Update language.h

Added catalan language
This commit is contained in:
pixatintes 2014-03-23 10:30:08 +01:00
parent 51c6bd6b72
commit 990e770e15

View file

@ -18,6 +18,7 @@
// 9 Finnish
// 10 Aragonese
// 11 Dutch
// 12 Catalan
#ifndef LANGUAGE_CHOICE
#define LANGUAGE_CHOICE 1 // Pick your language from the list above
@ -2252,4 +2253,195 @@
#endif
#if LANGUAGE_CHOICE == 12
// LCD Menu Messages
// Please note these are limited to 17 characters!
#define WELCOME_MSG MACHINE_NAME " a punt!"
#define MSG_SD_INSERTED "SD detectada."
#define MSG_SD_REMOVED "SD expulsada."
#define MSG_MAIN "Menu principal"
#define MSG_AUTOSTART "Inici automatic"
#define MSG_DISABLE_STEPPERS " Apagar motors"
#define MSG_AUTO_HOME " Home global"
#define MSG_SET_ORIGIN "Establir origen"
#define MSG_PREHEAT_PLA " Preescalfar PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Config. temp. PLA"
#define MSG_PREHEAT_ABS " Preescalfar ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Config. temp. ABS"
#define MSG_COOLDOWN " Refredar"
#define MSG_SWITCH_PS_ON " Switch Power On"
#define MSG_SWITCH_PS_OFF " Switch Power Off"
#define MSG_EXTRUDE "Extruir"
#define MSG_RETRACT "Retreure"
#define MSG_MOVE_AXIS " Moure eixos"
#define MSG_MOVE_X " Moure X"
#define MSG_MOVE_Y " Moure Y"
#define MSG_MOVE_Z " Moure Z"
#define MSG_MOVE_E "Extrusor"
#define MSG_MOVE_01MM " Moure 0.1mm"
#define MSG_MOVE_1MM " Moure 1mm"
#define MSG_MOVE_10MM " Moure 10mm"
#define MSG_SPEED "Velocitat"
#define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Llit"
#define MSG_FAN_SPEED "Vel. Ventilador"
#define MSG_FLOW "Fluxe"
#define MSG_CONTROL " Control"
#define MSG_MIN "\002 Min"
#define MSG_MAX "\002 Max"
#define MSG_FACTOR "\002 Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On"
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Acel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax"
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax"
#define MSG_A_RETRACT "A-retrac."
#define MSG_XSTEPS "X passos/mm"
#define MSG_YSTEPS "Y passos/mm"
#define MSG_ZSTEPS "Z passos/mm"
#define MSG_ESTEPS "E passos/mm"
#define MSG_RECTRACT "Retreure"
#define MSG_TEMPERATURE " Temperatura"
#define MSG_MOTION " Moviment"
#define MSG_STORE_EPROM "Desar memoria"
#define MSG_LOAD_EPROM "Llegir memoria"
#define MSG_RESTORE_FAILSAFE " Rest. emergencia"
#define MSG_REFRESH "Tornar a carregar"
#define MSG_WATCH "Pantalla Info."
#define MSG_PREPARE " Preparar"
#define MSG_TUNE " Ajustar"
#define MSG_PAUSE_PRINT " Pausa Imp."
#define MSG_RESUME_PRINT " Reprendre Imp."
#define MSG_STOP_PRINT " Aturar Imp."
#define MSG_CARD_MENU " Explorar SD"
#define MSG_NO_CARD " -Sense SD"
#define MSG_DWELL "Repos..."
#define MSG_USERWAIT "Esperant ordres"
#define MSG_RESUMING "Reprendre Imp."
#define MSG_NO_MOVE "Sense moviment"
#define MSG_KILLED "PARADA DE EMERG."
#define MSG_STOPPED "PARADA"
#define MSG_CONTROL_RETRACT "Retreure mm"
#define MSG_CONTROL_RETRACTF "Retreure F"
#define MSG_CONTROL_RETRACT_ZLIFT "Aixecar mm"
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Canviar filament"
#define MSG_INIT_SDCARD "Iniciant SD"
#define MSG_CNG_SDCARD "Canviar SD"
#define MSG_RECTRACT_WIDE " Retreure "
#define MSG_TEMPERATURE_WIDE "Temperatura"
#define MSG_TEMPERATURE_RTN "Temperatura"
#define MSG_MAIN_WIDE "Menu principal"
#define MSG_MOTION_WIDE "Moviment"
#define MSG_PREPARE_ALT "Preparar"
#define MSG_CONTROL_ARROW "Control"
#define MSG_RETRACT_ARROW "Retreure"
#define MSG_STEPPER_RELEASED "Desacoblada."
#define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_CONTRAST "Contrast"
// Serial Console Messages
#define MSG_Enqueing "en cua \""
#define MSG_POWERUP "PowerUp"
#define MSG_EXTERNAL_RESET " Reset Extern"
#define MSG_BROWNOUT_RESET " Reset per Voltatge Incorrecte"
#define MSG_WATCHDOG_RESET " Reset per Bloqueig"
#define MSG_SOFTWARE_RESET " Reset per Software"
#define MSG_AUTHOR " | Autor: "
#define MSG_CONFIGURATION_VER " Ultima actualitzacio: "
#define MSG_FREE_MEMORY " Memoria lliure: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "Ok"
#define MSG_FILE_SAVED "Desat."
#define MSG_ERR_LINE_NO "El Numero de la Linia no es igual al Ultimo Numero de Linia+1, Ultima Linia:"
#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincideix, Ultima Linia:"
#define MSG_ERR_NO_CHECKSUM "No s'ha trobat el Checksum amb el numero de linia, Ultima Linia:"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No s'ha trobat Numero de Linia amb el Checksum, Ultima Linia:"
#define MSG_FILE_PRINTED "Treball acabat!"
#define MSG_BEGIN_FILE_LIST "Inici de la llista d'arxius"
#define MSG_END_FILE_LIST "Fi de la llista d'arxius"
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalid "
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalid "
#define MSG_M200_INVALID_EXTRUDER "M200 Extrusor Invalid "
#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalid "
#define MSG_ERR_NO_THERMISTORS "No hi ha termistors - no temp"
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalid "
#define MSG_HEATING "Escalfant Nozzle..."
#define MSG_HEATING_COMPLETE "Nozzle calent."
#define MSG_BED_HEATING "Escalfant llit..."
#define MSG_BED_DONE "Llit calent."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
#define MSG_COUNT_X " Compta X:"
#define MSG_ERR_KILLED "¡¡Impressora Parada per kill()!!"
#define MSG_ERR_STOPPED "¡Impressora parada per errors. Repara l'error i utilitza M999 per reiniciar!. (Hi ha un reset de temperatura, cal ajustar-la abans de continuar)"
#define MSG_RESEND "Reenviar:"
#define MSG_UNKNOWN_COMMAND "Comanda Desconeguda:\""
#define MSG_ACTIVE_EXTRUDER "Extrusor Actiu: "
#define MSG_INVALID_EXTRUDER "Extrusor Invalid"
#define MSG_X_MIN "x_min: "
#define MSG_X_MAX "x_max: "
#define MSG_Y_MIN "y_min: "
#define MSG_Y_MAX "y_max: "
#define MSG_Z_MIN "z_min: "
#define MSG_Z_MAX "z_max: "
#define MSG_M119_REPORT "Comprovant finals de carrera."
#define MSG_ENDSTOP_HIT "Activat!"
#define MSG_ENDSTOP_OPEN "obert"
#define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_CANT_OPEN_SUBDIR "No s'ha pogut obrir la subcarpeta."
#define MSG_SD_INIT_FAIL "Error en iniciar la SD"
#define MSG_SD_VOL_INIT_FAIL "Error al muntar el volum"
#define MSG_SD_OPENROOT_FAIL "Error en obrir la carpeta arrel"
#define MSG_SD_CARD_OK "Tarjeta SD OK"
#define MSG_SD_WORKDIR_FAIL "Error en obrir la carpeta de treball"
#define MSG_SD_OPEN_FILE_FAIL "Error en obrir, Fitxer: "
#define MSG_SD_FILE_OPENED "Fitxer obert:"
#define MSG_SD_SIZE " Mida:"
#define MSG_SD_FILE_SELECTED "Fitxer Seleccionat"
#define MSG_SD_WRITE_TO_FILE "Desant al fitxer: "
#define MSG_SD_PRINTING_BYTE "SD imprimint el byte "
#define MSG_SD_NOT_PRINTING "No s'esta imprimint amb SD"
#define MSG_SD_ERR_WRITE_TO_FILE "Error al escriure al fitxer"
#define MSG_SD_CANT_ENTER_SUBDIR "No es pot obrir la carpeta:"
#define MSG_STEPPER_TOO_HIGH "Steprate massa alt : "
#define MSG_ENDSTOPS_HIT "S'ha tocat el final de carrera: "
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusio freda evitada"
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusio massa llarga evitada"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Babystepping Z"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error a l'estructura dels menus"
#endif
#endif // ifndef LANGUAGE_H