Spacing adjustments

This commit is contained in:
Scott Lahteine 2017-10-01 21:33:52 -05:00
parent ac41eb5871
commit 965b0ab53e
7 changed files with 34 additions and 39 deletions

View file

@ -1,7 +1,7 @@
#include <stdint.h>
#if !defined(SPI_FULL_SPEED)
#ifndef SPI_FULL_SPEED
/**
* SPI speed where 0 <= index <= 6

View file

@ -632,7 +632,7 @@ static_assert(1 >= 0
/**
* Make sure Z raise values are set
*/
#if !defined(Z_CLEARANCE_DEPLOY_PROBE)
#ifndef Z_CLEARANCE_DEPLOY_PROBE
#error "You must define Z_CLEARANCE_DEPLOY_PROBE in your configuration."
#elif !defined(Z_CLEARANCE_BETWEEN_PROBES)
#error "You must define Z_CLEARANCE_BETWEEN_PROBES in your configuration."

View file

@ -276,7 +276,7 @@ inline void do_probe_raise(const float z_raise) {
#endif
}
#endif
#endif // Z_PROBE_ALLEN_KEY
#if ENABLED(PROBING_FANS_OFF)

View file

@ -323,7 +323,7 @@ void Stepper::isr() {
HAL_TIMER_TYPE ocr_val;
#if defined(CPU_32_BIT)
#ifdef CPU_32_BIT
#define ENDSTOP_NOMINAL_OCR_VAL 1500 * HAL_TICKS_PER_US // check endstops every 1.5ms to guarantee two stepper ISRs within 5ms for BLTouch
#define OCR_VAL_TOLERANCE 500 * HAL_TICKS_PER_US // First max delay is 2.0ms, last min delay is 0.5ms, all others 1.5ms
#else
@ -335,7 +335,7 @@ void Stepper::isr() {
// Disable Timer0 ISRs and enable global ISR again to capture UART events (incoming chars)
DISABLE_TEMPERATURE_INTERRUPT(); // Temperature ISR
DISABLE_STEPPER_DRIVER_INTERRUPT();
#if !defined(CPU_32_BIT)
#ifndef CPU_32_BIT
sei();
#endif
#endif

View file

@ -88,7 +88,7 @@
* Many thanks to Hans Raaf (@oderwat) for developing the Anet-specific software and supporting the Anet community.
*/
#if !defined(__AVR_ATmega1284P__)
#ifndef __AVR_ATmega1284P__
#error "Oops! Make sure you have 'Anet V1.0', 'Anet V1.0 (Optiboot)' or 'Sanguino' selected from the 'Tools -> Boards' menu."
#endif

View file

@ -66,7 +66,7 @@
#define Y_MAX_PIN 15 //10k pullup to 3.3V, 1K series
#define Z_MIN_PIN 18 //10k pullup to 3.3V, 1K series
#define Z_MAX_PIN 19 //10k pullup to 3.3V, 1K series
//#define Z_probe_pin 1 // AUX-1
//#define Z_PROBE_PIN 1 // AUX-1
//
@ -267,23 +267,18 @@
//#define SHIFT_EN 41 // J5-4 & AUX-4
#endif
#if ENABLED(SDSUPPORT)
#define SDCARD_SORT_ALPHA // Using SORT feature to keep one directory level in RAM
// When going up/down directory levels the SD card is
// accessed but the garbage/lines are removed when the
// LCD updates
// SD Card Sorting options
#if ENABLED(SDCARD_SORT_ALPHA)
#define SDSORT_LIMIT 255 // Maximum number of sorted items (10-256). Costs 27 bytes each.
#define SDSORT_LIMIT 256 // Maximum number of sorted items (10-256). Costs 27 bytes each.
#define FOLDER_SORTING -1 // -1=above 0=none 1=below
#define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code.
#define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting.
#define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
#define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option.
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
#endif
#endif
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
// #define LCD_SCREEN_ROT_180

View file

@ -145,10 +145,10 @@ typedef int32_t(*PFI)();
/* External data/function define */
#define EXTERN extern
#if !defined(MAX)
#ifndef MAX
#define MAX(a, b) (((a) > (b)) ? (a) : (b))
#endif
#if !defined(MIN)
#ifndef MIN
#define MIN(a, b) (((a) < (b)) ? (a) : (b))
#endif