Merge pull request #11692 from thinkyhead/bf2_teensy_and_servos

[2.0.x] Don't test servos for Teensy 3.5/3.6
This commit is contained in:
Scott Lahteine 2018-09-01 15:07:09 -05:00 committed by GitHub
commit 92069f1422
Signed by: GitHub
GPG key ID: 4AEE18F83AFDEB23
13 changed files with 111 additions and 81 deletions

View file

@ -53,11 +53,11 @@ jobs:
# Generate custom version include # Generate custom version include
generate_version_header_for_marlin ./Marlin/src/inc generate_version_header_for_marlin ./Marlin/src/inc
cat ./Marlin/src/inc/_Version.h cat ./Marlin/src/inc/_Version.h
# #
# Backup pins_RAMPS.h # Back up the environment
#
cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
# #
env_backup
################################# #################################
# Build all sample configurations # Build all sample configurations
@ -279,6 +279,10 @@ jobs:
# Remove temp files from dependencies tree prior to caching # Remove temp files from dependencies tree prior to caching
rm -rf ~/Marlin/.piolibdeps/_tmp_* rm -rf ~/Marlin/.piolibdeps/_tmp_*
#
# Restore the environment
#
env_restore
- save_cache: - save_cache:

View file

@ -607,14 +607,47 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
#error "SWITCHING_NOZZLE requires exactly 2 EXTRUDERS." #error "SWITCHING_NOZZLE requires exactly 2 EXTRUDERS."
#elif NUM_SERVOS < 1 #elif NUM_SERVOS < 1
#error "SWITCHING_NOZZLE requires NUM_SERVOS >= 1." #error "SWITCHING_NOZZLE requires NUM_SERVOS >= 1."
#elif SWITCHING_NOZZLE_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
#error "SERVO0_PIN must be defined for your SWITCHING_NOZZLE."
#elif SWITCHING_NOZZLE_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
#error "SERVO1_PIN must be defined for your SWITCHING_NOZZLE."
#elif SWITCHING_NOZZLE_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
#error "SERVO2_PIN must be defined for your SWITCHING_NOZZLE."
#elif SWITCHING_NOZZLE_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
#error "SERVO3_PIN must be defined for your SWITCHING_NOZZLE."
#endif #endif
#endif #endif
/** /**
* Single Stepper Dual Extruder with switching servo * Single Stepper Dual Extruder with switching servo
*/ */
#if ENABLED(SWITCHING_EXTRUDER) && NUM_SERVOS < 1 #if ENABLED(SWITCHING_EXTRUDER)
#error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1." #if NUM_SERVOS < 1
#error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1."
#elif SWITCHING_EXTRUDER_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
#error "SERVO0_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
#error "SERVO1_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
#error "SERVO2_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
#error "SERVO3_PIN must be defined for your SWITCHING_EXTRUDER."
#endif
#if EXTRUDERS > 3
#if NUM_SERVOS < 2
#error "SWITCHING_EXTRUDER with 4 extruders requires NUM_SERVOS >= 2."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
#error "SERVO0_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
#error "SERVO1_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
#error "SERVO2_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
#error "SERVO3_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == SWITCHING_EXTRUDER_SERVO_NR
#error "SWITCHING_EXTRUDER_E23_SERVO_NR should be a different extruder from SWITCHING_EXTRUDER_SERVO_NR."
#endif
#endif
#endif #endif
/** /**

View file

@ -139,7 +139,7 @@ D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM
#endif #endif
#endif #endif
#ifdef ULTRA_LCD #if ENABLED(ULTRA_LCD)
#define LCD_PINS_RS 40 #define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 41 #define LCD_PINS_ENABLE 41
#define LCD_PINS_D4 42 #define LCD_PINS_D4 42

View file

@ -2,13 +2,13 @@
[ -z "$1" ] || cd $1 [ -z "$1" ] || cd $1
if [ -d ".test" ]; then if [ -d .test ]; then
printf "\033[0;31mEnvironment backup already exists!\033[0m\n" printf "\033[0;31mEnvironment backup already exists!\033[0m\n"
else else
mkdir .test mkdir .test
cp -r Marlin/src/pins .test/pins
cp Marlin/Configuration*.h .test/ cp Marlin/Configuration*.h .test/
[ -f Marlin/_Bootscreen.h ] && cp Marlin/_Bootscreen.h .test/ [ -f Marlin/_Bootscreen.h ] && cp Marlin/_Bootscreen.h .test/
[ -f Marlin/_Statusscreen.h ] && cp Marlin/_Statusscreen.h .test/ [ -f Marlin/_Statusscreen.h ] && cp Marlin/_Statusscreen.h .test/
cp -r Marlin/src/pins .test/pins
printf "\033[0;32mEnvironment Backup created\033[0m\n" printf "\033[0;32mEnvironment Backup created\033[0m\n"
fi fi

View file

@ -2,25 +2,10 @@
[ -z "$1" ] || cd $1 [ -z "$1" ] || cd $1
if [ -d ".test" ]; then cp Marlin/src/config/default/* Marlin/
cp .test/Configuration*.h Marlin/ [ -f Marlin/_Bootscreen.h ] && rm Marlin/_Bootscreen.h
rm .test/Configuration*.h [ -f Marlin/_Statusscreen.h ] && rm Marlin/_Statusscreen.h
[ -d .test/pins ] && { cp .test/pins/* Marlin/src/pins/ ; rm -rf .test/pins ; }
[ -d .test ] && rm -r .test
if [ -f .test/_Bootscreen.h ]; then printf "\033[0;32mEnvironment Restored\033[0m\n"
cp .test/_Bootscreen.h Marlin/
rm .test/_Bootscreen.h
fi
if [ -f .test/_Statusscreen.h ]; then
cp .test/_Statusscreen.h Marlin/
rm .test/_Statusscreen.h
fi
cp -r .test/pins Marlin/src
rm -r .test/pins
rmdir .test
printf "\033[0;32mEnvironment Restored\033[0m\n"
else
printf "\033[0;31mEnvironment Backup not available!\033[0m\n"
fi

View file

@ -1,17 +1,15 @@
#!/usr/bin/env bash #!/usr/bin/env bash
#
# restore_configs
#
# Restore default configs, delete pins backup and dogm bitmaps
#
cp Marlin/src/config/default/Configuration.h Marlin/Configuration.h # Restore the (possibly modified) Configurations
cp Marlin/src/config/default/Configuration_adv.h Marlin/Configuration_adv.h [ -d ".test" -a -f ".test/Configuration.h" ] && cp .test/Configuration*.h Marlin/
if [ -f Marlin/src/pins/pins_RAMPS.h.backup ]; then # Restore the original unmodified pins
cp Marlin/src/pins/pins_RAMPS.h.backup Marlin/src/pins/pins_RAMPS.h [ -d ".test/pins" ] && cp -r .test/pins Marlin/src/pins/
rm Marlin/src/pins/pins_RAMPS.h.backup
fi
if [ -f Marlin/_Bootscreen.h ]; then # Delete DOGM bitmaps
rm Marlin/_Bootscreen.h rm -f Marlin/_*screen.h
fi
if [ -f Marlin/_Statusscreen.h ]; then
rm Marlin/_Statusscreen.h
fi

View file

@ -1,4 +1,3 @@
#!/usr/bin/env bash #!/usr/bin/env bash
cp Marlin/Configuration.h Marlin/src/config/default/Configuration.h cp Marlin/Configuration*.h .test/
cp Marlin/Configuration_adv.h Marlin/src/config/default/Configuration_adv.h

View file

@ -3,9 +3,14 @@
# exit on first failure # exit on first failure
set -e set -e
restore_configs env_backup
opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB
update_defaults
opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS
opt_set E0_AUTO_FAN_PIN 8 opt_set E0_AUTO_FAN_PIN 8
opt_set EXTRUDER_AUTO_FAN_SPEED 100 opt_set EXTRUDER_AUTO_FAN_SPEED 100
exec_test $1 $2 "RAMPS4DUE_EFB S_CURVE_ACCELERATION EEPROM_SETTINGS" exec_test $1 $2 "RAMPS4DUE_EFB S_CURVE_ACCELERATION EEPROM_SETTINGS"
env_restore

View file

@ -3,8 +3,11 @@
# exit on first failure # exit on first failure
set -e set -e
restore_configs env_backup
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
update_defaults
exec_test $1 $2 "Build Re-ARM Default Configuration" exec_test $1 $2 "Build Re-ARM Default Configuration"
restore_configs restore_configs
@ -60,5 +63,4 @@ opt_enable FAN_SOFT_PWM SDSUPPORT
opt_enable USE_XMAX_PLUG opt_enable USE_XMAX_PLUG
exec_test $1 $2 "MKS SBASE Many less common options" exec_test $1 $2 "MKS SBASE Many less common options"
#clean up env_restore
restore_configs

View file

@ -3,10 +3,12 @@
# exit on first failure # exit on first failure
set -e set -e
restore_configs env_backup
opt_set MOTHERBOARD BOARD_STM32F1R opt_set MOTHERBOARD BOARD_STM32F1R
update_defaults
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT" exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT"
#cleanup env_restore
restore_configs

View file

@ -3,15 +3,13 @@
# exit on first failure # exit on first failure
set -e set -e
# env_backup
# Backup pins_RAMPS.h
#
cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
# #
# Build with the default configurations # Build with the default configurations
# #
restore_configs
exec_test $1 $2 "Default Configuration" exec_test $1 $2 "Default Configuration"
# #
# Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4 # Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4
# Test a "Fix Mounted" Probe with Safe Homing, some arc options, # Test a "Fix Mounted" Probe with Safe Homing, some arc options,
@ -311,5 +309,4 @@ exec_test $1 $2 "TMC2208 Config"
# #
# #
#clean up env_restore
restore_configs

View file

@ -1,11 +1,17 @@
#!/usr/bin/env bash #!/usr/bin/env bash
#
# start_tests
#
# Run one or more tests
#
export PATH="$PATH:$( cd "$(dirname "${BASH_SOURCE[0]}")" ; pwd -P )" export PATH="$PATH:$( cd "$(dirname "${BASH_SOURCE[0]}")" ; pwd -P )"
export PATH="$PATH:./buildroot/bin" export PATH="$PATH:./buildroot/bin"
# exit on first failure # exit on first failure
set -e set -e
exec_test () { exec_test() {
printf "\033[0;32m[Test $2] \033[0m$3... " printf "\033[0;32m[Test $2] \033[0m$3... "
if build_marlin_pio $1 "-e $2"; then if build_marlin_pio $1 "-e $2"; then
printf "\033[0;32mPassed\033[0m\n" printf "\033[0;32mPassed\033[0m\n"
@ -18,9 +24,6 @@ exec_test () {
} }
export -f exec_test export -f exec_test
env_backup
printf "Running \033[0;32m$2\033[0m Tests\n"
if [[ $3 = "--deep-clean" ]]; then if [[ $3 = "--deep-clean" ]]; then
echo "Deleting all PlatformIO caches, downloads and installed packages..." echo "Deleting all PlatformIO caches, downloads and installed packages..."
env_clean --deep env_clean --deep
@ -36,8 +39,9 @@ if [[ $2 = "ALL" ]]; then
$f $1 $testenv $f $1 $testenv
done done
else else
printf "Running \033[0;32m$2\033[0m Tests\n"
exec_test $1 "$2 --target clean" "Setup Build Environment" exec_test $1 "$2 --target clean" "Setup Build Environment"
$2_tests $1 $2 $2_tests $1 $2
fi fi
printf "\033[0;32mAll tests completed successfully\033[0m\n" printf "\033[0;32mAll tests completed successfully\033[0m\n"
env_restore

View file

@ -3,9 +3,11 @@
# exit on first failure # exit on first failure
set -e set -e
restore_configs env_backup
opt_set MOTHERBOARD BOARD_TEENSY35_36 opt_set MOTHERBOARD BOARD_TEENSY35_36
cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup update_defaults
# #
# Test Teensy3.5 with default config # Test Teensy3.5 with default config
# #
@ -37,17 +39,17 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling"
# #
# Test a Servo Probe # Test a Servo Probe
# #
restore_configs # restore_configs
opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE # opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
opt_set NUM_SERVOS 1 # opt_set NUM_SERVOS 1
opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS # opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
exec_test $1 $2 "Servo Probe" # exec_test $1 $2 "Servo Probe"
# #
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES # ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
# #
opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS # opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES # opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES" # exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES"
# #
# Test MESH_BED_LEVELING feature, with LCD # Test MESH_BED_LEVELING feature, with LCD
# #
@ -64,12 +66,12 @@ exec_test $1 $2 "Mixing Extruder"
# #
# Test SWITCHING_EXTRUDER # Test SWITCHING_EXTRUDER
# #
restore_configs # restore_configs
opt_set EXTRUDERS 2 # opt_set EXTRUDERS 2
opt_enable NUM_SERVOS # opt_enable NUM_SERVOS
opt_set NUM_SERVOS 1 # opt_set NUM_SERVOS 1
opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER # opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
exec_test $1 $2 "SWITCHING_EXTRUDER" # exec_test $1 $2 "SWITCHING_EXTRUDER"
# #
# Enable COREXY # Enable COREXY
# #
@ -92,5 +94,4 @@ opt_add_adv Z2_MAX_PIN 2
opt_enable USE_XMAX_PLUG opt_enable USE_XMAX_PLUG
exec_test $1 $2 "Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS" exec_test $1 $2 "Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS"
#cleanup env_restore
restore_configs