemp[3] = {0,0,0};
static unsigned long watchmillis = 0; static unsigned long watchmillis = 0;
#endif //WATCHPERIOD #endif //WATCHPERIOD
@ -187,6 +187,19 @@ void manage_heater()
} }
#endif #endif
#ifdef WATCHPERIOD
if(watchmillis && millis() - watchmillis > WATCHPERIOD){
if(watch_oldtemp[TEMPSENSOR_HOTEND_0] >= degHotend(active_extruder)){
setTargetHotend(0,active_extruder);
LCD_MESSAGEPGM("Heating failed");
SERIAL_ECHO_START;
SERIAL_ECHOLN("Heating failed");
}else{
watchmillis = 0;
}
}
#endif
if(millis() - previous_millis_bed_heater < BED_CHECK_INTERVAL) if(millis() - previous_millis_bed_heater < BED_CHECK_INTERVAL)
return; return;
previous_millis_bed_heater = millis(); previous_millis_bed_heater = millis();
@ -426,7 +439,7 @@ void setWatch()
if(isHeatingHotend0()) if(isHeatingHotend0())
{ {
watchmillis = max(1,millis()); watchmillis = max(1,millis());
watch_raw[TEMPSENSOR_HOTEND_0] = current_raw[TEMPSENSOR_HOTEND_0]; watch_oldtemp[TEMPSENSOR_HOTEND_0] = degHotend(0);
} }
else else
{ {

View file

@ -49,10 +49,10 @@ extern float Kp,Ki,Kd,Kc;
extern float pid_setpoint ; extern float pid_setpoint ;
#endif #endif
#ifdef WATCHPERIOD // #ifdef WATCHPERIOD
extern int watch_raw[3] ; // extern int watch_raw[3] ;
extern unsigned long watchmillis; // extern unsigned long watchmillis;
#endif // #endif