From 91bea433328568e6da2659141a37a926689aa9b4 Mon Sep 17 00:00:00 2001
From: blddk <michael.andresen@gmail.com>
Date: Fri, 22 Mar 2013 18:29:47 +0100
Subject: [PATCH] Added rumba pinout

---
 Marlin/pins.h | 87 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/Marlin/pins.h b/Marlin/pins.h
index f1babfa70..6191ed288 100644
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@@ -979,6 +979,93 @@
 
 #endif
 
+
+/****************************************************************************************
+* RUMBA pin assignment
+*
+****************************************************************************************/
+#if MOTHERBOARD == 80
+#define KNOWN_BOARD 1
+
+#ifndef __AVR_ATmega2560__
+ #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+#endif
+
+#define X_STEP_PIN         17
+#define X_DIR_PIN          16
+#define X_ENABLE_PIN       48
+#define X_MIN_PIN          37
+#define X_MAX_PIN          36 
+
+#define Y_STEP_PIN         54
+#define Y_DIR_PIN          47 
+#define Y_ENABLE_PIN       55
+#define Y_MIN_PIN          35
+#define Y_MAX_PIN          34 
+
+#define Z_STEP_PIN         57 
+#define Z_DIR_PIN          56
+#define Z_ENABLE_PIN       62 
+#define Z_MIN_PIN          33
+#define Z_MAX_PIN          32
+
+#define E0_STEP_PIN        23
+#define E0_DIR_PIN         22
+#define E0_ENABLE_PIN      24
+
+#define E1_STEP_PIN        26
+#define E1_DIR_PIN         25
+#define E1_ENABLE_PIN      27
+
+#define E2_STEP_PIN        29
+#define E2_DIR_PIN         28
+#define E2_ENABLE_PIN      39
+
+#define LED_PIN            13
+
+#define FAN_PIN            7 
+//additional FAN1 PIN (e.g. useful for electronics fan or light on/off) on PIN 8
+
+#define PS_ON_PIN          45
+#define KILL_PIN           46
+
+#define HEATER_0_PIN       2    // EXTRUDER 1
+#define HEATER_1_PIN       3    // EXTRUDER 2
+#define HEATER_2_PIN       6    // EXTRUDER 3
+//optional FAN1 can be used as 4th heater output: #define HEATER_3_PIN       8    // EXTRUDER 4
+#define HEATER_BED_PIN     9    // BED
+
+#define TEMP_0_PIN         15   // ANALOG NUMBERING
+#define TEMP_1_PIN         14   // ANALOG NUMBERING
+#define TEMP_2_PIN         13   // ANALOG NUMBERING
+//optional for extruder 4 or chamber: #define TEMP_2_PIN         12   // ANALOG NUMBERING
+#define TEMP_BED_PIN       11   // ANALOG NUMBERING
+
+#define SDPOWER            -1
+#define SDSS               53
+#define SDCARDDETECT       49
+#define BEEPER             44
+#define LCD_PINS_RS        19 
+#define LCD_PINS_ENABLE    42
+#define LCD_PINS_D4        18
+#define LCD_PINS_D5        38 
+#define LCD_PINS_D6        41
+#define LCD_PINS_D7        40
+#define BTN_EN1            11
+#define BTN_EN2            12
+#define BTN_ENC            43
+//encoder rotation values
+#define BLEN_C 2
+#define BLEN_B 1
+#define BLEN_A 0
+#define encrot0 0
+#define encrot1 2
+#define encrot2 3
+#define encrot3 1
+
+#endif //MOTHERBOARD==80
+
+
 /****************************************************************************************
 * Teensylu 0.7 / Printrboard pin assignments (AT90USB1286)
 * Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE!