Merge pull request #10045 from Lenbok/2.0.x-monitor_chamber_temperature_and_auto_fan
[2.0.x] Monitor chamber temperature, with auto fan control.
This commit is contained in:
Scott Lahteine
commit
93524c1994
GPG key ID:
4AEE18F83AFDEB23
119 changed files with 261 additions and 14 deletions
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -242,9 +242,9 @@ typedef enum {
|
|||
|
||||
//find out which harware PWMs are already in use
|
||||
#if PIN_EXISTS(CONTROLLER_FAN)
|
||||
#define PWM_CHK_FAN_B(p) (p == CONTROLLER_FAN_PIN || p == E0_AUTO_FAN_PIN || p == E1_AUTO_FAN_PIN || p == E2_AUTO_FAN_PIN || p == E3_AUTO_FAN_PIN || p == E4_AUTO_FAN_PIN)
|
||||
#define PWM_CHK_FAN_B(p) (p == CONTROLLER_FAN_PIN || p == E0_AUTO_FAN_PIN || p == E1_AUTO_FAN_PIN || p == E2_AUTO_FAN_PIN || p == E3_AUTO_FAN_PIN || p == E4_AUTO_FAN_PIN || p == CHAMBER_AUTO_FAN_PIN)
|
||||
#else
|
||||
#define PWM_CHK_FAN_B(p) (p == E0_AUTO_FAN_PIN || p == E1_AUTO_FAN_PIN || p == E2_AUTO_FAN_PIN || p == E3_AUTO_FAN_PIN || p == E4_AUTO_FAN_PIN)
|
||||
#define PWM_CHK_FAN_B(p) (p == E0_AUTO_FAN_PIN || p == E1_AUTO_FAN_PIN || p == E2_AUTO_FAN_PIN || p == E3_AUTO_FAN_PIN || p == E4_AUTO_FAN_PIN || p == CHAMBER_AUTO_FAN_PIN)
|
||||
#endif
|
||||
|
||||
#if PIN_EXISTS(FAN) || PIN_EXISTS(FAN1) || PIN_EXISTS(FAN2)
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 7
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -317,6 +317,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 60
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -324,6 +324,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -317,6 +317,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 35
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -325,6 +325,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -321,6 +321,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1 // measured to be satisfactorily accurate on centre of bed within +/- 1 degC.
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -336,6 +336,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -324,6 +324,7 @@
|
|||
// For Malyan M150, some discussions around changing the TEMP_SENSOR_BED from 1 to 3 on a french discussion board.
|
||||
// The reasons are inconclusive so I leave at 1
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 11
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -319,6 +319,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -347,6 +347,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -317,6 +317,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 998
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 60
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -343,6 +343,7 @@
|
|||
#else
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#endif
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -336,6 +336,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -243,6 +243,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -321,6 +321,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 11
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -320,6 +320,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -235,6 +235,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -324,6 +324,7 @@
|
|||
// to print on glass. And I'm using a 400mm x 400mm silicon heat pad powered through
|
||||
// a Fortek SSR to do it. If you are using an unaltered gCreate machine, this needs
|
||||
// to be set to 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 12
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -317,6 +317,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 998
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 60
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 5
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@
|
|||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
|
|
|
|||
|
|
@ -230,6 +230,7 @@
|
|||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
|
|
|||
|
|
@ -389,6 +389,15 @@
|
|||
#define BED_USES_THERMISTOR
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_CHAMBER <= -2
|
||||
#error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_CHAMBER"
|
||||
#elif TEMP_SENSOR_CHAMBER == -1
|
||||
#define CHAMBER_USES_AD595
|
||||
#elif TEMP_SENSOR_CHAMBER > 0
|
||||
#define THERMISTORCHAMBER TEMP_SENSOR_CHAMBER
|
||||
#define CHAMBER_USES_THERMISTOR
|
||||
#endif
|
||||
|
||||
#ifdef __SAM3X8E__
|
||||
#define HEATER_USES_AD595 (ENABLED(HEATER_0_USES_AD595) || ENABLED(HEATER_1_USES_AD595) || ENABLED(HEATER_2_USES_AD595) || ENABLED(HEATER_3_USES_AD595))
|
||||
#endif
|
||||
|
|
@ -754,7 +763,8 @@
|
|||
#define HAS_TEMP_4 (PIN_EXISTS(TEMP_4) && TEMP_SENSOR_4 != 0 && TEMP_SENSOR_4 > -2)
|
||||
#define HAS_TEMP_HOTEND (HAS_TEMP_0 || ENABLED(HEATER_0_USES_MAX6675))
|
||||
#define HAS_TEMP_BED (PIN_EXISTS(TEMP_BED) && TEMP_SENSOR_BED != 0 && TEMP_SENSOR_BED > -2)
|
||||
#define HAS_TEMP_SENSOR (HAS_TEMP_HOTEND || HAS_TEMP_BED)
|
||||
#define HAS_TEMP_CHAMBER (PIN_EXISTS(TEMP_CHAMBER) && TEMP_SENSOR_CHAMBER != 0 && TEMP_SENSOR_CHAMBER > -2)
|
||||
#define HAS_TEMP_SENSOR (HAS_TEMP_HOTEND || HAS_TEMP_BED || HAS_TEMP_CHAMBER)
|
||||
|
||||
// Heaters
|
||||
#define HAS_HEATER_0 (PIN_EXISTS(HEATER_0))
|
||||
|
|
@ -775,7 +785,8 @@
|
|||
#define HAS_AUTO_FAN_2 (HOTENDS > 2 && PIN_EXISTS(E2_AUTO_FAN))
|
||||
#define HAS_AUTO_FAN_3 (HOTENDS > 3 && PIN_EXISTS(E3_AUTO_FAN))
|
||||
#define HAS_AUTO_FAN_4 (HOTENDS > 4 && PIN_EXISTS(E4_AUTO_FAN))
|
||||
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3)
|
||||
#define HAS_AUTO_CHAMBER_FAN (PIN_EXISTS(CHAMBER_AUTO_FAN))
|
||||
#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 || HAS_AUTO_CHAMBER_FAN)
|
||||
#define AUTO_1_IS_0 (E1_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
|
||||
#define AUTO_2_IS_0 (E2_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
|
||||
#define AUTO_2_IS_1 (E2_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
|
||||
|
|
@ -786,6 +797,11 @@
|
|||
#define AUTO_4_IS_1 (E4_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
|
||||
#define AUTO_4_IS_2 (E4_AUTO_FAN_PIN == E2_AUTO_FAN_PIN)
|
||||
#define AUTO_4_IS_3 (E4_AUTO_FAN_PIN == E3_AUTO_FAN_PIN)
|
||||
#define AUTO_CHAMBER_IS_0 (CHAMBER_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
|
||||
#define AUTO_CHAMBER_IS_1 (CHAMBER_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
|
||||
#define AUTO_CHAMBER_IS_2 (CHAMBER_AUTO_FAN_PIN == E2_AUTO_FAN_PIN)
|
||||
#define AUTO_CHAMBER_IS_3 (CHAMBER_AUTO_FAN_PIN == E3_AUTO_FAN_PIN)
|
||||
#define AUTO_CHAMBER_IS_4 (CHAMBER_AUTO_FAN_PIN == E4_AUTO_FAN_PIN)
|
||||
|
||||
// Other fans
|
||||
#define HAS_FAN0 (PIN_EXISTS(FAN))
|
||||
|
|
|
|||
|
|
@ -83,10 +83,12 @@ Temperature thermalManager;
|
|||
// public:
|
||||
|
||||
float Temperature::current_temperature[HOTENDS] = { 0.0 },
|
||||
Temperature::current_temperature_chamber = 0.0,
|
||||
Temperature::current_temperature_bed = 0.0;
|
||||
|
||||
int16_t Temperature::current_temperature_raw[HOTENDS] = { 0 },
|
||||
Temperature::target_temperature[HOTENDS] = { 0 },
|
||||
Temperature::current_temperature_chamber_raw = 0,
|
||||
Temperature::current_temperature_bed_raw = 0;
|
||||
|
||||
#if ENABLED(AUTO_POWER_E_FANS)
|
||||
|
|
@ -179,6 +181,7 @@ volatile bool Temperature::temp_meas_ready = false;
|
|||
#endif
|
||||
|
||||
uint16_t Temperature::raw_temp_value[MAX_EXTRUDERS] = { 0 },
|
||||
Temperature::raw_temp_chamber_value = 0,
|
||||
Temperature::raw_temp_bed_value = 0;
|
||||
|
||||
// Init min and max temp with extreme values to prevent false errors during startup
|
||||
|
|
@ -550,19 +553,22 @@ int Temperature::getHeaterPower(int heater) {
|
|||
#if HAS_AUTO_FAN
|
||||
|
||||
void Temperature::checkExtruderAutoFans() {
|
||||
static const pin_t fanPin[] PROGMEM = { E0_AUTO_FAN_PIN, E1_AUTO_FAN_PIN, E2_AUTO_FAN_PIN, E3_AUTO_FAN_PIN, E4_AUTO_FAN_PIN };
|
||||
static const pin_t fanPin[] PROGMEM = { E0_AUTO_FAN_PIN, E1_AUTO_FAN_PIN, E2_AUTO_FAN_PIN, E3_AUTO_FAN_PIN, E4_AUTO_FAN_PIN, CHAMBER_AUTO_FAN_PIN };
|
||||
static const uint8_t fanBit[] PROGMEM = {
|
||||
0,
|
||||
AUTO_1_IS_0 ? 0 : 1,
|
||||
AUTO_2_IS_0 ? 0 : AUTO_2_IS_1 ? 1 : 2,
|
||||
AUTO_3_IS_0 ? 0 : AUTO_3_IS_1 ? 1 : AUTO_3_IS_2 ? 2 : 3,
|
||||
AUTO_4_IS_0 ? 0 : AUTO_4_IS_1 ? 1 : AUTO_4_IS_2 ? 2 : AUTO_4_IS_3 ? 3 : 4
|
||||
AUTO_4_IS_0 ? 0 : AUTO_4_IS_1 ? 1 : AUTO_4_IS_2 ? 2 : AUTO_4_IS_3 ? 3 : 4,
|
||||
AUTO_CHAMBER_IS_0 ? 0 : AUTO_CHAMBER_IS_1 ? 1 : AUTO_CHAMBER_IS_2 ? 2 : AUTO_CHAMBER_IS_3 ? 3 : AUTO_CHAMBER_IS_4 ? 4 : 5
|
||||
};
|
||||
uint8_t fanState = 0;
|
||||
|
||||
HOTEND_LOOP()
|
||||
if (current_temperature[e] > EXTRUDER_AUTO_FAN_TEMPERATURE)
|
||||
SBI(fanState, pgm_read_byte(&fanBit[e]));
|
||||
if (current_temperature_chamber > EXTRUDER_AUTO_FAN_TEMPERATURE)
|
||||
SBI(fanState, pgm_read_byte(&fanBit[5]));
|
||||
|
||||
uint8_t fanDone = 0;
|
||||
for (uint8_t f = 0; f < COUNT(fanPin); f++) {
|
||||
|
|
@ -998,6 +1004,42 @@ float Temperature::analog2temp(const int raw, const uint8_t e) {
|
|||
}
|
||||
#endif // HAS_TEMP_BED
|
||||
|
||||
#if HAS_TEMP_CHAMBER
|
||||
// Derived from RepRap FiveD extruder::getTemperature()
|
||||
// For chamber temperature measurement.
|
||||
float Temperature::analog2tempChamber(const int raw) {
|
||||
#if ENABLED(CHAMBER_USES_THERMISTOR)
|
||||
float celsius = 0;
|
||||
byte i;
|
||||
|
||||
for (i = 1; i < CHAMBERTEMPTABLE_LEN; i++) {
|
||||
if (PGM_RD_W(CHAMBERTEMPTABLE[i][0]) > raw) {
|
||||
celsius = PGM_RD_W(CHAMBERTEMPTABLE[i - 1][1]) +
|
||||
(raw - PGM_RD_W(CHAMBERTEMPTABLE[i - 1][0])) *
|
||||
(float)(PGM_RD_W(CHAMBERTEMPTABLE[i][1]) - PGM_RD_W(CHAMBERTEMPTABLE[i - 1][1])) /
|
||||
(float)(PGM_RD_W(CHAMBERTEMPTABLE[i][0]) - PGM_RD_W(CHAMBERTEMPTABLE[i - 1][0]));
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
// Overflow: Set to last value in the table
|
||||
if (i == CHAMBERTEMPTABLE_LEN) celsius = PGM_RD_W(CHAMBERTEMPTABLE[i - 1][1]);
|
||||
|
||||
return celsius;
|
||||
|
||||
#elif defined(CHAMBER_USES_AD595)
|
||||
|
||||
return ((raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR) * (TEMP_SENSOR_AD595_GAIN)) + TEMP_SENSOR_AD595_OFFSET;
|
||||
|
||||
#else
|
||||
|
||||
UNUSED(raw);
|
||||
return 0;
|
||||
|
||||
#endif
|
||||
}
|
||||
#endif // HAS_TEMP_CHAMBER
|
||||
|
||||
/**
|
||||
* Get the raw values into the actual temperatures.
|
||||
* The raw values are created in interrupt context,
|
||||
|
|
@ -1013,6 +1055,9 @@ void Temperature::updateTemperaturesFromRawValues() {
|
|||
#if HAS_TEMP_BED
|
||||
current_temperature_bed = Temperature::analog2tempBed(current_temperature_bed_raw);
|
||||
#endif
|
||||
#if HAS_TEMP_CHAMBER
|
||||
current_temperature_chamber = Temperature::analog2tempChamber(current_temperature_chamber_raw);
|
||||
#endif
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
|
||||
redundant_temperature = Temperature::analog2temp(redundant_temperature_raw, 1);
|
||||
#endif
|
||||
|
|
@ -1076,7 +1121,7 @@ void Temperature::init() {
|
|||
inited = true;
|
||||
#endif
|
||||
|
||||
#if MB(RUMBA) && (TEMP_SENSOR_0 == -1 || TEMP_SENSOR_1 == -1 || TEMP_SENSOR_2 == -1 || TEMP_SENSOR_BED == -1)
|
||||
#if MB(RUMBA) && (TEMP_SENSOR_0 == -1 || TEMP_SENSOR_1 == -1 || TEMP_SENSOR_2 == -1 || TEMP_SENSOR_BED == -1 || TEMP_SENSOR_CHAMBER == -1)
|
||||
// Disable RUMBA JTAG in case the thermocouple extension is plugged on top of JTAG connector
|
||||
MCUCR = _BV(JTD);
|
||||
MCUCR = _BV(JTD);
|
||||
|
|
@ -1162,6 +1207,9 @@ void Temperature::init() {
|
|||
#if HAS_TEMP_BED
|
||||
HAL_ANALOG_SELECT(TEMP_BED_PIN);
|
||||
#endif
|
||||
#if HAS_TEMP_CHAMBER
|
||||
HAL_ANALOG_SELECT(TEMP_CHAMBER_PIN);
|
||||
#endif
|
||||
#if ENABLED(FILAMENT_WIDTH_SENSOR)
|
||||
HAL_ANALOG_SELECT(FILWIDTH_PIN);
|
||||
#endif
|
||||
|
|
@ -1227,6 +1275,16 @@ void Temperature::init() {
|
|||
SET_OUTPUT(E4_AUTO_FAN_PIN);
|
||||
#endif
|
||||
#endif
|
||||
#if HAS_AUTO_CHAMBER_FAN && !AUTO_CHAMBER_IS_0 && !AUTO_CHAMBER_IS_1 && !AUTO_CHAMBER_IS_2 && !AUTO_CHAMBER_IS_3 && ! AUTO_CHAMBER_IS_4
|
||||
#if CHAMBER_AUTO_FAN_PIN == FAN1_PIN
|
||||
SET_OUTPUT(CHAMBER_AUTO_FAN_PIN);
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
setPwmFrequency(CHAMBER_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||
#endif
|
||||
#else
|
||||
SET_OUTPUT(CHAMBER_AUTO_FAN_PIN);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// Wait for temperature measurement to settle
|
||||
delay(250);
|
||||
|
|
@ -1630,6 +1688,7 @@ void Temperature::set_current_temp_raw() {
|
|||
#endif
|
||||
#endif
|
||||
current_temperature_bed_raw = raw_temp_bed_value;
|
||||
current_temperature_chamber_raw = raw_temp_chamber_value;
|
||||
temp_meas_ready = true;
|
||||
}
|
||||
|
||||
|
|
@ -1994,6 +2053,15 @@ void Temperature::isr() {
|
|||
break;
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_CHAMBER
|
||||
case PrepareTemp_CHAMBER:
|
||||
HAL_START_ADC(TEMP_CHAMBER_PIN);
|
||||
break;
|
||||
case MeasureTemp_CHAMBER:
|
||||
raw_temp_chamber_value += ADC;
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if HAS_TEMP_1
|
||||
case PrepareTemp_1:
|
||||
HAL_START_ADC(TEMP_1_PIN);
|
||||
|
|
@ -2080,6 +2148,7 @@ void Temperature::isr() {
|
|||
|
||||
ZERO(raw_temp_value);
|
||||
raw_temp_bed_value = 0;
|
||||
raw_temp_chamber_value = 0;
|
||||
|
||||
#define TEMPDIR(N) ((HEATER_##N##_RAW_LO_TEMP) > (HEATER_##N##_RAW_HI_TEMP) ? -1 : 1)
|
||||
|
||||
|
|
@ -2191,15 +2260,17 @@ void Temperature::isr() {
|
|||
#if NUM_SERIAL > 1
|
||||
, const int8_t port=-1
|
||||
#endif
|
||||
, const int8_t e=-2
|
||||
, const int8_t e=-3
|
||||
) {
|
||||
#if !(HAS_TEMP_BED && HAS_TEMP_HOTEND) && HOTENDS <= 1
|
||||
#if !(HAS_TEMP_BED && HAS_TEMP_HOTEND && HAS_TEMP_CHAMBER) && HOTENDS <= 1
|
||||
UNUSED(e);
|
||||
#endif
|
||||
|
||||
SERIAL_PROTOCOLCHAR_P(port, ' ');
|
||||
SERIAL_PROTOCOLCHAR_P(port,
|
||||
#if HAS_TEMP_BED && HAS_TEMP_HOTEND
|
||||
#if HAS_TEMP_CHAMBER && HAS_TEMP_BED && HAS_TEMP_HOTEND
|
||||
e == -2 ? 'C' : e == -1 ? 'B' : 'T'
|
||||
#elif HAS_TEMP_BED && HAS_TEMP_HOTEND
|
||||
e == -1 ? 'B' : 'T'
|
||||
#elif HAS_TEMP_HOTEND
|
||||
'T'
|
||||
|
|
@ -2246,6 +2317,14 @@ void Temperature::isr() {
|
|||
, -1 // BED
|
||||
);
|
||||
#endif
|
||||
#if HAS_TEMP_CHAMBER
|
||||
print_heater_state(degChamber(), 0
|
||||
#if ENABLED(SHOW_TEMP_ADC_VALUES)
|
||||
, rawChamberTemp()
|
||||
#endif
|
||||
, -2 // CHAMBER
|
||||
);
|
||||
#endif
|
||||
#if HOTENDS > 1
|
||||
HOTEND_LOOP() print_heater_state(degHotend(e), degTargetHotend(e)
|
||||
#if ENABLED(SHOW_TEMP_ADC_VALUES)
|
||||
|
|
|
|||
|
|
@ -74,6 +74,10 @@ enum ADCSensorState : char {
|
|||
PrepareTemp_BED,
|
||||
MeasureTemp_BED,
|
||||
#endif
|
||||
#if HAS_TEMP_CHAMBER
|
||||
PrepareTemp_CHAMBER,
|
||||
MeasureTemp_CHAMBER,
|
||||
#endif
|
||||
#if ENABLED(FILAMENT_WIDTH_SENSOR)
|
||||
Prepare_FILWIDTH,
|
||||
Measure_FILWIDTH,
|
||||
|
|
@ -113,9 +117,11 @@ class Temperature {
|
|||
public:
|
||||
|
||||
static float current_temperature[HOTENDS],
|
||||
current_temperature_chamber,
|
||||
current_temperature_bed;
|
||||
static int16_t current_temperature_raw[HOTENDS],
|
||||
target_temperature[HOTENDS],
|
||||
current_temperature_chamber_raw,
|
||||
current_temperature_bed_raw;
|
||||
|
||||
#if ENABLED(AUTO_POWER_E_FANS)
|
||||
|
|
@ -244,6 +250,7 @@ class Temperature {
|
|||
#endif
|
||||
|
||||
static uint16_t raw_temp_value[MAX_EXTRUDERS],
|
||||
raw_temp_chamber_value,
|
||||
raw_temp_bed_value;
|
||||
|
||||
// Init min and max temp with extreme values to prevent false errors during startup
|
||||
|
|
@ -315,6 +322,9 @@ class Temperature {
|
|||
#if HAS_TEMP_BED
|
||||
static float analog2tempBed(const int raw);
|
||||
#endif
|
||||
#if HAS_TEMP_CHAMBER
|
||||
static float analog2tempChamber(const int raw);
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Called from the Temperature ISR
|
||||
|
|
@ -369,6 +379,7 @@ class Temperature {
|
|||
return current_temperature[HOTEND_INDEX];
|
||||
}
|
||||
FORCE_INLINE static float degBed() { return current_temperature_bed; }
|
||||
FORCE_INLINE static float degChamber() { return current_temperature_chamber; }
|
||||
|
||||
#if ENABLED(SHOW_TEMP_ADC_VALUES)
|
||||
FORCE_INLINE static int16_t rawHotendTemp(const uint8_t e) {
|
||||
|
|
@ -378,6 +389,7 @@ class Temperature {
|
|||
return current_temperature_raw[HOTEND_INDEX];
|
||||
}
|
||||
FORCE_INLINE static int16_t rawBedTemp() { return current_temperature_bed_raw; }
|
||||
FORCE_INLINE static int16_t rawChamberTemp() { return current_temperature_chamber_raw; }
|
||||
#endif
|
||||
|
||||
FORCE_INLINE static int16_t degTargetHotend(const uint8_t e) {
|
||||
|
|
|
|||
|
|
@ -47,6 +47,10 @@
|
|||
#define HEATER_BED_RAW_HI_TEMP 16383
|
||||
#define HEATER_BED_RAW_LO_TEMP 0
|
||||
#endif
|
||||
#if THERMISTORCHAMBER == 20
|
||||
#define HEATER_CHAMBER_RAW_HI_TEMP 16383
|
||||
#define HEATER_CHAMBER_RAW_LO_TEMP 0
|
||||
#endif
|
||||
const short temptable_20[][2] PROGMEM = {
|
||||
{ OV( 0), 0 },
|
||||
{ OV(227), 1 },
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@
|
|||
#define OVERSAMPLENR 16
|
||||
#define OV(N) int16_t((N) * (OVERSAMPLENR))
|
||||
|
||||
#define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n || THERMISTORHEATER_1 == n || THERMISTORHEATER_2 == n || THERMISTORHEATER_3 == n || THERMISTORHEATER_4 == n || THERMISTORBED == n)
|
||||
#define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n || THERMISTORHEATER_1 == n || THERMISTORHEATER_2 == n || THERMISTORHEATER_3 == n || THERMISTORHEATER_4 == n || THERMISTORBED == n || THERMISTORCHAMBER == n)
|
||||
|
||||
// Pt1000 and Pt100 handling
|
||||
//
|
||||
|
|
@ -190,6 +190,15 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef THERMISTORCHAMBER
|
||||
#define CHAMBERTEMPTABLE TT_NAME(THERMISTORCHAMBER)
|
||||
#define CHAMBERTEMPTABLE_LEN COUNT(CHAMBERTEMPTABLE)
|
||||
#else
|
||||
#ifdef CHAMBER_USES_THERMISTOR
|
||||
#error "No chamber thermistor table specified"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// Set the high and low raw values for the heaters
|
||||
// For thermistors the highest temperature results in the lowest ADC value
|
||||
// For thermocouples the highest temperature results in the highest ADC value
|
||||
|
|
@ -247,5 +256,14 @@
|
|||
#define HEATER_BED_RAW_LO_TEMP 0
|
||||
#endif
|
||||
#endif
|
||||
#ifndef HEATER_CHAMBER_RAW_HI_TEMP
|
||||
#ifdef CHAMBER_USES_THERMISTOR
|
||||
#define HEATER_CHAMBER_RAW_HI_TEMP 0
|
||||
#define HEATER_CHAMBER_RAW_LO_TEMP 16383
|
||||
#else
|
||||
#define HEATER_CHAMBER_RAW_HI_TEMP 16383
|
||||
#define HEATER_CHAMBER_RAW_LO_TEMP 0
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // THERMISTORS_H_
|
||||
|
|
|
|||
|
|
@ -618,6 +618,13 @@
|
|||
#define E4_AUTO_FAN_PIN -1
|
||||
#endif
|
||||
#endif
|
||||
#ifndef CHAMBER_AUTO_FAN_PIN
|
||||
#ifdef ORIG_CHAMBER_AUTO_FAN_PIN
|
||||
#define CHAMBER_AUTO_FAN_PIN ORIG_CHAMBER_AUTO_FAN_PIN
|
||||
#else
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
|
||||
#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, E0_MS1_PIN, E0_MS2_PIN, E0_CS_PIN,
|
||||
|
|
|
|||
|
|
@ -83,9 +83,6 @@
|
|||
#if PIN_EXISTS(TEMP_CHAMBER) && TEMP_CHAMBER_PIN < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(__LINE__, TEMP_CHAMBER_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(TEMP_X) && TEMP_X_PIN < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(__LINE__, TEMP_X_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(ADC_KEYPAD) && ADC_KEYPAD_PIN < NUM_ANALOG_INPUTS
|
||||
REPORT_NAME_ANALOG(__LINE__, ADC_KEYPAD_PIN)
|
||||
#endif
|
||||
|
|
@ -166,6 +163,9 @@
|
|||
#if PIN_EXISTS(CASE_LIGHT)
|
||||
REPORT_NAME_DIGITAL(__LINE__, CASE_LIGHT_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(CHAMBER_AUTO_FAN)
|
||||
REPORT_NAME_DIGITAL(__LINE__, CHAMBER_AUTO_FAN_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(CONTROLLER_FAN)
|
||||
REPORT_NAME_DIGITAL(__LINE__, CONTROLLER_FAN_PIN)
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -107,6 +107,7 @@
|
|||
|
||||
// optional for extruder 4 or chamber:
|
||||
//#define TEMP_X_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used)
|
||||
//#define TEMP_CHAMBER_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used)
|
||||
|
||||
#if TEMP_SENSOR_BED == -1
|
||||
#define TEMP_BED_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_2 is defined as thermocouple)
|
||||
|
|
|
|||
Reference in a new issue