diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 69d26a539..7e894f51f 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -2055,85 +2055,6 @@ static void clean_up_after_endstop_or_probe_move() { #if ENABLED(AUTO_BED_LEVELING_FEATURE) - #if ENABLED(AUTO_BED_LEVELING_LINEAR) - - /** - * Get the stepper positions, apply the rotation matrix - * using the home XY and Z0 position as the fulcrum. - */ - vector_3 untilted_stepper_position() { - get_cartesian_from_steppers(); - - vector_3 pos = vector_3( - cartes[X_AXIS] - X_TILT_FULCRUM, - cartes[Y_AXIS] - Y_TILT_FULCRUM, - cartes[Z_AXIS] - ); - - matrix_3x3 inverse = matrix_3x3::transpose(planner.bed_level_matrix); - - //pos.debug("untilted_stepper_position offset"); - //bed_level_matrix.debug("untilted_stepper_position"); - //inverse.debug("in untilted_stepper_position"); - - pos.apply_rotation(inverse); - - pos.x = LOGICAL_X_POSITION(pos.x + X_TILT_FULCRUM); - pos.y = LOGICAL_Y_POSITION(pos.y + Y_TILT_FULCRUM); - pos.z = LOGICAL_Z_POSITION(pos.z); - - //pos.debug("after rotation and reorientation"); - - return pos; - } - - #elif ENABLED(AUTO_BED_LEVELING_NONLINEAR) - - /** - * All DELTA leveling in the Marlin uses NONLINEAR_BED_LEVELING - */ - static void extrapolate_one_point(uint8_t x, uint8_t y, int xdir, int ydir) { - if (bed_level_grid[x][y]) return; // Don't overwrite good values. - float a = 2 * bed_level_grid[x + xdir][y] - bed_level_grid[x + xdir * 2][y], // Left to right. - b = 2 * bed_level_grid[x][y + ydir] - bed_level_grid[x][y + ydir * 2], // Front to back. - c = 2 * bed_level_grid[x + xdir][y + ydir] - bed_level_grid[x + xdir * 2][y + ydir * 2]; // Diagonal. - // Median is robust (ignores outliers). - bed_level_grid[x][y] = (a < b) ? ((b < c) ? b : (c < a) ? a : c) - : ((c < b) ? b : (a < c) ? a : c); - } - - /** - * Fill in the unprobed points (corners of circular print surface) - * using linear extrapolation, away from the center. - */ - static void extrapolate_unprobed_bed_level() { - uint8_t half = (AUTO_BED_LEVELING_GRID_POINTS - 1) / 2; - for (uint8_t y = 0; y <= half; y++) { - for (uint8_t x = 0; x <= half; x++) { - if (x + y < 3) continue; - extrapolate_one_point(half - x, half - y, x > 1 ? +1 : 0, y > 1 ? +1 : 0); - extrapolate_one_point(half + x, half - y, x > 1 ? -1 : 0, y > 1 ? +1 : 0); - extrapolate_one_point(half - x, half + y, x > 1 ? +1 : 0, y > 1 ? -1 : 0); - extrapolate_one_point(half + x, half + y, x > 1 ? -1 : 0, y > 1 ? -1 : 0); - } - } - } - - /** - * Print calibration results for plotting or manual frame adjustment. - */ - static void print_bed_level() { - for (uint8_t y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) { - for (uint8_t x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) { - SERIAL_PROTOCOL_F(bed_level_grid[x][y], 2); - SERIAL_PROTOCOLCHAR(' '); - } - SERIAL_EOL; - } - } - - #endif // DELTA - /** * Reset calibration results to zero. */ @@ -2151,6 +2072,85 @@ static void clean_up_after_endstop_or_probe_move() { #endif // AUTO_BED_LEVELING_FEATURE +#if ENABLED(AUTO_BED_LEVELING_LINEAR) + + /** + * Get the stepper positions, apply the rotation matrix + * using the home XY and Z0 position as the fulcrum. + */ + vector_3 untilted_stepper_position() { + get_cartesian_from_steppers(); + + vector_3 pos = vector_3( + cartes[X_AXIS] - X_TILT_FULCRUM, + cartes[Y_AXIS] - Y_TILT_FULCRUM, + cartes[Z_AXIS] + ); + + matrix_3x3 inverse = matrix_3x3::transpose(planner.bed_level_matrix); + + //pos.debug("untilted_stepper_position offset"); + //bed_level_matrix.debug("untilted_stepper_position"); + //inverse.debug("in untilted_stepper_position"); + + pos.apply_rotation(inverse); + + pos.x = LOGICAL_X_POSITION(pos.x + X_TILT_FULCRUM); + pos.y = LOGICAL_Y_POSITION(pos.y + Y_TILT_FULCRUM); + pos.z = LOGICAL_Z_POSITION(pos.z); + + //pos.debug("after rotation and reorientation"); + + return pos; + } + +#elif ENABLED(AUTO_BED_LEVELING_NONLINEAR) + + /** + * All DELTA leveling in the Marlin uses NONLINEAR_BED_LEVELING + */ + static void extrapolate_one_point(uint8_t x, uint8_t y, int xdir, int ydir) { + if (bed_level_grid[x][y]) return; // Don't overwrite good values. + float a = 2 * bed_level_grid[x + xdir][y] - bed_level_grid[x + xdir * 2][y], // Left to right. + b = 2 * bed_level_grid[x][y + ydir] - bed_level_grid[x][y + ydir * 2], // Front to back. + c = 2 * bed_level_grid[x + xdir][y + ydir] - bed_level_grid[x + xdir * 2][y + ydir * 2]; // Diagonal. + // Median is robust (ignores outliers). + bed_level_grid[x][y] = (a < b) ? ((b < c) ? b : (c < a) ? a : c) + : ((c < b) ? b : (a < c) ? a : c); + } + + /** + * Fill in the unprobed points (corners of circular print surface) + * using linear extrapolation, away from the center. + */ + static void extrapolate_unprobed_bed_level() { + uint8_t half = (AUTO_BED_LEVELING_GRID_POINTS - 1) / 2; + for (uint8_t y = 0; y <= half; y++) { + for (uint8_t x = 0; x <= half; x++) { + if (x + y < 3) continue; + extrapolate_one_point(half - x, half - y, x > 1 ? +1 : 0, y > 1 ? +1 : 0); + extrapolate_one_point(half + x, half - y, x > 1 ? -1 : 0, y > 1 ? +1 : 0); + extrapolate_one_point(half - x, half + y, x > 1 ? +1 : 0, y > 1 ? -1 : 0); + extrapolate_one_point(half + x, half + y, x > 1 ? -1 : 0, y > 1 ? -1 : 0); + } + } + } + + /** + * Print calibration results for plotting or manual frame adjustment. + */ + static void print_bed_level() { + for (uint8_t y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) { + for (uint8_t x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) { + SERIAL_PROTOCOL_F(bed_level_grid[x][y], 2); + SERIAL_PROTOCOLCHAR(' '); + } + SERIAL_EOL; + } + } + +#endif // AUTO_BED_LEVELING_NONLINEAR + /** * Home an individual axis */ @@ -2441,6 +2441,10 @@ bool position_is_reachable(float target[XYZ]) { #endif } +/************************************************** + ***************** GCode Handlers ***************** + **************************************************/ + /** * G0, G1: Coordinated movement of X Y Z E axes */ @@ -2589,16 +2593,12 @@ inline void gcode_G4() { /** * G20: Set input mode to inches */ - inline void gcode_G20() { - set_input_linear_units(LINEARUNIT_INCH); - } + inline void gcode_G20() { set_input_linear_units(LINEARUNIT_INCH); } /** * G21: Set input mode to millimeters */ - inline void gcode_G21() { - set_input_linear_units(LINEARUNIT_MM); - } + inline void gcode_G21() { set_input_linear_units(LINEARUNIT_MM); } #endif #if ENABLED(NOZZLE_PARK_FEATURE) @@ -3431,12 +3431,12 @@ inline void gcode_G28() { #endif // AUTO_BED_LEVELING_LINEAR int probePointCounter = 0; - bool zig = auto_bed_leveling_grid_points & 1; //always end at [RIGHT_PROBE_BED_POSITION, BACK_PROBE_BED_POSITION] + uint8_t zig = auto_bed_leveling_grid_points & 1; //always end at [RIGHT_PROBE_BED_POSITION, BACK_PROBE_BED_POSITION] - for (int yCount = 0; yCount < auto_bed_leveling_grid_points; yCount++) { + for (uint8_t yCount = 0; yCount < auto_bed_leveling_grid_points; yCount++) { float yBase = front_probe_bed_position + yGridSpacing * yCount, yProbe = floor(yBase + (yBase < 0 ? 0 : 0.5)); - int xStart, xStop, xInc; + int8_t xStart, xStop, xInc; if (zig) { xStart = 0; @@ -3451,7 +3451,7 @@ inline void gcode_G28() { zig = !zig; - for (int xCount = xStart; xCount != xStop; xCount += xInc) { + for (uint8_t xCount = xStart; xCount != xStop; xCount += xInc) { float xBase = left_probe_bed_position + xGridSpacing * xCount, xProbe = floor(xBase + (xBase < 0 ? 0 : 0.5)); @@ -3514,7 +3514,7 @@ inline void gcode_G28() { planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal); } - #endif // !AUTO_BED_LEVELING_GRID + #endif // AUTO_BED_LEVELING_3POINT // Raise to _Z_PROBE_DEPLOY_HEIGHT. Stow the probe. if (STOW_PROBE()) return; @@ -3527,74 +3527,96 @@ inline void gcode_G28() { #endif // Calculate leveling, print reports, correct the position - #if ENABLED(AUTO_BED_LEVELING_GRID) - #if ENABLED(AUTO_BED_LEVELING_NONLINEAR) + #if ENABLED(AUTO_BED_LEVELING_NONLINEAR) - if (!dryrun) extrapolate_unprobed_bed_level(); - print_bed_level(); + if (!dryrun) extrapolate_unprobed_bed_level(); + print_bed_level(); - #elif ENABLED(AUTO_BED_LEVELING_LINEAR) + #elif ENABLED(AUTO_BED_LEVELING_LINEAR) - // solve lsq problem - double plane_equation_coefficients[3]; - qr_solve(plane_equation_coefficients, abl2, 3, eqnAMatrix, eqnBVector); + // solve lsq problem + double plane_equation_coefficients[3]; + qr_solve(plane_equation_coefficients, abl2, 3, eqnAMatrix, eqnBVector); - mean /= abl2; + mean /= abl2; - if (verbose_level) { - SERIAL_PROTOCOLPGM("Eqn coefficients: a: "); - SERIAL_PROTOCOL_F(plane_equation_coefficients[0], 8); - SERIAL_PROTOCOLPGM(" b: "); - SERIAL_PROTOCOL_F(plane_equation_coefficients[1], 8); - SERIAL_PROTOCOLPGM(" d: "); - SERIAL_PROTOCOL_F(plane_equation_coefficients[2], 8); + if (verbose_level) { + SERIAL_PROTOCOLPGM("Eqn coefficients: a: "); + SERIAL_PROTOCOL_F(plane_equation_coefficients[0], 8); + SERIAL_PROTOCOLPGM(" b: "); + SERIAL_PROTOCOL_F(plane_equation_coefficients[1], 8); + SERIAL_PROTOCOLPGM(" d: "); + SERIAL_PROTOCOL_F(plane_equation_coefficients[2], 8); + SERIAL_EOL; + if (verbose_level > 2) { + SERIAL_PROTOCOLPGM("Mean of sampled points: "); + SERIAL_PROTOCOL_F(mean, 8); SERIAL_EOL; - if (verbose_level > 2) { - SERIAL_PROTOCOLPGM("Mean of sampled points: "); - SERIAL_PROTOCOL_F(mean, 8); - SERIAL_EOL; - } } + } - // Create the matrix but don't correct the position yet - if (!dryrun) { - planner.bed_level_matrix = matrix_3x3::create_look_at( - vector_3(-plane_equation_coefficients[0], -plane_equation_coefficients[1], 1) - ); - } + // Create the matrix but don't correct the position yet + if (!dryrun) { + planner.bed_level_matrix = matrix_3x3::create_look_at( + vector_3(-plane_equation_coefficients[0], -plane_equation_coefficients[1], 1) + ); + } - // Show the Topography map if enabled - if (do_topography_map) { + // Show the Topography map if enabled + if (do_topography_map) { - SERIAL_PROTOCOLLNPGM("\nBed Height Topography:\n" - " +--- BACK --+\n" - " | |\n" - " L | (+) | R\n" - " E | | I\n" - " F | (-) N (+) | G\n" - " T | | H\n" - " | (-) | T\n" - " | |\n" - " O-- FRONT --+\n" - " (0,0)"); + SERIAL_PROTOCOLLNPGM("\nBed Height Topography:\n" + " +--- BACK --+\n" + " | |\n" + " L | (+) | R\n" + " E | | I\n" + " F | (-) N (+) | G\n" + " T | | H\n" + " | (-) | T\n" + " | |\n" + " O-- FRONT --+\n" + " (0,0)"); - float min_diff = 999; + float min_diff = 999; + + for (int8_t yy = auto_bed_leveling_grid_points - 1; yy >= 0; yy--) { + for (uint8_t xx = 0; xx < auto_bed_leveling_grid_points; xx++) { + int ind = indexIntoAB[xx][yy]; + float diff = eqnBVector[ind] - mean, + x_tmp = eqnAMatrix[ind + 0 * abl2], + y_tmp = eqnAMatrix[ind + 1 * abl2], + z_tmp = 0; + + apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp); + + NOMORE(min_diff, eqnBVector[ind] - z_tmp); + + if (diff >= 0.0) + SERIAL_PROTOCOLPGM(" +"); // Include + for column alignment + else + SERIAL_PROTOCOLCHAR(' '); + SERIAL_PROTOCOL_F(diff, 5); + } // xx + SERIAL_EOL; + } // yy + SERIAL_EOL; + + if (verbose_level > 3) { + SERIAL_PROTOCOLLNPGM("\nCorrected Bed Height vs. Bed Topology:"); for (int yy = auto_bed_leveling_grid_points - 1; yy >= 0; yy--) { for (int xx = 0; xx < auto_bed_leveling_grid_points; xx++) { int ind = indexIntoAB[xx][yy]; - float diff = eqnBVector[ind] - mean; - float x_tmp = eqnAMatrix[ind + 0 * abl2], y_tmp = eqnAMatrix[ind + 1 * abl2], z_tmp = 0; apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp); - NOMORE(min_diff, eqnBVector[ind] - z_tmp); - + float diff = eqnBVector[ind] - z_tmp - min_diff; if (diff >= 0.0) - SERIAL_PROTOCOLPGM(" +"); // Include + for column alignment + SERIAL_PROTOCOLPGM(" +"); + // Include + for column alignment else SERIAL_PROTOCOLCHAR(' '); SERIAL_PROTOCOL_F(diff, 5); @@ -3602,38 +3624,8 @@ inline void gcode_G28() { SERIAL_EOL; } // yy SERIAL_EOL; - - if (verbose_level > 3) { - SERIAL_PROTOCOLLNPGM("\nCorrected Bed Height vs. Bed Topology:"); - - for (int yy = auto_bed_leveling_grid_points - 1; yy >= 0; yy--) { - for (int xx = 0; xx < auto_bed_leveling_grid_points; xx++) { - int ind = indexIntoAB[xx][yy]; - float x_tmp = eqnAMatrix[ind + 0 * abl2], - y_tmp = eqnAMatrix[ind + 1 * abl2], - z_tmp = 0; - - apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp); - - float diff = eqnBVector[ind] - z_tmp - min_diff; - if (diff >= 0.0) - SERIAL_PROTOCOLPGM(" +"); - // Include + for column alignment - else - SERIAL_PROTOCOLCHAR(' '); - SERIAL_PROTOCOL_F(diff, 5); - } // xx - SERIAL_EOL; - } // yy - SERIAL_EOL; - } - } //do_topography_map - - #endif // AUTO_BED_LEVELING_LINEAR - - #endif // AUTO_BED_LEVELING_GRID - - #if ENABLED(AUTO_BED_LEVELING_LINEAR) + } + } //do_topography_map if (verbose_level > 0) planner.bed_level_matrix.debug("\n\nBed Level Correction Matrix:"); @@ -3682,7 +3674,7 @@ inline void gcode_G28() { #endif } - #endif // !DELTA + #endif // AUTO_BED_LEVELING_LINEAR #ifdef Z_PROBE_END_SCRIPT #if ENABLED(DEBUG_LEVELING_FEATURE) @@ -3703,7 +3695,7 @@ inline void gcode_G28() { KEEPALIVE_STATE(IN_HANDLER); } -#endif //AUTO_BED_LEVELING_FEATURE +#endif // AUTO_BED_LEVELING_FEATURE #if HAS_BED_PROBE @@ -3886,23 +3878,17 @@ inline void gcode_M17() { /** * M21: Init SD Card */ - inline void gcode_M21() { - card.initsd(); - } + inline void gcode_M21() { card.initsd(); } /** * M22: Release SD Card */ - inline void gcode_M22() { - card.release(); - } + inline void gcode_M22() { card.release(); } /** * M23: Open a file */ - inline void gcode_M23() { - card.openFile(current_command_args, true); - } + inline void gcode_M23() { card.openFile(current_command_args, true); } /** * M24: Start SD Print @@ -3915,9 +3901,7 @@ inline void gcode_M17() { /** * M25: Pause SD Print */ - inline void gcode_M25() { - card.pauseSDPrint(); - } + inline void gcode_M25() { card.pauseSDPrint(); } /** * M26: Set SD Card file index @@ -3930,16 +3914,12 @@ inline void gcode_M17() { /** * M27: Get SD Card status */ - inline void gcode_M27() { - card.getStatus(); - } + inline void gcode_M27() { card.getStatus(); } /** * M28: Start SD Write */ - inline void gcode_M28() { - card.openFile(current_command_args, false); - } + inline void gcode_M28() { card.openFile(current_command_args, false); } /** * M29: Stop SD Write @@ -3959,7 +3939,7 @@ inline void gcode_M17() { } } -#endif //SDSUPPORT +#endif // SDSUPPORT /** * M31: Get the time since the start of SD Print (or last M109) @@ -4318,7 +4298,8 @@ inline void gcode_M77() { print_job_timer.stop(); } // "M78 S78" will reset the statistics if (code_seen('S') && code_value_int() == 78) print_job_timer.initStats(); - else print_job_timer.showStats(); + else + print_job_timer.showStats(); } #endif @@ -4885,7 +4866,7 @@ inline void gcode_M140() { } } -#endif +#endif // ULTIPANEL #if ENABLED(TEMPERATURE_UNITS_SUPPORT) /** @@ -4959,7 +4940,6 @@ inline void gcode_M81() { #endif } - /** * M82: Set E codes absolute (default) */ @@ -5485,7 +5465,6 @@ inline void gcode_M221() { inline void gcode_M226() { if (code_seen('P')) { int pin_number = code_value_int(); - int pin_state = code_seen('S') ? code_value_int() : -1; // required pin state - default is inverted if (pin_state >= -1 && pin_state <= 1) { @@ -6536,6 +6515,10 @@ inline void invalid_extruder_error(const uint8_t &e) { SERIAL_ECHOLN(MSG_INVALID_EXTRUDER); } +/** + * Perform a tool-change, which may result in moving the + * previous tool out of the way and the new tool into place. + */ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool no_move/*=false*/) { #if ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1 @@ -7562,6 +7545,10 @@ ExitUnknownCommand: ok_to_send(); } +/** + * Send a "Resend: nnn" message to the host to + * indicate that a command needs to be re-sent. + */ void FlushSerialRequestResend() { //char command_queue[cmd_queue_index_r][100]="Resend:"; MYSERIAL.flush(); @@ -7570,6 +7557,15 @@ void FlushSerialRequestResend() { ok_to_send(); } +/** + * Send an "ok" message to the host, indicating + * that a command was successfully processed. + * + * If ADVANCED_OK is enabled also include: + * N Line number of the command, if any + * P Planner space remaining + * B Block queue space remaining + */ void ok_to_send() { refresh_cmd_timeout(); if (!send_ok[cmd_queue_index_r]) return; @@ -7590,6 +7586,9 @@ void ok_to_send() { #if ENABLED(min_software_endstops) || ENABLED(max_software_endstops) + /** + * Constrain the given coordinates to the software endstops. + */ void clamp_to_software_endstops(float target[XYZ]) { #if ENABLED(min_software_endstops) NOLESS(target[X_AXIS], soft_endstop_min[X_AXIS]); @@ -7607,6 +7606,10 @@ void ok_to_send() { #if ENABLED(DELTA) + /** + * Recalculate factors used for delta kinematics whenever + * settings have been changed (e.g., by M665). + */ void recalc_delta_settings(float radius, float diagonal_rod) { delta_tower1_x = -SIN_60 * (radius + DELTA_RADIUS_TRIM_TOWER_1); // front left tower delta_tower1_y = -COS_60 * (radius + DELTA_RADIUS_TRIM_TOWER_1); @@ -7619,37 +7622,85 @@ void ok_to_send() { delta_diagonal_rod_2_tower_3 = sq(diagonal_rod + delta_diagonal_rod_trim_tower_3); } - void inverse_kinematics(const float in_cartesian[XYZ]) { + #if ENABLED(DELTA_FAST_SQRT) + /** + * Fast inverse sqrt from Quake III Arena + * See: https://en.wikipedia.org/wiki/Fast_inverse_square_root + */ + float Q_rsqrt(float number) { + long i; + float x2, y; + const float threehalfs = 1.5f; + x2 = number * 0.5f; + y = number; + i = * ( long * ) &y; // evil floating point bit level hacking + i = 0x5f3759df - ( i >> 1 ); // what the f***? + y = * ( float * ) &i; + y = y * ( threehalfs - ( x2 * y * y ) ); // 1st iteration + // y = y * ( threehalfs - ( x2 * y * y ) ); // 2nd iteration, this can be removed + return y; + } + + #define _SQRT(n) (1.0f / Q_rsqrt(n)) + + #else + + #define _SQRT(n) sqrt(n) + + #endif + + /** + * Delta Inverse Kinematics + * + * Calculate the tower positions for a given logical + * position, storing the result in the delta[] array. + * + * This is an expensive calculation, requiring 3 square + * roots per segmented linear move, and strains the limits + * of a Mega2560 with a Graphical Display. + * + * Suggested optimizations include: + * + * - Disable the home_offset (M206) and/or position_shift (G92) + * features to remove up to 12 float additions. + * + * - Use a fast-inverse-sqrt function and add the reciprocal. + * (see above) + */ + void inverse_kinematics(const float logical[XYZ]) { const float cartesian[XYZ] = { - RAW_X_POSITION(in_cartesian[X_AXIS]), - RAW_Y_POSITION(in_cartesian[Y_AXIS]), - RAW_Z_POSITION(in_cartesian[Z_AXIS]) + RAW_X_POSITION(logical[X_AXIS]), + RAW_Y_POSITION(logical[Y_AXIS]), + RAW_Z_POSITION(logical[Z_AXIS]) }; - delta[A_AXIS] = sqrt(delta_diagonal_rod_2_tower_1 - - sq(delta_tower1_x - cartesian[X_AXIS]) - - sq(delta_tower1_y - cartesian[Y_AXIS]) - ) + cartesian[Z_AXIS]; - delta[B_AXIS] = sqrt(delta_diagonal_rod_2_tower_2 - - sq(delta_tower2_x - cartesian[X_AXIS]) - - sq(delta_tower2_y - cartesian[Y_AXIS]) - ) + cartesian[Z_AXIS]; - delta[C_AXIS] = sqrt(delta_diagonal_rod_2_tower_3 - - sq(delta_tower3_x - cartesian[X_AXIS]) - - sq(delta_tower3_y - cartesian[Y_AXIS]) - ) + cartesian[Z_AXIS]; - /** - SERIAL_ECHOPAIR("cartesian x=", cartesian[X_AXIS]); - SERIAL_ECHOPAIR(" y=", cartesian[Y_AXIS]); - SERIAL_ECHOLNPAIR(" z=", cartesian[Z_AXIS]); + // Macro to obtain the Z position of an individual tower + #define DELTA_Z(T) cartesian[Z_AXIS] + _SQRT( \ + delta_diagonal_rod_2_tower_##T - HYPOT2( \ + delta_tower##T##_x - cartesian[X_AXIS], \ + delta_tower##T##_y - cartesian[Y_AXIS] \ + ) \ + ) - SERIAL_ECHOPAIR("delta a=", delta[A_AXIS]); - SERIAL_ECHOPAIR(" b=", delta[B_AXIS]); - SERIAL_ECHOLNPAIR(" c=", delta[C_AXIS]); - */ + delta[A_AXIS] = DELTA_Z(1); + delta[B_AXIS] = DELTA_Z(2); + delta[C_AXIS] = DELTA_Z(3); + + /* + SERIAL_ECHOPAIR("cartesian X:", cartesian[X_AXIS]); + SERIAL_ECHOPAIR(" Y:", cartesian[Y_AXIS]); + SERIAL_ECHOLNPAIR(" Z:", cartesian[Z_AXIS]); + SERIAL_ECHOPAIR("delta A:", delta[A_AXIS]); + SERIAL_ECHOPAIR(" B:", delta[B_AXIS]); + SERIAL_ECHOLNPAIR(" C:", delta[C_AXIS]); + //*/ } + /** + * Calculate the highest Z position where the + * effector has the full range of XY motion. + */ float delta_safe_distance_from_top() { float cartesian[XYZ] = { LOGICAL_X_POSITION(0), @@ -7663,73 +7714,80 @@ void ok_to_send() { return abs(distance - delta[A_AXIS]); } + /** + * Delta Forward Kinematics + * + * See the Wikipedia article "Trilateration" + * https://en.wikipedia.org/wiki/Trilateration + * + * Establish a new coordinate system in the plane of the + * three carriage points. This system has its origin at + * tower1, with tower2 on the X axis. Tower3 is in the X-Y + * plane with a Z component of zero. + * We will define unit vectors in this coordinate system + * in our original coordinate system. Then when we calculate + * the Xnew, Ynew and Znew values, we can translate back into + * the original system by moving along those unit vectors + * by the corresponding values. + * + * Variable names matched to Marlin, c-version, and avoid the + * use of any vector library. + * + * by Andreas Hardtung 2016-06-07 + * based on a Java function from "Delta Robot Kinematics V3" + * by Steve Graves + * + * The result is stored in the cartes[] array. + */ void forward_kinematics_DELTA(float z1, float z2, float z3) { - //As discussed in Wikipedia "Trilateration" - //we are establishing a new coordinate - //system in the plane of the three carriage points. - //This system will have the origin at tower1 and - //tower2 is on the x axis. tower3 is in the X-Y - //plane with a Z component of zero. We will define unit - //vectors in this coordinate system in our original - //coordinate system. Then when we calculate the - //Xnew, Ynew and Znew values, we can translate back into - //the original system by moving along those unit vectors - //by the corresponding values. - // https://en.wikipedia.org/wiki/Trilateration - - // Variable names matched to Marlin, c-version - // and avoiding a vector library - // by Andreas Hardtung 2016-06-7 - // based on a Java function from - // "Delta Robot Kinematics by Steve Graves" V3 - - // Result is in cartes[]. - - //Create a vector in old coordinates along x axis of new coordinate + // Create a vector in old coordinates along x axis of new coordinate float p12[3] = { delta_tower2_x - delta_tower1_x, delta_tower2_y - delta_tower1_y, z2 - z1 }; - //Get the Magnitude of vector. - float d = sqrt( p12[0]*p12[0] + p12[1]*p12[1] + p12[2]*p12[2] ); + // Get the Magnitude of vector. + float d = sqrt( sq(p12[0]) + sq(p12[1]) + sq(p12[2]) ); - //Create unit vector by dividing by magnitude. - float ex[3] = { p12[0]/d, p12[1]/d, p12[2]/d }; + // Create unit vector by dividing by magnitude. + float ex[3] = { p12[0] / d, p12[1] / d, p12[2] / d }; - //Now find vector from the origin of the new system to the third point. + // Get the vector from the origin of the new system to the third point. float p13[3] = { delta_tower3_x - delta_tower1_x, delta_tower3_y - delta_tower1_y, z3 - z1 }; - //Now use dot product to find the component of this vector on the X axis. - float i = ex[0]*p13[0] + ex[1]*p13[1] + ex[2]*p13[2]; + // Use the dot product to find the component of this vector on the X axis. + float i = ex[0] * p13[0] + ex[1] * p13[1] + ex[2] * p13[2]; - //Now create a vector along the x axis that represents the x component of p13. - float iex[3] = { ex[0]*i, ex[1]*i, ex[2]*i }; + // Create a vector along the x axis that represents the x component of p13. + float iex[3] = { ex[0] * i, ex[1] * i, ex[2] * i }; - //Now subtract the X component away from the original vector leaving only the Y component. We use the - //variable that will be the unit vector after we scale it. - float ey[3] = { p13[0] - iex[0], p13[1] - iex[1], p13[2] - iex[2]}; + // Subtract the X component from the original vector leaving only Y. We use the + // variable that will be the unit vector after we scale it. + float ey[3] = { p13[0] - iex[0], p13[1] - iex[1], p13[2] - iex[2] }; - //The magnitude of Y component - float j = sqrt(sq(ey[0]) + sq(ey[1]) + sq(ey[2])); + // The magnitude of Y component + float j = sqrt( sq(ey[0]) + sq(ey[1]) + sq(ey[2]) ); - //Now make vector a unit vector + // Convert to a unit vector ey[0] /= j; ey[1] /= j; ey[2] /= j; - //The cross product of the unit x and y is the unit z - //float[] ez = vectorCrossProd(ex, ey); - float ez[3] = { ex[1]*ey[2] - ex[2]*ey[1], ex[2]*ey[0] - ex[0]*ey[2], ex[0]*ey[1] - ex[1]*ey[0] }; + // The cross product of the unit x and y is the unit z + // float[] ez = vectorCrossProd(ex, ey); + float ez[3] = { + ex[1] * ey[2] - ex[2] * ey[1], + ex[2] * ey[0] - ex[0] * ey[2], + ex[0] * ey[1] - ex[1] * ey[0] + }; - //Now we have the d, i and j values defined in Wikipedia. - //We can plug them into the equations defined in - //Wikipedia for Xnew, Ynew and Znew - float Xnew = (delta_diagonal_rod_2_tower_1 - delta_diagonal_rod_2_tower_2 + d*d)/(d*2); - float Ynew = ((delta_diagonal_rod_2_tower_1 - delta_diagonal_rod_2_tower_3 + i*i + j*j)/2 - i*Xnew) /j; - float Znew = sqrt(delta_diagonal_rod_2_tower_1 - Xnew*Xnew - Ynew*Ynew); + // We now have the d, i and j values defined in Wikipedia. + // Plug them into the equations defined in Wikipedia for Xnew, Ynew and Znew + float Xnew = (delta_diagonal_rod_2_tower_1 - delta_diagonal_rod_2_tower_2 + sq(d)) / (d * 2), + Ynew = ((delta_diagonal_rod_2_tower_1 - delta_diagonal_rod_2_tower_3 + HYPOT2(i, j)) / 2 - i * Xnew) / j, + Znew = sqrt(delta_diagonal_rod_2_tower_1 - HYPOT2(Xnew, Ynew)); - //Now we can start from the origin in the old coords and - //add vectors in the old coords that represent the - //Xnew, Ynew and Znew to find the point in the old system - cartes[X_AXIS] = delta_tower1_x + ex[0]*Xnew + ey[0]*Ynew - ez[0]*Znew; - cartes[Y_AXIS] = delta_tower1_y + ex[1]*Xnew + ey[1]*Ynew - ez[1]*Znew; - cartes[Z_AXIS] = z1 + ex[2]*Xnew + ey[2]*Ynew - ez[2]*Znew; + // Start from the origin of the old coordinates and add vectors in the + // old coords that represent the Xnew, Ynew and Znew to find the point + // in the old system. + cartes[X_AXIS] = delta_tower1_x + ex[0] * Xnew + ey[0] * Ynew - ez[0] * Znew; + cartes[Y_AXIS] = delta_tower1_y + ex[1] * Xnew + ey[1] * Ynew - ez[1] * Znew; + cartes[Z_AXIS] = z1 + ex[2] * Xnew + ey[2] * Ynew - ez[2] * Znew; }; void forward_kinematics_DELTA(float point[ABC]) { @@ -7780,6 +7838,42 @@ void ok_to_send() { #endif // DELTA +/** + * Get the stepper positions in the cartes[] array. + * Forward kinematics are applied for DELTA and SCARA. + * + * The result is in the current coordinate space with + * leveling applied. The coordinates need to be run through + * unapply_leveling to obtain the "ideal" coordinates + * suitable for current_position, etc. + */ +void get_cartesian_from_steppers() { + #if ENABLED(DELTA) + forward_kinematics_DELTA( + stepper.get_axis_position_mm(A_AXIS), + stepper.get_axis_position_mm(B_AXIS), + stepper.get_axis_position_mm(C_AXIS) + ); + #elif IS_SCARA + forward_kinematics_SCARA( + stepper.get_axis_position_degrees(A_AXIS), + stepper.get_axis_position_degrees(B_AXIS) + ); + cartes[Z_AXIS] = stepper.get_axis_position_mm(Z_AXIS); + #else + cartes[X_AXIS] = stepper.get_axis_position_mm(X_AXIS); + cartes[Y_AXIS] = stepper.get_axis_position_mm(Y_AXIS); + cartes[Z_AXIS] = stepper.get_axis_position_mm(Z_AXIS); + #endif +} + +/** + * Set the current_position for an axis based on + * the stepper positions, removing any leveling that + * may have been applied. + * + * << INCOMPLETE! Still needs to unapply leveling! >> + */ void set_current_from_steppers_for_axis(AxisEnum axis) { #if ENABLED(AUTO_BED_LEVELING_LINEAR) vector_3 pos = untilted_stepper_position(); @@ -7794,65 +7888,75 @@ void set_current_from_steppers_for_axis(AxisEnum axis) { #if ENABLED(MESH_BED_LEVELING) -// This function is used to split lines on mesh borders so each segment is only part of one mesh area -void mesh_line_to_destination(float fr_mm_s, uint8_t x_splits = 0xff, uint8_t y_splits = 0xff) { - int cx1 = mbl.cell_index_x(RAW_CURRENT_POSITION(X_AXIS)), - cy1 = mbl.cell_index_y(RAW_CURRENT_POSITION(Y_AXIS)), - cx2 = mbl.cell_index_x(RAW_X_POSITION(destination[X_AXIS])), - cy2 = mbl.cell_index_y(RAW_Y_POSITION(destination[Y_AXIS])); - NOMORE(cx1, MESH_NUM_X_POINTS - 2); - NOMORE(cy1, MESH_NUM_Y_POINTS - 2); - NOMORE(cx2, MESH_NUM_X_POINTS - 2); - NOMORE(cy2, MESH_NUM_Y_POINTS - 2); + /** + * Prepare a mesh-leveled linear move in a Cartesian setup, + * splitting the move where it crosses mesh borders. + */ + void mesh_line_to_destination(float fr_mm_s, uint8_t x_splits = 0xff, uint8_t y_splits = 0xff) { + int cx1 = mbl.cell_index_x(RAW_CURRENT_POSITION(X_AXIS)), + cy1 = mbl.cell_index_y(RAW_CURRENT_POSITION(Y_AXIS)), + cx2 = mbl.cell_index_x(RAW_X_POSITION(destination[X_AXIS])), + cy2 = mbl.cell_index_y(RAW_Y_POSITION(destination[Y_AXIS])); + NOMORE(cx1, MESH_NUM_X_POINTS - 2); + NOMORE(cy1, MESH_NUM_Y_POINTS - 2); + NOMORE(cx2, MESH_NUM_X_POINTS - 2); + NOMORE(cy2, MESH_NUM_Y_POINTS - 2); - if (cx1 == cx2 && cy1 == cy2) { - // Start and end on same mesh square - line_to_destination(fr_mm_s); - set_current_to_destination(); - return; + if (cx1 == cx2 && cy1 == cy2) { + // Start and end on same mesh square + line_to_destination(fr_mm_s); + set_current_to_destination(); + return; + } + + #define MBL_SEGMENT_END(A) (current_position[A ##_AXIS] + (destination[A ##_AXIS] - current_position[A ##_AXIS]) * normalized_dist) + + float normalized_dist, end[NUM_AXIS]; + + // Split at the left/front border of the right/top square + int8_t gcx = max(cx1, cx2), gcy = max(cy1, cy2); + if (cx2 != cx1 && TEST(x_splits, gcx)) { + memcpy(end, destination, sizeof(end)); + destination[X_AXIS] = LOGICAL_X_POSITION(mbl.get_probe_x(gcx)); + normalized_dist = (destination[X_AXIS] - current_position[X_AXIS]) / (end[X_AXIS] - current_position[X_AXIS]); + destination[Y_AXIS] = MBL_SEGMENT_END(Y); + CBI(x_splits, gcx); + } + else if (cy2 != cy1 && TEST(y_splits, gcy)) { + memcpy(end, destination, sizeof(end)); + destination[Y_AXIS] = LOGICAL_Y_POSITION(mbl.get_probe_y(gcy)); + normalized_dist = (destination[Y_AXIS] - current_position[Y_AXIS]) / (end[Y_AXIS] - current_position[Y_AXIS]); + destination[X_AXIS] = MBL_SEGMENT_END(X); + CBI(y_splits, gcy); + } + else { + // Already split on a border + line_to_destination(fr_mm_s); + set_current_to_destination(); + return; + } + + destination[Z_AXIS] = MBL_SEGMENT_END(Z); + destination[E_AXIS] = MBL_SEGMENT_END(E); + + // Do the split and look for more borders + mesh_line_to_destination(fr_mm_s, x_splits, y_splits); + + // Restore destination from stack + memcpy(destination, end, sizeof(end)); + mesh_line_to_destination(fr_mm_s, x_splits, y_splits); } - #define MBL_SEGMENT_END(A) (current_position[A ##_AXIS] + (destination[A ##_AXIS] - current_position[A ##_AXIS]) * normalized_dist) - - float normalized_dist, end[NUM_AXIS]; - - // Split at the left/front border of the right/top square - int8_t gcx = max(cx1, cx2), gcy = max(cy1, cy2); - if (cx2 != cx1 && TEST(x_splits, gcx)) { - memcpy(end, destination, sizeof(end)); - destination[X_AXIS] = LOGICAL_X_POSITION(mbl.get_probe_x(gcx)); - normalized_dist = (destination[X_AXIS] - current_position[X_AXIS]) / (end[X_AXIS] - current_position[X_AXIS]); - destination[Y_AXIS] = MBL_SEGMENT_END(Y); - CBI(x_splits, gcx); - } - else if (cy2 != cy1 && TEST(y_splits, gcy)) { - memcpy(end, destination, sizeof(end)); - destination[Y_AXIS] = LOGICAL_Y_POSITION(mbl.get_probe_y(gcy)); - normalized_dist = (destination[Y_AXIS] - current_position[Y_AXIS]) / (end[Y_AXIS] - current_position[Y_AXIS]); - destination[X_AXIS] = MBL_SEGMENT_END(X); - CBI(y_splits, gcy); - } - else { - // Already split on a border - line_to_destination(fr_mm_s); - set_current_to_destination(); - return; - } - - destination[Z_AXIS] = MBL_SEGMENT_END(Z); - destination[E_AXIS] = MBL_SEGMENT_END(E); - - // Do the split and look for more borders - mesh_line_to_destination(fr_mm_s, x_splits, y_splits); - - // Restore destination from stack - memcpy(destination, end, sizeof(end)); - mesh_line_to_destination(fr_mm_s, x_splits, y_splits); -} #endif // MESH_BED_LEVELING #if IS_KINEMATIC + /** + * Prepare a linear move in a DELTA or SCARA setup. + * + * This calls planner.buffer_line several times, adding + * small incremental moves for DELTA or SCARA. + */ inline bool prepare_kinematic_move_to(float target[NUM_AXIS]) { float difference[NUM_AXIS]; LOOP_XYZE(i) difference[i] = target[i] - current_position[i]; @@ -7890,10 +7994,37 @@ void mesh_line_to_destination(float fr_mm_s, uint8_t x_splits = 0xff, uint8_t y_ return true; } -#endif // IS_KINEMATIC +#else + + /** + * Prepare a linear move in a Cartesian setup. + * If Mesh Bed Leveling is enabled, perform a mesh move. + */ + inline bool prepare_move_to_destination_cartesian() { + // Do not use feedrate_percentage for E or Z only moves + if (current_position[X_AXIS] == destination[X_AXIS] && current_position[Y_AXIS] == destination[Y_AXIS]) { + line_to_destination(); + } + else { + #if ENABLED(MESH_BED_LEVELING) + if (mbl.active()) { + mesh_line_to_destination(MMS_SCALED(feedrate_mm_s)); + return false; + } + else + #endif + line_to_destination(MMS_SCALED(feedrate_mm_s)); + } + return true; + } + +#endif // !IS_KINEMATIC #if ENABLED(DUAL_X_CARRIAGE) + /** + * Prepare a linear move in a dual X axis setup + */ inline bool prepare_move_to_destination_dualx() { if (active_extruder_parked) { if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && active_extruder == 0) { @@ -7936,63 +8067,35 @@ void mesh_line_to_destination(float fr_mm_s, uint8_t x_splits = 0xff, uint8_t y_ #endif // DUAL_X_CARRIAGE -#if !IS_KINEMATIC - - inline bool prepare_move_to_destination_cartesian() { - // Do not use feedrate_percentage for E or Z only moves - if (current_position[X_AXIS] == destination[X_AXIS] && current_position[Y_AXIS] == destination[Y_AXIS]) { - line_to_destination(); - } - else { - #if ENABLED(MESH_BED_LEVELING) - if (mbl.active()) { - mesh_line_to_destination(MMS_SCALED(feedrate_mm_s)); - return false; - } - else - #endif - line_to_destination(MMS_SCALED(feedrate_mm_s)); - } - return true; - } - -#endif // !IS_KINEMATIC - -#if ENABLED(PREVENT_COLD_EXTRUSION) - - inline void prevent_dangerous_extrude(float& curr_e, float& dest_e) { - if (DEBUGGING(DRYRUN)) return; - float de = dest_e - curr_e; - if (de) { - if (thermalManager.tooColdToExtrude(active_extruder)) { - curr_e = dest_e; // Behave as if the move really took place, but ignore E part - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP); - } - #if ENABLED(PREVENT_LENGTHY_EXTRUDE) - if (labs(de) > EXTRUDE_MAXLENGTH) { - curr_e = dest_e; // Behave as if the move really took place, but ignore E part - SERIAL_ECHO_START; - SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP); - } - #endif - } - } - -#endif // PREVENT_COLD_EXTRUSION - /** * Prepare a single move and get ready for the next one * - * (This may call planner.buffer_line several times to put - * smaller moves into the planner for DELTA or SCARA.) + * This may result in several calls to planner.buffer_line to + * do smaller moves for DELTA, SCARA, mesh moves, etc. */ void prepare_move_to_destination() { clamp_to_software_endstops(destination); refresh_cmd_timeout(); #if ENABLED(PREVENT_COLD_EXTRUSION) - prevent_dangerous_extrude(current_position[E_AXIS], destination[E_AXIS]); + + if (!DEBUGGING(DRYRUN)) { + if (destination[E_AXIS] != current_position[E_AXIS]) { + if (thermalManager.tooColdToExtrude(active_extruder)) { + current_position[E_AXIS] = destination[E_AXIS]; // Behave as if the move really took place, but ignore E part + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP); + } + #if ENABLED(PREVENT_LENGTHY_EXTRUDE) + if (labs(destination[E_AXIS] - current_position[E_AXIS]) > EXTRUDE_MAXLENGTH) { + current_position[E_AXIS] = destination[E_AXIS]; // Behave as if the move really took place, but ignore E part + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP); + } + #endif + } + } + #endif #if IS_KINEMATIC @@ -8281,26 +8384,6 @@ void prepare_move_to_destination() { #endif // IS_SCARA -void get_cartesian_from_steppers() { - #if ENABLED(DELTA) - forward_kinematics_DELTA( - stepper.get_axis_position_mm(A_AXIS), - stepper.get_axis_position_mm(B_AXIS), - stepper.get_axis_position_mm(C_AXIS) - ); - #elif IS_SCARA - forward_kinematics_SCARA( - stepper.get_axis_position_degrees(A_AXIS), - stepper.get_axis_position_degrees(B_AXIS) - ); - cartes[Z_AXIS] = stepper.get_axis_position_mm(Z_AXIS); - #else - cartes[X_AXIS] = stepper.get_axis_position_mm(X_AXIS); - cartes[Y_AXIS] = stepper.get_axis_position_mm(Y_AXIS); - cartes[Z_AXIS] = stepper.get_axis_position_mm(Z_AXIS); - #endif -} - #if ENABLED(TEMP_STAT_LEDS) static bool red_led = false; @@ -8327,6 +8410,91 @@ void get_cartesian_from_steppers() { #endif +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + + void handle_filament_runout() { + if (!filament_ran_out) { + filament_ran_out = true; + enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT)); + stepper.synchronize(); + } + } + +#endif // FILAMENT_RUNOUT_SENSOR + +#if ENABLED(FAST_PWM_FAN) + + void setPwmFrequency(uint8_t pin, int val) { + val &= 0x07; + switch (digitalPinToTimer(pin)) { + #if defined(TCCR0A) + case TIMER0A: + case TIMER0B: + // TCCR0B &= ~(_BV(CS00) | _BV(CS01) | _BV(CS02)); + // TCCR0B |= val; + break; + #endif + #if defined(TCCR1A) + case TIMER1A: + case TIMER1B: + // TCCR1B &= ~(_BV(CS10) | _BV(CS11) | _BV(CS12)); + // TCCR1B |= val; + break; + #endif + #if defined(TCCR2) + case TIMER2: + case TIMER2: + TCCR2 &= ~(_BV(CS10) | _BV(CS11) | _BV(CS12)); + TCCR2 |= val; + break; + #endif + #if defined(TCCR2A) + case TIMER2A: + case TIMER2B: + TCCR2B &= ~(_BV(CS20) | _BV(CS21) | _BV(CS22)); + TCCR2B |= val; + break; + #endif + #if defined(TCCR3A) + case TIMER3A: + case TIMER3B: + case TIMER3C: + TCCR3B &= ~(_BV(CS30) | _BV(CS31) | _BV(CS32)); + TCCR3B |= val; + break; + #endif + #if defined(TCCR4A) + case TIMER4A: + case TIMER4B: + case TIMER4C: + TCCR4B &= ~(_BV(CS40) | _BV(CS41) | _BV(CS42)); + TCCR4B |= val; + break; + #endif + #if defined(TCCR5A) + case TIMER5A: + case TIMER5B: + case TIMER5C: + TCCR5B &= ~(_BV(CS50) | _BV(CS51) | _BV(CS52)); + TCCR5B |= val; + break; + #endif + } + } + +#endif // FAST_PWM_FAN + +float calculate_volumetric_multiplier(float diameter) { + if (!volumetric_enabled || diameter == 0) return 1.0; + float d2 = diameter * 0.5; + return 1.0 / (M_PI * d2 * d2); +} + +void calculate_volumetric_multipliers() { + for (uint8_t i = 0; i < COUNT(filament_size); i++) + volumetric_multiplier[i] = calculate_volumetric_multiplier(filament_size[i]); +} + void enable_all_steppers() { enable_x(); enable_y(); @@ -8347,33 +8515,6 @@ void disable_all_steppers() { disable_e3(); } -/** - * Standard idle routine keeps the machine alive - */ -void idle( - #if ENABLED(FILAMENT_CHANGE_FEATURE) - bool no_stepper_sleep/*=false*/ - #endif -) { - lcd_update(); - host_keepalive(); - manage_inactivity( - #if ENABLED(FILAMENT_CHANGE_FEATURE) - no_stepper_sleep - #endif - ); - - thermalManager.manage_heater(); - - #if ENABLED(PRINTCOUNTER) - print_job_timer.tick(); - #endif - - #if HAS_BUZZER && PIN_EXISTS(BEEPER) - buzzer.tick(); - #endif -} - /** * Manage several activities: * - Check for Filament Runout @@ -8551,6 +8692,37 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) { planner.check_axes_activity(); } +/** + * Standard idle routine keeps the machine alive + */ +void idle( + #if ENABLED(FILAMENT_CHANGE_FEATURE) + bool no_stepper_sleep/*=false*/ + #endif +) { + lcd_update(); + host_keepalive(); + manage_inactivity( + #if ENABLED(FILAMENT_CHANGE_FEATURE) + no_stepper_sleep + #endif + ); + + thermalManager.manage_heater(); + + #if ENABLED(PRINTCOUNTER) + print_job_timer.tick(); + #endif + + #if HAS_BUZZER && PIN_EXISTS(BEEPER) + buzzer.tick(); + #endif +} + +/** + * Kill all activity and lock the machine. + * After this the machine will need to be reset. + */ void kill(const char* lcd_msg) { SERIAL_ERROR_START; SERIAL_ERRORLNPGM(MSG_ERR_KILLED); @@ -8579,79 +8751,10 @@ void kill(const char* lcd_msg) { } // Wait for reset } -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - - void handle_filament_runout() { - if (!filament_ran_out) { - filament_ran_out = true; - enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT)); - stepper.synchronize(); - } - } - -#endif // FILAMENT_RUNOUT_SENSOR - -#if ENABLED(FAST_PWM_FAN) - - void setPwmFrequency(uint8_t pin, int val) { - val &= 0x07; - switch (digitalPinToTimer(pin)) { - #if defined(TCCR0A) - case TIMER0A: - case TIMER0B: - // TCCR0B &= ~(_BV(CS00) | _BV(CS01) | _BV(CS02)); - // TCCR0B |= val; - break; - #endif - #if defined(TCCR1A) - case TIMER1A: - case TIMER1B: - // TCCR1B &= ~(_BV(CS10) | _BV(CS11) | _BV(CS12)); - // TCCR1B |= val; - break; - #endif - #if defined(TCCR2) - case TIMER2: - case TIMER2: - TCCR2 &= ~(_BV(CS10) | _BV(CS11) | _BV(CS12)); - TCCR2 |= val; - break; - #endif - #if defined(TCCR2A) - case TIMER2A: - case TIMER2B: - TCCR2B &= ~(_BV(CS20) | _BV(CS21) | _BV(CS22)); - TCCR2B |= val; - break; - #endif - #if defined(TCCR3A) - case TIMER3A: - case TIMER3B: - case TIMER3C: - TCCR3B &= ~(_BV(CS30) | _BV(CS31) | _BV(CS32)); - TCCR3B |= val; - break; - #endif - #if defined(TCCR4A) - case TIMER4A: - case TIMER4B: - case TIMER4C: - TCCR4B &= ~(_BV(CS40) | _BV(CS41) | _BV(CS42)); - TCCR4B |= val; - break; - #endif - #if defined(TCCR5A) - case TIMER5A: - case TIMER5B: - case TIMER5C: - TCCR5B &= ~(_BV(CS50) | _BV(CS51) | _BV(CS52)); - TCCR5B |= val; - break; - #endif - } - } -#endif // FAST_PWM_FAN - +/** + * Turn off heaters and stop the print in progress + * After a stop the machine may be resumed with M999 + */ void stop() { thermalManager.disable_all_heaters(); if (IsRunning()) { @@ -8663,17 +8766,6 @@ void stop() { } } -float calculate_volumetric_multiplier(float diameter) { - if (!volumetric_enabled || diameter == 0) return 1.0; - float d2 = diameter * 0.5; - return 1.0 / (M_PI * d2 * d2); -} - -void calculate_volumetric_multipliers() { - for (uint8_t i = 0; i < COUNT(filament_size); i++) - volumetric_multiplier[i] = calculate_volumetric_multiplier(filament_size[i]); -} - /** * Marlin entry-point: Set up before the program loop * - Set up the kill pin, filament runout, power hold