Add RESTORE_LEVELING_AFTER_G28 option

This commit is contained in:
Scott Lahteine 2018-02-23 12:41:00 -06:00
parent 65519263f4
commit b2cf253a13
5 changed files with 20 additions and 6 deletions

View file

@ -83,7 +83,7 @@ script:
- opt_set TEMP_SENSOR_3 20 - opt_set TEMP_SENSOR_3 20
- opt_set TEMP_SENSOR_4 999 - opt_set TEMP_SENSOR_4 999
- opt_set TEMP_SENSOR_BED 1 - opt_set TEMP_SENSOR_BED 1
- opt_enable AUTO_BED_LEVELING_UBL DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS EEPROM_CHITCHAT G3D_PANEL SKEW_CORRECTION - opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS EEPROM_CHITCHAT G3D_PANEL SKEW_CORRECTION
- opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME - opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM} - build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
# #
@ -299,7 +299,7 @@ script:
# #
- use_example_configs delta/generic - use_example_configs delta/generic
- opt_disable DISABLE_MIN_ENDSTOPS - opt_disable DISABLE_MIN_ENDSTOPS
- opt_enable AUTO_BED_LEVELING_UBL Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY - opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM} - build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
# #
# Delta Config (FLSUN AC because it's complex) # Delta Config (FLSUN AC because it's complex)

View file

@ -912,6 +912,12 @@
//#define AUTO_BED_LEVELING_UBL //#define AUTO_BED_LEVELING_UBL
//#define MESH_BED_LEVELING //#define MESH_BED_LEVELING
/**
* Normally G28 leaves leveling disabled on completion. Enable
* this option to have G28 restore the prior leveling state.
*/
//#define RESTORE_LEVELING_AFTER_G28
/** /**
* Enable detailed logging of G28, G29, M48, etc. * Enable detailed logging of G28, G29, M48, etc.
* Turn on with the command 'M111 S32'. * Turn on with the command 'M111 S32'.

View file

@ -912,6 +912,12 @@
//#define AUTO_BED_LEVELING_UBL //#define AUTO_BED_LEVELING_UBL
//#define MESH_BED_LEVELING //#define MESH_BED_LEVELING
/**
* Normally G28 leaves leveling disabled on completion. Enable
* this option to have G28 restore the prior leveling state.
*/
//#define RESTORE_LEVELING_AFTER_G28
/** /**
* Enable detailed logging of G28, G29, M48, etc. * Enable detailed logging of G28, G29, M48, etc.
* Turn on with the command 'M111 S32'. * Turn on with the command 'M111 S32'.

View file

@ -183,8 +183,8 @@ void GcodeSuite::G28(const bool always_home_all) {
// Disable the leveling matrix before homing // Disable the leveling matrix before homing
#if HAS_LEVELING #if HAS_LEVELING
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(RESTORE_LEVELING_AFTER_G28)
const bool ubl_state_at_entry = planner.leveling_active; const bool leveling_state_at_entry = planner.leveling_active;
#endif #endif
set_bed_leveling_enabled(false); set_bed_leveling_enabled(false);
#endif #endif
@ -319,8 +319,8 @@ void GcodeSuite::G28(const bool always_home_all) {
do_blocking_move_to_z(delta_clip_start_height); do_blocking_move_to_z(delta_clip_start_height);
#endif #endif
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(RESTORE_LEVELING_AFTER_G28)
set_bed_leveling_enabled(ubl_state_at_entry); set_bed_leveling_enabled(leveling_state_at_entry);
#endif #endif
clean_up_after_endstop_or_probe_move(); clean_up_after_endstop_or_probe_move();

View file

@ -834,6 +834,8 @@ static_assert(1 >= 0
#error "AUTO_BED_LEVELING_UBL requires EEPROM_SETTINGS. Please update your configuration." #error "AUTO_BED_LEVELING_UBL requires EEPROM_SETTINGS. Please update your configuration."
#elif !WITHIN(GRID_MAX_POINTS_X, 3, 15) || !WITHIN(GRID_MAX_POINTS_Y, 3, 15) #elif !WITHIN(GRID_MAX_POINTS_X, 3, 15) || !WITHIN(GRID_MAX_POINTS_Y, 3, 15)
#error "GRID_MAX_POINTS_[XY] must be a whole number between 3 and 15." #error "GRID_MAX_POINTS_[XY] must be a whole number between 3 and 15."
#elif DISABLED(RESTORE_LEVELING_AFTER_G28)
#error "AUTO_BED_LEVELING_UBL (<=1.1.8) always has RESTORE_LEVELING_AFTER_G28 enabled. To keep this behavior, #define RESTORE_LEVELING_AFTER_G28. To keep it disabled comment out this line in SanityCheck.h."
#else #else
static_assert(WITHIN(UBL_PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X), "UBL_PROBE_PT_1_X can't be reached by the Z probe."); static_assert(WITHIN(UBL_PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X), "UBL_PROBE_PT_1_X can't be reached by the Z probe.");
static_assert(WITHIN(UBL_PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X), "UBL_PROBE_PT_2_X can't be reached by the Z probe."); static_assert(WITHIN(UBL_PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X), "UBL_PROBE_PT_2_X can't be reached by the Z probe.");