Tenlog D3 Hero 7-axis board (#18263)

This commit is contained in:
cbaugher 2020-06-11 20:43:28 -05:00 committed by GitHub
parent c12111e2cc
commit 92435ef5ea
Signed by: GitHub
GPG key ID: 4AEE18F83AFDEB23
4 changed files with 242 additions and 49 deletions

View file

@ -170,105 +170,110 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1100)
else ifeq ($(HARDWARE_MOTHERBOARD),1101)
# Velleman K8400 Controller (derived from 3Drag Controller)
else ifeq ($(HARDWARE_MOTHERBOARD),1102)
# 2PrintBeta BAM&DICE with STK drivers
# Velleman K8600 Controller (derived from 3Drag Controller)
else ifeq ($(HARDWARE_MOTHERBOARD),1103)
# 2PrintBeta BAM&DICE Due with STK drivers
# 2PrintBeta BAM&DICE with STK drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1104)
# MKS BASE v1.0
# 2PrintBeta BAM&DICE Due with STK drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1105)
# MKS v1.4 with A4982 stepper drivers
# MKS BASE v1.0
else ifeq ($(HARDWARE_MOTHERBOARD),1106)
# MKS v1.5 with Allegro A4982 stepper drivers
# MKS v1.4 with A4982 stepper drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1107)
# MKS v1.6 with Allegro A4982 stepper drivers
# MKS v1.5 with Allegro A4982 stepper drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1108)
# MKS BASE 1.0 with Heroic HR4982 stepper drivers
# MKS v1.6 with Allegro A4982 stepper drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1109)
# MKS GEN v1.3 or 1.4
# MKS BASE 1.0 with Heroic HR4982 stepper drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1110)
# MKS GEN L
# MKS GEN v1.3 or 1.4
else ifeq ($(HARDWARE_MOTHERBOARD),1111)
# zrib V2.0 control board (Chinese knock off RAMPS replica)
# MKS GEN L
else ifeq ($(HARDWARE_MOTHERBOARD),1112)
# BigTreeTech or BIQU KFB2.0
# zrib V2.0 control board (Chinese knock off RAMPS replica)
else ifeq ($(HARDWARE_MOTHERBOARD),1113)
# Felix 2.0+ Electronics Board (RAMPS like)
# BigTreeTech or BIQU KFB2.0
else ifeq ($(HARDWARE_MOTHERBOARD),1114)
# Invent-A-Part RigidBoard
# Felix 2.0+ Electronics Board (RAMPS like)
else ifeq ($(HARDWARE_MOTHERBOARD),1115)
# Invent-A-Part RigidBoard V2
# Invent-A-Part RigidBoard
else ifeq ($(HARDWARE_MOTHERBOARD),1116)
# Sainsmart 2-in-1 board
# Invent-A-Part RigidBoard V2
else ifeq ($(HARDWARE_MOTHERBOARD),1117)
# Ultimaker
# Sainsmart 2-in-1 board
else ifeq ($(HARDWARE_MOTHERBOARD),1118)
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
# Ultimaker
else ifeq ($(HARDWARE_MOTHERBOARD),1119)
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
else ifeq ($(HARDWARE_MOTHERBOARD),1120)
MCU ?= atmega1280
# Azteeg X3
else ifeq ($(HARDWARE_MOTHERBOARD),1120)
# Azteeg X3 Pro
else ifeq ($(HARDWARE_MOTHERBOARD),1121)
# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
# Azteeg X3 Pro
else ifeq ($(HARDWARE_MOTHERBOARD),1122)
# Rumba
# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
else ifeq ($(HARDWARE_MOTHERBOARD),1123)
# Raise3D Rumba
# Rumba
else ifeq ($(HARDWARE_MOTHERBOARD),1124)
# Rapide Lite RL200 Rumba
# Raise3D Rumba
else ifeq ($(HARDWARE_MOTHERBOARD),1125)
# Formbot T-Rex 2 Plus
# Rapide Lite RL200 Rumba
else ifeq ($(HARDWARE_MOTHERBOARD),1126)
# Formbot T-Rex 3
# Formbot T-Rex 2 Plus
else ifeq ($(HARDWARE_MOTHERBOARD),1127)
# Formbot Raptor
# Formbot T-Rex 3
else ifeq ($(HARDWARE_MOTHERBOARD),1128)
# Formbot Raptor 2
# Formbot Raptor
else ifeq ($(HARDWARE_MOTHERBOARD),1129)
# bq ZUM Mega 3D
# Formbot Raptor 2
else ifeq ($(HARDWARE_MOTHERBOARD),1130)
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
# bq ZUM Mega 3D
else ifeq ($(HARDWARE_MOTHERBOARD),1131)
# TriGorilla Anycubic version 1.3 based on RAMPS EFB
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
else ifeq ($(HARDWARE_MOTHERBOARD),1132)
# TriGorilla Anycubic version 1.4 based on RAMPS EFB
# TriGorilla Anycubic version 1.3 based on RAMPS EFB
else ifeq ($(HARDWARE_MOTHERBOARD),1133)
# TriGorilla Anycubic version 1.4 Rev 1.1
# TriGorilla Anycubic version 1.4 based on RAMPS EFB
else ifeq ($(HARDWARE_MOTHERBOARD),1134)
# Creality: Ender-4, CR-8
# TriGorilla Anycubic version 1.4 Rev 1.1
else ifeq ($(HARDWARE_MOTHERBOARD),1135)
# Creality: CR10S, CR20, CR-X
# Creality: Ender-4, CR-8
else ifeq ($(HARDWARE_MOTHERBOARD),1136)
# Dagoma F5
# Creality: CR10S, CR20, CR-X
else ifeq ($(HARDWARE_MOTHERBOARD),1137)
# FYSETC F6 1.3
# Dagoma F5
else ifeq ($(HARDWARE_MOTHERBOARD),1138)
# FYSETC F6 1.5
# FYSETC F6 1.3
else ifeq ($(HARDWARE_MOTHERBOARD),1139)
# Duplicator i3 Plus
# FYSETC F6 1.5
else ifeq ($(HARDWARE_MOTHERBOARD),1140)
# VORON
# Duplicator i3 Plus
else ifeq ($(HARDWARE_MOTHERBOARD),1141)
# TRONXY V3 1.0
# VORON
else ifeq ($(HARDWARE_MOTHERBOARD),1142)
# Z-Bolt X Series
# TRONXY V3 1.0
else ifeq ($(HARDWARE_MOTHERBOARD),1143)
# TT OSCAR
# Z-Bolt X Series
else ifeq ($(HARDWARE_MOTHERBOARD),1144)
# Overlord/Overlord Pro
# TT OSCAR
else ifeq ($(HARDWARE_MOTHERBOARD),1145)
# ADIMLab Gantry v1
# Overlord/Overlord Pro
else ifeq ($(HARDWARE_MOTHERBOARD),1146)
# ADIMLab Gantry v2
# ADIMLab Gantry v1
else ifeq ($(HARDWARE_MOTHERBOARD),1147)
# BIQU Tango V1
# ADIMLab Gantry v2
else ifeq ($(HARDWARE_MOTHERBOARD),1148)
# MKS GEN L V2
# BIQU Tango V1
else ifeq ($(HARDWARE_MOTHERBOARD),1149)
# Copymaster 3D
# MKS GEN L V2
else ifeq ($(HARDWARE_MOTHERBOARD),1150)
# Copymaster 3D
else ifeq ($(HARDWARE_MOTHERBOARD),1151)
# Ortur 4
else ifeq ($(HARDWARE_MOTHERBOARD),1152)
# Tenlog D3 Hero
else ifeq ($(HARDWARE_MOTHERBOARD),1153)
#
# RAMBo and derivatives

View file

@ -106,6 +106,7 @@
#define BOARD_MKS_GEN_L_V2 1150 // MKS GEN L V2
#define BOARD_COPYMASTER_3D 1151 // Copymaster 3D
#define BOARD_ORTUR_4 1152 // Ortur 4
#define BOARD_TENLOG_D3_HERO 1153 // Tenlog D3 Hero IDEX printer
//
// RAMBo and derivatives

View file

@ -194,6 +194,8 @@
#include "ramps/pins_COPYMASTER_3D.h" // ATmega2560 env:mega2560
#elif MB(ORTUR_4)
#include "ramps/pins_ORTUR_4.h" // ATmega2560 env:mega2560
#elif MB(TENLOG_D3_HERO)
#include "ramps/pins_TENLOG_D3_HERO.h" // ATmega2560 env:mega2560
//
// RAMBo and derivatives

View file

@ -0,0 +1,185 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Tenlog pin assignments
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#elif HOTENDS > 2 || E_STEPPERS > 2
#error "Tenlog supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_INFO_NAME "Tenlog D3 Hero"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
//
// Servos
//
#define SERVO0_PIN 11
#define SERVO1_PIN 6
#define SERVO2_PIN -1 // Original pin 5 used for hotend fans
#define SERVO3_PIN 4
//
// Limit Switches
//
#define X_MIN_PIN 3
#define X_MAX_PIN 2
#define Y_MIN_PIN 14
//#define Y_MAX_PIN 15 // Connected to "DJ" plug on extruder heads
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 15 // Ramps is normally 32
#endif
//
// Steppers
//
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
//#ifndef X_CS_PIN
//#define X_CS_PIN 53
//#endif
#define X2_STEP_PIN 36
#define X2_DIR_PIN 34
#define X2_ENABLE_PIN 30
//#ifndef X2_CS_PIN
//#define X2_CS_PIN 53
//#endif
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
//#ifndef Y_CS_PIN
//#define Y_CS_PIN 49
//#endif
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62
//#ifndef Z_CS_PIN
//#define Z_CS_PIN 40
//#endif
#define Z2_STEP_PIN 65
#define Z2_DIR_PIN 66
#define Z2_ENABLE_PIN 64
//#ifndef Z2_CS_PIN
//#define Z2_CS_PIN 40
//#endif
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
//#ifndef E0_CS_PIN
//define E0_CS_PIN 42
//#endif
#define E1_STEP_PIN 57
#define E1_DIR_PIN 58
#define E1_ENABLE_PIN 59
//#ifndef E1_CS_PIN
//define E1_CS_PIN 44
//#endif
//#define E2_STEP_PIN 42
//#define E2_DIR_PIN 43
//#define E2_ENABLE_PIN 44
//
// Temperature Sensors
//
#define TEMP_0_PIN 13 // Analog Input
#define TEMP_1_PIN 15 // Analog Input
#define TEMP_BED_PIN 14 // Analog Input
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN -1 // Don't use 53 if using Display/SD card
#else
#define MAX6675_SS_PIN -1 // Don't use 49 (SD_DETECT_PIN)
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 10
#define HEATER_1_PIN 11
#define HEATER_BED_PIN 8
#define FAN_PIN 9
#define FAN1_PIN 5 // Normall this would be a servo pin
// XXX Runout support unknown?
//#define NUM_RUNOUT_SENSORS 0
//#define FIL_RUNOUT_PIN 22
//#define FIL_RUNOUT2_PIN 21
//
// Misc. Functions
//
//#define CASE_LIGHT_PIN 5
#define SDSS 53
//#ifndef LED_PIN
//#define LED_PIN 13
//#endif
//#define SPINDLE_LASER_PWM_PIN -1 // Hardware PWM
//#define SPINDLE_LASER_ENA_PIN 4 // Pullup!
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
//#define FILWIDTH_PIN 5 // Analog Input
//
// LCD / Controller
//
//#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1
#define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1
//#define BTN_EN1 31
//#define BTN_EN2 33
//#define BTN_ENC 35
#define SD_DETECT_PIN 49
//#ifndef KILL_PIN
//#define KILL_PIN 41
//#endif
//#ifndef BEEPER_PIN
#define BEEPER_PIN -1
//#endif
//#endif // REPRAP_DISCOUNT_SMART_CONTROLLER