Fix Pause Print message and behavior (#13394)

This commit is contained in:
Scott Lahteine 2019-03-14 02:26:07 -05:00 committed by GitHub
parent f5bcc00570
commit 9a515cbd32
Signed by: GitHub
GPG key ID: 4AEE18F83AFDEB23
18 changed files with 174 additions and 154 deletions

View file

@ -66,10 +66,10 @@ void FWRetract::reset() {
settings.retract_length = RETRACT_LENGTH; settings.retract_length = RETRACT_LENGTH;
settings.retract_feedrate_mm_s = RETRACT_FEEDRATE; settings.retract_feedrate_mm_s = RETRACT_FEEDRATE;
settings.retract_zraise = RETRACT_ZRAISE; settings.retract_zraise = RETRACT_ZRAISE;
settings.retract_recover_length = RETRACT_RECOVER_LENGTH; settings.retract_recover_extra = RETRACT_RECOVER_LENGTH;
settings.retract_recover_feedrate_mm_s = RETRACT_RECOVER_FEEDRATE; settings.retract_recover_feedrate_mm_s = RETRACT_RECOVER_FEEDRATE;
settings.swap_retract_length = RETRACT_LENGTH_SWAP; settings.swap_retract_length = RETRACT_LENGTH_SWAP;
settings.swap_retract_recover_length = RETRACT_RECOVER_LENGTH_SWAP; settings.swap_retract_recover_extra = RETRACT_RECOVER_LENGTH_SWAP;
settings.swap_retract_recover_feedrate_mm_s = RETRACT_RECOVER_FEEDRATE_SWAP; settings.swap_retract_recover_feedrate_mm_s = RETRACT_RECOVER_FEEDRATE_SWAP;
current_hop = 0.0; current_hop = 0.0;
@ -175,7 +175,7 @@ void FWRetract::retract(const bool retracting
planner.synchronize(); // Wait for move to complete planner.synchronize(); // Wait for move to complete
} }
const float extra_recover = swapping ? settings.swap_retract_recover_length : settings.retract_recover_length; const float extra_recover = swapping ? settings.swap_retract_recover_extra : settings.retract_recover_extra;
if (extra_recover != 0.0) { if (extra_recover != 0.0) {
current_position[E_AXIS] -= extra_recover; // Adjust the current E position by the extra amount to recover current_position[E_AXIS] -= extra_recover; // Adjust the current E position by the extra amount to recover
sync_plan_position_e(); // Sync the planner position so the extra amount is recovered sync_plan_position_e(); // Sync the planner position so the extra amount is recovered

View file

@ -33,10 +33,10 @@ typedef struct {
float retract_length, // M207 S - G10 Retract length float retract_length, // M207 S - G10 Retract length
retract_feedrate_mm_s, // M207 F - G10 Retract feedrate retract_feedrate_mm_s, // M207 F - G10 Retract feedrate
retract_zraise, // M207 Z - G10 Retract hop size retract_zraise, // M207 Z - G10 Retract hop size
retract_recover_length, // M208 S - G11 Recover length retract_recover_extra, // M208 S - G11 Recover length
retract_recover_feedrate_mm_s, // M208 F - G11 Recover feedrate retract_recover_feedrate_mm_s, // M208 F - G11 Recover feedrate
swap_retract_length, // M207 W - G10 Swap Retract length swap_retract_length, // M207 W - G10 Swap Retract length
swap_retract_recover_length, // M208 W - G11 Swap Recover length swap_retract_recover_extra, // M208 W - G11 Swap Recover length
swap_retract_recover_feedrate_mm_s; // M208 R - G11 Swap Recover feedrate swap_retract_recover_feedrate_mm_s; // M208 R - G11 Swap Recover feedrate
} fwretract_settings_t; } fwretract_settings_t;

View file

@ -110,7 +110,7 @@ void host_action(const char * const pstr, const bool eol) {
case PROMPT_FILAMENT_RUNOUT: case PROMPT_FILAMENT_RUNOUT:
msg = PSTR("FILAMENT_RUNOUT"); msg = PSTR("FILAMENT_RUNOUT");
if (response == 0) { if (response == 0) {
advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE; pause_menu_response = PAUSE_RESPONSE_EXTRUDE_MORE;
host_action_prompt_end(); // Close current prompt host_action_prompt_end(); // Close current prompt
host_action_prompt_begin(PSTR("Paused")); host_action_prompt_begin(PSTR("Paused"));
host_action_prompt_button(PSTR("Purge More")); host_action_prompt_button(PSTR("Purge More"));
@ -133,7 +133,7 @@ void host_action(const char * const pstr, const bool eol) {
runout.reset(); runout.reset();
} }
#endif #endif
advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_RESUME_PRINT; pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT;
} }
break; break;
case PROMPT_USER_CONTINUE: case PROMPT_USER_CONTINUE:

View file

@ -58,7 +58,9 @@
static float resume_position[XYZE]; static float resume_position[XYZE];
AdvancedPauseMenuResponse advanced_pause_menu_response; PauseMode pause_mode = PAUSE_MODE_PAUSE_PRINT;
PauseMenuResponse pause_menu_response;
fil_change_settings_t fc_settings[EXTRUDERS]; fil_change_settings_t fc_settings[EXTRUDERS];
@ -68,6 +70,7 @@ fil_change_settings_t fc_settings[EXTRUDERS];
#if HAS_BUZZER #if HAS_BUZZER
static void filament_change_beep(const int8_t max_beep_count, const bool init=false) { static void filament_change_beep(const int8_t max_beep_count, const bool init=false) {
if (pause_mode == PAUSE_MODE_PAUSE_PRINT) return;
static millis_t next_buzz = 0; static millis_t next_buzz = 0;
static int8_t runout_beep = 0; static int8_t runout_beep = 0;
@ -93,7 +96,7 @@ fil_change_settings_t fc_settings[EXTRUDERS];
* *
* Returns 'true' if heating was completed, 'false' for abort * Returns 'true' if heating was completed, 'false' for abort
*/ */
static bool ensure_safe_temperature(const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_SAME) { static bool ensure_safe_temperature(const PauseMode mode=PAUSE_MODE_SAME) {
#if ENABLED(PREVENT_COLD_EXTRUSION) #if ENABLED(PREVENT_COLD_EXTRUSION)
if (!DEBUGGING(DRYRUN) && thermalManager.targetTooColdToExtrude(active_extruder)) { if (!DEBUGGING(DRYRUN) && thermalManager.targetTooColdToExtrude(active_extruder)) {
@ -103,7 +106,7 @@ static bool ensure_safe_temperature(const AdvancedPauseMode mode=ADVANCED_PAUSE_
#endif #endif
#if HAS_LCD_MENU #if HAS_LCD_MENU
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_HEATING, mode); lcd_pause_show_message(PAUSE_MESSAGE_HEATING, mode);
#else #else
UNUSED(mode); UNUSED(mode);
#endif #endif
@ -134,7 +137,7 @@ void do_pause_e_move(const float &length, const float &fr_mm_s) {
*/ */
bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_length/*=0*/, const float &purge_length/*=0*/, const int8_t max_beep_count/*=0*/, bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_length/*=0*/, const float &purge_length/*=0*/, const int8_t max_beep_count/*=0*/,
const bool show_lcd/*=false*/, const bool pause_for_user/*=false*/, const bool show_lcd/*=false*/, const bool pause_for_user/*=false*/,
const AdvancedPauseMode mode/*=ADVANCED_PAUSE_MODE_PAUSE_PRINT*/ const PauseMode mode/*=PAUSE_MODE_PAUSE_PRINT*/
DXC_ARGS DXC_ARGS
) { ) {
#if !HAS_LCD_MENU #if !HAS_LCD_MENU
@ -143,14 +146,14 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
if (!ensure_safe_temperature(mode)) { if (!ensure_safe_temperature(mode)) {
#if HAS_LCD_MENU #if HAS_LCD_MENU
if (show_lcd) lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS, mode); if (show_lcd) lcd_pause_show_message(PAUSE_MESSAGE_STATUS, mode);
#endif #endif
return false; return false;
} }
if (pause_for_user) { if (pause_for_user) {
#if HAS_LCD_MENU #if HAS_LCD_MENU
if (show_lcd) lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INSERT, mode); if (show_lcd) lcd_pause_show_message(PAUSE_MESSAGE_INSERT, mode);
#endif #endif
SERIAL_ECHO_MSG(MSG_FILAMENT_CHANGE_INSERT); SERIAL_ECHO_MSG(MSG_FILAMENT_CHANGE_INSERT);
@ -186,7 +189,7 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
} }
#if HAS_LCD_MENU #if HAS_LCD_MENU
if (show_lcd) lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_LOAD, mode); if (show_lcd) lcd_pause_show_message(PAUSE_MESSAGE_LOAD, mode);
#endif #endif
#if ENABLED(DUAL_X_CARRIAGE) #if ENABLED(DUAL_X_CARRIAGE)
@ -222,7 +225,7 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
#if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE) #if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE)
#if HAS_LCD_MENU #if HAS_LCD_MENU
if (show_lcd) lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_PURGE); if (show_lcd) lcd_pause_show_message(PAUSE_MESSAGE_PURGE);
#endif #endif
wait_for_user = true; wait_for_user = true;
@ -239,7 +242,7 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
if (purge_length > 0) { if (purge_length > 0) {
// "Wait for filament purge" // "Wait for filament purge"
#if HAS_LCD_MENU #if HAS_LCD_MENU
if (show_lcd) lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_PURGE); if (show_lcd) lcd_pause_show_message(PAUSE_MESSAGE_PURGE);
#endif #endif
// Extrude filament to get into hotend // Extrude filament to get into hotend
@ -269,8 +272,8 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
if (show_lcd) { if (show_lcd) {
KEEPALIVE_STATE(PAUSED_FOR_USER); KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = false; wait_for_user = false;
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_OPTION); lcd_pause_show_message(PAUSE_MESSAGE_OPTION);
while (advanced_pause_menu_response == ADVANCED_PAUSE_RESPONSE_WAIT_FOR) idle(true); while (pause_menu_response == PAUSE_RESPONSE_WAIT_FOR) idle(true);
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
} }
#endif #endif
@ -278,7 +281,7 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
// Keep looping if "Purge More" was selected // Keep looping if "Purge More" was selected
} while (false } while (false
#if HAS_LCD_MENU #if HAS_LCD_MENU
|| (show_lcd && advanced_pause_menu_response == ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE) || (show_lcd && pause_menu_response == PAUSE_RESPONSE_EXTRUDE_MORE)
#endif #endif
); );
@ -298,7 +301,7 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
* Returns 'true' if unload was completed, 'false' for abort * Returns 'true' if unload was completed, 'false' for abort
*/ */
bool unload_filament(const float &unload_length, const bool show_lcd/*=false*/, bool unload_filament(const float &unload_length, const bool show_lcd/*=false*/,
const AdvancedPauseMode mode/*=ADVANCED_PAUSE_MODE_PAUSE_PRINT*/ const PauseMode mode/*=PAUSE_MODE_PAUSE_PRINT*/
) { ) {
#if !HAS_LCD_MENU #if !HAS_LCD_MENU
UNUSED(show_lcd); UNUSED(show_lcd);
@ -306,14 +309,14 @@ bool unload_filament(const float &unload_length, const bool show_lcd/*=false*/,
if (!ensure_safe_temperature(mode)) { if (!ensure_safe_temperature(mode)) {
#if HAS_LCD_MENU #if HAS_LCD_MENU
if (show_lcd) lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS); if (show_lcd) lcd_pause_show_message(PAUSE_MESSAGE_STATUS);
#endif #endif
return false; return false;
} }
#if HAS_LCD_MENU #if HAS_LCD_MENU
if (show_lcd) lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_UNLOAD, mode); if (show_lcd) lcd_pause_show_message(PAUSE_MESSAGE_UNLOAD, mode);
#endif #endif
// Retract filament // Retract filament
@ -387,7 +390,7 @@ bool pause_print(const float &retract, const point_t &park_point, const float &u
#if HAS_LCD_MENU #if HAS_LCD_MENU
if (show_lcd) { // Show status screen if (show_lcd) { // Show status screen
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS); lcd_pause_show_message(PAUSE_MESSAGE_STATUS);
LCD_MESSAGEPGM(MSG_M600_TOO_COLD); LCD_MESSAGEPGM(MSG_M600_TOO_COLD);
} }
#endif #endif
@ -464,7 +467,7 @@ bool pause_print(const float &retract, const point_t &park_point, const float &u
void show_continue_prompt(const bool is_reload) { void show_continue_prompt(const bool is_reload) {
#if HAS_LCD_MENU #if HAS_LCD_MENU
lcd_advanced_pause_show_message(is_reload ? ADVANCED_PAUSE_MESSAGE_INSERT : ADVANCED_PAUSE_MESSAGE_WAITING); lcd_pause_show_message(is_reload ? PAUSE_MESSAGE_INSERT : PAUSE_MESSAGE_WAITING);
#endif #endif
SERIAL_ECHO_START(); SERIAL_ECHO_START();
serialprintPGM(is_reload ? PSTR(_PMSG(MSG_FILAMENT_CHANGE_INSERT) "\n") : PSTR(_PMSG(MSG_FILAMENT_CHANGE_WAIT) "\n")); serialprintPGM(is_reload ? PSTR(_PMSG(MSG_FILAMENT_CHANGE_INSERT) "\n") : PSTR(_PMSG(MSG_FILAMENT_CHANGE_WAIT) "\n"));
@ -510,7 +513,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
// re-heat the nozzle, re-show the continue prompt, restart idle timers, start over // re-heat the nozzle, re-show the continue prompt, restart idle timers, start over
if (nozzle_timed_out) { if (nozzle_timed_out) {
#if HAS_LCD_MENU #if HAS_LCD_MENU
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_HEAT); lcd_pause_show_message(PAUSE_MESSAGE_HEAT);
#endif #endif
SERIAL_ECHO_MSG(_PMSG(MSG_FILAMENT_CHANGE_HEAT)); SERIAL_ECHO_MSG(_PMSG(MSG_FILAMENT_CHANGE_HEAT));
@ -597,10 +600,10 @@ void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_le
} }
if (nozzle_timed_out || thermalManager.hotEnoughToExtrude(active_extruder)) // Load the new filament if (nozzle_timed_out || thermalManager.hotEnoughToExtrude(active_extruder)) // Load the new filament
load_filament(slow_load_length, fast_load_length, purge_length, max_beep_count, true, nozzle_timed_out, ADVANCED_PAUSE_MODE_PAUSE_PRINT DXC_PASS); load_filament(slow_load_length, fast_load_length, purge_length, max_beep_count, true, nozzle_timed_out, PAUSE_MODE_PAUSE_PRINT DXC_PASS);
#if HAS_LCD_MENU #if HAS_LCD_MENU
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_RESUME); lcd_pause_show_message(PAUSE_MESSAGE_RESUME);
#endif #endif
// Intelligent resuming // Intelligent resuming
@ -628,7 +631,7 @@ void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_le
planner.set_e_position_mm((destination[E_AXIS] = current_position[E_AXIS] = resume_position[E_AXIS])); planner.set_e_position_mm((destination[E_AXIS] = current_position[E_AXIS] = resume_position[E_AXIS]));
#if HAS_LCD_MENU #if HAS_LCD_MENU
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS); lcd_pause_show_message(PAUSE_MESSAGE_STATUS);
#endif #endif
#ifdef ACTION_ON_RESUMED #ifdef ACTION_ON_RESUMED

View file

@ -36,34 +36,36 @@ typedef struct {
#include "../libs/nozzle.h" #include "../libs/nozzle.h"
enum AdvancedPauseMode : char { enum PauseMode : char {
ADVANCED_PAUSE_MODE_SAME, PAUSE_MODE_SAME,
ADVANCED_PAUSE_MODE_PAUSE_PRINT, PAUSE_MODE_PAUSE_PRINT,
ADVANCED_PAUSE_MODE_LOAD_FILAMENT, PAUSE_MODE_LOAD_FILAMENT,
ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT PAUSE_MODE_UNLOAD_FILAMENT
}; };
enum AdvancedPauseMessage : char { enum PauseMessage : char {
ADVANCED_PAUSE_MESSAGE_INIT, PAUSE_MESSAGE_PAUSING,
ADVANCED_PAUSE_MESSAGE_WAITING, PAUSE_MESSAGE_CHANGING,
ADVANCED_PAUSE_MESSAGE_UNLOAD, PAUSE_MESSAGE_WAITING,
ADVANCED_PAUSE_MESSAGE_INSERT, PAUSE_MESSAGE_UNLOAD,
ADVANCED_PAUSE_MESSAGE_LOAD, PAUSE_MESSAGE_INSERT,
ADVANCED_PAUSE_MESSAGE_PURGE, PAUSE_MESSAGE_LOAD,
ADVANCED_PAUSE_MESSAGE_OPTION, PAUSE_MESSAGE_PURGE,
ADVANCED_PAUSE_MESSAGE_RESUME, PAUSE_MESSAGE_OPTION,
ADVANCED_PAUSE_MESSAGE_STATUS, PAUSE_MESSAGE_RESUME,
ADVANCED_PAUSE_MESSAGE_HEAT, PAUSE_MESSAGE_STATUS,
ADVANCED_PAUSE_MESSAGE_HEATING PAUSE_MESSAGE_HEAT,
PAUSE_MESSAGE_HEATING
}; };
enum AdvancedPauseMenuResponse : char { enum PauseMenuResponse : char {
ADVANCED_PAUSE_RESPONSE_WAIT_FOR, PAUSE_RESPONSE_WAIT_FOR,
ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE, PAUSE_RESPONSE_EXTRUDE_MORE,
ADVANCED_PAUSE_RESPONSE_RESUME_PRINT PAUSE_RESPONSE_RESUME_PRINT
}; };
extern AdvancedPauseMenuResponse advanced_pause_menu_response; extern PauseMode pause_mode;
extern PauseMenuResponse pause_menu_response;
extern fil_change_settings_t fc_settings[EXTRUDERS]; extern fil_change_settings_t fc_settings[EXTRUDERS];
@ -88,8 +90,8 @@ void wait_for_confirmation(const bool is_reload=false, const int8_t max_beep_cou
void resume_print(const float &slow_load_length=0, const float &fast_load_length=0, const float &extrude_length=ADVANCED_PAUSE_PURGE_LENGTH, const int8_t max_beep_count=0 DXC_PARAMS); void resume_print(const float &slow_load_length=0, const float &fast_load_length=0, const float &extrude_length=ADVANCED_PAUSE_PURGE_LENGTH, const int8_t max_beep_count=0 DXC_PARAMS);
bool load_filament(const float &slow_load_length=0, const float &fast_load_length=0, const float &extrude_length=0, const int8_t max_beep_count=0, const bool show_lcd=false, bool load_filament(const float &slow_load_length=0, const float &fast_load_length=0, const float &extrude_length=0, const int8_t max_beep_count=0, const bool show_lcd=false,
const bool pause_for_user=false, const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT DXC_PARAMS); const bool pause_for_user=false, const PauseMode mode=PAUSE_MODE_PAUSE_PRINT DXC_PARAMS);
bool unload_filament(const float &unload_length, const bool show_lcd=false, const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT); bool unload_filament(const float &unload_length, const bool show_lcd=false, const PauseMode mode=PAUSE_MODE_PAUSE_PRINT);
#endif // ADVANCED_PAUSE_FEATURE #endif // ADVANCED_PAUSE_FEATURE

View file

@ -45,16 +45,16 @@ void GcodeSuite::M207() {
/** /**
* M208: Set firmware un-retraction values * M208: Set firmware un-retraction values
* *
* S[+units] retract_recover_length (in addition to M207 S*) * S[+units] retract_recover_extra (in addition to M207 S*)
* W[+units] swap_retract_recover_length (multi-extruder) * W[+units] swap_retract_recover_extra (multi-extruder)
* F[units/min] retract_recover_feedrate_mm_s * F[units/min] retract_recover_feedrate_mm_s
* R[units/min] swap_retract_recover_feedrate_mm_s * R[units/min] swap_retract_recover_feedrate_mm_s
*/ */
void GcodeSuite::M208() { void GcodeSuite::M208() {
if (parser.seen('S')) fwretract.settings.retract_recover_length = parser.value_axis_units(E_AXIS); if (parser.seen('S')) fwretract.settings.retract_recover_extra = parser.value_axis_units(E_AXIS);
if (parser.seen('F')) fwretract.settings.retract_recover_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS)); if (parser.seen('F')) fwretract.settings.retract_recover_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS));
if (parser.seen('R')) fwretract.settings.swap_retract_recover_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS)); if (parser.seen('R')) fwretract.settings.swap_retract_recover_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS));
if (parser.seen('W')) fwretract.settings.swap_retract_recover_length = parser.value_axis_units(E_AXIS); if (parser.seen('W')) fwretract.settings.swap_retract_recover_extra = parser.value_axis_units(E_AXIS);
} }
#if ENABLED(FWRETRACT_AUTORETRACT) #if ENABLED(FWRETRACT_AUTORETRACT)

View file

@ -36,7 +36,7 @@
#endif #endif
/** /**
* M125: Store current position and move to filament change position. * M125: Store current position and move to parking position.
* Called on pause (by M25) to prevent material leaking onto the * Called on pause (by M25) to prevent material leaking onto the
* object. On resume (M24) the head will be moved back and the * object. On resume (M24) the head will be moved back and the
* print will resume. * print will resume.
@ -79,14 +79,14 @@ void GcodeSuite::M125() {
#endif #endif
#if HAS_LCD_MENU #if HAS_LCD_MENU
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT, ADVANCED_PAUSE_MODE_PAUSE_PRINT); lcd_pause_show_message(PAUSE_MESSAGE_PAUSING, PAUSE_MODE_PAUSE_PRINT);
const bool show_lcd = parser.seenval('P'); const bool show_lcd = parser.seenval('P');
#else #else
constexpr bool show_lcd = false; constexpr bool show_lcd = false;
#endif #endif
if (pause_print(retract, park_point, 0, show_lcd)) { if (pause_print(retract, park_point, 0, show_lcd)) {
if (!sd_printing || show_lcd ) { if (!sd_printing || show_lcd) {
wait_for_confirmation(false, 0); wait_for_confirmation(false, 0);
resume_print(0, 0, PAUSE_PARK_RETRACT_LENGTH, 0); resume_print(0, 0, PAUSE_PARK_RETRACT_LENGTH, 0);
} }

View file

@ -76,7 +76,7 @@ void GcodeSuite::M600() {
// Show initial "wait for start" message // Show initial "wait for start" message
#if HAS_LCD_MENU && DISABLED(MMU2_MENUS) #if HAS_LCD_MENU && DISABLED(MMU2_MENUS)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT, ADVANCED_PAUSE_MODE_PAUSE_PRINT, target_extruder); lcd_pause_show_message(PAUSE_MESSAGE_CHANGING, PAUSE_MODE_PAUSE_PRINT, target_extruder);
#endif #endif
#if ENABLED(HOME_BEFORE_FILAMENT_CHANGE) #if ENABLED(HOME_BEFORE_FILAMENT_CHANGE)

View file

@ -68,7 +68,7 @@ void GcodeSuite::M701() {
// Show initial "wait for load" message // Show initial "wait for load" message
#if HAS_LCD_MENU #if HAS_LCD_MENU
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_LOAD, ADVANCED_PAUSE_MODE_LOAD_FILAMENT, target_extruder); lcd_pause_show_message(PAUSE_MESSAGE_LOAD, PAUSE_MODE_LOAD_FILAMENT, target_extruder);
#endif #endif
#if EXTRUDERS > 1 && DISABLED(PRUSA_MMU2) #if EXTRUDERS > 1 && DISABLED(PRUSA_MMU2)
@ -90,7 +90,7 @@ void GcodeSuite::M701() {
const float fast_load_length = ABS(parser.seen('L') ? parser.value_axis_units(E_AXIS) const float fast_load_length = ABS(parser.seen('L') ? parser.value_axis_units(E_AXIS)
: fc_settings[active_extruder].load_length); : fc_settings[active_extruder].load_length);
load_filament(slow_load_length, fast_load_length, ADVANCED_PAUSE_PURGE_LENGTH, FILAMENT_CHANGE_ALERT_BEEPS, load_filament(slow_load_length, fast_load_length, ADVANCED_PAUSE_PURGE_LENGTH, FILAMENT_CHANGE_ALERT_BEEPS,
true, thermalManager.still_heating(target_extruder), ADVANCED_PAUSE_MODE_LOAD_FILAMENT true, thermalManager.still_heating(target_extruder), PAUSE_MODE_LOAD_FILAMENT
#if ENABLED(DUAL_X_CARRIAGE) #if ENABLED(DUAL_X_CARRIAGE)
, target_extruder , target_extruder
#endif #endif
@ -109,7 +109,7 @@ void GcodeSuite::M701() {
// Show status screen // Show status screen
#if HAS_LCD_MENU #if HAS_LCD_MENU
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS); lcd_pause_show_message(PAUSE_MESSAGE_STATUS);
#endif #endif
} }
@ -139,7 +139,7 @@ void GcodeSuite::M702() {
// Show initial "wait for unload" message // Show initial "wait for unload" message
#if HAS_LCD_MENU #if HAS_LCD_MENU
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_UNLOAD, ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, target_extruder); lcd_pause_show_message(PAUSE_MESSAGE_UNLOAD, PAUSE_MODE_UNLOAD_FILAMENT, target_extruder);
#endif #endif
#if EXTRUDERS > 1 && DISABLED(PRUSA_MMU2) #if EXTRUDERS > 1 && DISABLED(PRUSA_MMU2)
@ -161,7 +161,7 @@ void GcodeSuite::M702() {
if (!parser.seenval('T')) { if (!parser.seenval('T')) {
HOTEND_LOOP() { HOTEND_LOOP() {
if (e != active_extruder) tool_change(e, 0, false); if (e != active_extruder) tool_change(e, 0, false);
unload_filament(-fc_settings[e].unload_length, true, ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT); unload_filament(-fc_settings[e].unload_length, true, PAUSE_MODE_UNLOAD_FILAMENT);
} }
} }
else else
@ -171,7 +171,7 @@ void GcodeSuite::M702() {
const float unload_length = -ABS(parser.seen('U') ? parser.value_axis_units(E_AXIS) const float unload_length = -ABS(parser.seen('U') ? parser.value_axis_units(E_AXIS)
: fc_settings[target_extruder].unload_length); : fc_settings[target_extruder].unload_length);
unload_filament(unload_length, true, ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT); unload_filament(unload_length, true, PAUSE_MODE_UNLOAD_FILAMENT);
} }
#endif #endif
@ -187,7 +187,7 @@ void GcodeSuite::M702() {
// Show status screen // Show status screen
#if HAS_LCD_MENU #if HAS_LCD_MENU
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS); lcd_pause_show_message(PAUSE_MESSAGE_STATUS);
#endif #endif
} }

View file

@ -1278,6 +1278,9 @@
#define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Press button") #define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Press button")
#define MSG_ADVANCED_PAUSE_WAITING_2 _UxGT("to resume print") #define MSG_ADVANCED_PAUSE_WAITING_2 _UxGT("to resume print")
#endif #endif
#ifndef MSG_PAUSE_PRINT_INIT_1
#define MSG_PAUSE_PRINT_INIT_1 _UxGT("Parking...")
#endif
#ifndef MSG_FILAMENT_CHANGE_INIT_1 #ifndef MSG_FILAMENT_CHANGE_INIT_1
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for") #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("filament change") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("filament change")

View file

@ -256,8 +256,8 @@
#define MSG_CONTROL_RETRACT_SWAP _UxGT("换手回抽长度mm") //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change #define MSG_CONTROL_RETRACT_SWAP _UxGT("换手回抽长度mm") //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change
#define MSG_CONTROL_RETRACTF _UxGT("回抽速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) #define MSG_CONTROL_RETRACTF _UxGT("回抽速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s)
#define MSG_CONTROL_RETRACT_ZHOP _UxGT("Hop mm") //"Hop mm" retract_zraise, retract Z-lift #define MSG_CONTROL_RETRACT_ZHOP _UxGT("Hop mm") //"Hop mm" retract_zraise, retract Z-lift
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("回抽恢复长度mm") //"UnRet +mm" retract_recover_length, additional recover length (mm, added to retract length when recovering) #define MSG_CONTROL_RETRACT_RECOVER _UxGT("回抽恢复长度mm") //"UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering)
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("换手回抽恢复长度mm") //"S UnRet+mm" swap_retract_recover_length, additional swap recover length (mm, added to retract length when recovering from extruder change) #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("换手回抽恢复长度mm") //"S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change)
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回抽恢复后进料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回抽恢复后进料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s)
#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") // "S UnRet V" #define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") // "S UnRet V"
#define MSG_AUTORETRACT _UxGT("自动抽回") //"AutoRetr." autoretract_enabled, #define MSG_AUTORETRACT _UxGT("自动抽回") //"AutoRetr." autoretract_enabled,

View file

@ -256,8 +256,8 @@
#define MSG_CONTROL_RETRACT_SWAP _UxGT("換手回抽長度mm") //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change #define MSG_CONTROL_RETRACT_SWAP _UxGT("換手回抽長度mm") //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change
#define MSG_CONTROL_RETRACTF _UxGT("回縮速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) #define MSG_CONTROL_RETRACTF _UxGT("回縮速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s)
#define MSG_CONTROL_RETRACT_ZHOP _UxGT("Hop mm") //"Hop mm" retract_zraise, retract Z-lift #define MSG_CONTROL_RETRACT_ZHOP _UxGT("Hop mm") //"Hop mm" retract_zraise, retract Z-lift
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("回縮恢復長度mm") //"UnRet +mm" retract_recover_length, additional recover length (mm, added to retract length when recovering) #define MSG_CONTROL_RETRACT_RECOVER _UxGT("回縮恢復長度mm") //"UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering)
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("換手回縮恢復長度mm") //"S UnRet+mm" swap_retract_recover_length, additional swap recover length (mm, added to retract length when recovering from extruder change) #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("換手回縮恢復長度mm") //"S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change)
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回縮恢復後進料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回縮恢復後進料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s)
#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") // "S UnRet V" #define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") // "S UnRet V"
#define MSG_AUTORETRACT _UxGT("自動回縮") //"AutoRetr." autoretract_enabled, #define MSG_AUTORETRACT _UxGT("自動回縮") //"AutoRetr." autoretract_enabled,

View file

@ -196,9 +196,9 @@ static void lcd_factory_settings() {
#endif #endif
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &fwretract.settings.retract_feedrate_mm_s, 1, 999); MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &fwretract.settings.retract_feedrate_mm_s, 1, 999);
MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_ZHOP, &fwretract.settings.retract_zraise, 0, 999); MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_ZHOP, &fwretract.settings.retract_zraise, 0, 999);
MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER, &fwretract.settings.retract_recover_length, -100, 100); MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER, &fwretract.settings.retract_recover_extra, -100, 100);
#if EXTRUDERS > 1 #if EXTRUDERS > 1
MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER_SWAP, &fwretract.settings.swap_retract_recover_length, -100, 100); MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER_SWAP, &fwretract.settings.swap_retract_recover_extra, -100, 100);
#endif #endif
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &fwretract.settings.retract_recover_feedrate_mm_s, 1, 999); MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &fwretract.settings.retract_recover_feedrate_mm_s, 1, 999);
#if EXTRUDERS > 1 #if EXTRUDERS > 1

View file

@ -34,19 +34,20 @@
#if HAS_FILAMENT_SENSOR #if HAS_FILAMENT_SENSOR
#include "../../feature/runout.h" #include "../../feature/runout.h"
#endif #endif
// //
// Change Filament > Change/Unload/Load Filament // Change Filament > Change/Unload/Load Filament
// //
static AdvancedPauseMode _change_filament_temp_mode; // =ADVANCED_PAUSE_MODE_PAUSE_PRINT static PauseMode _change_filament_temp_mode; // =PAUSE_MODE_PAUSE_PRINT
static int8_t _change_filament_temp_extruder; // =0 static int8_t _change_filament_temp_extruder; // =0
inline PGM_P _change_filament_temp_command() { inline PGM_P _change_filament_temp_command() {
switch (_change_filament_temp_mode) { switch (_change_filament_temp_mode) {
case ADVANCED_PAUSE_MODE_LOAD_FILAMENT: case PAUSE_MODE_LOAD_FILAMENT:
return PSTR("M701 T%d"); return PSTR("M701 T%d");
case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT: case PAUSE_MODE_UNLOAD_FILAMENT:
return _change_filament_temp_extruder >= 0 ? PSTR("M702 T%d") : PSTR("M702 ;%d"); return _change_filament_temp_extruder >= 0 ? PSTR("M702 T%d") : PSTR("M702 ;%d");
case ADVANCED_PAUSE_MODE_PAUSE_PRINT: case PAUSE_MODE_PAUSE_PRINT:
default: default:
return PSTR("M600 B0 T%d"); return PSTR("M600 B0 T%d");
} }
@ -63,18 +64,18 @@ inline void _lcd_change_filament_temp_1_func() { _change_filament_temp(ui.pre
inline void _lcd_change_filament_temp_2_func() { _change_filament_temp(ui.preheat_hotend_temp[1]); } inline void _lcd_change_filament_temp_2_func() { _change_filament_temp(ui.preheat_hotend_temp[1]); }
inline void _lcd_change_filament_temp_custom_cb() { _change_filament_temp(thermalManager.temp_hotend[_change_filament_temp_extruder].target); } inline void _lcd_change_filament_temp_custom_cb() { _change_filament_temp(thermalManager.temp_hotend[_change_filament_temp_extruder].target); }
static PGM_P change_filament_header(const AdvancedPauseMode mode) { static PGM_P change_filament_header(const PauseMode mode) {
switch (mode) { switch (mode) {
case ADVANCED_PAUSE_MODE_LOAD_FILAMENT: case PAUSE_MODE_LOAD_FILAMENT:
return PSTR(MSG_FILAMENTLOAD); return PSTR(MSG_FILAMENTLOAD);
case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT: case PAUSE_MODE_UNLOAD_FILAMENT:
return PSTR(MSG_FILAMENTUNLOAD); return PSTR(MSG_FILAMENTUNLOAD);
default: break; default: break;
} }
return PSTR(MSG_FILAMENTCHANGE); return PSTR(MSG_FILAMENTCHANGE);
} }
void _menu_temp_filament_op(const AdvancedPauseMode mode, const int8_t extruder) { void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) {
_change_filament_temp_mode = mode; _change_filament_temp_mode = mode;
_change_filament_temp_extruder = extruder; _change_filament_temp_extruder = extruder;
START_MENU(); START_MENU();
@ -105,28 +106,28 @@ void _menu_temp_filament_op(const AdvancedPauseMode mode, const int8_t extruder)
END_MENU(); END_MENU();
} }
#if E_STEPPERS #if E_STEPPERS
void menu_temp_e0_filament_change() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 0); } void menu_temp_e0_filament_change() { _menu_temp_filament_op(PAUSE_MODE_PAUSE_PRINT, 0); }
void menu_temp_e0_filament_load() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 0); } void menu_temp_e0_filament_load() { _menu_temp_filament_op(PAUSE_MODE_LOAD_FILAMENT, 0); }
void menu_temp_e0_filament_unload() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 0); } void menu_temp_e0_filament_unload() { _menu_temp_filament_op(PAUSE_MODE_UNLOAD_FILAMENT, 0); }
#if E_STEPPERS > 1 #if E_STEPPERS > 1
void menu_temp_e1_filament_change() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 1); } void menu_temp_e1_filament_change() { _menu_temp_filament_op(PAUSE_MODE_PAUSE_PRINT, 1); }
void menu_temp_e1_filament_load() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 1); } void menu_temp_e1_filament_load() { _menu_temp_filament_op(PAUSE_MODE_LOAD_FILAMENT, 1); }
void menu_temp_e1_filament_unload() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 1); } void menu_temp_e1_filament_unload() { _menu_temp_filament_op(PAUSE_MODE_UNLOAD_FILAMENT, 1); }
#if ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS) #if ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS)
void menu_unload_filament_all_temp() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, -1); } void menu_unload_filament_all_temp() { _menu_temp_filament_op(PAUSE_MODE_UNLOAD_FILAMENT, -1); }
#endif #endif
#if E_STEPPERS > 2 #if E_STEPPERS > 2
void menu_temp_e2_filament_change() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 2); } void menu_temp_e2_filament_change() { _menu_temp_filament_op(PAUSE_MODE_PAUSE_PRINT, 2); }
void menu_temp_e2_filament_load() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 2); } void menu_temp_e2_filament_load() { _menu_temp_filament_op(PAUSE_MODE_LOAD_FILAMENT, 2); }
void menu_temp_e2_filament_unload() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 2); } void menu_temp_e2_filament_unload() { _menu_temp_filament_op(PAUSE_MODE_UNLOAD_FILAMENT, 2); }
#if E_STEPPERS > 3 #if E_STEPPERS > 3
void menu_temp_e3_filament_change() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 3); } void menu_temp_e3_filament_change() { _menu_temp_filament_op(PAUSE_MODE_PAUSE_PRINT, 3); }
void menu_temp_e3_filament_load() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 3); } void menu_temp_e3_filament_load() { _menu_temp_filament_op(PAUSE_MODE_LOAD_FILAMENT, 3); }
void menu_temp_e3_filament_unload() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 3); } void menu_temp_e3_filament_unload() { _menu_temp_filament_op(PAUSE_MODE_UNLOAD_FILAMENT, 3); }
#if E_STEPPERS > 4 #if E_STEPPERS > 4
void menu_temp_e4_filament_change() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 4); } void menu_temp_e4_filament_change() { _menu_temp_filament_op(PAUSE_MODE_PAUSE_PRINT, 4); }
void menu_temp_e4_filament_load() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 4); } void menu_temp_e4_filament_load() { _menu_temp_filament_op(PAUSE_MODE_LOAD_FILAMENT, 4); }
void menu_temp_e4_filament_unload() { _menu_temp_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 4); } void menu_temp_e4_filament_unload() { _menu_temp_filament_op(PAUSE_MODE_UNLOAD_FILAMENT, 4); }
#endif // E_STEPPERS > 4 #endif // E_STEPPERS > 4
#endif // E_STEPPERS > 3 #endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2 #endif // E_STEPPERS > 2
@ -310,14 +311,13 @@ void _menu_temp_filament_op(const AdvancedPauseMode mode, const int8_t extruder)
} }
#endif #endif
static AdvancedPauseMode advanced_pause_mode = ADVANCED_PAUSE_MODE_PAUSE_PRINT;
static uint8_t hotend_status_extruder = 0; static uint8_t hotend_status_extruder = 0;
static PGM_P advanced_pause_header() { static PGM_P pause_header() {
switch (advanced_pause_mode) { switch (pause_mode) {
case ADVANCED_PAUSE_MODE_LOAD_FILAMENT: case PAUSE_MODE_LOAD_FILAMENT:
return PSTR(MSG_FILAMENT_CHANGE_HEADER_LOAD); return PSTR(MSG_FILAMENT_CHANGE_HEADER_LOAD);
case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT: case PAUSE_MODE_UNLOAD_FILAMENT:
return PSTR(MSG_FILAMENT_CHANGE_HEADER_UNLOAD); return PSTR(MSG_FILAMENT_CHANGE_HEADER_UNLOAD);
default: break; default: break;
} }
@ -340,26 +340,26 @@ static PGM_P advanced_pause_header() {
++_thisItemNr; \ ++_thisItemNr; \
}while(0) }while(0)
void lcd_advanced_pause_resume_print() { void lcd_pause_resume_print() {
advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_RESUME_PRINT; pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT;
} }
void lcd_advanced_pause_extrude_more() { void lcd_pause_extrude_more() {
advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE; pause_menu_response = PAUSE_RESPONSE_EXTRUDE_MORE;
} }
void menu_advanced_pause_option() { void menu_pause_option() {
START_MENU(); START_MENU();
#if LCD_HEIGHT > 2 #if LCD_HEIGHT > 2
STATIC_ITEM(MSG_FILAMENT_CHANGE_OPTION_HEADER, true, false); STATIC_ITEM(MSG_FILAMENT_CHANGE_OPTION_HEADER, true, false);
#endif #endif
MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_PURGE, lcd_advanced_pause_extrude_more); MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_PURGE, lcd_pause_extrude_more);
#if HAS_FILAMENT_SENSOR #if HAS_FILAMENT_SENSOR
if (runout.filament_ran_out) if (runout.filament_ran_out)
MENU_ITEM_EDIT_CALLBACK(bool, MSG_RUNOUT_SENSOR, &runout.enabled, runout.reset); MENU_ITEM_EDIT_CALLBACK(bool, MSG_RUNOUT_SENSOR, &runout.enabled, runout.reset);
else else
#endif #endif
MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_RESUME, lcd_advanced_pause_resume_print); MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_RESUME, lcd_pause_resume_print);
END_MENU(); END_MENU();
} }
@ -367,9 +367,9 @@ void menu_advanced_pause_option() {
// ADVANCED_PAUSE_FEATURE message screens // ADVANCED_PAUSE_FEATURE message screens
// //
void _lcd_advanced_pause_message(PGM_P const msg1, PGM_P const msg2=NULL, PGM_P const msg3=NULL) { void _lcd_pause_message(PGM_P const msg1, PGM_P const msg2=NULL, PGM_P const msg3=NULL) {
START_SCREEN(); START_SCREEN();
STATIC_ITEM_P(advanced_pause_header(), true, true); STATIC_ITEM_P(pause_header(), true, true);
STATIC_ITEM_P(msg1); STATIC_ITEM_P(msg1);
if (msg2) STATIC_ITEM_P(msg2); if (msg2) STATIC_ITEM_P(msg2);
if (msg3) STATIC_ITEM_P(msg3); if (msg3) STATIC_ITEM_P(msg3);
@ -378,8 +378,19 @@ void _lcd_advanced_pause_message(PGM_P const msg1, PGM_P const msg2=NULL, PGM_P
END_SCREEN(); END_SCREEN();
} }
void lcd_advanced_pause_init_message() { void lcd_pause_pausing_message() {
_lcd_advanced_pause_message(PSTR(MSG_FILAMENT_CHANGE_INIT_1) _lcd_pause_message(PSTR(MSG_PAUSE_PRINT_INIT_1)
#ifdef MSG_PAUSE_PRINT_INIT_2
, PSTR(MSG_PAUSE_PRINT_INIT_2)
#ifdef MSG_PAUSE_PRINT_INIT_3
, PSTR(MSG_PAUSE_PRINT_INIT_3)
#endif
#endif
);
}
void lcd_pause_changing_message() {
_lcd_pause_message(PSTR(MSG_FILAMENT_CHANGE_INIT_1)
#ifdef MSG_FILAMENT_CHANGE_INIT_2 #ifdef MSG_FILAMENT_CHANGE_INIT_2
, PSTR(MSG_FILAMENT_CHANGE_INIT_2) , PSTR(MSG_FILAMENT_CHANGE_INIT_2)
#ifdef MSG_FILAMENT_CHANGE_INIT_3 #ifdef MSG_FILAMENT_CHANGE_INIT_3
@ -389,8 +400,8 @@ void lcd_advanced_pause_init_message() {
); );
} }
void lcd_advanced_pause_unload_message() { void lcd_pause_unload_message() {
_lcd_advanced_pause_message(PSTR(MSG_FILAMENT_CHANGE_UNLOAD_1) _lcd_pause_message(PSTR(MSG_FILAMENT_CHANGE_UNLOAD_1)
#ifdef MSG_FILAMENT_CHANGE_UNLOAD_2 #ifdef MSG_FILAMENT_CHANGE_UNLOAD_2
, PSTR(MSG_FILAMENT_CHANGE_UNLOAD_2) , PSTR(MSG_FILAMENT_CHANGE_UNLOAD_2)
#ifdef MSG_FILAMENT_CHANGE_UNLOAD_3 #ifdef MSG_FILAMENT_CHANGE_UNLOAD_3
@ -400,8 +411,8 @@ void lcd_advanced_pause_unload_message() {
); );
} }
void lcd_advanced_pause_heating_message() { void lcd_pause_heating_message() {
_lcd_advanced_pause_message(PSTR(MSG_FILAMENT_CHANGE_HEATING_1) _lcd_pause_message(PSTR(MSG_FILAMENT_CHANGE_HEATING_1)
#ifdef MSG_FILAMENT_CHANGE_HEATING_2 #ifdef MSG_FILAMENT_CHANGE_HEATING_2
, PSTR(MSG_FILAMENT_CHANGE_HEATING_2) , PSTR(MSG_FILAMENT_CHANGE_HEATING_2)
#ifdef MSG_FILAMENT_CHANGE_HEATING_3 #ifdef MSG_FILAMENT_CHANGE_HEATING_3
@ -411,8 +422,8 @@ void lcd_advanced_pause_heating_message() {
); );
} }
void lcd_advanced_pause_heat_message() { void lcd_pause_heat_message() {
_lcd_advanced_pause_message(PSTR(MSG_FILAMENT_CHANGE_HEAT_1) _lcd_pause_message(PSTR(MSG_FILAMENT_CHANGE_HEAT_1)
#ifdef MSG_FILAMENT_CHANGE_HEAT_2 #ifdef MSG_FILAMENT_CHANGE_HEAT_2
, PSTR(MSG_FILAMENT_CHANGE_HEAT_2) , PSTR(MSG_FILAMENT_CHANGE_HEAT_2)
#ifdef MSG_FILAMENT_CHANGE_HEAT_3 #ifdef MSG_FILAMENT_CHANGE_HEAT_3
@ -422,8 +433,8 @@ void lcd_advanced_pause_heat_message() {
); );
} }
void lcd_advanced_pause_insert_message() { void lcd_pause_insert_message() {
_lcd_advanced_pause_message(PSTR(MSG_FILAMENT_CHANGE_INSERT_1) _lcd_pause_message(PSTR(MSG_FILAMENT_CHANGE_INSERT_1)
#ifdef MSG_FILAMENT_CHANGE_INSERT_2 #ifdef MSG_FILAMENT_CHANGE_INSERT_2
, PSTR(MSG_FILAMENT_CHANGE_INSERT_2) , PSTR(MSG_FILAMENT_CHANGE_INSERT_2)
#ifdef MSG_FILAMENT_CHANGE_INSERT_3 #ifdef MSG_FILAMENT_CHANGE_INSERT_3
@ -433,8 +444,8 @@ void lcd_advanced_pause_insert_message() {
); );
} }
void lcd_advanced_pause_load_message() { void lcd_pause_load_message() {
_lcd_advanced_pause_message(PSTR(MSG_FILAMENT_CHANGE_LOAD_1) _lcd_pause_message(PSTR(MSG_FILAMENT_CHANGE_LOAD_1)
#ifdef MSG_FILAMENT_CHANGE_LOAD_2 #ifdef MSG_FILAMENT_CHANGE_LOAD_2
, PSTR(MSG_FILAMENT_CHANGE_LOAD_2) , PSTR(MSG_FILAMENT_CHANGE_LOAD_2)
#ifdef MSG_FILAMENT_CHANGE_LOAD_3 #ifdef MSG_FILAMENT_CHANGE_LOAD_3
@ -444,8 +455,8 @@ void lcd_advanced_pause_load_message() {
); );
} }
void lcd_advanced_pause_waiting_message() { void lcd_pause_waiting_message() {
_lcd_advanced_pause_message(PSTR(MSG_ADVANCED_PAUSE_WAITING_1) _lcd_pause_message(PSTR(MSG_ADVANCED_PAUSE_WAITING_1)
#ifdef MSG_ADVANCED_PAUSE_WAITING_2 #ifdef MSG_ADVANCED_PAUSE_WAITING_2
, PSTR(MSG_ADVANCED_PAUSE_WAITING_2) , PSTR(MSG_ADVANCED_PAUSE_WAITING_2)
#ifdef MSG_ADVANCED_PAUSE_WAITING_3 #ifdef MSG_ADVANCED_PAUSE_WAITING_3
@ -455,8 +466,8 @@ void lcd_advanced_pause_waiting_message() {
); );
} }
void lcd_advanced_pause_resume_message() { void lcd_pause_resume_message() {
_lcd_advanced_pause_message(PSTR(MSG_FILAMENT_CHANGE_RESUME_1) _lcd_pause_message(PSTR(MSG_FILAMENT_CHANGE_RESUME_1)
#ifdef MSG_FILAMENT_CHANGE_RESUME_2 #ifdef MSG_FILAMENT_CHANGE_RESUME_2
, PSTR(MSG_FILAMENT_CHANGE_RESUME_2) , PSTR(MSG_FILAMENT_CHANGE_RESUME_2)
#ifdef MSG_FILAMENT_CHANGE_RESUME_3 #ifdef MSG_FILAMENT_CHANGE_RESUME_3
@ -466,8 +477,8 @@ void lcd_advanced_pause_resume_message() {
); );
} }
void lcd_advanced_pause_purge_message() { void lcd_pause_purge_message() {
_lcd_advanced_pause_message( _lcd_pause_message(
#if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE) #if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE)
PSTR(MSG_FILAMENT_CHANGE_CONT_PURGE_1) PSTR(MSG_FILAMENT_CHANGE_CONT_PURGE_1)
#ifdef MSG_FILAMENT_CHANGE_CONT_PURGE_2 #ifdef MSG_FILAMENT_CHANGE_CONT_PURGE_2
@ -488,31 +499,32 @@ void lcd_advanced_pause_purge_message() {
); );
} }
FORCE_INLINE screenFunc_t ap_message_screen(const AdvancedPauseMessage message) { FORCE_INLINE screenFunc_t ap_message_screen(const PauseMessage message) {
switch (message) { switch (message) {
case ADVANCED_PAUSE_MESSAGE_INIT: return lcd_advanced_pause_init_message; case PAUSE_MESSAGE_PAUSING: return lcd_pause_pausing_message;
case ADVANCED_PAUSE_MESSAGE_UNLOAD: return lcd_advanced_pause_unload_message; case PAUSE_MESSAGE_CHANGING: return lcd_pause_changing_message;
case ADVANCED_PAUSE_MESSAGE_WAITING: return lcd_advanced_pause_waiting_message; case PAUSE_MESSAGE_UNLOAD: return lcd_pause_unload_message;
case ADVANCED_PAUSE_MESSAGE_INSERT: return lcd_advanced_pause_insert_message; case PAUSE_MESSAGE_WAITING: return lcd_pause_waiting_message;
case ADVANCED_PAUSE_MESSAGE_LOAD: return lcd_advanced_pause_load_message; case PAUSE_MESSAGE_INSERT: return lcd_pause_insert_message;
case ADVANCED_PAUSE_MESSAGE_PURGE: return lcd_advanced_pause_purge_message; case PAUSE_MESSAGE_LOAD: return lcd_pause_load_message;
case ADVANCED_PAUSE_MESSAGE_RESUME: return lcd_advanced_pause_resume_message; case PAUSE_MESSAGE_PURGE: return lcd_pause_purge_message;
case ADVANCED_PAUSE_MESSAGE_HEAT: return lcd_advanced_pause_heat_message; case PAUSE_MESSAGE_RESUME: return lcd_pause_resume_message;
case ADVANCED_PAUSE_MESSAGE_HEATING: return lcd_advanced_pause_heating_message; case PAUSE_MESSAGE_HEAT: return lcd_pause_heat_message;
case ADVANCED_PAUSE_MESSAGE_OPTION: advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_WAIT_FOR; case PAUSE_MESSAGE_HEATING: return lcd_pause_heating_message;
return menu_advanced_pause_option; case PAUSE_MESSAGE_OPTION: pause_menu_response = PAUSE_RESPONSE_WAIT_FOR;
case ADVANCED_PAUSE_MESSAGE_STATUS: return menu_pause_option;
case PAUSE_MESSAGE_STATUS:
default: break; default: break;
} }
return NULL; return NULL;
} }
void lcd_advanced_pause_show_message( void lcd_pause_show_message(
const AdvancedPauseMessage message, const PauseMessage message,
const AdvancedPauseMode mode/*=ADVANCED_PAUSE_MODE_SAME*/, const PauseMode mode/*=PAUSE_MODE_SAME*/,
const uint8_t extruder/*=active_extruder*/ const uint8_t extruder/*=active_extruder*/
) { ) {
if (mode != ADVANCED_PAUSE_MODE_SAME) advanced_pause_mode = mode; if (mode != PAUSE_MODE_SAME) pause_mode = mode;
hotend_status_extruder = extruder; hotend_status_extruder = extruder;
const screenFunc_t next_screen = ap_message_screen(message); const screenFunc_t next_screen = ap_message_screen(message);
if (next_screen) { if (next_screen) {

View file

@ -61,7 +61,7 @@
#endif #endif
#if ENABLED(PARK_HEAD_ON_PAUSE) #if ENABLED(PARK_HEAD_ON_PAUSE)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT, ADVANCED_PAUSE_MODE_PAUSE_PRINT); // Show message immediately to let user know about pause in progress lcd_pause_show_message(PAUSE_MESSAGE_PAUSING, PAUSE_MODE_PAUSE_PRINT); // Show message immediately to let user know about pause in progress
enqueue_and_echo_commands_P(PSTR("M25 P\nM24")); enqueue_and_echo_commands_P(PSTR("M25 P\nM24"));
#elif ENABLED(SDSUPPORT) #elif ENABLED(SDSUPPORT)
enqueue_and_echo_commands_P(PSTR("M25")); enqueue_and_echo_commands_P(PSTR("M25"));

View file

@ -183,7 +183,7 @@ inline void action_mmu2_M600_loadCurrentFilamentToNozzle() { mmu2.loadFilamentTo
inline void action_mmu2_M600_unloadFilament() { mmu2.unload(); } inline void action_mmu2_M600_unloadFilament() { mmu2.unload(); }
inline void action_mmu2_M600_resume() { mmuMenuWait = false; } inline void action_mmu2_M600_resume() { mmuMenuWait = false; }
void menu_mmu2_advanced_pause() { void menu_mmu2_pause() {
currentTool = mmu2.getCurrentTool(); currentTool = mmu2.getCurrentTool();
START_MENU(); START_MENU();
#if LCD_HEIGHT > 2 #if LCD_HEIGHT > 2
@ -198,7 +198,7 @@ void menu_mmu2_advanced_pause() {
void mmu2_M600() { void mmu2_M600() {
ui.defer_status_screen(true); ui.defer_status_screen(true);
ui.goto_screen(menu_mmu2_advanced_pause); ui.goto_screen(menu_mmu2_pause);
mmuMenuWait = true; mmuMenuWait = true;
while (mmuMenuWait) idle(); while (mmuMenuWait) idle();
} }

View file

@ -89,8 +89,8 @@
extern float move_menu_scale; extern float move_menu_scale;
#if ENABLED(ADVANCED_PAUSE_FEATURE) #if ENABLED(ADVANCED_PAUSE_FEATURE)
void lcd_advanced_pause_show_message(const AdvancedPauseMessage message, void lcd_pause_show_message(const PauseMessage message,
const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_SAME, const PauseMode mode=PAUSE_MODE_SAME,
const uint8_t extruder=active_extruder); const uint8_t extruder=active_extruder);
#endif #endif

View file

@ -2733,8 +2733,8 @@ void MarlinSettings::reset() {
CONFIG_ECHO_HEADING("Recover: S<length> F<units/m>"); CONFIG_ECHO_HEADING("Recover: S<length> F<units/m>");
CONFIG_ECHO_START(); CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR( SERIAL_ECHOLNPAIR(
" M208 S", LINEAR_UNIT(fwretract.settings.retract_recover_length) " M208 S", LINEAR_UNIT(fwretract.settings.retract_recover_extra)
, " W", LINEAR_UNIT(fwretract.settings.swap_retract_recover_length) , " W", LINEAR_UNIT(fwretract.settings.swap_retract_recover_extra)
, " F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_recover_feedrate_mm_s)) , " F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_recover_feedrate_mm_s))
); );