Add MRR_ESPA/_ESPE (ESP32) boards (#16238)

This commit is contained in:
Luc 2019-12-22 01:58:00 +01:00 committed by Scott Lahteine
parent d5bc5547ee
commit a3d88aebed
4 changed files with 261 additions and 0 deletions

View file

@ -322,6 +322,8 @@
// Espressif ESP32 WiFi
//
#define BOARD_ESPRESSIF_ESP32 6000
#define BOARD_MRR_ESPA 6001
#define BOARD_MRR_ESPE 6002
//
// Simulations

View file

@ -0,0 +1,101 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* MRR ESPA pin assignments
* MRR ESPA is a 3D printer control board based on the ESP32 microcontroller.
* Supports 4 stepper drivers, heated bed, single hotend.
*/
#ifndef ARDUINO_ARCH_ESP32
#error "Oops! Select an ESP32 board in 'Tools > Board.'"
#elif EXTRUDERS > 1 || E_STEPPERS > 1
#error "MRR ESPA only supports one E Stepper. Comment out this line to continue."
#elif HOTENDS > 1
#error "MRR ESPA currently supports only one hotend. Comment out this line to continue."
#endif
#define BOARD_INFO_NAME "MRR ESPA"
#define BOARD_WEBSITE_URL "github.com/maplerainresearch/MRR_ESPA"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
//
// Disable I2S stepper stream
//
#ifdef I2S_STEPPER_STREAM
#undef I2S_STEPPER_STREAM
#endif
#define I2S_WS -1
#define I2S_BCK -1
#define I2S_DATA -1
//
// Limit Switches
//
#define X_STOP_PIN 34
#define Y_STOP_PIN 35
#define Z_STOP_PIN 15
//
// Steppers
//
#define X_STEP_PIN 27
#define X_DIR_PIN 26
#define X_ENABLE_PIN 25
//#define X_CS_PIN 21
#define Y_STEP_PIN 33
#define Y_DIR_PIN 32
#define Y_ENABLE_PIN X_ENABLE_PIN
//#define Y_CS_PIN 22
#define Z_STEP_PIN 14
#define Z_DIR_PIN 12
#define Z_ENABLE_PIN X_ENABLE_PIN
//#define Z_CS_PIN 5 // SS_PIN
#define E0_STEP_PIN 16
#define E0_DIR_PIN 17
#define E0_ENABLE_PIN X_ENABLE_PIN
//#define E0_CS_PIN 21
//
// Temperature Sensors
//
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define FAN_PIN 13
#define HEATER_BED_PIN 4
//
// MicroSD card
//
#define MOSI_PIN 23
#define MISO_PIN 19
#define SCK_PIN 18
#define SDSS 5

View file

@ -0,0 +1,154 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* MRR ESPE pin assignments
* MRR ESPE is a 3D printer control board based on the ESP32 microcontroller.
* Supports 5 stepper drivers (using I2S stepper stream), heated bed,
* single hotend, and LCD controller.
*/
#ifndef ARDUINO_ARCH_ESP32
#error "Oops! Select an ESP32 board in 'Tools > Board.'"
#elif EXTRUDERS > 2 || E_STEPPERS > 2
#error "MRR ESPE only supports two E Steppers. Comment out this line to continue."
#elif HOTENDS > 1
#error "MRR ESPE currently supports only one hotend. Comment out this line to continue."
#endif
#define BOARD_INFO_NAME "MRR ESPE"
#define BOARD_WEBSITE_URL "github.com/maplerainresearch/MRR_ESPE"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
//
// Limit Switches
//
#define X_STOP_PIN 35
#define Y_STOP_PIN 32
#define Z_STOP_PIN 33
//
// Enable I2S stepper stream
//
#undef I2S_STEPPER_STREAM
#define I2S_STEPPER_STREAM
#undef LIN_ADVANCE // Currently, I2S stream does not work with linear advance
#define I2S_WS 26
#define I2S_BCK 25
#define I2S_DATA 27
//
// Steppers
//
#define X_STEP_PIN 129
#define X_DIR_PIN 130
#define X_ENABLE_PIN 128
//#define X_CS_PIN 21
#define Y_STEP_PIN 132
#define Y_DIR_PIN 133
#define Y_ENABLE_PIN 131
//#define Y_CS_PIN 22
#define Z_STEP_PIN 135
#define Z_DIR_PIN 136
#define Z_ENABLE_PIN 134
//#define Z_CS_PIN 5 // SS_PIN
#define E0_STEP_PIN 138
#define E0_DIR_PIN 139
#define E0_ENABLE_PIN 137
//#define E0_CS_PIN 21
#define E1_STEP_PIN 141
#define E1_DIR_PIN 142
#define E1_ENABLE_PIN 140
//#define E1_CS_PIN 22
#define Z2_STEP_PIN 141
#define Z2_DIR_PIN 142
#define Z2_ENABLE_PIN 140
//#define Z2_CS_PIN 5
//
// Temperature Sensors
//
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_1_PIN 34 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 145 // 2
#define FAN_PIN 146 // 15
#define HEATER_BED_PIN 144 // 4
#define CONTROLLER_FAN_PIN 147
//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder
//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder
#define FAN1_PIN 149
//
// MicroSD card
//
#define MOSI_PIN 23
#define MISO_PIN 19
#define SCK_PIN 18
#define SDSS 5
//////////////////////////
// LCDs and Controllers //
//////////////////////////
#if HAS_GRAPHICAL_LCD
#define LCD_PINS_RS 13
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 16
#if ENABLED(CR10_STOCKDISPLAY)
#define BEEPER_PIN 151
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BEEPER_PIN 152
//#define LCD_PINS_D5 150
//#define LCD_PINS_D6 151
//#define LCD_PINS_D7 153
#else
#error "Only CR10_STOCKDISPLAY and REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER are currently supported. Comment out this line to continue."
#endif
#define BTN_EN1 0
#define BTN_EN2 12
#define BTN_ENC 14
#endif // HAS_GRAPHICAL_LCD

View file

@ -553,6 +553,10 @@
#elif MB(ESPRESSIF_ESP32)
#include "esp32/pins_ESP32.h" // ESP32 env:esp32
#elif MB(MRR_ESPA)
#include "esp32/pins_MRR_ESPA.h" // ESP32 env:esp32
#elif MB(MRR_ESPE)
#include "esp32/pins_MRR_ESPE.h" // ESP32 env:esp32
//
// Linux Native Debug board