BigTreeTech SKR Mini v1.1 (#14041)

This commit is contained in:
yangwenxiong 2019-06-11 10:10:51 +08:00 committed by Scott Lahteine
parent f30b89953d
commit b0a4ea79b8
6 changed files with 185 additions and 0 deletions

View file

@ -245,6 +245,7 @@
#define BOARD_GTM32_PRO_VB 1805 // STM32f103VET6 controller #define BOARD_GTM32_PRO_VB 1805 // STM32f103VET6 controller
#define BOARD_MORPHEUS 1806 // STM32F103C8/STM32F103CB Libmaple based stm32f1 controller #define BOARD_MORPHEUS 1806 // STM32F103C8/STM32F103CB Libmaple based stm32f1 controller
#define BOARD_MKS_ROBIN 1808 // MKS Robin / STM32F103ZET6 #define BOARD_MKS_ROBIN 1808 // MKS Robin / STM32F103ZET6
#define BOARD_BIGTREE_SKR_MINI_V1_1 1814 // STM32F103RC
// //
// STM32 ARM Cortex-M4F // STM32 ARM Cortex-M4F

View file

@ -414,6 +414,8 @@
#include "pins_STM32F1R.h" // STM32F1 env:STM32F1 #include "pins_STM32F1R.h" // STM32F1 env:STM32F1
#elif MB(STM3R_MINI) #elif MB(STM3R_MINI)
#include "pins_STM3R_MINI.h" // STM32F1 env:STM32F1 #include "pins_STM3R_MINI.h" // STM32F1 env:STM32F1
#elif MB(BIGTREE_SKR_MINI_V1_1)
#include "pins_BIGTREE_SKR_MINI_V1_1.h" // STM32F1 env:BIGTREE_SKR_MINI
#elif MB(MALYAN_M200) #elif MB(MALYAN_M200)
#include "pins_MALYAN_M200.h" // STM32F1 env:malyanm200 #include "pins_MALYAN_M200.h" // STM32F1 env:malyanm200
#elif MB(CHITU3D) #elif MB(CHITU3D)

View file

@ -0,0 +1,134 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef TARGET_STM32F1
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "BIGTREE SKR mini V1.1"
#endif
// Ignore temp readings during develpment.
//#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
//
// Limit Switches
//
#define X_MIN_PIN PC2
#define X_MAX_PIN PA2
#define Y_MIN_PIN PC1
#define Y_MAX_PIN PA1
#define Z_MIN_PIN PC0
#define Z_MAX_PIN PC3
//
// Steppers
//
/**
* TODO: Currently using same Enable pin for all steppers.
*/
#define X_STEP_PIN PC6
#define X_DIR_PIN PC7
#define X_ENABLE_PIN PB15
#define Y_STEP_PIN PB13
#define Y_DIR_PIN PB14
#define Y_ENABLE_PIN PB12
#define Z_STEP_PIN PB10
#define Z_DIR_PIN PB11
#define Z_ENABLE_PIN PB2
#define E0_STEP_PIN PC5
#define E0_DIR_PIN PB0
#define E0_ENABLE_PIN PC4
#if ENABLED(TMC_USE_SW_SPI)
#define TMC_SW_SCK PB3
#define TMC_SW_MISO PB4
#define TMC_SW_MOSI PB5
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN PA8
#define FAN_PIN PC8
#define HEATER_BED_PIN PC9
//
// Temperature Sensors
//
#define TEMP_BED_PIN PB1 // Analog Input
#define TEMP_0_PIN PA0 // Analog Input
//
// LCD Pins
//
/**
* _____ _____
* NC | · · | GND 5V | · · | GND
* RESET | · · | 1.31(SD_DETECT) (LCD_D7) 1.23 | · · | 1.22 (LCD_D6)
* (MOSI)0.18 | · · | 3.25(BTN_EN2) (LCD_D5) 1.21 | · · | 1.20 (LCD_D4)
* (SD_SS)0.16 | · · | 3.26(BTN_EN1) (LCD_RS) 1.19 | · · | 1.18 (LCD_EN)
* (SCK)0.15 | · · | 0.17(MISO) (BTN_ENC) 0.28 | · · | 1.30 (BEEPER)
*
* EXP2 EXP1
*/
#if ENABLED(ULTRA_LCD)
#define BEEPER_PIN PC10
#define BTN_ENC PC11
#define LCD_PINS_RS PC12
#define BTN_EN1 PD2
#define BTN_EN2 PB8
#define LCD_PINS_ENABLE PB6
#define LCD_PINS_D4 PC13
#if ENABLED(ULTIPANEL)
#define LCD_PINS_D5 PB7
#define LCD_PINS_D6 PC15
#define LCD_PINS_D7 PC14
#endif
#endif // ULTRA_LCD
//
// SD Card
//
// Marlin uses the SD drive attached to the LCD
//#define STM32_SD_LCD
#ifdef STM32_SD_LCD
#define SD_DETECT_PIN PB9
#define ENABLE_SPI3
#else
#define SD_DETECT_PIN PA3
#endif

View file

@ -0,0 +1,14 @@
MEMORY
{
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40
rom (rx) : ORIGIN = 0x08007000, LENGTH = 256K - 28K
}
/* Provide memory region aliases for common.inc */
REGION_ALIAS("REGION_TEXT", rom);
REGION_ALIAS("REGION_DATA", ram);
REGION_ALIAS("REGION_BSS", ram);
REGION_ALIAS("REGION_RODATA", rom);
/* Let common.inc handle the real work. */
INCLUDE common.inc

View file

@ -0,0 +1,8 @@
Import("env")
# Relocate firmware from 0x08000000 to 0x08007000
for define in env['CPPDEFINES']:
if define[0] == "VECT_TAB_ADDR":
env['CPPDEFINES'].remove(define)
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08007000"))
env.Replace(LDSCRIPT_PATH="buildroot/share/PlatformIO/ldscripts/STM32F1_SKR_MINI.ld")

View file

@ -272,6 +272,32 @@ lib_ldf_mode = 1
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1> src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
monitor_speed = 250000 monitor_speed = 250000
#
# BIGTREE_SKR_MINI
#
[env:BIGTREE_SKR_MINI]
platform = ststm32
framework = arduino
board = genericSTM32F103RC
extra_scripts = buildroot/share/PlatformIO/scripts/STM32F1_SKR_MINI.py
build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
${common.build_flags}
-g
lib_deps = ${common.lib_deps}
lib_ignore = U8glib-HAL
c1921b4
libf3c
lib066
Adafruit NeoPixel_ID28
Adafruit NeoPixel
libf3e
TMC26XStepper
lib_ldf_mode = 1
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
monitor_speed = 115200
upload_protocol = stlink
debug_tool = stlink
# #
# STM32F4 # STM32F4
# #