Add option to invert joystick axes (#16466)

This commit is contained in:
Jamie 2020-01-05 02:01:05 -06:00 committed by Scott Lahteine
parent 022b6b9067
commit 9b970cf12f
133 changed files with 681 additions and 138 deletions

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -42,25 +42,40 @@ Joystick joystick;
#if HAS_JOY_ADC_X #if HAS_JOY_ADC_X
temp_info_t Joystick::x; // = { 0 } temp_info_t Joystick::x; // = { 0 }
#if ENABLED(INVERT_JOY_X)
#define JOY_X(N) (16383 - (N))
#else
#define JOY_X(N) (N)
#endif
#endif #endif
#if HAS_JOY_ADC_Y #if HAS_JOY_ADC_Y
temp_info_t Joystick::y; // = { 0 } temp_info_t Joystick::y; // = { 0 }
#if ENABLED(INVERT_JOY_Y)
#define JOY_Y(N) (16383 - (N))
#else
#define JOY_Y(N) (N)
#endif
#endif #endif
#if HAS_JOY_ADC_Z #if HAS_JOY_ADC_Z
temp_info_t Joystick::z; // = { 0 } temp_info_t Joystick::z; // = { 0 }
#if ENABLED(INVERT_JOY_Z)
#define JOY_Z(N) (16383 - (N))
#else
#define JOY_Z(N) (N)
#endif
#endif #endif
#if ENABLED(JOYSTICK_DEBUG) #if ENABLED(JOYSTICK_DEBUG)
void Joystick::report() { void Joystick::report() {
SERIAL_ECHOPGM("Joystick"); SERIAL_ECHOPGM("Joystick");
#if HAS_JOY_ADC_X #if HAS_JOY_ADC_X
SERIAL_ECHOPAIR_P(SP_X_STR, x.raw); SERIAL_ECHOPAIR_P(SP_X_STR, JOY_X(x.raw));
#endif #endif
#if HAS_JOY_ADC_Y #if HAS_JOY_ADC_Y
SERIAL_ECHOPAIR_P(SP_Y_STR, y.raw); SERIAL_ECHOPAIR_P(SP_Y_STR, JOY_Y(y.raw));
#endif #endif
#if HAS_JOY_ADC_Z #if HAS_JOY_ADC_Z
SERIAL_ECHOPAIR_P(SP_Z_STR, z.raw); SERIAL_ECHOPAIR_P(SP_Z_STR, JOY_Z(z.raw));
#endif #endif
#if HAS_JOY_ADC_EN #if HAS_JOY_ADC_EN
SERIAL_ECHO_TERNARY(READ(JOY_EN_PIN), " EN=", "HIGH (dis", "LOW (en", "abled)"); SERIAL_ECHO_TERNARY(READ(JOY_EN_PIN), " EN=", "HIGH (dis", "LOW (en", "abled)");
@ -91,15 +106,15 @@ Joystick joystick;
#if HAS_JOY_ADC_X #if HAS_JOY_ADC_X
static constexpr int16_t joy_x_limits[4] = JOY_X_LIMITS; static constexpr int16_t joy_x_limits[4] = JOY_X_LIMITS;
_normalize_joy(norm_jog.x, x.raw, joy_x_limits); _normalize_joy(norm_jog.x, JOY_X(x.raw), joy_x_limits);
#endif #endif
#if HAS_JOY_ADC_Y #if HAS_JOY_ADC_Y
static constexpr int16_t joy_y_limits[4] = JOY_Y_LIMITS; static constexpr int16_t joy_y_limits[4] = JOY_Y_LIMITS;
_normalize_joy(norm_jog.y, y.raw, joy_y_limits); _normalize_joy(norm_jog.y, JOY_Y(y.raw), joy_y_limits);
#endif #endif
#if HAS_JOY_ADC_Z #if HAS_JOY_ADC_Z
static constexpr int16_t joy_z_limits[4] = JOY_Z_LIMITS; static constexpr int16_t joy_z_limits[4] = JOY_Z_LIMITS;
_normalize_joy(norm_jog.z, z.raw, joy_z_limits); _normalize_joy(norm_jog.z, JOY_Z(z.raw), joy_z_limits);
#endif #endif
} }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2774,7 +2774,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2764,7 +2764,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2767,7 +2767,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2771,7 +2771,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2766,7 +2766,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2759,7 +2759,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2762,7 +2762,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2767,7 +2767,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2767,7 +2767,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2762,7 +2762,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2762,7 +2762,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2762,7 +2762,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2762,7 +2762,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2755,7 +2755,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2768,7 +2768,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2768,7 +2768,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2760,7 +2760,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2764,7 +2764,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2616,7 +2616,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2760,7 +2760,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2776,7 +2776,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2764,7 +2764,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2765,7 +2765,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2763,7 +2763,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }

View file

@ -2764,7 +2764,11 @@
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
// Use M119 to find reasonable values after connecting your hardware: //#define INVERT_JOY_X // Enable if X direction is reversed
//#define INVERT_JOY_Y // Enable if Y direction is reversed
//#define INVERT_JOY_Z // Enable if Z direction is reversed
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }