Update Slovak language

This commit is contained in:
Roman Moravčík 2019-10-06 01:29:17 +02:00 committed by Scott Lahteine
parent 43aba9f918
commit b90dff020e

View file

@ -43,9 +43,14 @@
#define MSG_YES _UxGT("ÁNO")
#define MSG_NO _UxGT("NIE")
#define MSG_BACK _UxGT("Naspäť")
#define MSG_MEDIA_ABORTING _UxGT("Ruším...")
#define MSG_MEDIA_INSERTED _UxGT("Karta vložená")
#define MSG_MEDIA_REMOVED _UxGT("Karta vybraná")
#define MSG_MEDIA_RELEASED _UxGT("Karta odpojená")
#define MSG_MEDIA_WAITING _UxGT("Čakám na kartu")
#define MSG_MEDIA_READ_ERROR _UxGT("Chyba čítania karty")
#define MSG_MEDIA_USB_REMOVED _UxGT("USB zaria. odstrán.")
#define MSG_MEDIA_USB_FAILED _UxGT("Chyba spúšťania USB")
#define MSG_LCD_ENDSTOPS _UxGT("Endstopy") // max 8 znakov
#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft. endstopy")
#define MSG_MAIN _UxGT("Hlavná ponuka")
@ -100,6 +105,7 @@
#define MSG_LEVEL_BED _UxGT("Vyrovnať podložku")
#define MSG_LEVEL_CORNERS _UxGT("Vyrovnať rohy")
#define MSG_NEXT_CORNER _UxGT("Ďalší roh")
#define MSG_MESH_EDITOR _UxGT("Editor sieťe bodov")
#define MSG_EDIT_MESH _UxGT("Upraviť sieť bodov")
#define MSG_EDITING_STOPPED _UxGT("Koniec úprav siete")
#define MSG_PROBING_MESH _UxGT("Skúšam bod")
@ -149,6 +155,13 @@
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Kontrola siete " PREHEAT_1_LABEL)
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Kontrola siete " PREHEAT_2_LABEL)
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Kontrola vlast.siete")
#define MSG_G26_HEATING_BED _UxGT("G26 ohrev podlž.")
#define MSG_G26_HEATING_NOZZLE _UxGT("G26 ohrev trysky")
#define MSG_G26_MANUAL_PRIME _UxGT("Ručné čistenie...")
#define MSG_G26_FIXED_LENGTH _UxGT("Čistenie pevn. dĺž.")
#define MSG_G26_PRIME_DONE _UxGT("Čistenie dokončené")
#define MSG_G26_CANCELED _UxGT("G26 zrušený")
#define MSG_G26_LEAVING _UxGT("Opúšťam G26")
#define MSG_UBL_CONTINUE_MESH _UxGT("Pokračovať v sieti")
#define MSG_UBL_MESH_LEVELING _UxGT("Sieťové rovnanie")
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-bodové rovnanie")
@ -178,6 +191,7 @@
#define MSG_UBL_NO_STORAGE _UxGT("Nedostatok miesta")
#define MSG_UBL_SAVE_ERROR _UxGT("Chyba: Ukladanie UBL")
#define MSG_UBL_RESTORE_ERROR _UxGT("Chyba: Obnovenie UBL")
#define MSG_UBL_Z_OFFSET _UxGT("Z-Ofset: ")
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Koniec kompenz. Z")
#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Postupné UBL")
@ -413,6 +427,8 @@
#define MSG_INFO_EXTRUDERS _UxGT("Extrudéry")
#define MSG_INFO_BAUDRATE _UxGT("Rýchlosť")
#define MSG_INFO_PROTOCOL _UxGT("Protokol")
#define MSG_INFO_RUNAWAY_OFF _UxGT("Tepl. ochrana: VYP")
#define MSG_INFO_RUNAWAY_ON _UxGT("Tepl. ochrana: ZAP")
#define MSG_CASE_LIGHT _UxGT("Osvetlenie")
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Jas svetla")
@ -437,8 +453,10 @@
#define MSG_INFO_PSU _UxGT("Nap. zdroj")
#define MSG_DRIVE_STRENGTH _UxGT("Budenie motorov")
#define MSG_DAC_PERCENT _UxGT("Motor %")
#define MSG_ERROR_TMC _UxGT("CHYBA KOMUNIKÁ. TMC")
#define MSG_DAC_EEPROM_WRITE _UxGT("Uložiť do EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("VÝMENA FILAMENTU")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("PAUZA TLAČE")
#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("ZAVEDENIE FILAMENTU")
#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("VYSUNUTIE FILAMENTU")