diff --git a/Marlin/src/core/utility.cpp b/Marlin/src/core/utility.cpp
index f970c46a6..c220368fe 100644
--- a/Marlin/src/core/utility.cpp
+++ b/Marlin/src/core/utility.cpp
@@ -333,7 +333,7 @@ void safe_delay(millis_t ms) {
       #elif ENABLED(AUTO_BED_LEVELING_UBL)
         SERIAL_ECHOPGM("UBL");
       #endif
-      if (leveling_is_active()) {
+      if (LEVELING_IS_ACTIVE()) {
         SERIAL_ECHOLNPGM(" (enabled)");
         #if ABL_PLANAR
           const float diff[XYZ] = {
@@ -364,7 +364,7 @@ void safe_delay(millis_t ms) {
     #elif ENABLED(MESH_BED_LEVELING)
 
       SERIAL_ECHOPGM("Mesh Bed Leveling");
-      if (leveling_is_active()) {
+      if (LEVELING_IS_ACTIVE()) {
         float lz = current_position[Z_AXIS];
         planner.apply_leveling(current_position[X_AXIS], current_position[Y_AXIS], lz);
         SERIAL_ECHOLNPGM(" (enabled)");
diff --git a/Marlin/src/feature/bedlevel/bedlevel.cpp b/Marlin/src/feature/bedlevel/bedlevel.cpp
index 8d944e036..e8a123c6b 100644
--- a/Marlin/src/feature/bedlevel/bedlevel.cpp
+++ b/Marlin/src/feature/bedlevel/bedlevel.cpp
@@ -55,18 +55,6 @@ bool leveling_is_valid() {
   ;
 }
 
-bool leveling_is_active() {
-  return
-    #if ENABLED(MESH_BED_LEVELING)
-      mbl.active()
-    #elif ENABLED(AUTO_BED_LEVELING_UBL)
-      ubl.state.active
-    #else // OLDSCHOOL_ABL
-      planner.abl_enabled
-    #endif
-  ;
-}
-
 /**
  * Turn bed leveling on or off, fixing the current
  * position as-needed.
@@ -82,7 +70,7 @@ void set_bed_leveling_enabled(const bool enable/*=true*/) {
     constexpr bool can_change = true;
   #endif
 
-  if (can_change && enable != leveling_is_active()) {
+  if (can_change && enable != LEVELING_IS_ACTIVE()) {
 
     #if ENABLED(MESH_BED_LEVELING)
 
@@ -143,7 +131,7 @@ void set_bed_leveling_enabled(const bool enable/*=true*/) {
 
   void set_z_fade_height(const float zfh) {
 
-    const bool level_active = leveling_is_active();
+    const bool level_active = LEVELING_IS_ACTIVE();
 
     #if ENABLED(AUTO_BED_LEVELING_UBL)
 
diff --git a/Marlin/src/feature/bedlevel/bedlevel.h b/Marlin/src/feature/bedlevel/bedlevel.h
index 31c444cf1..cdf1be258 100644
--- a/Marlin/src/feature/bedlevel/bedlevel.h
+++ b/Marlin/src/feature/bedlevel/bedlevel.h
@@ -40,10 +40,19 @@
 #endif
 
 bool leveling_is_valid();
-bool leveling_is_active();
 void set_bed_leveling_enabled(const bool enable=true);
 void reset_bed_level();
 
+#if ENABLED(MESH_BED_LEVELING)
+  #define LEVELING_IS_ACTIVE() (mbl.active())
+#elif ENABLED(AUTO_BED_LEVELING_UBL)
+  #define LEVELING_IS_ACTIVE() (ubl.state.active)
+#elif HAS_ABL
+  #define LEVELING_IS_ACTIVE() (planner.abl_enabled)
+#else
+  #define LEVELING_IS_ACTIVE() (false)
+#endif
+
 #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
   void set_z_fade_height(const float zfh);
 #endif
diff --git a/Marlin/src/gcode/bedlevel/M420.cpp b/Marlin/src/gcode/bedlevel/M420.cpp
index 994a37e17..5fe1dfe1b 100644
--- a/Marlin/src/gcode/bedlevel/M420.cpp
+++ b/Marlin/src/gcode/bedlevel/M420.cpp
@@ -112,7 +112,7 @@ void GcodeSuite::M420() {
     if (parser.seen('Z')) set_z_fade_height(parser.value_linear_units());
   #endif
 
-  const bool new_status = leveling_is_active();
+  const bool new_status = LEVELING_IS_ACTIVE();
 
   if (to_enable && !new_status) {
     SERIAL_ERROR_START();
diff --git a/Marlin/src/gcode/bedlevel/abl/G29.cpp b/Marlin/src/gcode/bedlevel/abl/G29.cpp
index fa1c70c85..218a1c6d3 100644
--- a/Marlin/src/gcode/bedlevel/abl/G29.cpp
+++ b/Marlin/src/gcode/bedlevel/abl/G29.cpp
@@ -247,7 +247,7 @@ void GcodeSuite::G29() {
       abl_probe_index = -1;
     #endif
 
-    abl_should_enable = leveling_is_active();
+    abl_should_enable = LEVELING_IS_ACTIVE();
 
     #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
 
@@ -964,7 +964,7 @@ void GcodeSuite::G29() {
 
   KEEPALIVE_STATE(IN_HANDLER);
 
-  if (planner.abl_enabled)
+  if (LEVELING_IS_ACTIVE())
     SYNC_PLAN_POSITION_KINEMATIC();
 }
 
diff --git a/Marlin/src/gcode/bedlevel/mbl/G29.cpp b/Marlin/src/gcode/bedlevel/mbl/G29.cpp
index 64ff57e2b..cd96bbf35 100644
--- a/Marlin/src/gcode/bedlevel/mbl/G29.cpp
+++ b/Marlin/src/gcode/bedlevel/mbl/G29.cpp
@@ -92,7 +92,7 @@ void GcodeSuite::G29() {
   switch (state) {
     case MeshReport:
       if (leveling_is_valid()) {
-        SERIAL_PROTOCOLLNPAIR("State: ", leveling_is_active() ? MSG_ON : MSG_OFF);
+        SERIAL_PROTOCOLLNPAIR("State: ", LEVELING_IS_ACTIVE() ? MSG_ON : MSG_OFF);
         mbl_mesh_report();
       }
       else
diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp
index df4109a03..d960088bb 100644
--- a/Marlin/src/gcode/calibrate/G28.cpp
+++ b/Marlin/src/gcode/calibrate/G28.cpp
@@ -157,7 +157,7 @@ void GcodeSuite::G28(const bool always_home_all) {
   // Disable the leveling matrix before homing
   #if HAS_LEVELING
     #if ENABLED(AUTO_BED_LEVELING_UBL)
-      const bool ubl_state_at_entry = leveling_is_active();
+      const bool ubl_state_at_entry = LEVELING_IS_ACTIVE();
     #endif
     set_bed_leveling_enabled(false);
   #endif
diff --git a/Marlin/src/gcode/calibrate/M48.cpp b/Marlin/src/gcode/calibrate/M48.cpp
index 4c32933b0..d3c551f17 100644
--- a/Marlin/src/gcode/calibrate/M48.cpp
+++ b/Marlin/src/gcode/calibrate/M48.cpp
@@ -32,6 +32,10 @@
   #include "../../feature/bedlevel/bedlevel.h"
 #endif
 
+#if HAS_LEVELING
+  #include "../../module/planner.h"
+#endif
+
 /**
  * M48: Z probe repeatability measurement function.
  *
@@ -115,7 +119,7 @@ void GcodeSuite::M48() {
   // Disable bed level correction in M48 because we want the raw data when we probe
 
   #if HAS_LEVELING
-    const bool was_enabled = leveling_is_active();
+    const bool was_enabled = LEVELING_IS_ACTIVE();
     set_bed_leveling_enabled(false);
   #endif
 
diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp
index 6a3728cc9..5ea064803 100644
--- a/Marlin/src/lcd/ultralcd.cpp
+++ b/Marlin/src/lcd/ultralcd.cpp
@@ -1086,7 +1086,7 @@ void kill_screen(const char* lcd_msg) {
           const float new_zoffset = zprobe_zoffset + planner.steps_to_mm[Z_AXIS] * babystep_increment;
           if (WITHIN(new_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) {
 
-            if (leveling_is_active())
+            if (LEVELING_IS_ACTIVE())
               thermalManager.babystep_axis(Z_AXIS, babystep_increment);
 
             zprobe_zoffset = new_zoffset;
@@ -1934,7 +1934,7 @@ void kill_screen(const char* lcd_msg) {
       if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS]))
         MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
       else if (leveling_is_valid()) {
-        _level_state = leveling_is_active();
+        _level_state = LEVELING_IS_ACTIVE();
         MENU_ITEM_EDIT_CALLBACK(bool, MSG_BED_LEVELING, &_level_state, _lcd_toggle_bed_leveling);
       }
 
diff --git a/Marlin/src/lcd/ultralcd_impl_HD44780.h b/Marlin/src/lcd/ultralcd_impl_HD44780.h
index 488e3f195..108451d3b 100644
--- a/Marlin/src/lcd/ultralcd_impl_HD44780.h
+++ b/Marlin/src/lcd/ultralcd_impl_HD44780.h
@@ -795,7 +795,7 @@ static void lcd_implementation_status_screen() {
     lcd.print(ftostr52sp(FIXFLOAT(current_position[Z_AXIS])));
 
     #if HAS_LEVELING
-      lcd.write(leveling_is_active() || blink ? '_' : ' ');
+      lcd.write(LEVELING_IS_ACTIVE() || blink ? '_' : ' ');
     #endif
 
   #endif // LCD_HEIGHT > 2
diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp
index 88bd2ad86..49cc205c5 100644
--- a/Marlin/src/module/configuration_store.cpp
+++ b/Marlin/src/module/configuration_store.cpp
@@ -1556,7 +1556,7 @@ void MarlinSettings::reset() {
         SERIAL_ECHOLNPGM(":");
       }
       CONFIG_ECHO_START;
-      SERIAL_ECHOPAIR("  M420 S", leveling_is_active() ? 1 : 0);
+      SERIAL_ECHOPAIR("  M420 S", LEVELING_IS_ACTIVE() ? 1 : 0);
       #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
         SERIAL_ECHOPAIR(" Z", planner.z_fade_height);
       #endif
@@ -1578,7 +1578,7 @@ void MarlinSettings::reset() {
         SERIAL_ECHOLNPGM("Auto Bed Leveling:");
       }
       CONFIG_ECHO_START;
-      SERIAL_ECHOPAIR("  M420 S", leveling_is_active() ? 1 : 0);
+      SERIAL_ECHOPAIR("  M420 S", LEVELING_IS_ACTIVE() ? 1 : 0);
       #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
         SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height));
       #endif
diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp
index 87cf0b9bf..0704e28c8 100644
--- a/Marlin/src/module/motion.cpp
+++ b/Marlin/src/module/motion.cpp
@@ -490,14 +490,14 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS },
   #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
     #if ENABLED(DELTA)
       #define ADJUST_DELTA(V) \
-        if (planner.abl_enabled) { \
+        if (LEVELING_IS_ACTIVE()) { \
           const float zadj = bilinear_z_offset(V); \
           delta[A_AXIS] += zadj; \
           delta[B_AXIS] += zadj; \
           delta[C_AXIS] += zadj; \
         }
     #else
-      #define ADJUST_DELTA(V) if (planner.abl_enabled) { delta[Z_AXIS] += bilinear_z_offset(V); }
+      #define ADJUST_DELTA(V) if (LEVELING_IS_ACTIVE()) { delta[Z_AXIS] += bilinear_z_offset(V); }
     #endif
   #else
     #define ADJUST_DELTA(V) NOOP
diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp
index 7d55a0df9..a7fed29e1 100644
--- a/Marlin/src/module/planner.cpp
+++ b/Marlin/src/module/planner.cpp
@@ -555,8 +555,9 @@ void Planner::calculate_volumetric_multipliers() {
    */
   void Planner::apply_leveling(float &lx, float &ly, float &lz) {
 
+    if (!LEVELING_IS_ACTIVE()) return;
+
     #if ENABLED(AUTO_BED_LEVELING_UBL)
-      if (!ubl.state.active) return;
       #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
         // if z_fade_height enabled (nonzero) and raw_z above it, no leveling required
         if (planner.z_fade_height && planner.z_fade_height <= RAW_Z_POSITION(lz)) return;
@@ -566,10 +567,6 @@ void Planner::calculate_volumetric_multipliers() {
       #endif // FADE
     #endif // UBL
 
-    #if OLDSCHOOL_ABL
-      if (!abl_enabled) return;
-    #endif
-
     #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) && DISABLED(AUTO_BED_LEVELING_UBL)
       static float z_fade_factor = 1.0, last_raw_lz = -999.0;
       if (z_fade_height) {
@@ -586,12 +583,11 @@ void Planner::calculate_volumetric_multipliers() {
 
     #if ENABLED(MESH_BED_LEVELING)
 
-      if (mbl.active())
-        lz += mbl.get_z(RAW_X_POSITION(lx), RAW_Y_POSITION(ly)
-          #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
-            , z_fade_factor
-          #endif
-          );
+      lz += mbl.get_z(RAW_X_POSITION(lx), RAW_Y_POSITION(ly)
+        #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
+          , z_fade_factor
+        #endif
+        );
 
     #elif ABL_PLANAR
 
@@ -654,9 +650,7 @@ void Planner::calculate_volumetric_multipliers() {
 
     #endif
 
-    #if OLDSCHOOL_ABL
-      if (!abl_enabled) return;
-    #endif
+    if (!LEVELING_IS_ACTIVE()) return;
 
     #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
       if (z_fade_height && RAW_Z_POSITION(logical[Z_AXIS]) >= z_fade_height) return;
@@ -664,14 +658,12 @@ void Planner::calculate_volumetric_multipliers() {
 
     #if ENABLED(MESH_BED_LEVELING)
 
-      if (mbl.active()) {
-        #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
-          const float c = mbl.get_z(RAW_X_POSITION(logical[X_AXIS]), RAW_Y_POSITION(logical[Y_AXIS]), 1.0);
-          logical[Z_AXIS] = (z_fade_height * (RAW_Z_POSITION(logical[Z_AXIS]) - c)) / (z_fade_height - c);
-        #else
-          logical[Z_AXIS] -= mbl.get_z(RAW_X_POSITION(logical[X_AXIS]), RAW_Y_POSITION(logical[Y_AXIS]));
-        #endif
-      }
+      #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
+        const float c = mbl.get_z(RAW_X_POSITION(logical[X_AXIS]), RAW_Y_POSITION(logical[Y_AXIS]), 1.0);
+        logical[Z_AXIS] = (z_fade_height * (RAW_Z_POSITION(logical[Z_AXIS]) - c)) / (z_fade_height - c);
+      #else
+        logical[Z_AXIS] -= mbl.get_z(RAW_X_POSITION(logical[X_AXIS]), RAW_Y_POSITION(logical[Y_AXIS]));
+      #endif
 
     #elif ABL_PLANAR
 
diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp
index 98185f6a5..743cefb0d 100644
--- a/Marlin/src/module/probe.cpp
+++ b/Marlin/src/module/probe.cpp
@@ -679,7 +679,7 @@ void refresh_zprobe_zoffset(const bool no_babystep/*=false*/) {
     #endif
 
     #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
-      if (!no_babystep && leveling_is_active())
+      if (!no_babystep && LEVELING_IS_ACTIVE())
         thermalManager.babystep_axis(Z_AXIS, -LROUND(diff * planner.axis_steps_per_mm[Z_AXIS]));
     #else
       UNUSED(no_babystep);
diff --git a/Marlin/src/module/tool_change.cpp b/Marlin/src/module/tool_change.cpp
index 758044292..8594fa9c4 100644
--- a/Marlin/src/module/tool_change.cpp
+++ b/Marlin/src/module/tool_change.cpp
@@ -464,7 +464,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
 
             #if ENABLED(MESH_BED_LEVELING)
 
-              if (leveling_is_active()) {
+              if (LEVELING_IS_ACTIVE()) {
                 #if ENABLED(DEBUG_LEVELING_FEATURE)
                   if (DEBUGGING(LEVELING)) SERIAL_ECHOPAIR("Z before MBL: ", current_position[Z_AXIS]);
                 #endif