diff --git a/.travis.yml b/.travis.yml
index a433caa8f..b2d927815 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -86,7 +86,7 @@ script:
   #
   # And with a Sled Z Probe
   #
-  - opt_enable Z_PROBE_SLED 
+  - opt_enable Z_PROBE_SLED
   - build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
   #
   # Test a Servo Probe
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 8994f9efa..fbbb21d41 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index 8994f9efa..fbbb21d41 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 5aa7c1c14..aaef371f2 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index 4a9a2a48e..ff9a8b40d 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index 887f53b71..203484653 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index d2d22f69e..f6a9abbce 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -1498,11 +1498,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 8aea23469..007652f86 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index fa4051392..f5adb3718 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -1494,11 +1494,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 8aea23469..007652f86 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index 9d41fa996..82e4ff63d 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index f74a5aa98..fe5add0c6 100644
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -1500,11 +1500,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index c61f2bc74..17719cee0 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 8902742fe..baa7a278f 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -1506,11 +1506,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index cc39c3b7c..21519c30b 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index 974faff1a..c3b0b911a 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -1491,11 +1491,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 25f82a795..c8f092df2 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -1498,11 +1498,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index 076ed1ecb..caa659038 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -1519,11 +1519,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index 189a9bd5d..4ff47fd90 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index 7f33835f3..b0756f791 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index c67fd134a..d6da256f9 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -1486,11 +1486,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index 39bdbd703..22c845e35 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 5bd703485..d9aef183d 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index 4eafc4141..98959a683 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -1505,11 +1505,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index c1cfafc5e..3ab905163 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -1498,11 +1498,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index ff8ea72b8..4850ad7a9 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1499,11 +1499,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index ba34cbe69..8663f5e32 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1499,11 +1499,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index ba34cbe69..8663f5e32 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -1499,11 +1499,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index ba34cbe69..8663f5e32 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -1499,11 +1499,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index 43adeac18..46c4999cc 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -1504,11 +1504,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index f63aa5395..66dd6700f 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -1499,11 +1499,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 5f232f69a..59b861ed4 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -1498,11 +1498,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index 10c56e062..3bc38c745 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index fb11b1fa5..c1e303af3 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -1497,11 +1497,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index 29b720790..ad2f3b894 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -1498,11 +1498,11 @@
 /**
  * NanoDLP Synch support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  *
  */
  //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/src/lcd/ultralcd_impl_DOGM.h b/Marlin/src/lcd/ultralcd_impl_DOGM.h
index b03ebf3b6..bdd0a02a1 100644
--- a/Marlin/src/lcd/ultralcd_impl_DOGM.h
+++ b/Marlin/src/lcd/ultralcd_impl_DOGM.h
@@ -164,7 +164,7 @@
 
 // LCD selection
 #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
-  #ifdef CPU_32_BIT 
+  #ifdef CPU_32_BIT
     U8GLIB_ST7920_128X64_4X u8g(LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS); // Original u8glib device. 2 stripes, SW SPI
   #else
     U8GLIB_ST7920_128X64_4X u8g(LCD_PINS_RS); // 2 stripes, HW SPI (shared with SD card)
diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp
index fd53a671d..b509adec6 100644
--- a/Marlin/src/module/probe.cpp
+++ b/Marlin/src/module/probe.cpp
@@ -596,7 +596,7 @@ float probe_pt(const float &rx, const float &ry, const bool stow, const uint8_t
   }
   else if (!position_is_reachable(nx, ny)) return NAN;        // The given position is in terms of the nozzle
 
-  const float nz = 
+  const float nz =
     #if ENABLED(DELTA)
       // Move below clip height or xy move will be aborted by do_blocking_move_to
       min(current_position[Z_AXIS], delta_clip_start_height)
diff --git a/Marlin/src/pins/pins_BIQU_BQ111_A4.h b/Marlin/src/pins/pins_BIQU_BQ111_A4.h
index bc62dcdc7..5b6fcd89d 100644
--- a/Marlin/src/pins/pins_BIQU_BQ111_A4.h
+++ b/Marlin/src/pins/pins_BIQU_BQ111_A4.h
@@ -95,7 +95,7 @@
  *
  * REPRAP_DISCOUNT_SMART_CONTROLLER is not supported due to the lack of LCD_PINS_D5,
  * LCD_PINS_D6 or LCD_PINS_D7 in the EXP1 connector.
- * 
+ *
  * A remote SD card is not supported as the pins routed to EXP2 are the same as used
  * for the onboard SD card, and a chip select signal is not provided for the remote
  * SD card.