Merge pull request #4445 from thinkyhead/rc_fix_rdfgsc_mega3

Fix for R.D.F.G.S.C. with MEGATRONICS 3 board
This commit is contained in:
Scott Lahteine 2016-07-28 15:55:30 -07:00 committed by GitHub
commit ae1c7bca1b
18 changed files with 107 additions and 202 deletions

View file

@ -86,7 +86,7 @@
#undef BTN_ENC #undef BTN_ENC
#define BTN_EN1 16 #define BTN_EN1 16
#define BTN_EN2 17 #define BTN_EN2 17
#define BTN_ENC 23 //the click #define BTN_ENC 23
#else #else

View file

@ -84,8 +84,4 @@
#define BTN_EN2 -1 #define BTN_EN2 -1
#define BTN_ENC -1 #define BTN_ENC -1
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
// Cheaptronic v1.0 doesn't use this // Cheaptronic v1.0 doesn't use this

View file

@ -87,11 +87,7 @@
#define BTN_EN1 14 #define BTN_EN1 14
#define BTN_EN2 39 #define BTN_EN2 39
#define BTN_ENC 15 //the click #define BTN_ENC 15
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#endif // RA_CONTROL_PANEL #endif // RA_CONTROL_PANEL

View file

@ -38,9 +38,6 @@
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SD_DETECT_PIN 6 #define SD_DETECT_PIN 6
#endif // NEWPANEL && ULTRA_LCD #endif // NEWPANEL && ULTRA_LCD

View file

@ -86,5 +86,5 @@
//buttons are directly attached //buttons are directly attached
#define BTN_EN1 11 #define BTN_EN1 11
#define BTN_EN2 10 #define BTN_EN2 10
#define BTN_ENC 12 //the click #define BTN_ENC 12

View file

@ -113,11 +113,11 @@
//#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270 //#define LCD_SCREEN_ROT_270
//The encoder and click button
#define BTN_EN1 48 #define BTN_EN1 48
#define BTN_EN2 11 #define BTN_EN2 11
#define BTN_ENC 10 //the click switch #define BTN_ENC 10
//not connected to a pin
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#endif //Minipanel #endif // MINIPANEL

View file

@ -92,10 +92,6 @@
#define BTN_EN2 64 #define BTN_EN2 64
#define BTN_ENC 43 #define BTN_ENC 43
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SD_DETECT_PIN -1 // RAMPS doesn't use this #define SD_DETECT_PIN -1 // RAMPS doesn't use this
#endif // ULTRA_LCD && NEWPANEL #endif // ULTRA_LCD && NEWPANEL

View file

@ -101,9 +101,4 @@
// Buttons are directly attached using keypad // Buttons are directly attached using keypad
#define BTN_EN1 61 #define BTN_EN1 61
#define BTN_EN2 59 #define BTN_EN2 59
#define BTN_ENC 43 //the click #define BTN_ENC 43
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0

View file

@ -28,7 +28,14 @@
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif #endif
#define BOARD_NAME "Megatronics v3.0" #define MEGATRONICS_31
#if ENABLED(MEGATRONICS_31)
#define BOARD_NAME "Megatronics v3.1"
#else
#define BOARD_NAME "Megatronics v3.0"
#endif
#define LARGE_FLASH true #define LARGE_FLASH true
#if ENABLED(Z_PROBE_SLED) #if ENABLED(Z_PROBE_SLED)
@ -36,28 +43,28 @@
#endif #endif
// Servo support // Servo support
#define SERVO0_PIN 46 //AUX3-6 #define SERVO0_PIN 46 // AUX3-6
#define SERVO1_PIN 47 //AUX3-5 #define SERVO1_PIN 47 // AUX3-5
#define SERVO2_PIN 48 //AUX3-4 #define SERVO2_PIN 48 // AUX3-4
#define SERVO3_PIN 49 //AUX3-3 #define SERVO3_PIN 49 // AUX3-3
#define X_STEP_PIN 58 #define X_STEP_PIN 58
#define X_DIR_PIN 57 #define X_DIR_PIN 57
#define X_ENABLE_PIN 59 #define X_ENABLE_PIN 59
#define X_MIN_PIN 37 #define X_MIN_PIN 37
#define X_MAX_PIN 40 // put to -1 to disable #define X_MAX_PIN 40
#define Y_STEP_PIN 5 #define Y_STEP_PIN 5
#define Y_DIR_PIN 17 #define Y_DIR_PIN 17
#define Y_ENABLE_PIN 4 #define Y_ENABLE_PIN 4
#define Y_MIN_PIN 41 #define Y_MIN_PIN 41
#define Y_MAX_PIN 38 // put to -1 to disable #define Y_MAX_PIN 38
#define Z_STEP_PIN 16 #define Z_STEP_PIN 16
#define Z_DIR_PIN 11 #define Z_DIR_PIN 11
#define Z_ENABLE_PIN 3 #define Z_ENABLE_PIN 3
#define Z_MIN_PIN 18 #define Z_MIN_PIN 18
#define Z_MAX_PIN 19 // put to -1 to disable #define Z_MAX_PIN 19
#define E0_STEP_PIN 28 #define E0_STEP_PIN 28
#define E0_DIR_PIN 27 #define E0_DIR_PIN 27
@ -104,40 +111,37 @@
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // ANALOG NUMBERING
#endif #endif
/**
* Controllers and LCDs
*/
#define BEEPER_PIN 61 #define BEEPER_PIN 61
#if ENABLED(DOGLCD)
#if ENABLED(U8GLIB_ST7920)
#define LCD_PINS_RS 56 //CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 //SID (MOSI)
#define LCD_PINS_D4 52 //SCK (CLK) clock
#define SD_DETECT_PIN 35
#endif
#else
#define LCD_PINS_RS 32
#define LCD_PINS_ENABLE 31
#define LCD_PINS_D4 14
#define LCD_PINS_D5 30
#define LCD_PINS_D6 39
#define LCD_PINS_D7 15
#define SHIFT_CLK 43
#define SHIFT_LD 35
#define SHIFT_OUT 34
#define SHIFT_EN 44
#define SD_DETECT_PIN 56 // Megatronics v3.1 only
#endif
// Buttons are directly attached using keypad
#define BTN_EN1 44 #define BTN_EN1 44
#define BTN_EN2 45 #define BTN_EN2 45
#define BTN_ENC 33 #define BTN_ENC 33
#define BLEN_C 2 #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define BLEN_B 1 #define LCD_PINS_RS 56 // CS chip select / SS chip slave select
#define BLEN_A 0 #define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock
#define SD_DETECT_PIN 35
#else
#define LCD_PINS_RS 32
#define LCD_PINS_ENABLE 31
#define LCD_PINS_D4 14
#define LCD_PINS_D5 30
#define LCD_PINS_D6 39
#define LCD_PINS_D7 15
#define SHIFT_CLK 43
#define SHIFT_LD 35
#define SHIFT_OUT 34
#define SHIFT_EN 44
#if ENABLED(MEGATRONICS_31)
#define SD_DETECT_PIN 56
#else
#define SD_DETECT_PIN -1
#endif
#endif

View file

@ -74,40 +74,36 @@
#define HEATER_1_PIN 8 // EXTRUDER 2 #define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_BED_PIN 3 // BED #define HEATER_BED_PIN 3 // BED
/**
* Controllers and LCDs
*/
#define BEEPER_PIN -1 #define BEEPER_PIN -1
#if ENABLED(DOGLCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#if ENABLED(U8GLIB_ST7920) #define LCD_PINS_RS 15 // CS chip select /SS chip slave select
#define LCD_PINS_RS 15 //CS chip select /SS chip slave select #define LCD_PINS_ENABLE 11 // SID (MOSI)
#define LCD_PINS_ENABLE 11 //SID (MOSI) #define LCD_PINS_D4 10 // SCK (CLK) clock
#define LCD_PINS_D4 10 //SCK (CLK) clock
#define BTN_EN1 18 #define BTN_EN1 18
#define BTN_EN2 17 #define BTN_EN2 17
#define BTN_ENC 25 #define BTN_ENC 25
#define SD_DETECT_PIN 30 #define SD_DETECT_PIN 30
#endif
#else #else
#define LCD_PINS_RS -1 #define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1 #define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1 #define LCD_PINS_D4 -1
#define LCD_PINS_D5 -1 #define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1 #define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1 #define LCD_PINS_D7 -1
// Buttons are directly attached using keypad // Buttons are directly attached using keypad
#define BTN_EN1 -1 #define BTN_EN1 -1
#define BTN_EN2 -1 #define BTN_EN2 -1
#define BTN_ENC -1 #define BTN_ENC -1
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SD_DETECT_PIN -1 // Minitronics doesn't use this #define SD_DETECT_PIN -1 // Minitronics doesn't use this
#endif #endif

View file

@ -132,7 +132,7 @@
//The encoder and click button (FastIO Pins) //The encoder and click button (FastIO Pins)
#define BTN_EN1 26 #define BTN_EN1 26
#define BTN_EN2 27 #define BTN_EN2 27
#define BTN_ENC 47 //the click switch #define BTN_ENC 47
#define SDSS 45 #define SDSS 45
#define SD_DETECT_PIN -1 // FastIO (Manual says 72 I'm not certain cause I can't test) #define SD_DETECT_PIN -1 // FastIO (Manual says 72 I'm not certain cause I can't test)

View file

@ -113,10 +113,6 @@
#define BTN_EN2 17 #define BTN_EN2 17
#define BTN_ENC 18//the click #define BTN_ENC 18//the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1
//encoder rotation values //encoder rotation values
@ -136,7 +132,7 @@
//The encoder and click button (FastIO Pins) //The encoder and click button (FastIO Pins)
#define BTN_EN1 26 #define BTN_EN1 26
#define BTN_EN2 27 #define BTN_EN2 27
#define BTN_ENC 47 //the click switch #define BTN_ENC 47
#define SDSS 45 #define SDSS 45
#define SD_DETECT_PIN -1 // FastIO (Manual says 72 I'm not certain cause I can't test) #define SD_DETECT_PIN -1 // FastIO (Manual says 72 I'm not certain cause I can't test)

View file

@ -127,11 +127,7 @@
//buttons are directly attached using AUX-2 //buttons are directly attached using AUX-2
#define BTN_EN1 76 #define BTN_EN1 76
#define BTN_EN2 77 #define BTN_EN2 77
#define BTN_ENC 78 //the click #define BTN_ENC 78
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SD_DETECT_PIN 81 // Ramps doesn't use this #define SD_DETECT_PIN 81 // Ramps doesn't use this
@ -154,17 +150,6 @@
#define LCD_PINS_D6 27 #define LCD_PINS_D6 27
#define LCD_PINS_D7 29 #define LCD_PINS_D7 29
//bits in the shift register that carry the buttons for:
// left up center down right red
#define BL_LE 7
#define BL_UP 6
#define BL_MI 5
#define BL_DW 4
#define BL_RI 3
#define BL_ST 2
#define BLEN_B 1
#define BLEN_A 0
#endif // !NEWPANEL #endif // !NEWPANEL
#endif // ULTRA_LCD #endif // ULTRA_LCD
@ -179,7 +164,7 @@
//The encoder and click button //The encoder and click button
#define BTN_EN1 85 #define BTN_EN1 85
#define BTN_EN2 84 #define BTN_EN2 84
#define BTN_ENC 83 //the click switch #define BTN_ENC 83
#define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board

View file

@ -256,7 +256,7 @@
//The encoder and click button //The encoder and click button
#define BTN_EN1 40 #define BTN_EN1 40
#define BTN_EN2 63 #define BTN_EN2 63
#define BTN_ENC 59 //the click switch #define BTN_ENC 59
//not connected to a pin //not connected to a pin
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49

View file

@ -89,10 +89,6 @@
//buttons are directly attached //buttons are directly attached
#define BTN_EN1 40 #define BTN_EN1 40
#define BTN_EN2 41 #define BTN_EN2 41
#define BTN_ENC 19 //the click #define BTN_ENC 19
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SD_DETECT_PIN 39 #define SD_DETECT_PIN 39

View file

@ -58,7 +58,6 @@
void bootscreen(); void bootscreen();
#endif #endif
#define LCD_MESSAGEPGM(x) lcd_setstatuspgm(PSTR(x)) #define LCD_MESSAGEPGM(x) lcd_setstatuspgm(PSTR(x))
#define LCD_ALERTMESSAGEPGM(x) lcd_setalertstatuspgm(PSTR(x)) #define LCD_ALERTMESSAGEPGM(x) lcd_setalertstatuspgm(PSTR(x))
@ -93,7 +92,20 @@
bool lcd_blink(); bool lcd_blink();
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(ULTIPANEL)
#define BLEN_A 0
#define BLEN_B 1
// Encoder click is directly connected
#if BUTTON_EXISTS(ENC)
#define BLEN_C 2
#define EN_C (_BV(BLEN_C))
#endif
#define EN_A (_BV(BLEN_A))
#define EN_B (_BV(BLEN_B))
#define EN_C (_BV(BLEN_C))
#endif
#if ENABLED(REPRAPWORLD_KEYPAD) // is also ULTIPANEL and NEWPANEL
#define REPRAPWORLD_BTN_OFFSET 0 // bit offset into buttons for shift register values #define REPRAPWORLD_BTN_OFFSET 0 // bit offset into buttons for shift register values
@ -135,35 +147,10 @@
EN_REPRAPWORLD_KEYPAD_LEFT) \ EN_REPRAPWORLD_KEYPAD_LEFT) \
) )
#endif // REPRAPWORLD_KEYPAD #define LCD_CLICKED ((buttons & EN_C) || (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_F1))
#elif ENABLED(NEWPANEL)
#if ENABLED(NEWPANEL) #define LCD_CLICKED (buttons & EN_C)
#endif
#define EN_C (_BV(BLEN_C))
#define EN_B (_BV(BLEN_B))
#define EN_A (_BV(BLEN_A))
#if ENABLED(REPRAPWORLD_KEYPAD)
#define LCD_CLICKED ((buttons&EN_C) || (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_F1))
#else
#define LCD_CLICKED (buttons&EN_C)
#endif
#else //!NEWPANEL
//atomic, do not change
#define B_LE (_BV(BL_LE))
#define B_UP (_BV(BL_UP))
#define B_MI (_BV(BL_MI))
#define B_DW (_BV(BL_DW))
#define B_RI (_BV(BL_RI))
#define B_ST (_BV(BL_ST))
#define EN_B (_BV(BLEN_B))
#define EN_A (_BV(BLEN_A))
#define LCD_CLICKED ((buttons&B_MI)||(buttons&B_ST))
#endif //!NEWPANEL
#else //no LCD #else //no LCD
FORCE_INLINE void lcd_update() {} FORCE_INLINE void lcd_update() {}

View file

@ -42,20 +42,9 @@
* Implementation of the LCD display routines for a DOGM128 graphic display. * Implementation of the LCD display routines for a DOGM128 graphic display.
* These are common LCD 128x64 pixel graphic displays. * These are common LCD 128x64 pixel graphic displays.
*/ */
#if ENABLED(ULTIPANEL)
#define BLEN_A 0
#define BLEN_B 1
#define BLEN_C 2
#define EN_A (_BV(BLEN_A))
#define EN_B (_BV(BLEN_B))
#define EN_C (_BV(BLEN_C))
#define LCD_CLICKED (buttons&EN_C)
#endif
#include "dogm_bitmaps.h"
#include "ultralcd.h" #include "ultralcd.h"
#include "ultralcd_st7920_u8glib_rrd.h" #include "ultralcd_st7920_u8glib_rrd.h"
#include "dogm_bitmaps.h"
#include "duration_t.h" #include "duration_t.h"
#include <U8glib.h> #include <U8glib.h>

View file

@ -39,18 +39,6 @@ extern volatile uint8_t buttons; //an extended version of the last checked butt
// via a shift/i2c register. // via a shift/i2c register.
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
// All UltiPanels might have an encoder - so this is always be mapped onto first two bits
#define BLEN_B 1
#define BLEN_A 0
#define EN_B (_BV(BLEN_B)) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
#define EN_A (_BV(BLEN_A))
#if BUTTON_EXISTS(ENC)
// encoder click is directly connected
#define BLEN_C 2
#define EN_C (_BV(BLEN_C))
#endif
// //
// Setup other button mappings of each panel // Setup other button mappings of each panel
@ -80,51 +68,35 @@ extern volatile uint8_t buttons; //an extended version of the last checked butt
#elif ENABLED(LCD_I2C_PANELOLU2) #elif ENABLED(LCD_I2C_PANELOLU2)
#if BUTTON_EXISTS(ENC) #if !BUTTON_EXISTS(ENC) // Use I2C if not directly connected to a pin
#undef LCD_CLICKED
#define LCD_CLICKED (buttons&EN_C)
#else // Read through I2C if not directly connected to a pin
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C) #define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
#define B_MI (PANELOLU2_ENCODER_C<<B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later #define B_MI (PANELOLU2_ENCODER_C<<B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later
#undef LCD_CLICKED #undef LCD_CLICKED
#define LCD_CLICKED (buttons&B_MI) #define LCD_CLICKED (buttons & B_MI)
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update // I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
#define LCD_HAS_SLOW_BUTTONS #define LCD_HAS_SLOW_BUTTONS
#endif #endif
#elif ENABLED(REPRAPWORLD_KEYPAD) #elif DISABLED(NEWPANEL) // old style ULTIPANEL
// Shift register bits correspond to buttons:
// REPRAPWORLD_KEYPAD defined in ultralcd.h #define BL_LE 7 // Left
#define BL_UP 6 // Up
#elif ENABLED(NEWPANEL) #define BL_MI 5 // Middle
#define LCD_CLICKED (buttons&EN_C) #define BL_DW 4 // Down
#define BL_RI 3 // Right
#else // old style ULTIPANEL #define BL_ST 2 // Red Button
//bits in the shift register that carry the buttons for:
// left up center down right red(stop)
#define BL_LE 7
#define BL_UP 6
#define BL_MI 5
#define BL_DW 4
#define BL_RI 3
#define BL_ST 2
//automatic, do not change
#define B_LE (_BV(BL_LE)) #define B_LE (_BV(BL_LE))
#define B_UP (_BV(BL_UP)) #define B_UP (_BV(BL_UP))
#define B_MI (_BV(BL_MI)) #define B_MI (_BV(BL_MI))
#define B_DW (_BV(BL_DW)) #define B_DW (_BV(BL_DW))
#define B_RI (_BV(BL_RI)) #define B_RI (_BV(BL_RI))
#define B_ST (_BV(BL_ST)) #define B_ST (_BV(BL_ST))
#define LCD_CLICKED ((buttons & B_MI) || (buttons & B_ST))
#define LCD_CLICKED (buttons&(B_MI|B_ST))
#endif #endif
#endif //ULTIPANEL #endif //ULTIPANEL