Tweak some config spacing
This commit is contained in:
parent
49ea1c635a
commit
a31cb910f5
187 changed files with 719 additions and 719 deletions
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -828,7 +828,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1521,7 +1521,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -842,7 +842,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1510,7 +1510,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -833,7 +833,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1501,7 +1501,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -700,7 +700,7 @@
|
|||
* Override with M92
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT {100, 100, 400, 95 }
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95 }
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -700,7 +700,7 @@
|
|||
* Override with M92
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT {100, 100, 400, 95 }
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95 }
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -724,8 +724,8 @@
|
|||
|
||||
// ANET A6 Firmwae V2.0 defaults: (steps/mm)
|
||||
// Xsteps/mm: +100.0, Ysteps/mm: +100.0, Zsteps/mm: +0400.0, eSteps/mm: +0095.0
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT {100, 100, 400, 95}
|
||||
//#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 400, 95}
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95 }
|
||||
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 }
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
|
@ -736,8 +736,8 @@
|
|||
|
||||
// ANET A6 Firmware V2.0 defaults (Vmax):
|
||||
// Vmax x: 400, Vmax y: 400, Vmax z: 4, Vmax e: 25
|
||||
#define DEFAULT_MAX_FEEDRATE {400, 400, 4, 25}
|
||||
//#define DEFAULT_MAX_FEEDRATE {400, 400, 20, 50}
|
||||
#define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 25 }
|
||||
//#define DEFAULT_MAX_FEEDRATE { 400, 400, 20, 50 }
|
||||
|
||||
|
||||
/**
|
||||
|
@ -869,7 +869,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1641,7 +1641,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -295,9 +295,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -835,7 +835,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1503,7 +1503,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -295,9 +295,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -833,7 +833,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1501,7 +1501,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -834,7 +834,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1502,7 +1502,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -832,7 +832,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1500,7 +1500,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -823,7 +823,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1491,7 +1491,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -618,7 +618,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
#define HOTEND_OFFSET_X {0.0, -33.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
#define HOTEND_OFFSET_X { 0.0, -33.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
#define HOTEND_OFFSET_X {0.0, -33.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
#define HOTEND_OFFSET_X { 0.0, -33.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -810,7 +810,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1478,7 +1478,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -302,9 +302,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -823,7 +823,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -810,7 +810,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1478,7 +1478,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -295,9 +295,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -821,7 +821,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1489,7 +1489,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -832,7 +832,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1500,7 +1500,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1491,7 +1491,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -823,7 +823,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1493,7 +1493,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -303,9 +303,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -841,7 +841,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1509,7 +1509,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -832,7 +832,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1500,7 +1500,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -826,7 +826,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1494,7 +1494,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -826,7 +826,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1494,7 +1494,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -832,7 +832,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1500,7 +1500,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -827,7 +827,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1495,7 +1495,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -832,7 +832,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1500,7 +1500,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -804,7 +804,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1472,7 +1472,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -804,7 +804,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1472,7 +1472,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, -34.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 0.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, -34.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 0.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -814,7 +814,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1481,7 +1481,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -828,7 +828,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
#define Z_SERVO_ANGLES {40,85} // Z Servo Deploy and Stow angles
|
||||
#define Z_SERVO_ANGLES { 40,85 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1496,7 +1496,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -335,9 +335,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -905,7 +905,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1595,7 +1595,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -297,14 +297,14 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
#ifdef ROXYs_TRex
|
||||
#define HOTEND_OFFSET_X {0.0, 0.00} // (mm) for each extruder, offset of the hotend on the X axis
|
||||
#define HOTEND_OFFSET_Y {0.0, 1.25} // (mm) for each extruder, offset of the hotend on the Y axis
|
||||
#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
#define HOTEND_OFFSET_X { 0.0, 0.00 } // (mm) for each extruder, offset of the hotend on the X axis
|
||||
#define HOTEND_OFFSET_Y { 0.0, 1.25 } // (mm) for each extruder, offset of the hotend on the Y axis
|
||||
#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
#endif
|
||||
|
||||
// @section machine
|
||||
|
@ -851,7 +851,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1524,7 +1524,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -618,7 +618,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -298,9 +298,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -838,7 +838,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1515,7 +1515,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -618,7 +618,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -805,7 +805,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1475,7 +1475,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -805,7 +805,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1475,7 +1475,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -805,7 +805,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1474,7 +1474,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -837,7 +837,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1505,7 +1505,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 1 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {10,90} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 10, 90 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -829,7 +829,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1497,7 +1497,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -843,7 +843,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1511,7 +1511,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -842,7 +842,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1510,7 +1510,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
#define HOTEND_OFFSET_X {0.0, 32.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
#define HOTEND_OFFSET_X { 0.0, 32.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 32.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 32.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -826,7 +826,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1494,7 +1494,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -824,7 +824,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1492,7 +1492,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -619,7 +619,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -299,9 +299,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -834,7 +834,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1502,7 +1502,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -824,7 +824,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1492,7 +1492,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -619,7 +619,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -314,9 +314,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -842,7 +842,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1510,7 +1510,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -299,9 +299,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -718,9 +718,9 @@
|
|||
|
||||
// Other common M150 values:
|
||||
// 16T MXL on X and Y
|
||||
// #define DEFAULT_AXIS_STEPS_PER_UNIT {3200/32.512, 3200/32.512, 1600, 103.00}
|
||||
// #define DEFAULT_AXIS_STEPS_PER_UNIT { 3200/32.512, 3200/32.512, 1600, 103.00 }
|
||||
// 16T GT2 on X and Y
|
||||
// #define DEFAULT_AXIS_STEPS_PER_UNIT {100, 100, 1600, 103.00}
|
||||
// #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 1600, 103.00 }
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
|
@ -842,7 +842,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1518,7 +1518,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -821,7 +821,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1489,7 +1489,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -826,7 +826,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1494,7 +1494,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -826,7 +826,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1494,7 +1494,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -295,9 +295,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -823,7 +823,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1491,7 +1491,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -295,9 +295,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -830,7 +830,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1498,7 +1498,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -862,7 +862,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1539,7 +1539,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -297,9 +297,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -820,7 +820,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1488,7 +1488,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -325,9 +325,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -835,7 +835,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1503,7 +1503,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -824,7 +824,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1492,7 +1492,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -824,7 +824,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1492,7 +1492,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -853,7 +853,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1521,7 +1521,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -827,7 +827,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1495,7 +1495,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -316,9 +316,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -873,7 +873,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1546,7 +1546,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1494,7 +1494,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -296,9 +296,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -843,7 +843,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1511,7 +1511,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -833,7 +833,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1501,7 +1501,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
#define HOTEND_OFFSET_X {0.0, -18.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
#define HOTEND_OFFSET_X { 0.0, -18.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -831,7 +831,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1499,7 +1499,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -314,9 +314,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -851,7 +851,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1520,7 +1520,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -627,7 +627,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -313,9 +313,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -841,7 +841,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1509,7 +1509,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -832,7 +832,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1500,7 +1500,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -822,7 +822,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1490,7 +1490,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -309,9 +309,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -958,7 +958,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1678,7 +1678,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -904,7 +904,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1618,7 +1618,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -904,7 +904,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1617,7 +1617,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -904,7 +904,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1617,7 +1617,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -894,7 +894,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1605,7 +1605,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -299,9 +299,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -909,7 +909,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1620,7 +1620,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -894,7 +894,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1605,7 +1605,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -898,7 +898,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1609,7 +1609,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -894,7 +894,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1605,7 +1605,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -894,7 +894,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1607,7 +1607,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -298,9 +298,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -887,7 +887,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1608,7 +1608,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -897,7 +897,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1608,7 +1608,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -299,9 +299,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -835,7 +835,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1504,7 +1504,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -825,7 +825,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1493,7 +1493,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -817,7 +817,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1485,7 +1485,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
|
@ -294,9 +294,9 @@
|
|||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
|
||||
|
||||
// @section machine
|
||||
|
||||
|
@ -827,7 +827,7 @@
|
|||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
|
@ -1495,7 +1495,7 @@
|
|||
|
||||
// Specify positions as { X, Y, Z }
|
||||
#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
|
||||
#define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
|
||||
|
||||
// Circular pattern radius
|
||||
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
|
||||
|
|
|
@ -614,7 +614,7 @@
|
|||
|
||||
// @section machine
|
||||
|
||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||
#define AXIS_RELATIVE_MODES { false, false, false, false }
|
||||
|
||||
// Add a Duplicate option for well-separated conjoined nozzles
|
||||
//#define MULTI_NOZZLE_DUPLICATION
|
||||
|
|
Reference in a new issue