Update configs with all the latest
This commit is contained in:
parent
5e82ed4f30
commit
ba2c7cb467
23 changed files with 2714 additions and 1512 deletions
|
@ -104,7 +104,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
//
|
||||||
|
@ -118,7 +118,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
// 1010 is Pt1000 with 1k pullup (non standard)
|
||||||
// 147 is Pt100 with 4k7 pullup
|
// 147 is Pt100 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
// 110 is Pt100 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
// Use it for Testing or Development purposes. NEVER for production machine.
|
||||||
// #define DUMMY_THERMISTOR_998_VALUE 25
|
// #define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
// #define DUMMY_THERMISTOR_999_VALUE 100
|
// #define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
@ -264,15 +264,15 @@ The issue: If a thermistor come off, it will read a lower temperature than actua
|
||||||
The system will turn the heater on forever, burning up the filament and anything
|
The system will turn the heater on forever, burning up the filament and anything
|
||||||
else around.
|
else around.
|
||||||
|
|
||||||
After the temperature reaches the target for the first time, this feature will
|
After the temperature reaches the target for the first time, this feature will
|
||||||
start measuring for how long the current temperature stays below the target
|
start measuring for how long the current temperature stays below the target
|
||||||
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
||||||
|
|
||||||
If it stays longer than _PERIOD, it means the thermistor temperature
|
If it stays longer than _PERIOD, it means the thermistor temperature
|
||||||
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
||||||
safe side, the system will he halt.
|
safe side, the system will he halt.
|
||||||
|
|
||||||
Bear in mind the count down will just start AFTER the first time the
|
Bear in mind the count down will just start AFTER the first time the
|
||||||
thermistor temperature is over the target, so you will have no problem if
|
thermistor temperature is over the target, so you will have no problem if
|
||||||
your extruder heater takes 2 minutes to hit the target on heating.
|
your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
|
|
||||||
|
@ -338,7 +338,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
#define DISABLE_E false // For all extruders
|
#define DISABLE_E false // For all extruders
|
||||||
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
||||||
|
|
||||||
// If you motor turns to wrong direction, you can invert it here:
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||||
#define INVERT_X_DIR false
|
#define INVERT_X_DIR false
|
||||||
#define INVERT_Y_DIR false
|
#define INVERT_Y_DIR false
|
||||||
#define INVERT_Z_DIR false
|
#define INVERT_Z_DIR false
|
||||||
|
@ -421,14 +421,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
#define RIGHT_PROBE_BED_POSITION 170
|
#define RIGHT_PROBE_BED_POSITION 170
|
||||||
#define FRONT_PROBE_BED_POSITION 20
|
#define FRONT_PROBE_BED_POSITION 20
|
||||||
#define BACK_PROBE_BED_POSITION 170
|
#define BACK_PROBE_BED_POSITION 170
|
||||||
|
|
||||||
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
||||||
|
|
||||||
// Set the number of grid points per dimension
|
// Set the number of grid points per dimension
|
||||||
// You probably don't need more than 3 (squared=9)
|
// You probably don't need more than 3 (squared=9)
|
||||||
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
||||||
|
|
||||||
|
|
||||||
#else // !AUTO_BED_LEVELING_GRID
|
#else // !AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
// Arbitrary points to probe. A simple cross-product
|
// Arbitrary points to probe. A simple cross-product
|
||||||
|
@ -442,7 +441,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
|
|
||||||
#endif // AUTO_BED_LEVELING_GRID
|
#endif // AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
|
|
||||||
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
||||||
// X and Y offsets must be integers
|
// X and Y offsets must be integers
|
||||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Probe on: -left +right
|
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Probe on: -left +right
|
||||||
|
@ -454,7 +452,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
|
|
||||||
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
||||||
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
||||||
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
||||||
|
|
||||||
|
@ -572,7 +570,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
// See also language.h
|
// See also language.h
|
||||||
#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
||||||
|
|
||||||
// Chose ONE of the next three charsets. This has to match your hardware. In case of a full graphic display this information is not important.
|
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
||||||
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
||||||
// See also documentation/LCDLanguageFont.md
|
// See also documentation/LCDLanguageFont.md
|
||||||
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||||
|
@ -645,7 +643,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
// Shift register panels
|
// Shift register panels
|
||||||
// ---------------------
|
// ---------------------
|
||||||
// 2 wire Non-latching LCD SR from:
|
// 2 wire Non-latching LCD SR from:
|
||||||
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
||||||
|
|
||||||
//#define SAV_3DLCD
|
//#define SAV_3DLCD
|
||||||
|
|
||||||
|
@ -653,7 +651,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
//#define FAST_PWM_FAN
|
//#define FAST_PWM_FAN
|
||||||
|
|
||||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||||
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
|
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||||
//#define FAN_SOFT_PWM
|
//#define FAN_SOFT_PWM
|
||||||
|
|
||||||
|
@ -707,9 +705,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
* Support for a filament diameter sensor
|
* Support for a filament diameter sensor
|
||||||
* Also allows adjustment of diameter at print time (vs at slicing)
|
* Also allows adjustment of diameter at print time (vs at slicing)
|
||||||
* Single extruder only at this point (extruder 0)
|
* Single extruder only at this point (extruder 0)
|
||||||
*
|
*
|
||||||
* Motherboards
|
* Motherboards
|
||||||
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
||||||
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
||||||
* 301 - Rambo - uses Analog input 3
|
* 301 - Rambo - uses Analog input 3
|
||||||
* Note may require analog pins to be defined for different motherboards
|
* Note may require analog pins to be defined for different motherboards
|
||||||
|
@ -726,7 +724,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM)
|
#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM)
|
||||||
|
|
||||||
//defines used in the code
|
//defines used in the code
|
||||||
#define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially
|
#define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially
|
||||||
|
|
||||||
//When using an LCD, uncomment the line below to display the Filament sensor data on the last line instead of status. Status will appear for 5 sec.
|
//When using an LCD, uncomment the line below to display the Filament sensor data on the last line instead of status. Status will appear for 5 sec.
|
||||||
//#define FILAMENT_LCD_DISPLAY
|
//#define FILAMENT_LCD_DISPLAY
|
||||||
|
|
|
@ -102,28 +102,27 @@
|
||||||
|
|
||||||
#ifdef Z_DUAL_STEPPER_DRIVERS
|
#ifdef Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
// Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper.
|
// Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper.
|
||||||
// That way the machine is capable to align the bed during home, since both Z steppers are homed.
|
// That way the machine is capable to align the bed during home, since both Z steppers are homed.
|
||||||
// There is also an implementation of M666 (software endstops adjustment) to this feature.
|
// There is also an implementation of M666 (software endstops adjustment) to this feature.
|
||||||
// After Z homing, this adjustment is applied to just one of the steppers in order to align the bed.
|
// After Z homing, this adjustment is applied to just one of the steppers in order to align the bed.
|
||||||
// One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2.
|
// One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2.
|
||||||
// If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive.
|
// If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive.
|
||||||
// Play a little bit with small adjustments (0.5mm) and check the behaviour.
|
// Play a little bit with small adjustments (0.5mm) and check the behaviour.
|
||||||
// The M119 (endstops report) will start reporting the Z2 Endstop as well.
|
// The M119 (endstops report) will start reporting the Z2 Endstop as well.
|
||||||
|
|
||||||
#define Z_DUAL_ENDSTOPS
|
#define Z_DUAL_ENDSTOPS
|
||||||
|
|
||||||
#ifdef Z_DUAL_ENDSTOPS
|
#ifdef Z_DUAL_ENDSTOPS
|
||||||
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
|
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
|
||||||
#define Z2_DIR_PIN E2_DIR_PIN
|
#define Z2_DIR_PIN E2_DIR_PIN
|
||||||
#define Z2_ENABLE_PIN E2_ENABLE_PIN
|
#define Z2_ENABLE_PIN E2_ENABLE_PIN
|
||||||
#define Z2_MAX_PIN 36 //Endstop used for Z2 axis. In this case I'm using XMAX in a Rumba Board (pin 36)
|
#define Z2_MAX_PIN 36 //Endstop used for Z2 axis. In this case I'm using XMAX in a Rumba Board (pin 36)
|
||||||
const bool Z2_MAX_ENDSTOP_INVERTING = false;
|
const bool Z2_MAX_ENDSTOP_INVERTING = false;
|
||||||
#define DISABLE_XMAX_ENDSTOP //Better to disable the XMAX to avoid conflict. Just rename "XMAX_ENDSTOP" by the endstop you are using for Z2 axis.
|
#define DISABLE_XMAX_ENDSTOP //Better to disable the XMAX to avoid conflict. Just rename "XMAX_ENDSTOP" by the endstop you are using for Z2 axis.
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#endif // Z_DUAL_STEPPER_DRIVERS
|
||||||
#endif
|
|
||||||
|
|
||||||
// Same again but for Y Axis.
|
// Same again but for Y Axis.
|
||||||
//#define Y_DUAL_STEPPER_DRIVERS
|
//#define Y_DUAL_STEPPER_DRIVERS
|
||||||
|
@ -242,27 +241,37 @@
|
||||||
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
||||||
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
||||||
|
|
||||||
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
#ifdef SDSUPPORT
|
||||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
|
||||||
|
|
||||||
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
||||||
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
||||||
// using:
|
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
||||||
//#define MENU_ADDAUTOSTART
|
// be commented out otherwise
|
||||||
|
#define SDCARDDETECTINVERTED
|
||||||
|
|
||||||
// Show a progress bar on HD44780 LCDs for SD printing
|
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||||
//#define LCD_PROGRESS_BAR
|
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
||||||
|
|
||||||
#ifdef LCD_PROGRESS_BAR
|
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
||||||
// Amount of time (ms) to show the bar
|
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
||||||
#define PROGRESS_BAR_BAR_TIME 2000
|
// using:
|
||||||
// Amount of time (ms) to show the status message
|
//#define MENU_ADDAUTOSTART
|
||||||
#define PROGRESS_BAR_MSG_TIME 3000
|
|
||||||
// Amount of time (ms) to retain the status message (0=forever)
|
// Show a progress bar on HD44780 LCDs for SD printing
|
||||||
#define PROGRESS_MSG_EXPIRE 0
|
//#define LCD_PROGRESS_BAR
|
||||||
// Enable this to show messages for MSG_TIME then hide them
|
|
||||||
//#define PROGRESS_MSG_ONCE
|
#ifdef LCD_PROGRESS_BAR
|
||||||
#endif
|
// Amount of time (ms) to show the bar
|
||||||
|
#define PROGRESS_BAR_BAR_TIME 2000
|
||||||
|
// Amount of time (ms) to show the status message
|
||||||
|
#define PROGRESS_BAR_MSG_TIME 3000
|
||||||
|
// Amount of time (ms) to retain the status message (0=forever)
|
||||||
|
#define PROGRESS_MSG_EXPIRE 0
|
||||||
|
// Enable this to show messages for MSG_TIME then hide them
|
||||||
|
//#define PROGRESS_MSG_ONCE
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
|
|
||||||
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||||
//#define USE_WATCHDOG
|
//#define USE_WATCHDOG
|
||||||
|
@ -300,7 +309,7 @@
|
||||||
#define EXTRUDER_ADVANCE_K .0
|
#define EXTRUDER_ADVANCE_K .0
|
||||||
#define D_FILAMENT 2.85
|
#define D_FILAMENT 2.85
|
||||||
#define STEPS_MM_E 836
|
#define STEPS_MM_E 836
|
||||||
#endif // ADVANCE
|
#endif
|
||||||
|
|
||||||
// Arc interpretation settings:
|
// Arc interpretation settings:
|
||||||
#define MM_PER_ARC_SEGMENT 1
|
#define MM_PER_ARC_SEGMENT 1
|
||||||
|
@ -308,12 +317,6 @@
|
||||||
|
|
||||||
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
||||||
|
|
||||||
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
|
||||||
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
|
||||||
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
|
||||||
// be commented out otherwise
|
|
||||||
#define SDCARDDETECTINVERTED
|
|
||||||
|
|
||||||
// Control heater 0 and heater 1 in parallel.
|
// Control heater 0 and heater 1 in parallel.
|
||||||
//#define HEATERS_PARALLEL
|
//#define HEATERS_PARALLEL
|
||||||
|
|
||||||
|
|
|
@ -113,7 +113,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
//
|
||||||
|
@ -127,7 +127,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
// 1010 is Pt1000 with 1k pullup (non standard)
|
||||||
// 147 is Pt100 with 4k7 pullup
|
// 147 is Pt100 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
// 110 is Pt100 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
// Use it for Testing or Development purposes. NEVER for production machine.
|
||||||
// #define DUMMY_THERMISTOR_998_VALUE 25
|
// #define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
// #define DUMMY_THERMISTOR_999_VALUE 100
|
// #define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
@ -274,15 +274,15 @@ The issue: If a thermistor come off, it will read a lower temperature than actua
|
||||||
The system will turn the heater on forever, burning up the filament and anything
|
The system will turn the heater on forever, burning up the filament and anything
|
||||||
else around.
|
else around.
|
||||||
|
|
||||||
After the temperature reaches the target for the first time, this feature will
|
After the temperature reaches the target for the first time, this feature will
|
||||||
start measuring for how long the current temperature stays below the target
|
start measuring for how long the current temperature stays below the target
|
||||||
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
||||||
|
|
||||||
If it stays longer than _PERIOD, it means the thermistor temperature
|
If it stays longer than _PERIOD, it means the thermistor temperature
|
||||||
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
||||||
safe side, the system will he halt.
|
safe side, the system will he halt.
|
||||||
|
|
||||||
Bear in mind the count down will just start AFTER the first time the
|
Bear in mind the count down will just start AFTER the first time the
|
||||||
thermistor temperature is over the target, so you will have no problem if
|
thermistor temperature is over the target, so you will have no problem if
|
||||||
your extruder heater takes 2 minutes to hit the target on heating.
|
your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
|
|
||||||
|
@ -329,13 +329,13 @@ your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
// #define ENDSTOPPULLUP_ZMIN
|
// #define ENDSTOPPULLUP_ZMIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
//#define DISABLE_MAX_ENDSTOPS
|
//#define DISABLE_MAX_ENDSTOPS
|
||||||
//#define DISABLE_MIN_ENDSTOPS
|
//#define DISABLE_MIN_ENDSTOPS
|
||||||
|
|
||||||
|
@ -361,17 +361,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
// @section machine
|
// @section machine
|
||||||
|
|
||||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||||
#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
|
#define INVERT_X_DIR true
|
||||||
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
|
#define INVERT_Y_DIR false
|
||||||
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
|
#define INVERT_Z_DIR true
|
||||||
|
|
||||||
// @section extruder
|
// @section extruder
|
||||||
|
|
||||||
// For direct drive extruder v9 set to true, for geared extruder set to false.
|
// For direct drive extruder v9 set to true, for geared extruder set to false.
|
||||||
#define INVERT_E0_DIR false // Direct drive extruder v9: true. Geared extruder: false
|
#define INVERT_E0_DIR false
|
||||||
#define INVERT_E1_DIR false // Direct drive extruder v9: true. Geared extruder: false
|
#define INVERT_E1_DIR false
|
||||||
#define INVERT_E2_DIR false // Direct drive extruder v9: true. Geared extruder: false
|
#define INVERT_E2_DIR false
|
||||||
#define INVERT_E3_DIR false // Direct drive extruder v9: true. Geared extruder: false
|
#define INVERT_E3_DIR false
|
||||||
|
|
||||||
// @section homing
|
// @section homing
|
||||||
|
|
||||||
|
@ -455,11 +455,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define FRONT_PROBE_BED_POSITION 20
|
#define FRONT_PROBE_BED_POSITION 20
|
||||||
#define BACK_PROBE_BED_POSITION 170
|
#define BACK_PROBE_BED_POSITION 170
|
||||||
|
|
||||||
|
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
||||||
|
|
||||||
// Set the number of grid points per dimension
|
// Set the number of grid points per dimension
|
||||||
// You probably don't need more than 3 (squared=9)
|
// You probably don't need more than 3 (squared=9)
|
||||||
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
||||||
|
|
||||||
|
|
||||||
#else // !AUTO_BED_LEVELING_GRID
|
#else // !AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
// Arbitrary points to probe. A simple cross-product
|
// Arbitrary points to probe. A simple cross-product
|
||||||
|
@ -473,11 +474,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#endif // AUTO_BED_LEVELING_GRID
|
#endif // AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
|
|
||||||
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
||||||
// X and Y offsets must be integers
|
// X and Y offsets must be integers
|
||||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // -left +right
|
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Probe on: -left +right
|
||||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // -front +behind
|
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Probe on: -front +behind
|
||||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
||||||
|
@ -485,9 +485,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
||||||
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
||||||
|
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
||||||
|
|
||||||
|
// #define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" //These commands will be executed in the end of G29 routine.
|
||||||
|
//Useful to retract a deployable probe.
|
||||||
|
|
||||||
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
||||||
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
@ -571,8 +575,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#ifdef CUSTOM_M_CODES
|
#ifdef CUSTOM_M_CODES
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
||||||
#define Z_PROBE_OFFSET_RANGE_MIN -15
|
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||||
#define Z_PROBE_OFFSET_RANGE_MAX -5
|
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -604,13 +608,16 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
// @section lcd
|
// @section lcd
|
||||||
|
|
||||||
// Define your display language below. Replace (en) with your language code and uncomment.
|
// Define your display language below. Replace (en) with your language code and uncomment.
|
||||||
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu
|
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu, kana, kana_utf8, test
|
||||||
// See also language.h
|
// See also language.h
|
||||||
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
||||||
|
|
||||||
// Character based displays can have different extended charsets.
|
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
||||||
#define DISPLAY_CHARSET_HD44780_JAPAN // "ääööüüß23°"
|
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
||||||
//#define DISPLAY_CHARSET_HD44780_WESTERN // "ÄäÖöÜüß²³°" if you see a '~' instead of a 'arrow_right' at the right of submenuitems - this is the right one.
|
// See also documentation/LCDLanguageFont.md
|
||||||
|
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_WESTERN
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_CYRILLIC
|
||||||
|
|
||||||
//#define ULTRA_LCD //general LCD support, also 16x2
|
//#define ULTRA_LCD //general LCD support, also 16x2
|
||||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||||
|
@ -623,6 +630,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||||
|
// 0 to disable buzzer feedback
|
||||||
|
|
||||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||||
// http://reprap.org/wiki/PanelOne
|
// http://reprap.org/wiki/PanelOne
|
||||||
|
@ -677,7 +685,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
// Shift register panels
|
// Shift register panels
|
||||||
// ---------------------
|
// ---------------------
|
||||||
// 2 wire Non-latching LCD SR from:
|
// 2 wire Non-latching LCD SR from:
|
||||||
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
||||||
|
|
||||||
//#define SAV_3DLCD
|
//#define SAV_3DLCD
|
||||||
|
|
||||||
|
@ -687,7 +695,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define FAST_PWM_FAN
|
//#define FAST_PWM_FAN
|
||||||
|
|
||||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||||
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
|
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||||
//#define FAN_SOFT_PWM
|
//#define FAN_SOFT_PWM
|
||||||
|
|
||||||
|
@ -741,9 +749,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
* Support for a filament diameter sensor
|
* Support for a filament diameter sensor
|
||||||
* Also allows adjustment of diameter at print time (vs at slicing)
|
* Also allows adjustment of diameter at print time (vs at slicing)
|
||||||
* Single extruder only at this point (extruder 0)
|
* Single extruder only at this point (extruder 0)
|
||||||
*
|
*
|
||||||
* Motherboards
|
* Motherboards
|
||||||
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
||||||
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
||||||
* 301 - Rambo - uses Analog input 3
|
* 301 - Rambo - uses Analog input 3
|
||||||
* Note may require analog pins to be defined for different motherboards
|
* Note may require analog pins to be defined for different motherboards
|
||||||
|
|
|
@ -112,6 +112,30 @@
|
||||||
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
||||||
//#define Z_DUAL_STEPPER_DRIVERS
|
//#define Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
// Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper.
|
||||||
|
// That way the machine is capable to align the bed during home, since both Z steppers are homed.
|
||||||
|
// There is also an implementation of M666 (software endstops adjustment) to this feature.
|
||||||
|
// After Z homing, this adjustment is applied to just one of the steppers in order to align the bed.
|
||||||
|
// One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2.
|
||||||
|
// If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive.
|
||||||
|
// Play a little bit with small adjustments (0.5mm) and check the behaviour.
|
||||||
|
// The M119 (endstops report) will start reporting the Z2 Endstop as well.
|
||||||
|
|
||||||
|
#define Z_DUAL_ENDSTOPS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_ENDSTOPS
|
||||||
|
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
|
||||||
|
#define Z2_DIR_PIN E2_DIR_PIN
|
||||||
|
#define Z2_ENABLE_PIN E2_ENABLE_PIN
|
||||||
|
#define Z2_MAX_PIN 36 //Endstop used for Z2 axis. In this case I'm using XMAX in a Rumba Board (pin 36)
|
||||||
|
const bool Z2_MAX_ENDSTOP_INVERTING = false;
|
||||||
|
#define DISABLE_XMAX_ENDSTOP //Better to disable the XMAX to avoid conflict. Just rename "XMAX_ENDSTOP" by the endstop you are using for Z2 axis.
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
// Same again but for Y Axis.
|
// Same again but for Y Axis.
|
||||||
//#define Y_DUAL_STEPPER_DRIVERS
|
//#define Y_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
@ -124,41 +148,41 @@
|
||||||
// allowing faster printing speeds.
|
// allowing faster printing speeds.
|
||||||
//#define DUAL_X_CARRIAGE
|
//#define DUAL_X_CARRIAGE
|
||||||
#ifdef DUAL_X_CARRIAGE
|
#ifdef DUAL_X_CARRIAGE
|
||||||
// Configuration for second X-carriage
|
// Configuration for second X-carriage
|
||||||
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
||||||
// the second x-carriage always homes to the maximum endstop.
|
// the second x-carriage always homes to the maximum endstop.
|
||||||
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||||
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
||||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||||
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
||||||
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
||||||
// without modifying the firmware (through the "M218 T1 X???" command).
|
// without modifying the firmware (through the "M218 T1 X???" command).
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
||||||
#define X2_ENABLE_PIN 29
|
#define X2_ENABLE_PIN 29
|
||||||
#define X2_STEP_PIN 25
|
#define X2_STEP_PIN 25
|
||||||
#define X2_DIR_PIN 23
|
#define X2_DIR_PIN 23
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
||||||
|
|
||||||
// Default settings in "Auto-park Mode"
|
// Default settings in "Auto-park Mode"
|
||||||
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
||||||
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
||||||
|
|
||||||
// Default x offset in duplication mode (typically set to half print bed width)
|
// Default x offset in duplication mode (typically set to half print bed width)
|
||||||
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
||||||
|
|
||||||
#endif //DUAL_X_CARRIAGE
|
#endif //DUAL_X_CARRIAGE
|
||||||
|
|
||||||
|
@ -168,6 +192,7 @@
|
||||||
#define X_HOME_RETRACT_MM 5
|
#define X_HOME_RETRACT_MM 5
|
||||||
#define Y_HOME_RETRACT_MM 5
|
#define Y_HOME_RETRACT_MM 5
|
||||||
#define Z_HOME_RETRACT_MM 2
|
#define Z_HOME_RETRACT_MM 2
|
||||||
|
#define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||||
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
||||||
|
|
||||||
// @section machine
|
// @section machine
|
||||||
|
@ -231,8 +256,8 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
||||||
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
|
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
|
||||||
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
|
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
|
||||||
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
||||||
|
|
||||||
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
||||||
|
@ -240,27 +265,37 @@
|
||||||
|
|
||||||
// @section lcd
|
// @section lcd
|
||||||
|
|
||||||
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
#ifdef SDSUPPORT
|
||||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
|
||||||
|
|
||||||
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
||||||
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
||||||
// using:
|
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
||||||
//#define MENU_ADDAUTOSTART
|
// be commented out otherwise
|
||||||
|
#define SDCARDDETECTINVERTED
|
||||||
|
|
||||||
// Show a progress bar on HD44780 LCDs for SD printing
|
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||||
//#define LCD_PROGRESS_BAR
|
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
||||||
|
|
||||||
#ifdef LCD_PROGRESS_BAR
|
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
||||||
// Amount of time (ms) to show the bar
|
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
||||||
#define PROGRESS_BAR_BAR_TIME 2000
|
// using:
|
||||||
// Amount of time (ms) to show the status message
|
//#define MENU_ADDAUTOSTART
|
||||||
#define PROGRESS_BAR_MSG_TIME 3000
|
|
||||||
// Amount of time (ms) to retain the status message (0=forever)
|
// Show a progress bar on HD44780 LCDs for SD printing
|
||||||
#define PROGRESS_MSG_EXPIRE 0
|
//#define LCD_PROGRESS_BAR
|
||||||
// Enable this to show messages for MSG_TIME then hide them
|
|
||||||
//#define PROGRESS_MSG_ONCE
|
#ifdef LCD_PROGRESS_BAR
|
||||||
#endif
|
// Amount of time (ms) to show the bar
|
||||||
|
#define PROGRESS_BAR_BAR_TIME 2000
|
||||||
|
// Amount of time (ms) to show the status message
|
||||||
|
#define PROGRESS_BAR_MSG_TIME 3000
|
||||||
|
// Amount of time (ms) to retain the status message (0=forever)
|
||||||
|
#define PROGRESS_MSG_EXPIRE 0
|
||||||
|
// Enable this to show messages for MSG_TIME then hide them
|
||||||
|
//#define PROGRESS_MSG_ONCE
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
|
|
||||||
// @section more
|
// @section more
|
||||||
|
|
||||||
|
@ -298,12 +333,8 @@
|
||||||
|
|
||||||
#ifdef ADVANCE
|
#ifdef ADVANCE
|
||||||
#define EXTRUDER_ADVANCE_K .0
|
#define EXTRUDER_ADVANCE_K .0
|
||||||
|
|
||||||
#define D_FILAMENT 2.85
|
#define D_FILAMENT 2.85
|
||||||
#define STEPS_MM_E 836
|
#define STEPS_MM_E 836
|
||||||
#define EXTRUSION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159)
|
|
||||||
#define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUSION_AREA)
|
|
||||||
|
|
||||||
#endif // ADVANCE
|
#endif // ADVANCE
|
||||||
|
|
||||||
// Arc interpretation settings:
|
// Arc interpretation settings:
|
||||||
|
@ -312,14 +343,6 @@
|
||||||
|
|
||||||
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
||||||
|
|
||||||
// @section lcd
|
|
||||||
|
|
||||||
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
|
||||||
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
|
||||||
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
|
||||||
// be commented out otherwise
|
|
||||||
#define SDCARDDETECTINVERTED
|
|
||||||
|
|
||||||
// @section temperature
|
// @section temperature
|
||||||
|
|
||||||
// Control heater 0 and heater 1 in parallel.
|
// Control heater 0 and heater 1 in parallel.
|
||||||
|
@ -333,7 +356,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
|
|
||||||
// The number of linear motions that can be in the plan at any give time.
|
// The number of linear motions that can be in the plan at any give time.
|
||||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
||||||
#if defined SDSUPPORT
|
#ifdef SDSUPPORT
|
||||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||||
#else
|
#else
|
||||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||||
|
@ -377,6 +400,139 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have TMC26X motor drivers.
|
||||||
|
* you need to import the TMC26XStepper library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_TMCDRIVER
|
||||||
|
#ifdef HAVE_TMCDRIVER
|
||||||
|
|
||||||
|
// #define X_IS_TMC
|
||||||
|
#define X_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define X2_IS_TMC
|
||||||
|
#define X2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y_IS_TMC
|
||||||
|
#define Y_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y2_IS_TMC
|
||||||
|
#define Y2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z_IS_TMC
|
||||||
|
#define Z_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z2_IS_TMC
|
||||||
|
#define Z2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E0_IS_TMC
|
||||||
|
#define E0_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E0_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E1_IS_TMC
|
||||||
|
#define E1_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E1_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E2_IS_TMC
|
||||||
|
#define E2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E3_IS_TMC
|
||||||
|
#define E3_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E3_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have L6470 motor drivers.
|
||||||
|
* you need to import the L6470 library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_L6470DRIVER
|
||||||
|
#ifdef HAVE_L6470DRIVER
|
||||||
|
|
||||||
|
// #define X_IS_L6470
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define X2_IS_L6470
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y_IS_L6470
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y2_IS_L6470
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z_IS_L6470
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z2_IS_L6470
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E0_IS_L6470
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E1_IS_L6470
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E2_IS_L6470
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E3_IS_L6470
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
#include "Conditionals.h"
|
#include "Conditionals.h"
|
||||||
#include "SanityCheck.h"
|
#include "SanityCheck.h"
|
||||||
|
|
||||||
|
|
|
@ -264,24 +264,27 @@ your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
// uncomment the 2 defines below:
|
// uncomment the 2 defines below:
|
||||||
|
|
||||||
// Parameters for all extruder heaters
|
// Parameters for all extruder heaters
|
||||||
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 60 //in seconds
|
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
|
||||||
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 5 // in degree Celsius
|
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
|
||||||
|
|
||||||
// If you want to enable this feature for your bed heater,
|
// If you want to enable this feature for your bed heater,
|
||||||
// uncomment the 2 defines below:
|
// uncomment the 2 defines below:
|
||||||
|
|
||||||
// Parameters for the bed heater
|
// Parameters for the bed heater
|
||||||
//#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD 30 //in seconds
|
//#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD 20 //in seconds
|
||||||
//#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS 5// in degree Celsius
|
//#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS 2 // in degree Celsius
|
||||||
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Mechanical Settings =========================
|
//============================= Mechanical Settings =========================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
// Uncomment the following line to enable CoreXY kinematics
|
// Uncomment this option to enable CoreXY kinematics
|
||||||
// #define COREXY
|
// #define COREXY
|
||||||
|
|
||||||
|
// Enable this option for Toshiba steppers
|
||||||
|
// #define CONFIG_STEPPERS_TOSHIBA
|
||||||
|
|
||||||
// coarse Endstop Settings
|
// coarse Endstop Settings
|
||||||
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
|
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
|
||||||
|
|
||||||
|
@ -295,7 +298,7 @@ your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
// #define ENDSTOPPULLUP_ZMIN
|
// #define ENDSTOPPULLUP_ZMIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
|
@ -318,13 +321,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define DISABLE_E false // For all extruders
|
#define DISABLE_E false // For all extruders
|
||||||
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
||||||
|
|
||||||
#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||||
#define INVERT_Y_DIR true // for Mendel set to true, for Orca set to false
|
#define INVERT_X_DIR true
|
||||||
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
|
#define INVERT_Y_DIR true
|
||||||
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_Z_DIR true
|
||||||
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E0_DIR false
|
||||||
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E1_DIR false
|
||||||
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E2_DIR false
|
||||||
|
#define INVERT_E3_DIR false
|
||||||
|
|
||||||
// ENDSTOP SETTINGS:
|
// ENDSTOP SETTINGS:
|
||||||
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
||||||
|
@ -336,12 +340,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
||||||
|
|
||||||
// Travel limits after homing (units are in mm)
|
// Travel limits after homing (units are in mm)
|
||||||
#define X_MAX_POS 255
|
|
||||||
#define X_MIN_POS 0
|
#define X_MIN_POS 0
|
||||||
#define Y_MAX_POS 205
|
|
||||||
#define Y_MIN_POS 0
|
#define Y_MIN_POS 0
|
||||||
#define Z_MAX_POS 235
|
|
||||||
#define Z_MIN_POS 0
|
#define Z_MIN_POS 0
|
||||||
|
#define X_MAX_POS 255
|
||||||
|
#define Y_MAX_POS 205
|
||||||
|
#define Z_MAX_POS 235
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Filament Runout Sensor ======================
|
//============================= Filament Runout Sensor ======================
|
||||||
|
@ -379,39 +383,38 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
|
|
||||||
// There are 2 different ways to pick the X and Y locations to probe:
|
// There are 2 different ways to specify probing locations
|
||||||
|
//
|
||||||
// - "grid" mode
|
// - "grid" mode
|
||||||
// Probe every point in a rectangular grid
|
// Probe several points in a rectangular grid.
|
||||||
// You must specify the rectangle, and the density of sample points
|
// You specify the rectangle and the density of sample points.
|
||||||
// This mode is preferred because there are more measurements.
|
// This mode is preferred because there are more measurements.
|
||||||
// It used to be called ACCURATE_BED_LEVELING but "grid" is more descriptive
|
//
|
||||||
|
// - "3-point" mode
|
||||||
// - "3-point" mode
|
// Probe 3 arbitrary points on the bed (that aren't colinear)
|
||||||
// Probe 3 arbitrary points on the bed (that aren't colinear)
|
// You specify the XY coordinates of all 3 points.
|
||||||
// You must specify the X & Y coordinates of all 3 points
|
|
||||||
|
|
||||||
|
// Enable this to sample the bed in a grid (least squares solution)
|
||||||
|
// Note: this feature generates 10KB extra code size
|
||||||
#define AUTO_BED_LEVELING_GRID
|
#define AUTO_BED_LEVELING_GRID
|
||||||
// with AUTO_BED_LEVELING_GRID, the bed is sampled in a
|
|
||||||
// AUTO_BED_LEVELING_GRID_POINTSxAUTO_BED_LEVELING_GRID_POINTS grid
|
|
||||||
// and least squares solution is calculated
|
|
||||||
// Note: this feature occupies 10'206 byte
|
|
||||||
#ifdef AUTO_BED_LEVELING_GRID
|
#ifdef AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
#define LEFT_PROBE_BED_POSITION 15
|
#define LEFT_PROBE_BED_POSITION 15
|
||||||
#define RIGHT_PROBE_BED_POSITION 170
|
#define RIGHT_PROBE_BED_POSITION 170
|
||||||
#define BACK_PROBE_BED_POSITION 180
|
|
||||||
#define FRONT_PROBE_BED_POSITION 20
|
#define FRONT_PROBE_BED_POSITION 20
|
||||||
|
#define BACK_PROBE_BED_POSITION 180
|
||||||
|
|
||||||
// set the number of grid points per dimension
|
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
||||||
// I wouldn't see a reason to go above 3 (=9 probing points on the bed)
|
|
||||||
|
// Set the number of grid points per dimension
|
||||||
|
// You probably don't need more than 3 (squared=9)
|
||||||
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
||||||
|
|
||||||
|
#else // !AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
#else // not AUTO_BED_LEVELING_GRID
|
// Arbitrary points to probe. A simple cross-product
|
||||||
// with no grid, just probe 3 arbitrary points. A simple cross-product
|
// is used to estimate the plane of the bed.
|
||||||
// is used to esimate the plane of the print bed
|
|
||||||
|
|
||||||
#define ABL_PROBE_PT_1_X 15
|
#define ABL_PROBE_PT_1_X 15
|
||||||
#define ABL_PROBE_PT_1_Y 180
|
#define ABL_PROBE_PT_1_Y 180
|
||||||
#define ABL_PROBE_PT_2_X 15
|
#define ABL_PROBE_PT_2_X 15
|
||||||
|
@ -421,21 +424,24 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#endif // AUTO_BED_LEVELING_GRID
|
#endif // AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
|
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
||||||
// these are the offsets to the probe relative to the extruder tip (Hotend - Probe)
|
|
||||||
// X and Y offsets must be integers
|
// X and Y offsets must be integers
|
||||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -25
|
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Probe on: -left +right
|
||||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29
|
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Probe on: -front +behind
|
||||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35
|
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
||||||
// Be sure you have this distance over your Z_MAX_POS in case
|
// Be sure you have this distance over your Z_MAX_POS in case
|
||||||
|
|
||||||
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
||||||
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
||||||
|
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
||||||
|
|
||||||
|
// #define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" //These commands will be executed in the end of G29 routine.
|
||||||
|
//Useful to retract a deployable probe.
|
||||||
|
|
||||||
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
||||||
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
@ -470,12 +476,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
||||||
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
||||||
|
|
||||||
//Manual homing switch locations:
|
// Manual homing switch locations:
|
||||||
// For deltabots this means top and center of the Cartesian print volume.
|
// For deltabots this means top and center of the Cartesian print volume.
|
||||||
#define MANUAL_X_HOME_POS 0
|
#ifdef MANUAL_HOME_POSITIONS
|
||||||
#define MANUAL_Y_HOME_POS 0
|
#define MANUAL_X_HOME_POS 0
|
||||||
#define MANUAL_Z_HOME_POS 0
|
#define MANUAL_Y_HOME_POS 0
|
||||||
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
#define MANUAL_Z_HOME_POS 0
|
||||||
|
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
||||||
|
#endif
|
||||||
|
|
||||||
//// MOVEMENT SETTINGS
|
//// MOVEMENT SETTINGS
|
||||||
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
||||||
|
@ -513,8 +521,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#ifdef CUSTOM_M_CODES
|
#ifdef CUSTOM_M_CODES
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
||||||
#define Z_PROBE_OFFSET_RANGE_MIN -15
|
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||||
#define Z_PROBE_OFFSET_RANGE_MAX -5
|
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -542,13 +550,16 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//==============================LCD and SD support=============================
|
//==============================LCD and SD support=============================
|
||||||
|
|
||||||
// Define your display language below. Replace (en) with your language code and uncomment.
|
// Define your display language below. Replace (en) with your language code and uncomment.
|
||||||
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu
|
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu, kana, kana_utf8, test
|
||||||
// See also language.h
|
// See also language.h
|
||||||
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
||||||
|
|
||||||
// Character based displays can have different extended charsets.
|
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
||||||
//#define DISPLAY_CHARSET_HD44780_JAPAN // "ääööüüß23°"
|
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
||||||
//#define DISPLAY_CHARSET_HD44780_WESTERN // "ÄäÖöÜüß²³°" if you see a '~' instead of a 'arrow_right' at the right of submenuitems - this is the right one.
|
// See also documentation/LCDLanguageFont.md
|
||||||
|
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_WESTERN
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_CYRILLIC
|
||||||
|
|
||||||
//#define ULTRA_LCD //general LCD support, also 16x2
|
//#define ULTRA_LCD //general LCD support, also 16x2
|
||||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||||
|
@ -561,6 +572,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||||
|
// 0 to disable buzzer feedback
|
||||||
|
|
||||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||||
// http://reprap.org/wiki/PanelOne
|
// http://reprap.org/wiki/PanelOne
|
||||||
|
@ -622,11 +634,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
|
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
|
||||||
#define FAST_PWM_FAN
|
#define FAST_PWM_FAN
|
||||||
|
|
||||||
// Temperature status LEDs that display the hotend and bet temperature.
|
|
||||||
// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on.
|
|
||||||
// Otherwise the RED led is on. There is 1C hysteresis.
|
|
||||||
//#define TEMP_STAT_LEDS
|
|
||||||
|
|
||||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||||
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||||
|
@ -638,6 +645,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
// at zero value, there are 128 effective control positions.
|
// at zero value, there are 128 effective control positions.
|
||||||
#define SOFT_PWM_SCALE 0
|
#define SOFT_PWM_SCALE 0
|
||||||
|
|
||||||
|
// Temperature status LEDs that display the hotend and bet temperature.
|
||||||
|
// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on.
|
||||||
|
// Otherwise the RED led is on. There is 1C hysteresis.
|
||||||
|
//#define TEMP_STAT_LEDS
|
||||||
|
|
||||||
// M240 Triggers a camera by emulating a Canon RC-1 Remote
|
// M240 Triggers a camera by emulating a Canon RC-1 Remote
|
||||||
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
|
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
|
||||||
// #define PHOTOGRAPH_PIN 23
|
// #define PHOTOGRAPH_PIN 23
|
||||||
|
|
|
@ -264,24 +264,27 @@ your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
// uncomment the 2 defines below:
|
// uncomment the 2 defines below:
|
||||||
|
|
||||||
// Parameters for all extruder heaters
|
// Parameters for all extruder heaters
|
||||||
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 60 //in seconds
|
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
|
||||||
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 5 // in degree Celsius
|
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
|
||||||
|
|
||||||
// If you want to enable this feature for your bed heater,
|
// If you want to enable this feature for your bed heater,
|
||||||
// uncomment the 2 defines below:
|
// uncomment the 2 defines below:
|
||||||
|
|
||||||
// Parameters for the bed heater
|
// Parameters for the bed heater
|
||||||
//#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD 30 //in seconds
|
//#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD 20 //in seconds
|
||||||
//#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS 5// in degree Celsius
|
//#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS 2 // in degree Celsius
|
||||||
|
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Mechanical Settings =========================
|
//============================= Mechanical Settings =========================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
// Uncomment the following line to enable CoreXY kinematics
|
// Uncomment this option to enable CoreXY kinematics
|
||||||
// #define COREXY
|
// #define COREXY
|
||||||
|
|
||||||
|
// Enable this option for Toshiba steppers
|
||||||
|
// #define CONFIG_STEPPERS_TOSHIBA
|
||||||
|
|
||||||
// coarse Endstop Settings
|
// coarse Endstop Settings
|
||||||
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
|
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
|
||||||
|
|
||||||
|
@ -295,7 +298,7 @@ your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
// #define ENDSTOPPULLUP_ZMIN
|
// #define ENDSTOPPULLUP_ZMIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
|
@ -318,13 +321,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define DISABLE_E false // For all extruders
|
#define DISABLE_E false // For all extruders
|
||||||
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
||||||
|
|
||||||
#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||||
#define INVERT_Y_DIR true // for Mendel set to true, for Orca set to false
|
#define INVERT_X_DIR true
|
||||||
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
|
#define INVERT_Y_DIR true
|
||||||
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_Z_DIR true
|
||||||
#define INVERT_E1_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E0_DIR false
|
||||||
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E1_DIR true
|
||||||
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E2_DIR false
|
||||||
|
#define INVERT_E3_DIR false
|
||||||
|
|
||||||
// ENDSTOP SETTINGS:
|
// ENDSTOP SETTINGS:
|
||||||
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
||||||
|
@ -336,12 +340,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
||||||
|
|
||||||
// Travel limits after homing (units are in mm)
|
// Travel limits after homing (units are in mm)
|
||||||
#define X_MAX_POS 255
|
|
||||||
#define X_MIN_POS 0
|
#define X_MIN_POS 0
|
||||||
#define Y_MAX_POS 205
|
|
||||||
#define Y_MIN_POS 0
|
#define Y_MIN_POS 0
|
||||||
#define Z_MAX_POS 235
|
|
||||||
#define Z_MIN_POS 0
|
#define Z_MIN_POS 0
|
||||||
|
#define X_MAX_POS 255
|
||||||
|
#define Y_MAX_POS 205
|
||||||
|
#define Z_MAX_POS 235
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Filament Runout Sensor ======================
|
//============================= Filament Runout Sensor ======================
|
||||||
|
@ -379,39 +383,38 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
|
|
||||||
// There are 2 different ways to pick the X and Y locations to probe:
|
// There are 2 different ways to specify probing locations
|
||||||
|
//
|
||||||
// - "grid" mode
|
// - "grid" mode
|
||||||
// Probe every point in a rectangular grid
|
// Probe several points in a rectangular grid.
|
||||||
// You must specify the rectangle, and the density of sample points
|
// You specify the rectangle and the density of sample points.
|
||||||
// This mode is preferred because there are more measurements.
|
// This mode is preferred because there are more measurements.
|
||||||
// It used to be called ACCURATE_BED_LEVELING but "grid" is more descriptive
|
//
|
||||||
|
// - "3-point" mode
|
||||||
// - "3-point" mode
|
// Probe 3 arbitrary points on the bed (that aren't colinear)
|
||||||
// Probe 3 arbitrary points on the bed (that aren't colinear)
|
// You specify the XY coordinates of all 3 points.
|
||||||
// You must specify the X & Y coordinates of all 3 points
|
|
||||||
|
|
||||||
|
// Enable this to sample the bed in a grid (least squares solution)
|
||||||
|
// Note: this feature generates 10KB extra code size
|
||||||
#define AUTO_BED_LEVELING_GRID
|
#define AUTO_BED_LEVELING_GRID
|
||||||
// with AUTO_BED_LEVELING_GRID, the bed is sampled in a
|
|
||||||
// AUTO_BED_LEVELING_GRID_POINTSxAUTO_BED_LEVELING_GRID_POINTS grid
|
|
||||||
// and least squares solution is calculated
|
|
||||||
// Note: this feature occupies 10'206 byte
|
|
||||||
#ifdef AUTO_BED_LEVELING_GRID
|
#ifdef AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
#define LEFT_PROBE_BED_POSITION 15
|
#define LEFT_PROBE_BED_POSITION 15
|
||||||
#define RIGHT_PROBE_BED_POSITION 170
|
#define RIGHT_PROBE_BED_POSITION 170
|
||||||
#define BACK_PROBE_BED_POSITION 180
|
|
||||||
#define FRONT_PROBE_BED_POSITION 20
|
#define FRONT_PROBE_BED_POSITION 20
|
||||||
|
#define BACK_PROBE_BED_POSITION 180
|
||||||
|
|
||||||
// set the number of grid points per dimension
|
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
||||||
// I wouldn't see a reason to go above 3 (=9 probing points on the bed)
|
|
||||||
|
// Set the number of grid points per dimension
|
||||||
|
// You probably don't need more than 3 (squared=9)
|
||||||
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
||||||
|
|
||||||
|
#else // !AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
#else // not AUTO_BED_LEVELING_GRID
|
// Arbitrary points to probe. A simple cross-product
|
||||||
// with no grid, just probe 3 arbitrary points. A simple cross-product
|
// is used to estimate the plane of the bed.
|
||||||
// is used to esimate the plane of the print bed
|
|
||||||
|
|
||||||
#define ABL_PROBE_PT_1_X 15
|
#define ABL_PROBE_PT_1_X 15
|
||||||
#define ABL_PROBE_PT_1_Y 180
|
#define ABL_PROBE_PT_1_Y 180
|
||||||
#define ABL_PROBE_PT_2_X 15
|
#define ABL_PROBE_PT_2_X 15
|
||||||
|
@ -421,21 +424,24 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#endif // AUTO_BED_LEVELING_GRID
|
#endif // AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
|
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
||||||
// these are the offsets to the probe relative to the extruder tip (Hotend - Probe)
|
|
||||||
// X and Y offsets must be integers
|
// X and Y offsets must be integers
|
||||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -25
|
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Probe on: -left +right
|
||||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29
|
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Probe on: -front +behind
|
||||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35
|
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
||||||
// Be sure you have this distance over your Z_MAX_POS in case
|
// Be sure you have this distance over your Z_MAX_POS in case
|
||||||
|
|
||||||
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
||||||
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
||||||
|
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
||||||
|
|
||||||
|
// #define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" //These commands will be executed in the end of G29 routine.
|
||||||
|
//Useful to retract a deployable probe.
|
||||||
|
|
||||||
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
||||||
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
@ -470,12 +476,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
||||||
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
||||||
|
|
||||||
//Manual homing switch locations:
|
// Manual homing switch locations:
|
||||||
// For deltabots this means top and center of the Cartesian print volume.
|
// For deltabots this means top and center of the Cartesian print volume.
|
||||||
#define MANUAL_X_HOME_POS 0
|
#ifdef MANUAL_HOME_POSITIONS
|
||||||
#define MANUAL_Y_HOME_POS 0
|
#define MANUAL_X_HOME_POS 0
|
||||||
#define MANUAL_Z_HOME_POS 0
|
#define MANUAL_Y_HOME_POS 0
|
||||||
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
#define MANUAL_Z_HOME_POS 0
|
||||||
|
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
||||||
|
#endif
|
||||||
|
|
||||||
//// MOVEMENT SETTINGS
|
//// MOVEMENT SETTINGS
|
||||||
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
||||||
|
@ -513,8 +521,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#ifdef CUSTOM_M_CODES
|
#ifdef CUSTOM_M_CODES
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
||||||
#define Z_PROBE_OFFSET_RANGE_MIN -15
|
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||||
#define Z_PROBE_OFFSET_RANGE_MAX -5
|
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -542,13 +550,16 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//==============================LCD and SD support=============================
|
//==============================LCD and SD support=============================
|
||||||
|
|
||||||
// Define your display language below. Replace (en) with your language code and uncomment.
|
// Define your display language below. Replace (en) with your language code and uncomment.
|
||||||
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu
|
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu, kana, kana_utf8, test
|
||||||
// See also language.h
|
// See also language.h
|
||||||
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
||||||
|
|
||||||
// Character based displays can have different extended charsets.
|
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
||||||
//#define DISPLAY_CHARSET_HD44780_JAPAN // "ääööüüß23°"
|
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
||||||
//#define DISPLAY_CHARSET_HD44780_WESTERN // "ÄäÖöÜüß²³°" if you see a '~' instead of a 'arrow_right' at the right of submenuitems - this is the right one.
|
// See also documentation/LCDLanguageFont.md
|
||||||
|
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_WESTERN
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_CYRILLIC
|
||||||
|
|
||||||
//#define ULTRA_LCD //general LCD support, also 16x2
|
//#define ULTRA_LCD //general LCD support, also 16x2
|
||||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||||
|
@ -561,6 +572,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||||
|
// 0 to disable buzzer feedback
|
||||||
|
|
||||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||||
// http://reprap.org/wiki/PanelOne
|
// http://reprap.org/wiki/PanelOne
|
||||||
|
@ -619,15 +631,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
//#define SAV_3DLCD
|
//#define SAV_3DLCD
|
||||||
|
|
||||||
|
|
||||||
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
|
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
|
||||||
#define FAST_PWM_FAN
|
#define FAST_PWM_FAN
|
||||||
|
|
||||||
// Temperature status LEDs that display the hotend and bet temperature.
|
|
||||||
// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on.
|
|
||||||
// Otherwise the RED led is on. There is 1C hysteresis.
|
|
||||||
//#define TEMP_STAT_LEDS
|
|
||||||
|
|
||||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||||
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||||
|
@ -639,6 +645,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
// at zero value, there are 128 effective control positions.
|
// at zero value, there are 128 effective control positions.
|
||||||
#define SOFT_PWM_SCALE 0
|
#define SOFT_PWM_SCALE 0
|
||||||
|
|
||||||
|
// Temperature status LEDs that display the hotend and bet temperature.
|
||||||
|
// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on.
|
||||||
|
// Otherwise the RED led is on. There is 1C hysteresis.
|
||||||
|
//#define TEMP_STAT_LEDS
|
||||||
|
|
||||||
// M240 Triggers a camera by emulating a Canon RC-1 Remote
|
// M240 Triggers a camera by emulating a Canon RC-1 Remote
|
||||||
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
|
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
|
||||||
// #define PHOTOGRAPH_PIN 23
|
// #define PHOTOGRAPH_PIN 23
|
||||||
|
|
|
@ -100,6 +100,30 @@
|
||||||
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
||||||
//#define Z_DUAL_STEPPER_DRIVERS
|
//#define Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
// Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper.
|
||||||
|
// That way the machine is capable to align the bed during home, since both Z steppers are homed.
|
||||||
|
// There is also an implementation of M666 (software endstops adjustment) to this feature.
|
||||||
|
// After Z homing, this adjustment is applied to just one of the steppers in order to align the bed.
|
||||||
|
// One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2.
|
||||||
|
// If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive.
|
||||||
|
// Play a little bit with small adjustments (0.5mm) and check the behaviour.
|
||||||
|
// The M119 (endstops report) will start reporting the Z2 Endstop as well.
|
||||||
|
|
||||||
|
#define Z_DUAL_ENDSTOPS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_ENDSTOPS
|
||||||
|
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
|
||||||
|
#define Z2_DIR_PIN E2_DIR_PIN
|
||||||
|
#define Z2_ENABLE_PIN E2_ENABLE_PIN
|
||||||
|
#define Z2_MAX_PIN 36 //Endstop used for Z2 axis. In this case I'm using XMAX in a Rumba Board (pin 36)
|
||||||
|
const bool Z2_MAX_ENDSTOP_INVERTING = false;
|
||||||
|
#define DISABLE_XMAX_ENDSTOP //Better to disable the XMAX to avoid conflict. Just rename "XMAX_ENDSTOP" by the endstop you are using for Z2 axis.
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
// Same again but for Y Axis.
|
// Same again but for Y Axis.
|
||||||
//#define Y_DUAL_STEPPER_DRIVERS
|
//#define Y_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
@ -112,41 +136,41 @@
|
||||||
// allowing faster printing speeds.
|
// allowing faster printing speeds.
|
||||||
//#define DUAL_X_CARRIAGE
|
//#define DUAL_X_CARRIAGE
|
||||||
#ifdef DUAL_X_CARRIAGE
|
#ifdef DUAL_X_CARRIAGE
|
||||||
// Configuration for second X-carriage
|
// Configuration for second X-carriage
|
||||||
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
||||||
// the second x-carriage always homes to the maximum endstop.
|
// the second x-carriage always homes to the maximum endstop.
|
||||||
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||||
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
||||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||||
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
||||||
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
||||||
// without modifying the firmware (through the "M218 T1 X???" command).
|
// without modifying the firmware (through the "M218 T1 X???" command).
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
||||||
#define X2_ENABLE_PIN 29
|
#define X2_ENABLE_PIN 29
|
||||||
#define X2_STEP_PIN 25
|
#define X2_STEP_PIN 25
|
||||||
#define X2_DIR_PIN 23
|
#define X2_DIR_PIN 23
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
||||||
|
|
||||||
// Default settings in "Auto-park Mode"
|
// Default settings in "Auto-park Mode"
|
||||||
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
||||||
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
||||||
|
|
||||||
// Default x offset in duplication mode (typically set to half print bed width)
|
// Default x offset in duplication mode (typically set to half print bed width)
|
||||||
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
||||||
|
|
||||||
#endif //DUAL_X_CARRIAGE
|
#endif //DUAL_X_CARRIAGE
|
||||||
|
|
||||||
|
@ -210,34 +234,44 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
||||||
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
|
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
|
||||||
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
|
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
|
||||||
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
||||||
|
|
||||||
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
||||||
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
||||||
|
|
||||||
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
#ifdef SDSUPPORT
|
||||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
|
||||||
|
|
||||||
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
||||||
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
||||||
// using:
|
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
||||||
//#define MENU_ADDAUTOSTART
|
// be commented out otherwise
|
||||||
|
#define SDCARDDETECTINVERTED
|
||||||
|
|
||||||
// Show a progress bar on HD44780 LCDs for SD printing
|
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||||
//#define LCD_PROGRESS_BAR
|
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
||||||
|
|
||||||
#ifdef LCD_PROGRESS_BAR
|
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
||||||
// Amount of time (ms) to show the bar
|
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
||||||
#define PROGRESS_BAR_BAR_TIME 2000
|
// using:
|
||||||
// Amount of time (ms) to show the status message
|
//#define MENU_ADDAUTOSTART
|
||||||
#define PROGRESS_BAR_MSG_TIME 3000
|
|
||||||
// Amount of time (ms) to retain the status message (0=forever)
|
// Show a progress bar on HD44780 LCDs for SD printing
|
||||||
#define PROGRESS_MSG_EXPIRE 0
|
//#define LCD_PROGRESS_BAR
|
||||||
// Enable this to show messages for MSG_TIME then hide them
|
|
||||||
//#define PROGRESS_MSG_ONCE
|
#ifdef LCD_PROGRESS_BAR
|
||||||
#endif
|
// Amount of time (ms) to show the bar
|
||||||
|
#define PROGRESS_BAR_BAR_TIME 2000
|
||||||
|
// Amount of time (ms) to show the status message
|
||||||
|
#define PROGRESS_BAR_MSG_TIME 3000
|
||||||
|
// Amount of time (ms) to retain the status message (0=forever)
|
||||||
|
#define PROGRESS_MSG_EXPIRE 0
|
||||||
|
// Enable this to show messages for MSG_TIME then hide them
|
||||||
|
//#define PROGRESS_MSG_ONCE
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
|
|
||||||
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||||
//#define USE_WATCHDOG
|
//#define USE_WATCHDOG
|
||||||
|
@ -275,7 +309,7 @@
|
||||||
#define EXTRUDER_ADVANCE_K .0
|
#define EXTRUDER_ADVANCE_K .0
|
||||||
#define D_FILAMENT 2.85
|
#define D_FILAMENT 2.85
|
||||||
#define STEPS_MM_E 836
|
#define STEPS_MM_E 836
|
||||||
#endif // ADVANCE
|
#endif
|
||||||
|
|
||||||
// Arc interpretation settings:
|
// Arc interpretation settings:
|
||||||
#define MM_PER_ARC_SEGMENT 1
|
#define MM_PER_ARC_SEGMENT 1
|
||||||
|
@ -283,32 +317,6 @@
|
||||||
|
|
||||||
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
||||||
|
|
||||||
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
|
||||||
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
|
||||||
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
|
||||||
// be commented out otherwise
|
|
||||||
#define SDCARDDETECTINVERTED
|
|
||||||
|
|
||||||
//#ifdef ULTIPANEL
|
|
||||||
// #undef SDCARDDETECTINVERTED
|
|
||||||
//#endif
|
|
||||||
|
|
||||||
// Power Signal Control Definitions
|
|
||||||
// By default use ATX definition
|
|
||||||
#ifndef POWER_SUPPLY
|
|
||||||
#define POWER_SUPPLY 1
|
|
||||||
#endif
|
|
||||||
// 1 = ATX
|
|
||||||
#if (POWER_SUPPLY == 1)
|
|
||||||
#define PS_ON_AWAKE LOW
|
|
||||||
#define PS_ON_ASLEEP HIGH
|
|
||||||
#endif
|
|
||||||
// 2 = X-Box 360 203W
|
|
||||||
#if (POWER_SUPPLY == 2)
|
|
||||||
#define PS_ON_AWAKE HIGH
|
|
||||||
#define PS_ON_ASLEEP LOW
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// Control heater 0 and heater 1 in parallel.
|
// Control heater 0 and heater 1 in parallel.
|
||||||
//#define HEATERS_PARALLEL
|
//#define HEATERS_PARALLEL
|
||||||
|
|
||||||
|
@ -318,7 +326,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
|
|
||||||
// The number of linear motions that can be in the plan at any give time.
|
// The number of linear motions that can be in the plan at any give time.
|
||||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
||||||
#if defined SDSUPPORT
|
#ifdef SDSUPPORT
|
||||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||||
#else
|
#else
|
||||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||||
|
@ -360,6 +368,139 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have TMC26X motor drivers.
|
||||||
|
* you need to import the TMC26XStepper library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_TMCDRIVER
|
||||||
|
#ifdef HAVE_TMCDRIVER
|
||||||
|
|
||||||
|
// #define X_IS_TMC
|
||||||
|
#define X_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define X2_IS_TMC
|
||||||
|
#define X2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y_IS_TMC
|
||||||
|
#define Y_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y2_IS_TMC
|
||||||
|
#define Y2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z_IS_TMC
|
||||||
|
#define Z_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z2_IS_TMC
|
||||||
|
#define Z2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E0_IS_TMC
|
||||||
|
#define E0_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E0_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E1_IS_TMC
|
||||||
|
#define E1_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E1_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E2_IS_TMC
|
||||||
|
#define E2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E3_IS_TMC
|
||||||
|
#define E3_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E3_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have L6470 motor drivers.
|
||||||
|
* you need to import the L6470 library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_L6470DRIVER
|
||||||
|
#ifdef HAVE_L6470DRIVER
|
||||||
|
|
||||||
|
// #define X_IS_L6470
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define X2_IS_L6470
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y_IS_L6470
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y2_IS_L6470
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z_IS_L6470
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z2_IS_L6470
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E0_IS_L6470
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E1_IS_L6470
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E2_IS_L6470
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E3_IS_L6470
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
#include "Conditionals.h"
|
#include "Conditionals.h"
|
||||||
#include "SanityCheck.h"
|
#include "SanityCheck.h"
|
||||||
|
|
||||||
|
|
|
@ -104,7 +104,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
//
|
||||||
|
@ -118,7 +118,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
// 1010 is Pt1000 with 1k pullup (non standard)
|
||||||
// 147 is Pt100 with 4k7 pullup
|
// 147 is Pt100 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
// 110 is Pt100 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
// Use it for Testing or Development purposes. NEVER for production machine.
|
||||||
// #define DUMMY_THERMISTOR_998_VALUE 25
|
// #define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
// #define DUMMY_THERMISTOR_999_VALUE 100
|
// #define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
@ -270,15 +270,15 @@ The issue: If a thermistor come off, it will read a lower temperature than actua
|
||||||
The system will turn the heater on forever, burning up the filament and anything
|
The system will turn the heater on forever, burning up the filament and anything
|
||||||
else around.
|
else around.
|
||||||
|
|
||||||
After the temperature reaches the target for the first time, this feature will
|
After the temperature reaches the target for the first time, this feature will
|
||||||
start measuring for how long the current temperature stays below the target
|
start measuring for how long the current temperature stays below the target
|
||||||
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
||||||
|
|
||||||
If it stays longer than _PERIOD, it means the thermistor temperature
|
If it stays longer than _PERIOD, it means the thermistor temperature
|
||||||
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
||||||
safe side, the system will he halt.
|
safe side, the system will he halt.
|
||||||
|
|
||||||
Bear in mind the count down will just start AFTER the first time the
|
Bear in mind the count down will just start AFTER the first time the
|
||||||
thermistor temperature is over the target, so you will have no problem if
|
thermistor temperature is over the target, so you will have no problem if
|
||||||
your extruder heater takes 2 minutes to hit the target on heating.
|
your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
|
|
||||||
|
@ -321,7 +321,7 @@ your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
// #define ENDSTOPPULLUP_ZMIN
|
// #define ENDSTOPPULLUP_ZMIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
|
@ -344,13 +344,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define DISABLE_E false // For all extruders
|
#define DISABLE_E false // For all extruders
|
||||||
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
||||||
|
|
||||||
#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||||
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
|
#define INVERT_X_DIR true
|
||||||
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
|
#define INVERT_Y_DIR false
|
||||||
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_Z_DIR true
|
||||||
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E0_DIR false
|
||||||
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E1_DIR false
|
||||||
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E2_DIR false
|
||||||
|
#define INVERT_E3_DIR false
|
||||||
|
|
||||||
// ENDSTOP SETTINGS:
|
// ENDSTOP SETTINGS:
|
||||||
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
||||||
|
@ -361,13 +362,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS.
|
#define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS.
|
||||||
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
||||||
|
|
||||||
// Travel limits after homing (units in mm)
|
// Travel limits after homing (units are in mm)
|
||||||
#define X_MAX_POS 215
|
|
||||||
#define X_MIN_POS 0
|
#define X_MIN_POS 0
|
||||||
#define Y_MAX_POS 210
|
|
||||||
#define Y_MIN_POS 0
|
#define Y_MIN_POS 0
|
||||||
#define Z_MAX_POS 180
|
|
||||||
#define Z_MIN_POS 0
|
#define Z_MIN_POS 0
|
||||||
|
#define X_MAX_POS 215
|
||||||
|
#define Y_MAX_POS 210
|
||||||
|
#define Z_MAX_POS 180
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Filament Runout Sensor ======================
|
//============================= Filament Runout Sensor ======================
|
||||||
|
@ -426,14 +427,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define RIGHT_PROBE_BED_POSITION 170
|
#define RIGHT_PROBE_BED_POSITION 170
|
||||||
#define FRONT_PROBE_BED_POSITION 20
|
#define FRONT_PROBE_BED_POSITION 20
|
||||||
#define BACK_PROBE_BED_POSITION 170
|
#define BACK_PROBE_BED_POSITION 170
|
||||||
|
|
||||||
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
||||||
|
|
||||||
// Set the number of grid points per dimension
|
// Set the number of grid points per dimension
|
||||||
// You probably don't need more than 3 (squared=9)
|
// You probably don't need more than 3 (squared=9)
|
||||||
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
||||||
|
|
||||||
|
|
||||||
#else // !AUTO_BED_LEVELING_GRID
|
#else // !AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
// Arbitrary points to probe. A simple cross-product
|
// Arbitrary points to probe. A simple cross-product
|
||||||
|
@ -447,11 +447,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#endif // AUTO_BED_LEVELING_GRID
|
#endif // AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
|
|
||||||
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
||||||
// X and Y offsets must be integers
|
// X and Y offsets must be integers
|
||||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // -left +right
|
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Probe on: -left +right
|
||||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // -front +behind
|
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Probe on: -front +behind
|
||||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
||||||
|
@ -459,10 +458,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
||||||
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
||||||
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
||||||
|
|
||||||
|
// #define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" //These commands will be executed in the end of G29 routine.
|
||||||
|
//Useful to retract a deployable probe.
|
||||||
|
|
||||||
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
||||||
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
@ -497,12 +499,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
||||||
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
||||||
|
|
||||||
//Manual homing switch locations:
|
// Manual homing switch locations:
|
||||||
// For deltabots this means top and center of the Cartesian print volume.
|
// For deltabots this means top and center of the Cartesian print volume.
|
||||||
#define MANUAL_X_HOME_POS 0
|
#ifdef MANUAL_HOME_POSITIONS
|
||||||
#define MANUAL_Y_HOME_POS 0
|
#define MANUAL_X_HOME_POS 0
|
||||||
#define MANUAL_Z_HOME_POS 0
|
#define MANUAL_Y_HOME_POS 0
|
||||||
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
#define MANUAL_Z_HOME_POS 0
|
||||||
|
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
||||||
|
#endif
|
||||||
|
|
||||||
//// MOVEMENT SETTINGS
|
//// MOVEMENT SETTINGS
|
||||||
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
||||||
|
@ -518,8 +522,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration in mm/s^2 for retracts
|
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration in mm/s^2 for retracts
|
||||||
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
|
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||||
|
@ -541,8 +543,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#ifdef CUSTOM_M_CODES
|
#ifdef CUSTOM_M_CODES
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
||||||
#define Z_PROBE_OFFSET_RANGE_MIN -15
|
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||||
#define Z_PROBE_OFFSET_RANGE_MAX -5
|
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -570,13 +572,16 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//==============================LCD and SD support=============================
|
//==============================LCD and SD support=============================
|
||||||
|
|
||||||
// Define your display language below. Replace (en) with your language code and uncomment.
|
// Define your display language below. Replace (en) with your language code and uncomment.
|
||||||
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu
|
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu, kana, kana_utf8, test
|
||||||
// See also language.h
|
// See also language.h
|
||||||
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
||||||
|
|
||||||
// Character based displays can have different extended charsets.
|
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
||||||
#define DISPLAY_CHARSET_HD44780_JAPAN // "ääööüüß23°"
|
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
||||||
//#define DISPLAY_CHARSET_HD44780_WESTERN // "ÄäÖöÜüß²³°" if you see a '~' instead of a 'arrow_right' at the right of submenuitems - this is the right one.
|
// See also documentation/LCDLanguageFont.md
|
||||||
|
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_WESTERN
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_CYRILLIC
|
||||||
|
|
||||||
#define ULTRA_LCD //general LCD support, also 16x2
|
#define ULTRA_LCD //general LCD support, also 16x2
|
||||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||||
|
@ -589,6 +594,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||||
|
// 0 to disable buzzer feedback
|
||||||
|
|
||||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||||
// http://reprap.org/wiki/PanelOne
|
// http://reprap.org/wiki/PanelOne
|
||||||
|
@ -643,7 +649,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
// Shift register panels
|
// Shift register panels
|
||||||
// ---------------------
|
// ---------------------
|
||||||
// 2 wire Non-latching LCD SR from:
|
// 2 wire Non-latching LCD SR from:
|
||||||
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
||||||
|
|
||||||
//#define SAV_3DLCD
|
//#define SAV_3DLCD
|
||||||
|
|
||||||
|
@ -651,7 +657,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define FAST_PWM_FAN
|
//#define FAST_PWM_FAN
|
||||||
|
|
||||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||||
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
|
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||||
//#define FAN_SOFT_PWM
|
//#define FAN_SOFT_PWM
|
||||||
|
|
||||||
|
@ -705,9 +711,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
* Support for a filament diameter sensor
|
* Support for a filament diameter sensor
|
||||||
* Also allows adjustment of diameter at print time (vs at slicing)
|
* Also allows adjustment of diameter at print time (vs at slicing)
|
||||||
* Single extruder only at this point (extruder 0)
|
* Single extruder only at this point (extruder 0)
|
||||||
*
|
*
|
||||||
* Motherboards
|
* Motherboards
|
||||||
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
||||||
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
||||||
* 301 - Rambo - uses Analog input 3
|
* 301 - Rambo - uses Analog input 3
|
||||||
* Note may require analog pins to be defined for different motherboards
|
* Note may require analog pins to be defined for different motherboards
|
||||||
|
@ -724,7 +730,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM)
|
#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM)
|
||||||
|
|
||||||
//defines used in the code
|
//defines used in the code
|
||||||
#define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially
|
#define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially
|
||||||
|
|
||||||
//When using an LCD, uncomment the line below to display the Filament sensor data on the last line instead of status. Status will appear for 5 sec.
|
//When using an LCD, uncomment the line below to display the Filament sensor data on the last line instead of status. Status will appear for 5 sec.
|
||||||
//#define FILAMENT_LCD_DISPLAY
|
//#define FILAMENT_LCD_DISPLAY
|
||||||
|
|
|
@ -100,6 +100,30 @@
|
||||||
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
||||||
//#define Z_DUAL_STEPPER_DRIVERS
|
//#define Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
// Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper.
|
||||||
|
// That way the machine is capable to align the bed during home, since both Z steppers are homed.
|
||||||
|
// There is also an implementation of M666 (software endstops adjustment) to this feature.
|
||||||
|
// After Z homing, this adjustment is applied to just one of the steppers in order to align the bed.
|
||||||
|
// One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2.
|
||||||
|
// If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive.
|
||||||
|
// Play a little bit with small adjustments (0.5mm) and check the behaviour.
|
||||||
|
// The M119 (endstops report) will start reporting the Z2 Endstop as well.
|
||||||
|
|
||||||
|
#define Z_DUAL_ENDSTOPS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_ENDSTOPS
|
||||||
|
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
|
||||||
|
#define Z2_DIR_PIN E2_DIR_PIN
|
||||||
|
#define Z2_ENABLE_PIN E2_ENABLE_PIN
|
||||||
|
#define Z2_MAX_PIN 36 //Endstop used for Z2 axis. In this case I'm using XMAX in a Rumba Board (pin 36)
|
||||||
|
const bool Z2_MAX_ENDSTOP_INVERTING = false;
|
||||||
|
#define DISABLE_XMAX_ENDSTOP //Better to disable the XMAX to avoid conflict. Just rename "XMAX_ENDSTOP" by the endstop you are using for Z2 axis.
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
// Same again but for Y Axis.
|
// Same again but for Y Axis.
|
||||||
//#define Y_DUAL_STEPPER_DRIVERS
|
//#define Y_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
@ -112,41 +136,41 @@
|
||||||
// allowing faster printing speeds.
|
// allowing faster printing speeds.
|
||||||
//#define DUAL_X_CARRIAGE
|
//#define DUAL_X_CARRIAGE
|
||||||
#ifdef DUAL_X_CARRIAGE
|
#ifdef DUAL_X_CARRIAGE
|
||||||
// Configuration for second X-carriage
|
// Configuration for second X-carriage
|
||||||
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
||||||
// the second x-carriage always homes to the maximum endstop.
|
// the second x-carriage always homes to the maximum endstop.
|
||||||
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||||
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
||||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||||
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
||||||
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
||||||
// without modifying the firmware (through the "M218 T1 X???" command).
|
// without modifying the firmware (through the "M218 T1 X???" command).
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
||||||
#define X2_ENABLE_PIN 29
|
#define X2_ENABLE_PIN 29
|
||||||
#define X2_STEP_PIN 25
|
#define X2_STEP_PIN 25
|
||||||
#define X2_DIR_PIN 23
|
#define X2_DIR_PIN 23
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
||||||
|
|
||||||
// Default settings in "Auto-park Mode"
|
// Default settings in "Auto-park Mode"
|
||||||
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
||||||
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
||||||
|
|
||||||
// Default x offset in duplication mode (typically set to half print bed width)
|
// Default x offset in duplication mode (typically set to half print bed width)
|
||||||
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
||||||
|
|
||||||
#endif //DUAL_X_CARRIAGE
|
#endif //DUAL_X_CARRIAGE
|
||||||
|
|
||||||
|
@ -158,11 +182,7 @@
|
||||||
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
||||||
|
|
||||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||||
#ifdef CONFIG_STEPPERS_TOSHIBA
|
|
||||||
#define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers
|
|
||||||
#else
|
|
||||||
#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step)
|
|
||||||
#endif
|
|
||||||
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
||||||
#define INVERT_X_STEP_PIN false
|
#define INVERT_X_STEP_PIN false
|
||||||
#define INVERT_Y_STEP_PIN false
|
#define INVERT_Y_STEP_PIN false
|
||||||
|
@ -214,34 +234,44 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
||||||
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
|
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
|
||||||
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
|
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
|
||||||
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
||||||
|
|
||||||
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
||||||
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
||||||
|
|
||||||
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
#ifdef SDSUPPORT
|
||||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
|
||||||
|
|
||||||
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
||||||
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
||||||
// using:
|
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
||||||
#define MENU_ADDAUTOSTART
|
// be commented out otherwise
|
||||||
|
#define SDCARDDETECTINVERTED
|
||||||
|
|
||||||
// Show a progress bar on HD44780 LCDs for SD printing
|
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||||
//#define LCD_PROGRESS_BAR
|
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
||||||
|
|
||||||
#ifdef LCD_PROGRESS_BAR
|
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
||||||
// Amount of time (ms) to show the bar
|
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
||||||
#define PROGRESS_BAR_BAR_TIME 2000
|
// using:
|
||||||
// Amount of time (ms) to show the status message
|
//#define MENU_ADDAUTOSTART
|
||||||
#define PROGRESS_BAR_MSG_TIME 3000
|
|
||||||
// Amount of time (ms) to retain the status message (0=forever)
|
// Show a progress bar on HD44780 LCDs for SD printing
|
||||||
#define PROGRESS_MSG_EXPIRE 0
|
//#define LCD_PROGRESS_BAR
|
||||||
// Enable this to show messages for MSG_TIME then hide them
|
|
||||||
//#define PROGRESS_MSG_ONCE
|
#ifdef LCD_PROGRESS_BAR
|
||||||
#endif
|
// Amount of time (ms) to show the bar
|
||||||
|
#define PROGRESS_BAR_BAR_TIME 2000
|
||||||
|
// Amount of time (ms) to show the status message
|
||||||
|
#define PROGRESS_BAR_MSG_TIME 3000
|
||||||
|
// Amount of time (ms) to retain the status message (0=forever)
|
||||||
|
#define PROGRESS_MSG_EXPIRE 0
|
||||||
|
// Enable this to show messages for MSG_TIME then hide them
|
||||||
|
//#define PROGRESS_MSG_ONCE
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
|
|
||||||
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||||
//#define USE_WATCHDOG
|
//#define USE_WATCHDOG
|
||||||
|
@ -279,7 +309,7 @@
|
||||||
#define EXTRUDER_ADVANCE_K .0
|
#define EXTRUDER_ADVANCE_K .0
|
||||||
#define D_FILAMENT 1.75
|
#define D_FILAMENT 1.75
|
||||||
#define STEPS_MM_E 100.47095761381482
|
#define STEPS_MM_E 100.47095761381482
|
||||||
#endif // ADVANCE
|
#endif
|
||||||
|
|
||||||
// Arc interpretation settings:
|
// Arc interpretation settings:
|
||||||
#define MM_PER_ARC_SEGMENT 1
|
#define MM_PER_ARC_SEGMENT 1
|
||||||
|
@ -287,12 +317,6 @@
|
||||||
|
|
||||||
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
||||||
|
|
||||||
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
|
||||||
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
|
||||||
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
|
||||||
// be commented out otherwise
|
|
||||||
#define SDCARDDETECTINVERTED
|
|
||||||
|
|
||||||
// Control heater 0 and heater 1 in parallel.
|
// Control heater 0 and heater 1 in parallel.
|
||||||
//#define HEATERS_PARALLEL
|
//#define HEATERS_PARALLEL
|
||||||
|
|
||||||
|
@ -302,7 +326,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
|
|
||||||
// The number of linear motions that can be in the plan at any give time.
|
// The number of linear motions that can be in the plan at any give time.
|
||||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
||||||
#if defined SDSUPPORT
|
#ifdef SDSUPPORT
|
||||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||||
#else
|
#else
|
||||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||||
|
@ -325,11 +349,11 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
|
#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
|
||||||
#define RETRACT_LENGTH 3 //default retract length (positive mm)
|
#define RETRACT_LENGTH 3 //default retract length (positive mm)
|
||||||
#define RETRACT_LENGTH_SWAP 13 //default swap retract length (positive mm), for extruder change
|
#define RETRACT_LENGTH_SWAP 13 //default swap retract length (positive mm), for extruder change
|
||||||
#define RETRACT_FEEDRATE 80*60 //default feedrate for retracting (mm/s)
|
#define RETRACT_FEEDRATE 80*60 //default feedrate for retracting (mm/s)
|
||||||
#define RETRACT_ZLIFT 0 //default retract Z-lift
|
#define RETRACT_ZLIFT 0 //default retract Z-lift
|
||||||
#define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering)
|
#define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering)
|
||||||
//#define RETRACT_RECOVER_LENGTH_SWAP 0 //default additional swap recover length (mm, added to retract length when recovering from extruder change)
|
//#define RETRACT_RECOVER_LENGTH_SWAP 0 //default additional swap recover length (mm, added to retract length when recovering from extruder change)
|
||||||
#define RETRACT_RECOVER_FEEDRATE 8*60 //default feedrate for recovering from retraction (mm/s)
|
#define RETRACT_RECOVER_FEEDRATE 8*60 //default feedrate for recovering from retraction (mm/s)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Add support for experimental filament exchange support M600; requires display
|
// Add support for experimental filament exchange support M600; requires display
|
||||||
|
@ -344,6 +368,139 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have TMC26X motor drivers.
|
||||||
|
* you need to import the TMC26XStepper library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_TMCDRIVER
|
||||||
|
#ifdef HAVE_TMCDRIVER
|
||||||
|
|
||||||
|
// #define X_IS_TMC
|
||||||
|
#define X_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define X2_IS_TMC
|
||||||
|
#define X2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y_IS_TMC
|
||||||
|
#define Y_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y2_IS_TMC
|
||||||
|
#define Y2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z_IS_TMC
|
||||||
|
#define Z_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z2_IS_TMC
|
||||||
|
#define Z2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E0_IS_TMC
|
||||||
|
#define E0_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E0_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E1_IS_TMC
|
||||||
|
#define E1_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E1_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E2_IS_TMC
|
||||||
|
#define E2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E3_IS_TMC
|
||||||
|
#define E3_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E3_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have L6470 motor drivers.
|
||||||
|
* you need to import the L6470 library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_L6470DRIVER
|
||||||
|
#ifdef HAVE_L6470DRIVER
|
||||||
|
|
||||||
|
// #define X_IS_L6470
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define X2_IS_L6470
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y_IS_L6470
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y2_IS_L6470
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z_IS_L6470
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z2_IS_L6470
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E0_IS_L6470
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E1_IS_L6470
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E2_IS_L6470
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E3_IS_L6470
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
#include "Conditionals.h"
|
#include "Conditionals.h"
|
||||||
#include "SanityCheck.h"
|
#include "SanityCheck.h"
|
||||||
|
|
||||||
|
|
|
@ -104,7 +104,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
//
|
||||||
|
@ -118,7 +118,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
// 1010 is Pt1000 with 1k pullup (non standard)
|
||||||
// 147 is Pt100 with 4k7 pullup
|
// 147 is Pt100 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
// 110 is Pt100 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
// Use it for Testing or Development purposes. NEVER for production machine.
|
||||||
// #define DUMMY_THERMISTOR_998_VALUE 25
|
// #define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
// #define DUMMY_THERMISTOR_999_VALUE 100
|
// #define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
@ -275,15 +275,15 @@ The issue: If a thermistor come off, it will read a lower temperature than actua
|
||||||
The system will turn the heater on forever, burning up the filament and anything
|
The system will turn the heater on forever, burning up the filament and anything
|
||||||
else around.
|
else around.
|
||||||
|
|
||||||
After the temperature reaches the target for the first time, this feature will
|
After the temperature reaches the target for the first time, this feature will
|
||||||
start measuring for how long the current temperature stays below the target
|
start measuring for how long the current temperature stays below the target
|
||||||
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
||||||
|
|
||||||
If it stays longer than _PERIOD, it means the thermistor temperature
|
If it stays longer than _PERIOD, it means the thermistor temperature
|
||||||
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
||||||
safe side, the system will he halt.
|
safe side, the system will he halt.
|
||||||
|
|
||||||
Bear in mind the count down will just start AFTER the first time the
|
Bear in mind the count down will just start AFTER the first time the
|
||||||
thermistor temperature is over the target, so you will have no problem if
|
thermistor temperature is over the target, so you will have no problem if
|
||||||
your extruder heater takes 2 minutes to hit the target on heating.
|
your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
|
|
||||||
|
@ -326,7 +326,7 @@ your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
#define ENDSTOPPULLUP_ZMIN
|
#define ENDSTOPPULLUP_ZMIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
|
@ -349,13 +349,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define DISABLE_E false // For all extruders
|
#define DISABLE_E false // For all extruders
|
||||||
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
||||||
|
|
||||||
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||||
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
|
#define INVERT_X_DIR false
|
||||||
#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true
|
#define INVERT_Y_DIR false
|
||||||
#define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_Z_DIR false
|
||||||
#define INVERT_E1_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E0_DIR true
|
||||||
#define INVERT_E2_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E1_DIR true
|
||||||
#define INVERT_E3_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E2_DIR true
|
||||||
|
#define INVERT_E3_DIR true
|
||||||
|
|
||||||
// ENDSTOP SETTINGS:
|
// ENDSTOP SETTINGS:
|
||||||
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
||||||
|
@ -367,12 +368,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
||||||
|
|
||||||
// Travel limits after homing (units are in mm)
|
// Travel limits after homing (units are in mm)
|
||||||
#define X_MAX_POS 200
|
|
||||||
#define X_MIN_POS 0
|
#define X_MIN_POS 0
|
||||||
#define Y_MAX_POS 200
|
|
||||||
#define Y_MIN_POS 0
|
#define Y_MIN_POS 0
|
||||||
#define Z_MAX_POS 200
|
|
||||||
#define Z_MIN_POS 0
|
#define Z_MIN_POS 0
|
||||||
|
#define X_MAX_POS 200
|
||||||
|
#define Y_MAX_POS 200
|
||||||
|
#define Z_MAX_POS 200
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Filament Runout Sensor ======================
|
//============================= Filament Runout Sensor ======================
|
||||||
|
@ -432,13 +433,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define FRONT_PROBE_BED_POSITION 20
|
#define FRONT_PROBE_BED_POSITION 20
|
||||||
#define BACK_PROBE_BED_POSITION 170
|
#define BACK_PROBE_BED_POSITION 170
|
||||||
|
|
||||||
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
||||||
|
|
||||||
// Set the number of grid points per dimension
|
// Set the number of grid points per dimension
|
||||||
// You probably don't need more than 3 (squared=9)
|
// You probably don't need more than 3 (squared=9)
|
||||||
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
||||||
|
|
||||||
|
|
||||||
#else // !AUTO_BED_LEVELING_GRID
|
#else // !AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
// Arbitrary points to probe. A simple cross-product
|
// Arbitrary points to probe. A simple cross-product
|
||||||
|
@ -452,11 +452,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#endif // AUTO_BED_LEVELING_GRID
|
#endif // AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
|
|
||||||
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
||||||
// X and Y offsets must be integers
|
// X and Y offsets must be integers
|
||||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // -left +right
|
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Probe on: -left +right
|
||||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // -front +behind
|
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Probe on: -front +behind
|
||||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
||||||
|
@ -464,10 +463,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
||||||
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
||||||
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
||||||
|
|
||||||
|
// #define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" //These commands will be executed in the end of G29 routine.
|
||||||
|
//Useful to retract a deployable probe.
|
||||||
|
|
||||||
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
||||||
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
@ -502,12 +504,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
||||||
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
||||||
|
|
||||||
//Manual homing switch locations:
|
// Manual homing switch locations:
|
||||||
// For deltabots this means top and center of the Cartesian print volume.
|
// For deltabots this means top and center of the Cartesian print volume.
|
||||||
#define MANUAL_X_HOME_POS 0
|
#ifdef MANUAL_HOME_POSITIONS
|
||||||
#define MANUAL_Y_HOME_POS 0
|
#define MANUAL_X_HOME_POS 0
|
||||||
#define MANUAL_Z_HOME_POS 0
|
#define MANUAL_Y_HOME_POS 0
|
||||||
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
#define MANUAL_Z_HOME_POS 0
|
||||||
|
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
||||||
|
#endif
|
||||||
|
|
||||||
//// MOVEMENT SETTINGS
|
//// MOVEMENT SETTINGS
|
||||||
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
||||||
|
@ -545,8 +549,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#ifdef CUSTOM_M_CODES
|
#ifdef CUSTOM_M_CODES
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
||||||
#define Z_PROBE_OFFSET_RANGE_MIN -15
|
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||||
#define Z_PROBE_OFFSET_RANGE_MAX -5
|
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -574,13 +578,16 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//==============================LCD and SD support=============================
|
//==============================LCD and SD support=============================
|
||||||
|
|
||||||
// Define your display language below. Replace (en) with your language code and uncomment.
|
// Define your display language below. Replace (en) with your language code and uncomment.
|
||||||
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu
|
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu, kana, kana_utf8, test
|
||||||
// See also language.h
|
// See also language.h
|
||||||
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
||||||
|
|
||||||
// Character based displays can have different extended charsets.
|
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
||||||
#define DISPLAY_CHARSET_HD44780_JAPAN // "ääööüüß23°"
|
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
||||||
//#define DISPLAY_CHARSET_HD44780_WESTERN // "ÄäÖöÜüß²³°" if you see a '~' instead of a 'arrow_right' at the right of submenuitems - this is the right one.
|
// See also documentation/LCDLanguageFont.md
|
||||||
|
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_WESTERN
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_CYRILLIC
|
||||||
|
|
||||||
//#define ULTRA_LCD //general LCD support, also 16x2
|
//#define ULTRA_LCD //general LCD support, also 16x2
|
||||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||||
|
@ -593,6 +600,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||||
|
// 0 to disable buzzer feedback
|
||||||
|
|
||||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||||
// http://reprap.org/wiki/PanelOne
|
// http://reprap.org/wiki/PanelOne
|
||||||
|
@ -647,7 +655,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
// Shift register panels
|
// Shift register panels
|
||||||
// ---------------------
|
// ---------------------
|
||||||
// 2 wire Non-latching LCD SR from:
|
// 2 wire Non-latching LCD SR from:
|
||||||
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
||||||
|
|
||||||
//#define SAV_3DLCD
|
//#define SAV_3DLCD
|
||||||
|
|
||||||
|
@ -655,7 +663,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define FAST_PWM_FAN
|
//#define FAST_PWM_FAN
|
||||||
|
|
||||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||||
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
|
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||||
//#define FAN_SOFT_PWM
|
//#define FAN_SOFT_PWM
|
||||||
|
|
||||||
|
@ -709,9 +717,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
* Support for a filament diameter sensor
|
* Support for a filament diameter sensor
|
||||||
* Also allows adjustment of diameter at print time (vs at slicing)
|
* Also allows adjustment of diameter at print time (vs at slicing)
|
||||||
* Single extruder only at this point (extruder 0)
|
* Single extruder only at this point (extruder 0)
|
||||||
*
|
*
|
||||||
* Motherboards
|
* Motherboards
|
||||||
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
||||||
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
||||||
* 301 - Rambo - uses Analog input 3
|
* 301 - Rambo - uses Analog input 3
|
||||||
* Note may require analog pins to be defined for different motherboards
|
* Note may require analog pins to be defined for different motherboards
|
||||||
|
|
|
@ -100,6 +100,30 @@
|
||||||
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
||||||
//#define Z_DUAL_STEPPER_DRIVERS
|
//#define Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
// Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper.
|
||||||
|
// That way the machine is capable to align the bed during home, since both Z steppers are homed.
|
||||||
|
// There is also an implementation of M666 (software endstops adjustment) to this feature.
|
||||||
|
// After Z homing, this adjustment is applied to just one of the steppers in order to align the bed.
|
||||||
|
// One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2.
|
||||||
|
// If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive.
|
||||||
|
// Play a little bit with small adjustments (0.5mm) and check the behaviour.
|
||||||
|
// The M119 (endstops report) will start reporting the Z2 Endstop as well.
|
||||||
|
|
||||||
|
#define Z_DUAL_ENDSTOPS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_ENDSTOPS
|
||||||
|
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
|
||||||
|
#define Z2_DIR_PIN E2_DIR_PIN
|
||||||
|
#define Z2_ENABLE_PIN E2_ENABLE_PIN
|
||||||
|
#define Z2_MAX_PIN 36 //Endstop used for Z2 axis. In this case I'm using XMAX in a Rumba Board (pin 36)
|
||||||
|
const bool Z2_MAX_ENDSTOP_INVERTING = false;
|
||||||
|
#define DISABLE_XMAX_ENDSTOP //Better to disable the XMAX to avoid conflict. Just rename "XMAX_ENDSTOP" by the endstop you are using for Z2 axis.
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
// Same again but for Y Axis.
|
// Same again but for Y Axis.
|
||||||
//#define Y_DUAL_STEPPER_DRIVERS
|
//#define Y_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
@ -112,41 +136,41 @@
|
||||||
// allowing faster printing speeds.
|
// allowing faster printing speeds.
|
||||||
//#define DUAL_X_CARRIAGE
|
//#define DUAL_X_CARRIAGE
|
||||||
#ifdef DUAL_X_CARRIAGE
|
#ifdef DUAL_X_CARRIAGE
|
||||||
// Configuration for second X-carriage
|
// Configuration for second X-carriage
|
||||||
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
||||||
// the second x-carriage always homes to the maximum endstop.
|
// the second x-carriage always homes to the maximum endstop.
|
||||||
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||||
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
||||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||||
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
||||||
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
||||||
// without modifying the firmware (through the "M218 T1 X???" command).
|
// without modifying the firmware (through the "M218 T1 X???" command).
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
||||||
#define X2_ENABLE_PIN 29
|
#define X2_ENABLE_PIN 29
|
||||||
#define X2_STEP_PIN 25
|
#define X2_STEP_PIN 25
|
||||||
#define X2_DIR_PIN 23
|
#define X2_DIR_PIN 23
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
||||||
|
|
||||||
// Default settings in "Auto-park Mode"
|
// Default settings in "Auto-park Mode"
|
||||||
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
||||||
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
||||||
|
|
||||||
// Default x offset in duplication mode (typically set to half print bed width)
|
// Default x offset in duplication mode (typically set to half print bed width)
|
||||||
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
||||||
|
|
||||||
#endif //DUAL_X_CARRIAGE
|
#endif //DUAL_X_CARRIAGE
|
||||||
|
|
||||||
|
@ -210,34 +234,44 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
||||||
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
|
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
|
||||||
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
|
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
|
||||||
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
||||||
|
|
||||||
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
||||||
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
||||||
|
|
||||||
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
#ifdef SDSUPPORT
|
||||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
|
||||||
|
|
||||||
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
||||||
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
||||||
// using:
|
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
||||||
//#define MENU_ADDAUTOSTART
|
// be commented out otherwise
|
||||||
|
#define SDCARDDETECTINVERTED
|
||||||
|
|
||||||
// Show a progress bar on HD44780 LCDs for SD printing
|
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||||
//#define LCD_PROGRESS_BAR
|
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
||||||
|
|
||||||
#ifdef LCD_PROGRESS_BAR
|
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
||||||
// Amount of time (ms) to show the bar
|
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
||||||
#define PROGRESS_BAR_BAR_TIME 2000
|
// using:
|
||||||
// Amount of time (ms) to show the status message
|
//#define MENU_ADDAUTOSTART
|
||||||
#define PROGRESS_BAR_MSG_TIME 3000
|
|
||||||
// Amount of time (ms) to retain the status message (0=forever)
|
// Show a progress bar on HD44780 LCDs for SD printing
|
||||||
#define PROGRESS_MSG_EXPIRE 0
|
//#define LCD_PROGRESS_BAR
|
||||||
// Enable this to show messages for MSG_TIME then hide them
|
|
||||||
//#define PROGRESS_MSG_ONCE
|
#ifdef LCD_PROGRESS_BAR
|
||||||
#endif
|
// Amount of time (ms) to show the bar
|
||||||
|
#define PROGRESS_BAR_BAR_TIME 2000
|
||||||
|
// Amount of time (ms) to show the status message
|
||||||
|
#define PROGRESS_BAR_MSG_TIME 3000
|
||||||
|
// Amount of time (ms) to retain the status message (0=forever)
|
||||||
|
#define PROGRESS_MSG_EXPIRE 0
|
||||||
|
// Enable this to show messages for MSG_TIME then hide them
|
||||||
|
//#define PROGRESS_MSG_ONCE
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
|
|
||||||
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||||
//#define USE_WATCHDOG
|
//#define USE_WATCHDOG
|
||||||
|
@ -275,7 +309,7 @@
|
||||||
#define EXTRUDER_ADVANCE_K .0
|
#define EXTRUDER_ADVANCE_K .0
|
||||||
#define D_FILAMENT 2.85
|
#define D_FILAMENT 2.85
|
||||||
#define STEPS_MM_E 836
|
#define STEPS_MM_E 836
|
||||||
#endif // ADVANCE
|
#endif
|
||||||
|
|
||||||
// Arc interpretation settings:
|
// Arc interpretation settings:
|
||||||
#define MM_PER_ARC_SEGMENT 1
|
#define MM_PER_ARC_SEGMENT 1
|
||||||
|
@ -283,12 +317,6 @@
|
||||||
|
|
||||||
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
||||||
|
|
||||||
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
|
||||||
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
|
||||||
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
|
||||||
// be commented out otherwise
|
|
||||||
#define SDCARDDETECTINVERTED
|
|
||||||
|
|
||||||
// Control heater 0 and heater 1 in parallel.
|
// Control heater 0 and heater 1 in parallel.
|
||||||
//#define HEATERS_PARALLEL
|
//#define HEATERS_PARALLEL
|
||||||
|
|
||||||
|
@ -298,7 +326,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
|
|
||||||
// The number of linear motions that can be in the plan at any give time.
|
// The number of linear motions that can be in the plan at any give time.
|
||||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
||||||
#if defined SDSUPPORT
|
#ifdef SDSUPPORT
|
||||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||||
#else
|
#else
|
||||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||||
|
@ -340,6 +368,139 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have TMC26X motor drivers.
|
||||||
|
* you need to import the TMC26XStepper library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_TMCDRIVER
|
||||||
|
#ifdef HAVE_TMCDRIVER
|
||||||
|
|
||||||
|
// #define X_IS_TMC
|
||||||
|
#define X_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define X2_IS_TMC
|
||||||
|
#define X2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y_IS_TMC
|
||||||
|
#define Y_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y2_IS_TMC
|
||||||
|
#define Y2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z_IS_TMC
|
||||||
|
#define Z_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z2_IS_TMC
|
||||||
|
#define Z2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E0_IS_TMC
|
||||||
|
#define E0_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E0_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E1_IS_TMC
|
||||||
|
#define E1_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E1_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E2_IS_TMC
|
||||||
|
#define E2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E3_IS_TMC
|
||||||
|
#define E3_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E3_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have L6470 motor drivers.
|
||||||
|
* you need to import the L6470 library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_L6470DRIVER
|
||||||
|
#ifdef HAVE_L6470DRIVER
|
||||||
|
|
||||||
|
// #define X_IS_L6470
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define X2_IS_L6470
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y_IS_L6470
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y2_IS_L6470
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z_IS_L6470
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z2_IS_L6470
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E0_IS_L6470
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E1_IS_L6470
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E2_IS_L6470
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E3_IS_L6470
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
#include "Conditionals.h"
|
#include "Conditionals.h"
|
||||||
#include "SanityCheck.h"
|
#include "SanityCheck.h"
|
||||||
|
|
||||||
|
|
|
@ -122,7 +122,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
//
|
||||||
|
@ -136,7 +136,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
// 1010 is Pt1000 with 1k pullup (non standard)
|
||||||
// 147 is Pt100 with 4k7 pullup
|
// 147 is Pt100 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
// 110 is Pt100 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
// Use it for Testing or Development purposes. NEVER for production machine.
|
||||||
// #define DUMMY_THERMISTOR_998_VALUE 25
|
// #define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
// #define DUMMY_THERMISTOR_999_VALUE 100
|
// #define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
@ -299,15 +299,15 @@ The issue: If a thermistor come off, it will read a lower temperature than actua
|
||||||
The system will turn the heater on forever, burning up the filament and anything
|
The system will turn the heater on forever, burning up the filament and anything
|
||||||
else around.
|
else around.
|
||||||
|
|
||||||
After the temperature reaches the target for the first time, this feature will
|
After the temperature reaches the target for the first time, this feature will
|
||||||
start measuring for how long the current temperature stays below the target
|
start measuring for how long the current temperature stays below the target
|
||||||
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
||||||
|
|
||||||
If it stays longer than _PERIOD, it means the thermistor temperature
|
If it stays longer than _PERIOD, it means the thermistor temperature
|
||||||
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
||||||
safe side, the system will he halt.
|
safe side, the system will he halt.
|
||||||
|
|
||||||
Bear in mind the count down will just start AFTER the first time the
|
Bear in mind the count down will just start AFTER the first time the
|
||||||
thermistor temperature is over the target, so you will have no problem if
|
thermistor temperature is over the target, so you will have no problem if
|
||||||
your extruder heater takes 2 minutes to hit the target on heating.
|
your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
|
|
||||||
|
@ -350,7 +350,7 @@ your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
// #define ENDSTOPPULLUP_ZMIN
|
// #define ENDSTOPPULLUP_ZMIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
|
@ -373,13 +373,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define DISABLE_E false // For all extruders
|
#define DISABLE_E false // For all extruders
|
||||||
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
||||||
|
|
||||||
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||||
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
|
#define INVERT_X_DIR false
|
||||||
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
|
#define INVERT_Y_DIR false
|
||||||
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_Z_DIR true
|
||||||
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E0_DIR false
|
||||||
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E1_DIR false
|
||||||
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E2_DIR false
|
||||||
|
#define INVERT_E3_DIR false
|
||||||
|
|
||||||
// ENDSTOP SETTINGS:
|
// ENDSTOP SETTINGS:
|
||||||
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
||||||
|
@ -391,12 +392,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
||||||
|
|
||||||
// Travel limits after homing (units are in mm)
|
// Travel limits after homing (units are in mm)
|
||||||
#define X_MAX_POS 200
|
|
||||||
#define X_MIN_POS 0
|
#define X_MIN_POS 0
|
||||||
#define Y_MAX_POS 200
|
|
||||||
#define Y_MIN_POS 0
|
#define Y_MIN_POS 0
|
||||||
#define Z_MAX_POS 225
|
|
||||||
#define Z_MIN_POS MANUAL_Z_HOME_POS
|
#define Z_MIN_POS MANUAL_Z_HOME_POS
|
||||||
|
#define X_MAX_POS 200
|
||||||
|
#define Y_MAX_POS 200
|
||||||
|
#define Z_MAX_POS 225
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Filament Runout Sensor ======================
|
//============================= Filament Runout Sensor ======================
|
||||||
|
@ -456,13 +457,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define FRONT_PROBE_BED_POSITION 20
|
#define FRONT_PROBE_BED_POSITION 20
|
||||||
#define BACK_PROBE_BED_POSITION 170
|
#define BACK_PROBE_BED_POSITION 170
|
||||||
|
|
||||||
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
||||||
|
|
||||||
// Set the number of grid points per dimension
|
// Set the number of grid points per dimension
|
||||||
// You probably don't need more than 3 (squared=9)
|
// You probably don't need more than 3 (squared=9)
|
||||||
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
||||||
|
|
||||||
|
|
||||||
#else // !AUTO_BED_LEVELING_GRID
|
#else // !AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
// Arbitrary points to probe. A simple cross-product
|
// Arbitrary points to probe. A simple cross-product
|
||||||
|
@ -476,11 +476,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#endif // AUTO_BED_LEVELING_GRID
|
#endif // AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
|
|
||||||
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
||||||
// X and Y offsets must be integers
|
// X and Y offsets must be integers
|
||||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // -left +right
|
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Probe on: -left +right
|
||||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // -front +behind
|
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Probe on: -front +behind
|
||||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
||||||
|
|
||||||
//#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
//#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
||||||
|
@ -488,10 +487,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
||||||
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
||||||
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
||||||
|
|
||||||
|
// #define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" //These commands will be executed in the end of G29 routine.
|
||||||
|
//Useful to retract a deployable probe.
|
||||||
|
|
||||||
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
||||||
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
@ -526,13 +528,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
||||||
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
||||||
|
|
||||||
//Manual homing switch locations:
|
// Manual homing switch locations:
|
||||||
// For deltabots this means top and center of the Cartesian print volume.
|
// For deltabots this means top and center of the Cartesian print volume.
|
||||||
// For SCARA: Offset between HomingPosition and Bed X=0 / Y=0
|
#ifdef MANUAL_HOME_POSITIONS
|
||||||
#define MANUAL_X_HOME_POS -22.
|
// For SCARA: Offset between HomingPosition and Bed X=0 / Y=0
|
||||||
#define MANUAL_Y_HOME_POS -52.
|
#define MANUAL_X_HOME_POS -22.
|
||||||
#define MANUAL_Z_HOME_POS 0.1 // Distance between nozzle and print surface after homing.
|
#define MANUAL_Y_HOME_POS -52.
|
||||||
|
#define MANUAL_Z_HOME_POS 0.1 // Distance between nozzle and print surface after homing.
|
||||||
|
#endif
|
||||||
|
|
||||||
//// MOVEMENT SETTINGS
|
//// MOVEMENT SETTINGS
|
||||||
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
||||||
|
@ -548,8 +551,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration in mm/s^2 for retracts
|
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration in mm/s^2 for retracts
|
||||||
#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
|
#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||||
|
@ -571,8 +572,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#ifdef CUSTOM_M_CODES
|
#ifdef CUSTOM_M_CODES
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
||||||
#define Z_PROBE_OFFSET_RANGE_MIN -15
|
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||||
#define Z_PROBE_OFFSET_RANGE_MAX -5
|
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -600,13 +601,16 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//==============================LCD and SD support=============================
|
//==============================LCD and SD support=============================
|
||||||
|
|
||||||
// Define your display language below. Replace (en) with your language code and uncomment.
|
// Define your display language below. Replace (en) with your language code and uncomment.
|
||||||
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu
|
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu, kana, kana_utf8, test
|
||||||
// See also language.h
|
// See also language.h
|
||||||
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
||||||
|
|
||||||
// Character based displays can have different extended charsets.
|
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
||||||
#define DISPLAY_CHARSET_HD44780_JAPAN // "ääööüüß23°"
|
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
||||||
//#define DISPLAY_CHARSET_HD44780_WESTERN // "ÄäÖöÜüß²³°" if you see a '~' instead of a 'arrow_right' at the right of submenuitems - this is the right one.
|
// See also documentation/LCDLanguageFont.md
|
||||||
|
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_WESTERN
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_CYRILLIC
|
||||||
|
|
||||||
//#define ULTRA_LCD //general LCD support, also 16x2
|
//#define ULTRA_LCD //general LCD support, also 16x2
|
||||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||||
|
@ -619,6 +623,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||||
|
// 0 to disable buzzer feedback
|
||||||
|
|
||||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||||
// http://reprap.org/wiki/PanelOne
|
// http://reprap.org/wiki/PanelOne
|
||||||
|
@ -673,7 +678,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
// Shift register panels
|
// Shift register panels
|
||||||
// ---------------------
|
// ---------------------
|
||||||
// 2 wire Non-latching LCD SR from:
|
// 2 wire Non-latching LCD SR from:
|
||||||
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
||||||
|
|
||||||
//#define SAV_3DLCD
|
//#define SAV_3DLCD
|
||||||
|
|
||||||
|
@ -681,7 +686,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define FAST_PWM_FAN
|
//#define FAST_PWM_FAN
|
||||||
|
|
||||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||||
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
|
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||||
//#define FAN_SOFT_PWM
|
//#define FAN_SOFT_PWM
|
||||||
|
|
||||||
|
@ -735,9 +740,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
* Support for a filament diameter sensor
|
* Support for a filament diameter sensor
|
||||||
* Also allows adjustment of diameter at print time (vs at slicing)
|
* Also allows adjustment of diameter at print time (vs at slicing)
|
||||||
* Single extruder only at this point (extruder 0)
|
* Single extruder only at this point (extruder 0)
|
||||||
*
|
*
|
||||||
* Motherboards
|
* Motherboards
|
||||||
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
||||||
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
||||||
* 301 - Rambo - uses Analog input 3
|
* 301 - Rambo - uses Analog input 3
|
||||||
* Note may require analog pins to be defined for different motherboards
|
* Note may require analog pins to be defined for different motherboards
|
||||||
|
@ -754,7 +759,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM)
|
#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM)
|
||||||
|
|
||||||
//defines used in the code
|
//defines used in the code
|
||||||
#define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially
|
#define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially
|
||||||
|
|
||||||
//When using an LCD, uncomment the line below to display the Filament sensor data on the last line instead of status. Status will appear for 5 sec.
|
//When using an LCD, uncomment the line below to display the Filament sensor data on the last line instead of status. Status will appear for 5 sec.
|
||||||
//#define FILAMENT_LCD_DISPLAY
|
//#define FILAMENT_LCD_DISPLAY
|
||||||
|
|
|
@ -77,10 +77,10 @@
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
// Multiple extruders can be assigned to the same pin in which case
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
// the fan will turn on when any selected extruder is above the threshold.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
@ -100,6 +100,30 @@
|
||||||
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
||||||
//#define Z_DUAL_STEPPER_DRIVERS
|
//#define Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
// Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper.
|
||||||
|
// That way the machine is capable to align the bed during home, since both Z steppers are homed.
|
||||||
|
// There is also an implementation of M666 (software endstops adjustment) to this feature.
|
||||||
|
// After Z homing, this adjustment is applied to just one of the steppers in order to align the bed.
|
||||||
|
// One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2.
|
||||||
|
// If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive.
|
||||||
|
// Play a little bit with small adjustments (0.5mm) and check the behaviour.
|
||||||
|
// The M119 (endstops report) will start reporting the Z2 Endstop as well.
|
||||||
|
|
||||||
|
#define Z_DUAL_ENDSTOPS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_ENDSTOPS
|
||||||
|
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
|
||||||
|
#define Z2_DIR_PIN E2_DIR_PIN
|
||||||
|
#define Z2_ENABLE_PIN E2_ENABLE_PIN
|
||||||
|
#define Z2_MAX_PIN 36 //Endstop used for Z2 axis. In this case I'm using XMAX in a Rumba Board (pin 36)
|
||||||
|
const bool Z2_MAX_ENDSTOP_INVERTING = false;
|
||||||
|
#define DISABLE_XMAX_ENDSTOP //Better to disable the XMAX to avoid conflict. Just rename "XMAX_ENDSTOP" by the endstop you are using for Z2 axis.
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
// Same again but for Y Axis.
|
// Same again but for Y Axis.
|
||||||
//#define Y_DUAL_STEPPER_DRIVERS
|
//#define Y_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
@ -112,41 +136,41 @@
|
||||||
// allowing faster printing speeds.
|
// allowing faster printing speeds.
|
||||||
//#define DUAL_X_CARRIAGE
|
//#define DUAL_X_CARRIAGE
|
||||||
#ifdef DUAL_X_CARRIAGE
|
#ifdef DUAL_X_CARRIAGE
|
||||||
// Configuration for second X-carriage
|
// Configuration for second X-carriage
|
||||||
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
||||||
// the second x-carriage always homes to the maximum endstop.
|
// the second x-carriage always homes to the maximum endstop.
|
||||||
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||||
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
||||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||||
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
||||||
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
||||||
// without modifying the firmware (through the "M218 T1 X???" command).
|
// without modifying the firmware (through the "M218 T1 X???" command).
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
||||||
#define X2_ENABLE_PIN 29
|
#define X2_ENABLE_PIN 29
|
||||||
#define X2_STEP_PIN 25
|
#define X2_STEP_PIN 25
|
||||||
#define X2_DIR_PIN 23
|
#define X2_DIR_PIN 23
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
||||||
|
|
||||||
// Default settings in "Auto-park Mode"
|
// Default settings in "Auto-park Mode"
|
||||||
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
||||||
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
||||||
|
|
||||||
// Default x offset in duplication mode (typically set to half print bed width)
|
// Default x offset in duplication mode (typically set to half print bed width)
|
||||||
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
||||||
|
|
||||||
#endif //DUAL_X_CARRIAGE
|
#endif //DUAL_X_CARRIAGE
|
||||||
|
|
||||||
|
@ -159,8 +183,6 @@
|
||||||
|
|
||||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||||
|
|
||||||
#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step)
|
|
||||||
|
|
||||||
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
||||||
#define INVERT_X_STEP_PIN false
|
#define INVERT_X_STEP_PIN false
|
||||||
#define INVERT_Y_STEP_PIN false
|
#define INVERT_Y_STEP_PIN false
|
||||||
|
@ -212,34 +234,44 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
||||||
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
|
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
|
||||||
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
|
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
|
||||||
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
||||||
|
|
||||||
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
||||||
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
||||||
|
|
||||||
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
#ifdef SDSUPPORT
|
||||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
|
||||||
|
|
||||||
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
||||||
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
||||||
// using:
|
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
||||||
//#define MENU_ADDAUTOSTART
|
// be commented out otherwise
|
||||||
|
#define SDCARDDETECTINVERTED
|
||||||
|
|
||||||
// Show a progress bar on the LCD when printing from SD?
|
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||||
//#define LCD_PROGRESS_BAR
|
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
||||||
|
|
||||||
#ifdef LCD_PROGRESS_BAR
|
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
||||||
// Amount of time (ms) to show the bar
|
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
||||||
#define PROGRESS_BAR_BAR_TIME 2000
|
// using:
|
||||||
// Amount of time (ms) to show the status message
|
//#define MENU_ADDAUTOSTART
|
||||||
#define PROGRESS_BAR_MSG_TIME 3000
|
|
||||||
// Amount of time (ms) to retain the status message (0=forever)
|
// Show a progress bar on HD44780 LCDs for SD printing
|
||||||
#define PROGRESS_MSG_EXPIRE 0
|
//#define LCD_PROGRESS_BAR
|
||||||
// Enable this to show messages for MSG_TIME then hide them
|
|
||||||
//#define PROGRESS_MSG_ONCE
|
#ifdef LCD_PROGRESS_BAR
|
||||||
#endif
|
// Amount of time (ms) to show the bar
|
||||||
|
#define PROGRESS_BAR_BAR_TIME 2000
|
||||||
|
// Amount of time (ms) to show the status message
|
||||||
|
#define PROGRESS_BAR_MSG_TIME 3000
|
||||||
|
// Amount of time (ms) to retain the status message (0=forever)
|
||||||
|
#define PROGRESS_MSG_EXPIRE 0
|
||||||
|
// Enable this to show messages for MSG_TIME then hide them
|
||||||
|
//#define PROGRESS_MSG_ONCE
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
|
|
||||||
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||||
//#define USE_WATCHDOG
|
//#define USE_WATCHDOG
|
||||||
|
@ -285,12 +317,6 @@
|
||||||
|
|
||||||
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
||||||
|
|
||||||
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
|
||||||
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
|
||||||
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
|
||||||
// be commented out otherwise
|
|
||||||
#define SDCARDDETECTINVERTED
|
|
||||||
|
|
||||||
// Control heater 0 and heater 1 in parallel.
|
// Control heater 0 and heater 1 in parallel.
|
||||||
//#define HEATERS_PARALLEL
|
//#define HEATERS_PARALLEL
|
||||||
|
|
||||||
|
@ -300,7 +326,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
|
|
||||||
// The number of linear motions that can be in the plan at any give time.
|
// The number of linear motions that can be in the plan at any give time.
|
||||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
||||||
#if defined SDSUPPORT
|
#ifdef SDSUPPORT
|
||||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||||
#else
|
#else
|
||||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||||
|
@ -322,9 +348,11 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#ifdef FWRETRACT
|
#ifdef FWRETRACT
|
||||||
#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
|
#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
|
||||||
#define RETRACT_LENGTH 3 //default retract length (positive mm)
|
#define RETRACT_LENGTH 3 //default retract length (positive mm)
|
||||||
|
#define RETRACT_LENGTH_SWAP 13 //default swap retract length (positive mm), for extruder change
|
||||||
#define RETRACT_FEEDRATE 35 //default feedrate for retracting (mm/s)
|
#define RETRACT_FEEDRATE 35 //default feedrate for retracting (mm/s)
|
||||||
#define RETRACT_ZLIFT 0 //default retract Z-lift
|
#define RETRACT_ZLIFT 0 //default retract Z-lift
|
||||||
#define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering)
|
#define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering)
|
||||||
|
#define RETRACT_RECOVER_LENGTH_SWAP 0 //default additional swap recover length (mm, added to retract length when recovering from extruder change)
|
||||||
#define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s)
|
#define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -340,6 +368,139 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have TMC26X motor drivers.
|
||||||
|
* you need to import the TMC26XStepper library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_TMCDRIVER
|
||||||
|
#ifdef HAVE_TMCDRIVER
|
||||||
|
|
||||||
|
// #define X_IS_TMC
|
||||||
|
#define X_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define X2_IS_TMC
|
||||||
|
#define X2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y_IS_TMC
|
||||||
|
#define Y_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y2_IS_TMC
|
||||||
|
#define Y2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z_IS_TMC
|
||||||
|
#define Z_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z2_IS_TMC
|
||||||
|
#define Z2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E0_IS_TMC
|
||||||
|
#define E0_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E0_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E1_IS_TMC
|
||||||
|
#define E1_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E1_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E2_IS_TMC
|
||||||
|
#define E2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E3_IS_TMC
|
||||||
|
#define E3_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E3_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have L6470 motor drivers.
|
||||||
|
* you need to import the L6470 library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_L6470DRIVER
|
||||||
|
#ifdef HAVE_L6470DRIVER
|
||||||
|
|
||||||
|
// #define X_IS_L6470
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define X2_IS_L6470
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y_IS_L6470
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y2_IS_L6470
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z_IS_L6470
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z2_IS_L6470
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E0_IS_L6470
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E1_IS_L6470
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E2_IS_L6470
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E3_IS_L6470
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
#include "Conditionals.h"
|
#include "Conditionals.h"
|
||||||
#include "SanityCheck.h"
|
#include "SanityCheck.h"
|
||||||
|
|
||||||
|
|
|
@ -104,7 +104,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
//
|
||||||
|
@ -118,7 +118,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
// 1010 is Pt1000 with 1k pullup (non standard)
|
||||||
// 147 is Pt100 with 4k7 pullup
|
// 147 is Pt100 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
// 110 is Pt100 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
// Use it for Testing or Development purposes. NEVER for production machine.
|
||||||
// #define DUMMY_THERMISTOR_998_VALUE 25
|
// #define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
// #define DUMMY_THERMISTOR_999_VALUE 100
|
// #define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
@ -269,15 +269,15 @@ The issue: If a thermistor come off, it will read a lower temperature than actua
|
||||||
The system will turn the heater on forever, burning up the filament and anything
|
The system will turn the heater on forever, burning up the filament and anything
|
||||||
else around.
|
else around.
|
||||||
|
|
||||||
After the temperature reaches the target for the first time, this feature will
|
After the temperature reaches the target for the first time, this feature will
|
||||||
start measuring for how long the current temperature stays below the target
|
start measuring for how long the current temperature stays below the target
|
||||||
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
||||||
|
|
||||||
If it stays longer than _PERIOD, it means the thermistor temperature
|
If it stays longer than _PERIOD, it means the thermistor temperature
|
||||||
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
||||||
safe side, the system will he halt.
|
safe side, the system will he halt.
|
||||||
|
|
||||||
Bear in mind the count down will just start AFTER the first time the
|
Bear in mind the count down will just start AFTER the first time the
|
||||||
thermistor temperature is over the target, so you will have no problem if
|
thermistor temperature is over the target, so you will have no problem if
|
||||||
your extruder heater takes 2 minutes to hit the target on heating.
|
your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
|
|
||||||
|
@ -320,7 +320,7 @@ your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
// #define ENDSTOPPULLUP_ZMIN
|
// #define ENDSTOPPULLUP_ZMIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
|
@ -343,13 +343,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define DISABLE_E false // For all extruders
|
#define DISABLE_E false // For all extruders
|
||||||
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
||||||
|
|
||||||
#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||||
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
|
#define INVERT_X_DIR true
|
||||||
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
|
#define INVERT_Y_DIR false
|
||||||
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_Z_DIR true
|
||||||
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E0_DIR false
|
||||||
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E1_DIR false
|
||||||
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E2_DIR false
|
||||||
|
#define INVERT_E3_DIR false
|
||||||
|
|
||||||
// ENDSTOP SETTINGS:
|
// ENDSTOP SETTINGS:
|
||||||
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
||||||
|
@ -361,12 +362,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
||||||
|
|
||||||
// Travel limits after homing (units are in mm)
|
// Travel limits after homing (units are in mm)
|
||||||
#define X_MAX_POS 297
|
|
||||||
#define X_MIN_POS 0
|
#define X_MIN_POS 0
|
||||||
#define Y_MAX_POS 210
|
|
||||||
#define Y_MIN_POS 0
|
#define Y_MIN_POS 0
|
||||||
#define Z_MAX_POS 200
|
|
||||||
#define Z_MIN_POS 0
|
#define Z_MIN_POS 0
|
||||||
|
#define X_MAX_POS 297
|
||||||
|
#define Y_MAX_POS 210
|
||||||
|
#define Z_MAX_POS 200
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Filament Runout Sensor ======================
|
//============================= Filament Runout Sensor ======================
|
||||||
|
@ -427,12 +428,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define BACK_PROBE_BED_POSITION 170
|
#define BACK_PROBE_BED_POSITION 170
|
||||||
|
|
||||||
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
||||||
|
|
||||||
// Set the number of grid points per dimension
|
// Set the number of grid points per dimension
|
||||||
// You probably don't need more than 3 (squared=9)
|
// You probably don't need more than 3 (squared=9)
|
||||||
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
||||||
|
|
||||||
|
|
||||||
#else // !AUTO_BED_LEVELING_GRID
|
#else // !AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
// Arbitrary points to probe. A simple cross-product
|
// Arbitrary points to probe. A simple cross-product
|
||||||
|
@ -446,11 +446,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#endif // AUTO_BED_LEVELING_GRID
|
#endif // AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
|
|
||||||
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
||||||
// X and Y offsets must be integers
|
// X and Y offsets must be integers
|
||||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // -left +right
|
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Probe on: -left +right
|
||||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // -front +behind
|
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Probe on: -front +behind
|
||||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
||||||
|
@ -458,10 +457,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
||||||
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
||||||
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
||||||
|
|
||||||
|
// #define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" //These commands will be executed in the end of G29 routine.
|
||||||
|
//Useful to retract a deployable probe.
|
||||||
|
|
||||||
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
||||||
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
@ -496,12 +498,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
||||||
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
||||||
|
|
||||||
//Manual homing switch locations:
|
// Manual homing switch locations:
|
||||||
// For deltabots this means top and center of the Cartesian print volume.
|
// For deltabots this means top and center of the Cartesian print volume.
|
||||||
#define MANUAL_X_HOME_POS 0
|
#ifdef MANUAL_HOME_POSITIONS
|
||||||
#define MANUAL_Y_HOME_POS 0
|
#define MANUAL_X_HOME_POS 0
|
||||||
#define MANUAL_Z_HOME_POS 0
|
#define MANUAL_Y_HOME_POS 0
|
||||||
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
#define MANUAL_Z_HOME_POS 0
|
||||||
|
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
||||||
|
#endif
|
||||||
|
|
||||||
//// MOVEMENT SETTINGS
|
//// MOVEMENT SETTINGS
|
||||||
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
||||||
|
@ -538,8 +542,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#ifdef CUSTOM_M_CODES
|
#ifdef CUSTOM_M_CODES
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
||||||
#define Z_PROBE_OFFSET_RANGE_MIN -15
|
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||||
#define Z_PROBE_OFFSET_RANGE_MAX -5
|
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -567,13 +571,16 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//==============================LCD and SD support=============================
|
//==============================LCD and SD support=============================
|
||||||
|
|
||||||
// Define your display language below. Replace (en) with your language code and uncomment.
|
// Define your display language below. Replace (en) with your language code and uncomment.
|
||||||
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu
|
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu, kana, kana_utf8, test
|
||||||
// See also language.h
|
// See also language.h
|
||||||
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
||||||
|
|
||||||
// Character based displays can have different extended charsets.
|
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
||||||
#define DISPLAY_CHARSET_HD44780_JAPAN // "ääööüüß23°"
|
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
||||||
//#define DISPLAY_CHARSET_HD44780_WESTERN // "ÄäÖöÜüß²³°" if you see a '~' instead of a 'arrow_right' at the right of submenuitems - this is the right one.
|
// See also documentation/LCDLanguageFont.md
|
||||||
|
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_WESTERN
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_CYRILLIC
|
||||||
|
|
||||||
#define ULTRA_LCD //general LCD support, also 16x2
|
#define ULTRA_LCD //general LCD support, also 16x2
|
||||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||||
|
@ -586,6 +593,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||||
|
// 0 to disable buzzer feedback
|
||||||
|
|
||||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||||
// http://reprap.org/wiki/PanelOne
|
// http://reprap.org/wiki/PanelOne
|
||||||
|
@ -640,7 +648,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
// Shift register panels
|
// Shift register panels
|
||||||
// ---------------------
|
// ---------------------
|
||||||
// 2 wire Non-latching LCD SR from:
|
// 2 wire Non-latching LCD SR from:
|
||||||
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
||||||
|
|
||||||
//#define SAV_3DLCD
|
//#define SAV_3DLCD
|
||||||
|
|
||||||
|
@ -648,7 +656,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define FAST_PWM_FAN
|
//#define FAST_PWM_FAN
|
||||||
|
|
||||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||||
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
|
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||||
//#define FAN_SOFT_PWM
|
//#define FAN_SOFT_PWM
|
||||||
|
|
||||||
|
@ -702,9 +710,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
* Support for a filament diameter sensor
|
* Support for a filament diameter sensor
|
||||||
* Also allows adjustment of diameter at print time (vs at slicing)
|
* Also allows adjustment of diameter at print time (vs at slicing)
|
||||||
* Single extruder only at this point (extruder 0)
|
* Single extruder only at this point (extruder 0)
|
||||||
*
|
*
|
||||||
* Motherboards
|
* Motherboards
|
||||||
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
||||||
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
||||||
* 301 - Rambo - uses Analog input 3
|
* 301 - Rambo - uses Analog input 3
|
||||||
* Note may require analog pins to be defined for different motherboards
|
* Note may require analog pins to be defined for different motherboards
|
||||||
|
|
|
@ -100,6 +100,30 @@
|
||||||
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
||||||
//#define Z_DUAL_STEPPER_DRIVERS
|
//#define Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
// Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper.
|
||||||
|
// That way the machine is capable to align the bed during home, since both Z steppers are homed.
|
||||||
|
// There is also an implementation of M666 (software endstops adjustment) to this feature.
|
||||||
|
// After Z homing, this adjustment is applied to just one of the steppers in order to align the bed.
|
||||||
|
// One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2.
|
||||||
|
// If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive.
|
||||||
|
// Play a little bit with small adjustments (0.5mm) and check the behaviour.
|
||||||
|
// The M119 (endstops report) will start reporting the Z2 Endstop as well.
|
||||||
|
|
||||||
|
#define Z_DUAL_ENDSTOPS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_ENDSTOPS
|
||||||
|
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
|
||||||
|
#define Z2_DIR_PIN E2_DIR_PIN
|
||||||
|
#define Z2_ENABLE_PIN E2_ENABLE_PIN
|
||||||
|
#define Z2_MAX_PIN 36 //Endstop used for Z2 axis. In this case I'm using XMAX in a Rumba Board (pin 36)
|
||||||
|
const bool Z2_MAX_ENDSTOP_INVERTING = false;
|
||||||
|
#define DISABLE_XMAX_ENDSTOP //Better to disable the XMAX to avoid conflict. Just rename "XMAX_ENDSTOP" by the endstop you are using for Z2 axis.
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
// Same again but for Y Axis.
|
// Same again but for Y Axis.
|
||||||
//#define Y_DUAL_STEPPER_DRIVERS
|
//#define Y_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
@ -112,41 +136,41 @@
|
||||||
// allowing faster printing speeds.
|
// allowing faster printing speeds.
|
||||||
//#define DUAL_X_CARRIAGE
|
//#define DUAL_X_CARRIAGE
|
||||||
#ifdef DUAL_X_CARRIAGE
|
#ifdef DUAL_X_CARRIAGE
|
||||||
// Configuration for second X-carriage
|
// Configuration for second X-carriage
|
||||||
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
||||||
// the second x-carriage always homes to the maximum endstop.
|
// the second x-carriage always homes to the maximum endstop.
|
||||||
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||||
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
||||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||||
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
||||||
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
||||||
// without modifying the firmware (through the "M218 T1 X???" command).
|
// without modifying the firmware (through the "M218 T1 X???" command).
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
||||||
#define X2_ENABLE_PIN 29
|
#define X2_ENABLE_PIN 29
|
||||||
#define X2_STEP_PIN 25
|
#define X2_STEP_PIN 25
|
||||||
#define X2_DIR_PIN 23
|
#define X2_DIR_PIN 23
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
||||||
|
|
||||||
// Default settings in "Auto-park Mode"
|
// Default settings in "Auto-park Mode"
|
||||||
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
||||||
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
||||||
|
|
||||||
// Default x offset in duplication mode (typically set to half print bed width)
|
// Default x offset in duplication mode (typically set to half print bed width)
|
||||||
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
||||||
|
|
||||||
#endif //DUAL_X_CARRIAGE
|
#endif //DUAL_X_CARRIAGE
|
||||||
|
|
||||||
|
@ -158,11 +182,7 @@
|
||||||
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
||||||
|
|
||||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||||
#ifdef CONFIG_STEPPERS_TOSHIBA
|
|
||||||
#define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers
|
|
||||||
#else
|
|
||||||
#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step)
|
|
||||||
#endif
|
|
||||||
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
||||||
#define INVERT_X_STEP_PIN false
|
#define INVERT_X_STEP_PIN false
|
||||||
#define INVERT_Y_STEP_PIN false
|
#define INVERT_Y_STEP_PIN false
|
||||||
|
@ -214,34 +234,44 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
||||||
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
|
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
|
||||||
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
|
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
|
||||||
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
||||||
|
|
||||||
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
||||||
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
||||||
|
|
||||||
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
#ifdef SDSUPPORT
|
||||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
|
||||||
|
|
||||||
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
||||||
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
||||||
// using:
|
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
||||||
#define MENU_ADDAUTOSTART
|
// be commented out otherwise
|
||||||
|
#define SDCARDDETECTINVERTED
|
||||||
|
|
||||||
// Show a progress bar on HD44780 LCDs for SD printing
|
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||||
//#define LCD_PROGRESS_BAR
|
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
||||||
|
|
||||||
#ifdef LCD_PROGRESS_BAR
|
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
||||||
// Amount of time (ms) to show the bar
|
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
||||||
#define PROGRESS_BAR_BAR_TIME 2000
|
// using:
|
||||||
// Amount of time (ms) to show the status message
|
//#define MENU_ADDAUTOSTART
|
||||||
#define PROGRESS_BAR_MSG_TIME 3000
|
|
||||||
// Amount of time (ms) to retain the status message (0=forever)
|
// Show a progress bar on HD44780 LCDs for SD printing
|
||||||
#define PROGRESS_MSG_EXPIRE 0
|
//#define LCD_PROGRESS_BAR
|
||||||
// Enable this to show messages for MSG_TIME then hide them
|
|
||||||
//#define PROGRESS_MSG_ONCE
|
#ifdef LCD_PROGRESS_BAR
|
||||||
#endif
|
// Amount of time (ms) to show the bar
|
||||||
|
#define PROGRESS_BAR_BAR_TIME 2000
|
||||||
|
// Amount of time (ms) to show the status message
|
||||||
|
#define PROGRESS_BAR_MSG_TIME 3000
|
||||||
|
// Amount of time (ms) to retain the status message (0=forever)
|
||||||
|
#define PROGRESS_MSG_EXPIRE 0
|
||||||
|
// Enable this to show messages for MSG_TIME then hide them
|
||||||
|
//#define PROGRESS_MSG_ONCE
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
|
|
||||||
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||||
//#define USE_WATCHDOG
|
//#define USE_WATCHDOG
|
||||||
|
@ -279,7 +309,7 @@
|
||||||
#define EXTRUDER_ADVANCE_K .0
|
#define EXTRUDER_ADVANCE_K .0
|
||||||
#define D_FILAMENT 1.75
|
#define D_FILAMENT 1.75
|
||||||
#define STEPS_MM_E 100.47095761381482
|
#define STEPS_MM_E 100.47095761381482
|
||||||
#endif // ADVANCE
|
#endif
|
||||||
|
|
||||||
// Arc interpretation settings:
|
// Arc interpretation settings:
|
||||||
#define MM_PER_ARC_SEGMENT 1
|
#define MM_PER_ARC_SEGMENT 1
|
||||||
|
@ -287,12 +317,6 @@
|
||||||
|
|
||||||
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
||||||
|
|
||||||
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
|
||||||
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
|
||||||
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
|
||||||
// be commented out otherwise
|
|
||||||
#define SDCARDDETECTINVERTED
|
|
||||||
|
|
||||||
// Control heater 0 and heater 1 in parallel.
|
// Control heater 0 and heater 1 in parallel.
|
||||||
//#define HEATERS_PARALLEL
|
//#define HEATERS_PARALLEL
|
||||||
|
|
||||||
|
@ -302,7 +326,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
|
|
||||||
// The number of linear motions that can be in the plan at any give time.
|
// The number of linear motions that can be in the plan at any give time.
|
||||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
||||||
#if defined SDSUPPORT
|
#ifdef SDSUPPORT
|
||||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||||
#else
|
#else
|
||||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||||
|
@ -344,6 +368,139 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have TMC26X motor drivers.
|
||||||
|
* you need to import the TMC26XStepper library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_TMCDRIVER
|
||||||
|
#ifdef HAVE_TMCDRIVER
|
||||||
|
|
||||||
|
// #define X_IS_TMC
|
||||||
|
#define X_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define X2_IS_TMC
|
||||||
|
#define X2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y_IS_TMC
|
||||||
|
#define Y_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y2_IS_TMC
|
||||||
|
#define Y2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z_IS_TMC
|
||||||
|
#define Z_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z2_IS_TMC
|
||||||
|
#define Z2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E0_IS_TMC
|
||||||
|
#define E0_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E0_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E1_IS_TMC
|
||||||
|
#define E1_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E1_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E2_IS_TMC
|
||||||
|
#define E2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E3_IS_TMC
|
||||||
|
#define E3_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E3_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have L6470 motor drivers.
|
||||||
|
* you need to import the L6470 library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_L6470DRIVER
|
||||||
|
#ifdef HAVE_L6470DRIVER
|
||||||
|
|
||||||
|
// #define X_IS_L6470
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define X2_IS_L6470
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y_IS_L6470
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y2_IS_L6470
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z_IS_L6470
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z2_IS_L6470
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E0_IS_L6470
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E1_IS_L6470
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E2_IS_L6470
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E3_IS_L6470
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
#include "Conditionals.h"
|
#include "Conditionals.h"
|
||||||
#include "SanityCheck.h"
|
#include "SanityCheck.h"
|
||||||
|
|
||||||
|
|
|
@ -137,7 +137,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
//
|
||||||
|
@ -151,7 +151,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
// 1010 is Pt1000 with 1k pullup (non standard)
|
||||||
// 147 is Pt100 with 4k7 pullup
|
// 147 is Pt100 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
// 110 is Pt100 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
// Use it for Testing or Development purposes. NEVER for production machine.
|
||||||
// #define DUMMY_THERMISTOR_998_VALUE 25
|
// #define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
// #define DUMMY_THERMISTOR_999_VALUE 100
|
// #define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
@ -297,15 +297,15 @@ The issue: If a thermistor come off, it will read a lower temperature than actua
|
||||||
The system will turn the heater on forever, burning up the filament and anything
|
The system will turn the heater on forever, burning up the filament and anything
|
||||||
else around.
|
else around.
|
||||||
|
|
||||||
After the temperature reaches the target for the first time, this feature will
|
After the temperature reaches the target for the first time, this feature will
|
||||||
start measuring for how long the current temperature stays below the target
|
start measuring for how long the current temperature stays below the target
|
||||||
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
||||||
|
|
||||||
If it stays longer than _PERIOD, it means the thermistor temperature
|
If it stays longer than _PERIOD, it means the thermistor temperature
|
||||||
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
||||||
safe side, the system will he halt.
|
safe side, the system will he halt.
|
||||||
|
|
||||||
Bear in mind the count down will just start AFTER the first time the
|
Bear in mind the count down will just start AFTER the first time the
|
||||||
thermistor temperature is over the target, so you will have no problem if
|
thermistor temperature is over the target, so you will have no problem if
|
||||||
your extruder heater takes 2 minutes to hit the target on heating.
|
your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
|
|
||||||
|
@ -348,7 +348,7 @@ your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
// #define ENDSTOPPULLUP_ZMIN
|
// #define ENDSTOPPULLUP_ZMIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
|
@ -371,19 +371,18 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define DISABLE_E false // For all extruders
|
#define DISABLE_E false // For all extruders
|
||||||
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
||||||
|
|
||||||
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||||
#define INVERT_X_DIR false // DELTA does not invert
|
#define INVERT_X_DIR false // DELTA does not invert
|
||||||
#define INVERT_Y_DIR false
|
#define INVERT_Y_DIR false
|
||||||
#define INVERT_Z_DIR false
|
#define INVERT_Z_DIR false
|
||||||
|
#define INVERT_E0_DIR false
|
||||||
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E1_DIR false
|
||||||
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E2_DIR false
|
||||||
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E3_DIR false
|
||||||
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
|
||||||
|
|
||||||
// ENDSTOP SETTINGS:
|
// ENDSTOP SETTINGS:
|
||||||
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
||||||
// deltas always home to max
|
#define X_HOME_DIR 1 // deltas always home to max
|
||||||
#define X_HOME_DIR 1
|
|
||||||
#define Y_HOME_DIR 1
|
#define Y_HOME_DIR 1
|
||||||
#define Z_HOME_DIR 1
|
#define Z_HOME_DIR 1
|
||||||
|
|
||||||
|
@ -391,12 +390,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
||||||
|
|
||||||
// Travel limits after homing (units are in mm)
|
// Travel limits after homing (units are in mm)
|
||||||
#define X_MAX_POS DELTA_PRINTABLE_RADIUS
|
|
||||||
#define X_MIN_POS -DELTA_PRINTABLE_RADIUS
|
#define X_MIN_POS -DELTA_PRINTABLE_RADIUS
|
||||||
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS
|
|
||||||
#define Y_MIN_POS -DELTA_PRINTABLE_RADIUS
|
#define Y_MIN_POS -DELTA_PRINTABLE_RADIUS
|
||||||
#define Z_MAX_POS MANUAL_Z_HOME_POS
|
|
||||||
#define Z_MIN_POS 0
|
#define Z_MIN_POS 0
|
||||||
|
#define X_MAX_POS DELTA_PRINTABLE_RADIUS
|
||||||
|
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS
|
||||||
|
#define Z_MAX_POS MANUAL_Z_HOME_POS
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Filament Runout Sensor ======================
|
//============================= Filament Runout Sensor ======================
|
||||||
|
@ -430,31 +429,59 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
//#define ENABLE_AUTO_BED_LEVELING // Delete the comment to enable (remove // at the start of the line)
|
//#define ENABLE_AUTO_BED_LEVELING // Delete the comment to enable (remove // at the start of the line)
|
||||||
// Z-Probe Repeatability test is not supported in Deltas yet.
|
//#define Z_PROBE_REPEATABILITY_TEST // Z-Probe Repeatability test is not supported in Deltas yet.
|
||||||
|
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
|
|
||||||
// Deltas only support grid mode
|
// There are 2 different ways to specify probing locations
|
||||||
#define AUTO_BED_LEVELING_GRID
|
//
|
||||||
|
// - "grid" mode
|
||||||
|
// Probe several points in a rectangular grid.
|
||||||
|
// You specify the rectangle and the density of sample points.
|
||||||
|
// This mode is preferred because there are more measurements.
|
||||||
|
//
|
||||||
|
// - "3-point" mode
|
||||||
|
// Probe 3 arbitrary points on the bed (that aren't colinear)
|
||||||
|
// You specify the XY coordinates of all 3 points.
|
||||||
|
|
||||||
#define DELTA_PROBABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
|
// Enable this to sample the bed in a grid (least squares solution)
|
||||||
#define LEFT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
|
// Note: this feature generates 10KB extra code size
|
||||||
#define RIGHT_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
|
#define AUTO_BED_LEVELING_GRID // Deltas only support grid mode
|
||||||
#define BACK_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
|
|
||||||
#define FRONT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
|
|
||||||
|
|
||||||
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
#ifdef AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
// Non-linear bed leveling will be used.
|
#define DELTA_PROBABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
|
||||||
// Compensate by interpolating between the nearest four Z probe values for each point.
|
|
||||||
// Useful for deltas where the print surface may appear like a bowl or dome shape.
|
#define LEFT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
|
||||||
// Works best with ACCURATE_BED_LEVELING_POINTS 5 or higher.
|
#define RIGHT_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
|
||||||
#define AUTO_BED_LEVELING_GRID_POINTS 9
|
#define FRONT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
|
||||||
|
#define BACK_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
|
||||||
|
|
||||||
|
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
||||||
|
|
||||||
|
// Non-linear bed leveling will be used.
|
||||||
|
// Compensate by interpolating between the nearest four Z probe values for each point.
|
||||||
|
// Useful for deltas where the print surface may appear like a bowl or dome shape.
|
||||||
|
// Works best with ACCURATE_BED_LEVELING_POINTS 5 or higher.
|
||||||
|
#define AUTO_BED_LEVELING_GRID_POINTS 9
|
||||||
|
|
||||||
|
#else // !AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
|
// Arbitrary points to probe. A simple cross-product
|
||||||
|
// is used to estimate the plane of the bed.
|
||||||
|
#define ABL_PROBE_PT_1_X 15
|
||||||
|
#define ABL_PROBE_PT_1_Y 180
|
||||||
|
#define ABL_PROBE_PT_2_X 15
|
||||||
|
#define ABL_PROBE_PT_2_Y 20
|
||||||
|
#define ABL_PROBE_PT_3_X 170
|
||||||
|
#define ABL_PROBE_PT_3_Y 20
|
||||||
|
|
||||||
|
#endif // AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
||||||
// X and Y offsets must be integers
|
// X and Y offsets must be integers
|
||||||
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // -left +right
|
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // Probe on: -left +right
|
||||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // -front +behind
|
#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Probe on: -front +behind
|
||||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // -below (always!)
|
#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // -below (always!)
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
||||||
|
@ -465,7 +492,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
||||||
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
||||||
#define Z_RAISE_AFTER_PROBING 50 //How much the extruder will be raised after the last probing point.
|
#define Z_RAISE_AFTER_PROBING 50 //How much the extruder will be raised after the last probing point.
|
||||||
|
|
||||||
|
// #define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" //These commands will be executed in the end of G29 routine.
|
||||||
|
//Useful to retract a deployable probe.
|
||||||
|
|
||||||
|
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
||||||
|
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
// Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
// Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
||||||
// Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
|
// Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
|
||||||
//#define Z_PROBE_ALLEN_KEY
|
//#define Z_PROBE_ALLEN_KEY
|
||||||
|
@ -507,16 +540,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#endif // ENABLE_AUTO_BED_LEVELING
|
#endif // ENABLE_AUTO_BED_LEVELING
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
// The position of the homing switches
|
// The position of the homing switches
|
||||||
#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
||||||
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
||||||
|
|
||||||
//Manual homing switch locations:
|
// Manual homing switch locations:
|
||||||
// For deltabots this means top and center of the Cartesian print volume.
|
// For deltabots this means top and center of the Cartesian print volume.
|
||||||
#define MANUAL_X_HOME_POS 0
|
#ifdef MANUAL_HOME_POSITIONS
|
||||||
#define MANUAL_Y_HOME_POS 0
|
#define MANUAL_X_HOME_POS 0
|
||||||
#define MANUAL_Z_HOME_POS 250 // For delta: Distance between nozzle and print surface after homing.
|
#define MANUAL_Y_HOME_POS 0
|
||||||
|
#define MANUAL_Z_HOME_POS 250 // For delta: Distance between nozzle and print surface after homing.
|
||||||
|
#endif
|
||||||
|
|
||||||
//// MOVEMENT SETTINGS
|
//// MOVEMENT SETTINGS
|
||||||
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
||||||
|
@ -555,8 +589,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#ifdef CUSTOM_M_CODES
|
#ifdef CUSTOM_M_CODES
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
||||||
#define Z_PROBE_OFFSET_RANGE_MIN -15
|
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||||
#define Z_PROBE_OFFSET_RANGE_MAX -5
|
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -588,7 +622,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
// See also language.h
|
// See also language.h
|
||||||
#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
||||||
|
|
||||||
// Chose ONE of the next three charsets. This has to match your hardware. In case of a full graphic display this information is not important.
|
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
||||||
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
||||||
// See also documentation/LCDLanguageFont.md
|
// See also documentation/LCDLanguageFont.md
|
||||||
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||||
|
@ -606,6 +640,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||||
|
// 0 to disable buzzer feedback
|
||||||
|
|
||||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||||
// http://reprap.org/wiki/PanelOne
|
// http://reprap.org/wiki/PanelOne
|
||||||
|
@ -667,7 +702,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
// Shift register panels
|
// Shift register panels
|
||||||
// ---------------------
|
// ---------------------
|
||||||
// 2 wire Non-latching LCD SR from:
|
// 2 wire Non-latching LCD SR from:
|
||||||
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
||||||
|
|
||||||
//#define SAV_3DLCD
|
//#define SAV_3DLCD
|
||||||
|
|
||||||
|
@ -675,7 +710,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define FAST_PWM_FAN
|
//#define FAST_PWM_FAN
|
||||||
|
|
||||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||||
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
|
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||||
//#define FAN_SOFT_PWM
|
//#define FAN_SOFT_PWM
|
||||||
|
|
||||||
|
@ -729,9 +764,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
* Support for a filament diameter sensor
|
* Support for a filament diameter sensor
|
||||||
* Also allows adjustment of diameter at print time (vs at slicing)
|
* Also allows adjustment of diameter at print time (vs at slicing)
|
||||||
* Single extruder only at this point (extruder 0)
|
* Single extruder only at this point (extruder 0)
|
||||||
*
|
*
|
||||||
* Motherboards
|
* Motherboards
|
||||||
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
||||||
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
||||||
* 301 - Rambo - uses Analog input 3
|
* 301 - Rambo - uses Analog input 3
|
||||||
* Note may require analog pins to be defined for different motherboards
|
* Note may require analog pins to be defined for different motherboards
|
||||||
|
@ -748,7 +783,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM)
|
#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM)
|
||||||
|
|
||||||
//defines used in the code
|
//defines used in the code
|
||||||
#define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially
|
#define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially
|
||||||
|
|
||||||
//When using an LCD, uncomment the line below to display the Filament sensor data on the last line instead of status. Status will appear for 5 sec.
|
//When using an LCD, uncomment the line below to display the Filament sensor data on the last line instead of status. Status will appear for 5 sec.
|
||||||
//#define FILAMENT_LCD_DISPLAY
|
//#define FILAMENT_LCD_DISPLAY
|
||||||
|
|
|
@ -1,350 +0,0 @@
|
||||||
#ifndef CONFIGURATION_ADV_H
|
|
||||||
#define CONFIGURATION_ADV_H
|
|
||||||
|
|
||||||
#include "Conditionals.h"
|
|
||||||
|
|
||||||
//===========================================================================
|
|
||||||
//=============================Thermal Settings ============================
|
|
||||||
//===========================================================================
|
|
||||||
|
|
||||||
#ifdef BED_LIMIT_SWITCHING
|
|
||||||
#define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
|
|
||||||
#endif
|
|
||||||
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
|
|
||||||
|
|
||||||
//// Heating sanity check:
|
|
||||||
// This waits for the watchperiod in milliseconds whenever an M104 or M109 increases the target temperature
|
|
||||||
// If the temperature has not increased at the end of that period, the target temperature is set to zero.
|
|
||||||
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and the current temperature
|
|
||||||
// differ by at least 2x WATCH_TEMP_INCREASE
|
|
||||||
//#define WATCH_TEMP_PERIOD 40000 //40 seconds
|
|
||||||
//#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds
|
|
||||||
|
|
||||||
#ifdef PIDTEMP
|
|
||||||
// this adds an experimental additional term to the heatingpower, proportional to the extrusion speed.
|
|
||||||
// if Kc is choosen well, the additional required power due to increased melting should be compensated.
|
|
||||||
#define PID_ADD_EXTRUSION_RATE
|
|
||||||
#ifdef PID_ADD_EXTRUSION_RATE
|
|
||||||
#define DEFAULT_Kc (1) //heatingpower=Kc*(e_speed)
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
|
|
||||||
|
|
||||||
//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode.
|
|
||||||
//The maximum buffered steps/sec of the extruder motor are called "se".
|
|
||||||
//You enter the autotemp mode by a M109 S<mintemp> T<maxtemp> F<factor>
|
|
||||||
// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp
|
|
||||||
// you exit the value by any M109 without F*
|
|
||||||
// Also, if the temperature is set to a value <mintemp, it is not changed by autotemp.
|
|
||||||
// on an ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
|
|
||||||
#define AUTOTEMP
|
|
||||||
#ifdef AUTOTEMP
|
|
||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
|
||||||
#endif
|
|
||||||
|
|
||||||
//Show Temperature ADC value
|
|
||||||
//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
|
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
|
||||||
|
|
||||||
// extruder run-out prevention.
|
|
||||||
//if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
|
|
||||||
//#define EXTRUDER_RUNOUT_PREVENT
|
|
||||||
#define EXTRUDER_RUNOUT_MINTEMP 190
|
|
||||||
#define EXTRUDER_RUNOUT_SECONDS 30.
|
|
||||||
#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
|
|
||||||
#define EXTRUDER_RUNOUT_SPEED 1500. //extrusion speed
|
|
||||||
#define EXTRUDER_RUNOUT_EXTRUDE 100
|
|
||||||
|
|
||||||
//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
|
|
||||||
//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
|
|
||||||
#define TEMP_SENSOR_AD595_OFFSET 0.0
|
|
||||||
#define TEMP_SENSOR_AD595_GAIN 1.0
|
|
||||||
|
|
||||||
//This is for controlling a fan to cool down the stepper drivers
|
|
||||||
//it will turn on when any driver is enabled
|
|
||||||
//and turn off after the set amount of seconds from last driver being disabled again
|
|
||||||
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable)
|
|
||||||
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run
|
|
||||||
#define CONTROLLERFAN_SPEED 255 // == full speed
|
|
||||||
|
|
||||||
// When first starting the main fan, run it at full speed for the
|
|
||||||
// given number of milliseconds. This gets the fan spinning reliably
|
|
||||||
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
|
|
||||||
//#define FAN_KICKSTART_TIME 100
|
|
||||||
|
|
||||||
// Extruder cooling fans
|
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
|
||||||
|
|
||||||
|
|
||||||
//===========================================================================
|
|
||||||
//=============================Mechanical Settings===========================
|
|
||||||
//===========================================================================
|
|
||||||
|
|
||||||
#define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing
|
|
||||||
|
|
||||||
//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats.
|
|
||||||
|
|
||||||
// A single Z stepper driver is usually used to drive 2 stepper motors.
|
|
||||||
// Uncomment this define to utilize a separate stepper driver for each Z axis motor.
|
|
||||||
// Only a few motherboards support this, like RAMPS, which have dual extruder support (the 2nd, often unused, extruder driver is used
|
|
||||||
// to control the 2nd Z axis stepper motor). The pins are currently only defined for a RAMPS motherboards.
|
|
||||||
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
|
||||||
//#define Z_DUAL_STEPPER_DRIVERS
|
|
||||||
|
|
||||||
// Same again but for Y Axis.
|
|
||||||
//#define Y_DUAL_STEPPER_DRIVERS
|
|
||||||
|
|
||||||
// Define if the two Y drives need to rotate in opposite directions
|
|
||||||
#define INVERT_Y2_VS_Y_DIR true
|
|
||||||
|
|
||||||
// Enable this for dual x-carriage printers.
|
|
||||||
// A dual x-carriage design has the advantage that the inactive extruder can be parked which
|
|
||||||
// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage
|
|
||||||
// allowing faster printing speeds.
|
|
||||||
//#define DUAL_X_CARRIAGE
|
|
||||||
#ifdef DUAL_X_CARRIAGE
|
|
||||||
// Configuration for second X-carriage
|
|
||||||
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
|
||||||
// the second x-carriage always homes to the maximum endstop.
|
|
||||||
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
|
||||||
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
|
||||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
|
||||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
|
||||||
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
|
||||||
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
|
||||||
// without modifying the firmware (through the "M218 T1 X???" command).
|
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
|
||||||
|
|
||||||
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
|
||||||
#define X2_ENABLE_PIN 29
|
|
||||||
#define X2_STEP_PIN 25
|
|
||||||
#define X2_DIR_PIN 23
|
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
|
||||||
// that additional slicer support is not required. (M605 S1)
|
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
|
||||||
|
|
||||||
// Default settings in "Auto-park Mode"
|
|
||||||
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
|
||||||
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
|
||||||
|
|
||||||
// Default x offset in duplication mode (typically set to half print bed width)
|
|
||||||
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
|
||||||
|
|
||||||
#endif //DUAL_X_CARRIAGE
|
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
|
||||||
#define X_HOME_RETRACT_MM 5
|
|
||||||
#define Y_HOME_RETRACT_MM 5
|
|
||||||
#define Z_HOME_RETRACT_MM 5 // deltas need the same for all three axis
|
|
||||||
#define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
|
||||||
|
|
||||||
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
|
||||||
|
|
||||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
|
||||||
|
|
||||||
#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step)
|
|
||||||
|
|
||||||
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
|
||||||
#define INVERT_X_STEP_PIN false
|
|
||||||
#define INVERT_Y_STEP_PIN false
|
|
||||||
#define INVERT_Z_STEP_PIN false
|
|
||||||
#define INVERT_E_STEP_PIN false
|
|
||||||
|
|
||||||
// Default stepper release if idle. Set to 0 to deactivate.
|
|
||||||
#define DEFAULT_STEPPER_DEACTIVE_TIME 60
|
|
||||||
|
|
||||||
#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
|
|
||||||
#define DEFAULT_MINTRAVELFEEDRATE 0.0
|
|
||||||
|
|
||||||
// Feedrates for manual moves along X, Y, Z, E from panel
|
|
||||||
#ifdef ULTIPANEL
|
|
||||||
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// minimum time in microseconds that a movement needs to take if the buffer is emptied.
|
|
||||||
#define DEFAULT_MINSEGMENTTIME 20000
|
|
||||||
|
|
||||||
// If defined the movements slow down when the look ahead buffer is only half full
|
|
||||||
// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second)
|
|
||||||
//#define SLOWDOWN
|
|
||||||
|
|
||||||
// Frequency limit
|
|
||||||
// See nophead's blog for more info
|
|
||||||
// Not working O
|
|
||||||
//#define XY_FREQUENCY_LIMIT 15
|
|
||||||
|
|
||||||
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
|
|
||||||
// of the buffer and all stops. This should not be much greater than zero and should only be changed
|
|
||||||
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
|
|
||||||
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec)
|
|
||||||
|
|
||||||
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
|
|
||||||
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
|
|
||||||
|
|
||||||
// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards)
|
|
||||||
#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
|
||||||
|
|
||||||
// uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
|
||||||
//#define DIGIPOT_I2C
|
|
||||||
// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8
|
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8
|
|
||||||
// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}
|
|
||||||
|
|
||||||
//===========================================================================
|
|
||||||
//=============================Additional Features===========================
|
|
||||||
//===========================================================================
|
|
||||||
|
|
||||||
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
|
||||||
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
|
|
||||||
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
|
|
||||||
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
|
||||||
|
|
||||||
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
|
||||||
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
|
||||||
|
|
||||||
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
|
||||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
|
||||||
|
|
||||||
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the filesystem block order.
|
|
||||||
// if a file is deleted, it frees a block. hence, the order is not purely cronological. To still have auto0.g accessible, there is again the option to do that.
|
|
||||||
// using:
|
|
||||||
//#define MENU_ADDAUTOSTART
|
|
||||||
|
|
||||||
// Show a progress bar on the LCD when printing from SD
|
|
||||||
//#define LCD_PROGRESS_BAR
|
|
||||||
|
|
||||||
#ifdef LCD_PROGRESS_BAR
|
|
||||||
// Amount of time (ms) to show the bar
|
|
||||||
#define PROGRESS_BAR_BAR_TIME 2000
|
|
||||||
// Amount of time (ms) to show the status message
|
|
||||||
#define PROGRESS_BAR_MSG_TIME 2000
|
|
||||||
// Amount of time (ms) to retain the status message (0=forever)
|
|
||||||
#define PROGRESS_MSG_EXPIRE 0
|
|
||||||
// Enable this to show messages for MSG_TIME then hide them
|
|
||||||
//#define PROGRESS_MSG_ONCE
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// The hardware watchdog should reset the Microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
|
||||||
//#define USE_WATCHDOG
|
|
||||||
|
|
||||||
#ifdef USE_WATCHDOG
|
|
||||||
// If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on.
|
|
||||||
// The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset.
|
|
||||||
// However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled.
|
|
||||||
//#define WATCHDOG_RESET_MANUAL
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// Enable the option to stop SD printing when hitting and endstops, needs to be enabled from the LCD menu when this option is enabled.
|
|
||||||
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
|
|
||||||
|
|
||||||
// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
|
|
||||||
// it can e.g. be used to change z-positions in the print startup phase in realtime
|
|
||||||
// does not respect endstops!
|
|
||||||
//#define BABYSTEPPING
|
|
||||||
#ifdef BABYSTEPPING
|
|
||||||
#define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions
|
|
||||||
#define BABYSTEP_INVERT_Z false //true for inverse movements in Z
|
|
||||||
#define BABYSTEP_Z_MULTIPLICATOR 2 //faster z movements
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// extruder advance constant (s2/mm3)
|
|
||||||
//
|
|
||||||
// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K * cubic mm per second ^ 2
|
|
||||||
//
|
|
||||||
// hooke's law says: force = k * distance
|
|
||||||
// Bernoulli's principle says: v ^ 2 / 2 + g . h + pressure / density = constant
|
|
||||||
// so: v ^ 2 is proportional to number of steps we advance the extruder
|
|
||||||
//#define ADVANCE
|
|
||||||
|
|
||||||
#ifdef ADVANCE
|
|
||||||
#define EXTRUDER_ADVANCE_K .0
|
|
||||||
#define D_FILAMENT 2.85
|
|
||||||
#define STEPS_MM_E 836
|
|
||||||
#endif // ADVANCE
|
|
||||||
|
|
||||||
// Arc interpretation settings:
|
|
||||||
#define MM_PER_ARC_SEGMENT 1
|
|
||||||
#define N_ARC_CORRECTION 25
|
|
||||||
|
|
||||||
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
|
||||||
|
|
||||||
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
|
||||||
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
|
||||||
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
|
||||||
// be commented out otherwise
|
|
||||||
#define SDCARDDETECTINVERTED
|
|
||||||
|
|
||||||
// Control heater 0 and heater 1 in parallel.
|
|
||||||
//#define HEATERS_PARALLEL
|
|
||||||
|
|
||||||
//===========================================================================
|
|
||||||
//=============================Buffers ============================
|
|
||||||
//===========================================================================
|
|
||||||
|
|
||||||
// The number of linear motions that can be in the plan at any give time.
|
|
||||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ringbuffering.
|
|
||||||
#if defined SDSUPPORT
|
|
||||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
|
||||||
#else
|
|
||||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
|
||||||
#endif
|
|
||||||
|
|
||||||
|
|
||||||
//The ASCII buffer for recieving from the serial:
|
|
||||||
#define MAX_CMD_SIZE 96
|
|
||||||
#define BUFSIZE 4
|
|
||||||
|
|
||||||
|
|
||||||
// Firmware based and LCD controled retract
|
|
||||||
// M207 and M208 can be used to define parameters for the retraction.
|
|
||||||
// The retraction can be called by the slicer using G10 and G11
|
|
||||||
// until then, intended retractions can be detected by moves that only extrude and the direction.
|
|
||||||
// the moves are than replaced by the firmware controlled ones.
|
|
||||||
|
|
||||||
// #define FWRETRACT //ONLY PARTIALLY TESTED
|
|
||||||
#ifdef FWRETRACT
|
|
||||||
#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
|
|
||||||
#define RETRACT_LENGTH 3 //default retract length (positive mm)
|
|
||||||
#define RETRACT_LENGTH_SWAP 13 //default swap retract length (positive mm), for extruder change
|
|
||||||
#define RETRACT_FEEDRATE 45 //default feedrate for retracting (mm/s)
|
|
||||||
#define RETRACT_ZLIFT 0 //default retract Z-lift
|
|
||||||
#define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering)
|
|
||||||
#define RETRACT_RECOVER_LENGTH_SWAP 0 //default additional swap recover length (mm, added to retract length when recovering from extruder change)
|
|
||||||
#define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// Add support for experimental filament exchange support M600; requires display
|
|
||||||
#ifdef ULTIPANEL
|
|
||||||
//#define FILAMENTCHANGEENABLE
|
|
||||||
#ifdef FILAMENTCHANGEENABLE
|
|
||||||
#define FILAMENTCHANGE_XPOS 3
|
|
||||||
#define FILAMENTCHANGE_YPOS 3
|
|
||||||
#define FILAMENTCHANGE_ZADD 10
|
|
||||||
#define FILAMENTCHANGE_FIRSTRETRACT -2
|
|
||||||
#define FILAMENTCHANGE_FINALRETRACT -100
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#include "Conditionals.h"
|
|
||||||
#include "SanityCheck.h"
|
|
||||||
|
|
||||||
#endif //CONFIGURATION_ADV_H
|
|
|
@ -137,7 +137,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
//
|
||||||
|
@ -151,7 +151,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
// 1010 is Pt1000 with 1k pullup (non standard)
|
||||||
// 147 is Pt100 with 4k7 pullup
|
// 147 is Pt100 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
// 110 is Pt100 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
// Use it for Testing or Development purposes. NEVER for production machine.
|
||||||
// #define DUMMY_THERMISTOR_998_VALUE 25
|
// #define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
// #define DUMMY_THERMISTOR_999_VALUE 100
|
// #define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
@ -297,15 +297,15 @@ The issue: If a thermistor come off, it will read a lower temperature than actua
|
||||||
The system will turn the heater on forever, burning up the filament and anything
|
The system will turn the heater on forever, burning up the filament and anything
|
||||||
else around.
|
else around.
|
||||||
|
|
||||||
After the temperature reaches the target for the first time, this feature will
|
After the temperature reaches the target for the first time, this feature will
|
||||||
start measuring for how long the current temperature stays below the target
|
start measuring for how long the current temperature stays below the target
|
||||||
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
||||||
|
|
||||||
If it stays longer than _PERIOD, it means the thermistor temperature
|
If it stays longer than _PERIOD, it means the thermistor temperature
|
||||||
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
||||||
safe side, the system will he halt.
|
safe side, the system will he halt.
|
||||||
|
|
||||||
Bear in mind the count down will just start AFTER the first time the
|
Bear in mind the count down will just start AFTER the first time the
|
||||||
thermistor temperature is over the target, so you will have no problem if
|
thermistor temperature is over the target, so you will have no problem if
|
||||||
your extruder heater takes 2 minutes to hit the target on heating.
|
your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
|
|
||||||
|
@ -348,7 +348,7 @@ your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
// #define ENDSTOPPULLUP_ZMIN
|
// #define ENDSTOPPULLUP_ZMIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
|
@ -371,19 +371,18 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
#define DISABLE_E false // For all extruders
|
#define DISABLE_E false // For all extruders
|
||||||
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
||||||
|
|
||||||
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||||
#define INVERT_X_DIR false // DELTA does not invert
|
#define INVERT_X_DIR false // DELTA does not invert
|
||||||
#define INVERT_Y_DIR false
|
#define INVERT_Y_DIR false
|
||||||
#define INVERT_Z_DIR false
|
#define INVERT_Z_DIR false
|
||||||
|
#define INVERT_E0_DIR false
|
||||||
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E1_DIR false
|
||||||
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E2_DIR false
|
||||||
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E3_DIR false
|
||||||
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
|
||||||
|
|
||||||
// ENDSTOP SETTINGS:
|
// ENDSTOP SETTINGS:
|
||||||
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
||||||
// deltas always home to max
|
#define X_HOME_DIR 1 // deltas always home to max
|
||||||
#define X_HOME_DIR 1
|
|
||||||
#define Y_HOME_DIR 1
|
#define Y_HOME_DIR 1
|
||||||
#define Z_HOME_DIR 1
|
#define Z_HOME_DIR 1
|
||||||
|
|
||||||
|
@ -391,12 +390,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
||||||
|
|
||||||
// Travel limits after homing (units are in mm)
|
// Travel limits after homing (units are in mm)
|
||||||
#define X_MAX_POS DELTA_PRINTABLE_RADIUS
|
|
||||||
#define X_MIN_POS -DELTA_PRINTABLE_RADIUS
|
#define X_MIN_POS -DELTA_PRINTABLE_RADIUS
|
||||||
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS
|
|
||||||
#define Y_MIN_POS -DELTA_PRINTABLE_RADIUS
|
#define Y_MIN_POS -DELTA_PRINTABLE_RADIUS
|
||||||
#define Z_MAX_POS MANUAL_Z_HOME_POS
|
|
||||||
#define Z_MIN_POS 0
|
#define Z_MIN_POS 0
|
||||||
|
#define X_MAX_POS DELTA_PRINTABLE_RADIUS
|
||||||
|
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS
|
||||||
|
#define Z_MAX_POS MANUAL_Z_HOME_POS
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Filament Runout Sensor ======================
|
//============================= Filament Runout Sensor ======================
|
||||||
|
@ -430,31 +429,59 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
#define ENABLE_AUTO_BED_LEVELING // Delete the comment to enable (remove // at the start of the line)
|
#define ENABLE_AUTO_BED_LEVELING // Delete the comment to enable (remove // at the start of the line)
|
||||||
// Z-Probe Repeatability test is not supported in Deltas yet.
|
// #define Z_PROBE_REPEATABILITY_TEST // Z-Probe Repeatability test is not supported in Deltas yet.
|
||||||
|
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
|
|
||||||
// Deltas only support grid mode
|
// There are 2 different ways to specify probing locations
|
||||||
#define AUTO_BED_LEVELING_GRID
|
//
|
||||||
|
// - "grid" mode
|
||||||
|
// Probe several points in a rectangular grid.
|
||||||
|
// You specify the rectangle and the density of sample points.
|
||||||
|
// This mode is preferred because there are more measurements.
|
||||||
|
//
|
||||||
|
// - "3-point" mode
|
||||||
|
// Probe 3 arbitrary points on the bed (that aren't colinear)
|
||||||
|
// You specify the XY coordinates of all 3 points.
|
||||||
|
|
||||||
#define DELTA_PROBABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
|
// Enable this to sample the bed in a grid (least squares solution)
|
||||||
#define LEFT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
|
// Note: this feature generates 10KB extra code size
|
||||||
#define RIGHT_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
|
#define AUTO_BED_LEVELING_GRID // Deltas only support grid mode
|
||||||
#define BACK_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
|
|
||||||
#define FRONT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
|
|
||||||
|
|
||||||
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
#ifdef AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
// Non-linear bed leveling will be used.
|
#define DELTA_PROBABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 10)
|
||||||
// Compensate by interpolating between the nearest four Z probe values for each point.
|
|
||||||
// Useful for deltas where the print surface may appear like a bowl or dome shape.
|
#define LEFT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
|
||||||
// Works best with ACCURATE_BED_LEVELING_POINTS 5 or higher.
|
#define RIGHT_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
|
||||||
#define AUTO_BED_LEVELING_GRID_POINTS 9
|
#define FRONT_PROBE_BED_POSITION -DELTA_PROBABLE_RADIUS
|
||||||
|
#define BACK_PROBE_BED_POSITION DELTA_PROBABLE_RADIUS
|
||||||
|
|
||||||
|
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
||||||
|
|
||||||
|
// Non-linear bed leveling will be used.
|
||||||
|
// Compensate by interpolating between the nearest four Z probe values for each point.
|
||||||
|
// Useful for deltas where the print surface may appear like a bowl or dome shape.
|
||||||
|
// Works best with ACCURATE_BED_LEVELING_POINTS 5 or higher.
|
||||||
|
#define AUTO_BED_LEVELING_GRID_POINTS 9
|
||||||
|
|
||||||
|
#else // !AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
|
// Arbitrary points to probe. A simple cross-product
|
||||||
|
// is used to estimate the plane of the bed.
|
||||||
|
#define ABL_PROBE_PT_1_X 15
|
||||||
|
#define ABL_PROBE_PT_1_Y 180
|
||||||
|
#define ABL_PROBE_PT_2_X 15
|
||||||
|
#define ABL_PROBE_PT_2_Y 20
|
||||||
|
#define ABL_PROBE_PT_3_X 170
|
||||||
|
#define ABL_PROBE_PT_3_Y 20
|
||||||
|
|
||||||
|
#endif // AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
||||||
// X and Y offsets must be integers
|
// X and Y offsets must be integers
|
||||||
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // -left +right
|
#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // Probe on: -left +right
|
||||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // -front +behind
|
#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Probe on: -front +behind
|
||||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // -below (always!)
|
#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // -below (always!)
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_HOMING 15 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
#define Z_RAISE_BEFORE_HOMING 15 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
||||||
|
@ -465,7 +492,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
||||||
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
||||||
#define Z_RAISE_AFTER_PROBING 50 //How much the extruder will be raised after the last probing point.
|
#define Z_RAISE_AFTER_PROBING 50 //How much the extruder will be raised after the last probing point.
|
||||||
|
|
||||||
|
// #define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" //These commands will be executed in the end of G29 routine.
|
||||||
|
//Useful to retract a deployable probe.
|
||||||
|
|
||||||
|
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
||||||
|
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
//If defined, the Probe servo will be turned on only during movement and then turned off to avoid jerk
|
||||||
|
//The value is the delay to turn the servo off after powered on - depends on the servo speed; 300ms is good value, but you can try lower it.
|
||||||
|
// You MUST HAVE the SERVO_ENDSTOPS defined to use here a value higher than zero otherwise your code will not compile.
|
||||||
|
|
||||||
// Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
// Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
|
||||||
// Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
|
// Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
|
||||||
#define Z_PROBE_ALLEN_KEY
|
#define Z_PROBE_ALLEN_KEY
|
||||||
|
@ -507,16 +544,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
#endif // ENABLE_AUTO_BED_LEVELING
|
#endif // ENABLE_AUTO_BED_LEVELING
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
// The position of the homing switches
|
// The position of the homing switches
|
||||||
#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
||||||
#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
||||||
|
|
||||||
//Manual homing switch locations:
|
// Manual homing switch locations:
|
||||||
// For deltabots this means top and center of the Cartesian print volume.
|
// For deltabots this means top and center of the Cartesian print volume.
|
||||||
#define MANUAL_X_HOME_POS 0
|
#ifdef MANUAL_HOME_POSITIONS
|
||||||
#define MANUAL_Y_HOME_POS 0
|
#define MANUAL_X_HOME_POS 0
|
||||||
#define MANUAL_Z_HOME_POS 250 // For delta: Distance between nozzle and print surface after homing.
|
#define MANUAL_Y_HOME_POS 0
|
||||||
|
#define MANUAL_Z_HOME_POS 250 // For delta: Distance between nozzle and print surface after homing.
|
||||||
|
#endif
|
||||||
|
|
||||||
//// MOVEMENT SETTINGS
|
//// MOVEMENT SETTINGS
|
||||||
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
||||||
|
@ -555,8 +593,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
#ifdef CUSTOM_M_CODES
|
#ifdef CUSTOM_M_CODES
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
||||||
#define Z_PROBE_OFFSET_RANGE_MIN -15
|
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||||
#define Z_PROBE_OFFSET_RANGE_MAX -5
|
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -588,7 +626,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
// See also language.h
|
// See also language.h
|
||||||
#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
||||||
|
|
||||||
// Chose ONE of the next three charsets. This has to match your hardware. In case of a full graphic display this information is not important.
|
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
||||||
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
||||||
// See also documentation/LCDLanguageFont.md
|
// See also documentation/LCDLanguageFont.md
|
||||||
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||||
|
@ -606,6 +644,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||||
|
// 0 to disable buzzer feedback
|
||||||
|
|
||||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||||
// http://reprap.org/wiki/PanelOne
|
// http://reprap.org/wiki/PanelOne
|
||||||
|
@ -667,7 +706,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
// Shift register panels
|
// Shift register panels
|
||||||
// ---------------------
|
// ---------------------
|
||||||
// 2 wire Non-latching LCD SR from:
|
// 2 wire Non-latching LCD SR from:
|
||||||
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
||||||
|
|
||||||
//#define SAV_3DLCD
|
//#define SAV_3DLCD
|
||||||
|
|
||||||
|
@ -675,7 +714,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
//#define FAST_PWM_FAN
|
//#define FAST_PWM_FAN
|
||||||
|
|
||||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||||
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
|
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||||
//#define FAN_SOFT_PWM
|
//#define FAN_SOFT_PWM
|
||||||
|
|
||||||
|
@ -729,9 +768,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
* Support for a filament diameter sensor
|
* Support for a filament diameter sensor
|
||||||
* Also allows adjustment of diameter at print time (vs at slicing)
|
* Also allows adjustment of diameter at print time (vs at slicing)
|
||||||
* Single extruder only at this point (extruder 0)
|
* Single extruder only at this point (extruder 0)
|
||||||
*
|
*
|
||||||
* Motherboards
|
* Motherboards
|
||||||
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
||||||
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
||||||
* 301 - Rambo - uses Analog input 3
|
* 301 - Rambo - uses Analog input 3
|
||||||
* Note may require analog pins to be defined for different motherboards
|
* Note may require analog pins to be defined for different motherboards
|
||||||
|
@ -748,7 +787,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||||
#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM)
|
#define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM)
|
||||||
|
|
||||||
//defines used in the code
|
//defines used in the code
|
||||||
#define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially
|
#define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially
|
||||||
|
|
||||||
//When using an LCD, uncomment the line below to display the Filament sensor data on the last line instead of status. Status will appear for 5 sec.
|
//When using an LCD, uncomment the line below to display the Filament sensor data on the last line instead of status. Status will appear for 5 sec.
|
||||||
//#define FILAMENT_LCD_DISPLAY
|
//#define FILAMENT_LCD_DISPLAY
|
||||||
|
|
|
@ -13,30 +13,30 @@
|
||||||
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
|
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
|
||||||
|
|
||||||
//// Heating sanity check:
|
//// Heating sanity check:
|
||||||
// This waits for the watchperiod in milliseconds whenever an M104 or M109 increases the target temperature
|
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature
|
||||||
// If the temperature has not increased at the end of that period, the target temperature is set to zero.
|
// If the temperature has not increased at the end of that period, the target temperature is set to zero.
|
||||||
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and the current temperature
|
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and the current temperature
|
||||||
// differ by at least 2x WATCH_TEMP_INCREASE
|
// differ by at least 2x WATCH_TEMP_INCREASE
|
||||||
//#define WATCH_TEMP_PERIOD 40000 //40 seconds
|
//#define WATCH_TEMP_PERIOD 40000 //40 seconds
|
||||||
//#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds
|
//#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds
|
||||||
|
|
||||||
#ifdef PIDTEMP
|
#ifdef PIDTEMP
|
||||||
// this adds an experimental additional term to the heatingpower, proportional to the extrusion speed.
|
// this adds an experimental additional term to the heating power, proportional to the extrusion speed.
|
||||||
// if Kc is choosen well, the additional required power due to increased melting should be compensated.
|
// if Kc is chosen well, the additional required power due to increased melting should be compensated.
|
||||||
#define PID_ADD_EXTRUSION_RATE
|
#define PID_ADD_EXTRUSION_RATE
|
||||||
#ifdef PID_ADD_EXTRUSION_RATE
|
#ifdef PID_ADD_EXTRUSION_RATE
|
||||||
#define DEFAULT_Kc (1) //heatingpower=Kc*(e_speed)
|
#define DEFAULT_Kc (1) //heating power=Kc*(e_speed)
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
|
||||||
//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode.
|
//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode.
|
||||||
//The maximum buffered steps/sec of the extruder motor are called "se".
|
//The maximum buffered steps/sec of the extruder motor are called "se".
|
||||||
//You enter the autotemp mode by a M109 S<mintemp> T<maxtemp> F<factor>
|
//You enter the autotemp mode by a M109 S<mintemp> B<maxtemp> F<factor>
|
||||||
// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp
|
// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp
|
||||||
// you exit the value by any M109 without F*
|
// you exit the value by any M109 without F*
|
||||||
// Also, if the temperature is set to a value <mintemp, it is not changed by autotemp.
|
// Also, if the temperature is set to a value <mintemp, it is not changed by autotemp.
|
||||||
// on an ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
|
// on an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
|
||||||
#define AUTOTEMP
|
#define AUTOTEMP
|
||||||
#ifdef AUTOTEMP
|
#ifdef AUTOTEMP
|
||||||
#define AUTOTEMP_OLDWEIGHT 0.98
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
|
@ -46,10 +46,10 @@
|
||||||
//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
|
//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
|
||||||
//#define SHOW_TEMP_ADC_VALUES
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
|
|
||||||
// extruder run-out prevention.
|
// extruder run-out prevention.
|
||||||
//if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
|
//if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
|
||||||
//#define EXTRUDER_RUNOUT_PREVENT
|
//#define EXTRUDER_RUNOUT_PREVENT
|
||||||
#define EXTRUDER_RUNOUT_MINTEMP 190
|
#define EXTRUDER_RUNOUT_MINTEMP 190
|
||||||
#define EXTRUDER_RUNOUT_SECONDS 30.
|
#define EXTRUDER_RUNOUT_SECONDS 30.
|
||||||
#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
|
#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
|
||||||
#define EXTRUDER_RUNOUT_SPEED 1500. //extrusion speed
|
#define EXTRUDER_RUNOUT_SPEED 1500. //extrusion speed
|
||||||
|
@ -75,12 +75,12 @@
|
||||||
// Extruder cooling fans
|
// Extruder cooling fans
|
||||||
// Configure fan pin outputs to automatically turn on/off when the associated
|
// Configure fan pin outputs to automatically turn on/off when the associated
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
// Multiple extruders can be assigned to the same pin in which case
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
// the fan will turn on when any selected extruder is above the threshold.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
@ -100,68 +100,89 @@
|
||||||
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
||||||
//#define Z_DUAL_STEPPER_DRIVERS
|
//#define Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
// Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper.
|
||||||
|
// That way the machine is capable to align the bed during home, since both Z steppers are homed.
|
||||||
|
// There is also an implementation of M666 (software endstops adjustment) to this feature.
|
||||||
|
// After Z homing, this adjustment is applied to just one of the steppers in order to align the bed.
|
||||||
|
// One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2.
|
||||||
|
// If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive.
|
||||||
|
// Play a little bit with small adjustments (0.5mm) and check the behaviour.
|
||||||
|
// The M119 (endstops report) will start reporting the Z2 Endstop as well.
|
||||||
|
|
||||||
|
#define Z_DUAL_ENDSTOPS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_ENDSTOPS
|
||||||
|
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
|
||||||
|
#define Z2_DIR_PIN E2_DIR_PIN
|
||||||
|
#define Z2_ENABLE_PIN E2_ENABLE_PIN
|
||||||
|
#define Z2_MAX_PIN 36 //Endstop used for Z2 axis. In this case I'm using XMAX in a Rumba Board (pin 36)
|
||||||
|
const bool Z2_MAX_ENDSTOP_INVERTING = false;
|
||||||
|
#define DISABLE_XMAX_ENDSTOP //Better to disable the XMAX to avoid conflict. Just rename "XMAX_ENDSTOP" by the endstop you are using for Z2 axis.
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
// Same again but for Y Axis.
|
// Same again but for Y Axis.
|
||||||
//#define Y_DUAL_STEPPER_DRIVERS
|
//#define Y_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
// Define if the two Y drives need to rotate in opposite directions
|
// Define if the two Y drives need to rotate in opposite directions
|
||||||
#define INVERT_Y2_VS_Y_DIR true
|
#define INVERT_Y2_VS_Y_DIR true
|
||||||
|
|
||||||
// Enable this for dual x-carriage printers.
|
// Enable this for dual x-carriage printers.
|
||||||
// A dual x-carriage design has the advantage that the inactive extruder can be parked which
|
// A dual x-carriage design has the advantage that the inactive extruder can be parked which
|
||||||
// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage
|
// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage
|
||||||
// allowing faster printing speeds.
|
// allowing faster printing speeds.
|
||||||
//#define DUAL_X_CARRIAGE
|
//#define DUAL_X_CARRIAGE
|
||||||
#ifdef DUAL_X_CARRIAGE
|
#ifdef DUAL_X_CARRIAGE
|
||||||
// Configuration for second X-carriage
|
// Configuration for second X-carriage
|
||||||
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
||||||
// the second x-carriage always homes to the maximum endstop.
|
// the second x-carriage always homes to the maximum endstop.
|
||||||
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||||
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
||||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||||
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
||||||
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
||||||
// without modifying the firmware (through the "M218 T1 X???" command).
|
// without modifying the firmware (through the "M218 T1 X???" command).
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
||||||
#define X2_ENABLE_PIN 29
|
#define X2_ENABLE_PIN 29
|
||||||
#define X2_STEP_PIN 25
|
#define X2_STEP_PIN 25
|
||||||
#define X2_DIR_PIN 23
|
#define X2_DIR_PIN 23
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
||||||
|
|
||||||
// Default settings in "Auto-park Mode"
|
// Default settings in "Auto-park Mode"
|
||||||
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
||||||
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
||||||
|
|
||||||
// Default x offset in duplication mode (typically set to half print bed width)
|
// Default x offset in duplication mode (typically set to half print bed width)
|
||||||
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
||||||
|
|
||||||
#endif //DUAL_X_CARRIAGE
|
#endif //DUAL_X_CARRIAGE
|
||||||
|
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
||||||
#define X_HOME_RETRACT_MM 5
|
#define X_HOME_RETRACT_MM 5
|
||||||
#define Y_HOME_RETRACT_MM 5
|
#define Y_HOME_RETRACT_MM 5
|
||||||
#define Z_HOME_RETRACT_MM 5 // deltas need the same for all three axis
|
#define Z_HOME_RETRACT_MM 5 // deltas need the same for all three axis
|
||||||
#define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
#define HOMING_BUMP_DIVISOR {10, 10, 20} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||||
|
|
||||||
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
||||||
|
|
||||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||||
|
|
||||||
#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step)
|
|
||||||
|
|
||||||
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
||||||
#define INVERT_X_STEP_PIN false
|
#define INVERT_X_STEP_PIN false
|
||||||
#define INVERT_Y_STEP_PIN false
|
#define INVERT_Y_STEP_PIN false
|
||||||
|
@ -174,9 +195,9 @@
|
||||||
#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
|
#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
|
||||||
#define DEFAULT_MINTRAVELFEEDRATE 0.0
|
#define DEFAULT_MINTRAVELFEEDRATE 0.0
|
||||||
|
|
||||||
// Feedrates for manual moves along X, Y, Z, E from panel
|
|
||||||
#ifdef ULTIPANEL
|
#ifdef ULTIPANEL
|
||||||
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
|
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
|
||||||
|
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// minimum time in microseconds that a movement needs to take if the buffer is emptied.
|
// minimum time in microseconds that a movement needs to take if the buffer is emptied.
|
||||||
|
@ -213,36 +234,46 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
||||||
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
|
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
|
||||||
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
|
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
|
||||||
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
||||||
|
|
||||||
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
||||||
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
||||||
|
|
||||||
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
#ifdef SDSUPPORT
|
||||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
|
||||||
|
|
||||||
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the filesystem block order.
|
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
||||||
// if a file is deleted, it frees a block. hence, the order is not purely cronological. To still have auto0.g accessible, there is again the option to do that.
|
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
||||||
// using:
|
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
||||||
//#define MENU_ADDAUTOSTART
|
// be commented out otherwise
|
||||||
|
#define SDCARDDETECTINVERTED
|
||||||
|
|
||||||
// Show a progress bar on the LCD when printing from SD
|
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||||
//#define LCD_PROGRESS_BAR
|
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
||||||
|
|
||||||
#ifdef LCD_PROGRESS_BAR
|
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
||||||
// Amount of time (ms) to show the bar
|
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
||||||
#define PROGRESS_BAR_BAR_TIME 2000
|
// using:
|
||||||
// Amount of time (ms) to show the status message
|
//#define MENU_ADDAUTOSTART
|
||||||
#define PROGRESS_BAR_MSG_TIME 2000
|
|
||||||
// Amount of time (ms) to retain the status message (0=forever)
|
|
||||||
#define PROGRESS_MSG_EXPIRE 0
|
|
||||||
// Enable this to show messages for MSG_TIME then hide them
|
|
||||||
//#define PROGRESS_MSG_ONCE
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// The hardware watchdog should reset the Microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
// Show a progress bar on HD44780 LCDs for SD printing
|
||||||
|
//#define LCD_PROGRESS_BAR
|
||||||
|
|
||||||
|
#ifdef LCD_PROGRESS_BAR
|
||||||
|
// Amount of time (ms) to show the bar
|
||||||
|
#define PROGRESS_BAR_BAR_TIME 2000
|
||||||
|
// Amount of time (ms) to show the status message
|
||||||
|
#define PROGRESS_BAR_MSG_TIME 3000
|
||||||
|
// Amount of time (ms) to retain the status message (0=forever)
|
||||||
|
#define PROGRESS_MSG_EXPIRE 0
|
||||||
|
// Enable this to show messages for MSG_TIME then hide them
|
||||||
|
//#define PROGRESS_MSG_ONCE
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
|
|
||||||
|
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||||
//#define USE_WATCHDOG
|
//#define USE_WATCHDOG
|
||||||
|
|
||||||
#ifdef USE_WATCHDOG
|
#ifdef USE_WATCHDOG
|
||||||
|
@ -256,7 +287,7 @@
|
||||||
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
|
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
|
||||||
|
|
||||||
// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
|
// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
|
||||||
// it can e.g. be used to change z-positions in the print startup phase in realtime
|
// it can e.g. be used to change z-positions in the print startup phase in real-time
|
||||||
// does not respect endstops!
|
// does not respect endstops!
|
||||||
//#define BABYSTEPPING
|
//#define BABYSTEPPING
|
||||||
#ifdef BABYSTEPPING
|
#ifdef BABYSTEPPING
|
||||||
|
@ -269,7 +300,7 @@
|
||||||
//
|
//
|
||||||
// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K * cubic mm per second ^ 2
|
// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K * cubic mm per second ^ 2
|
||||||
//
|
//
|
||||||
// hooke's law says: force = k * distance
|
// Hooke's law says: force = k * distance
|
||||||
// Bernoulli's principle says: v ^ 2 / 2 + g . h + pressure / density = constant
|
// Bernoulli's principle says: v ^ 2 / 2 + g . h + pressure / density = constant
|
||||||
// so: v ^ 2 is proportional to number of steps we advance the extruder
|
// so: v ^ 2 is proportional to number of steps we advance the extruder
|
||||||
//#define ADVANCE
|
//#define ADVANCE
|
||||||
|
@ -278,7 +309,7 @@
|
||||||
#define EXTRUDER_ADVANCE_K .0
|
#define EXTRUDER_ADVANCE_K .0
|
||||||
#define D_FILAMENT 2.85
|
#define D_FILAMENT 2.85
|
||||||
#define STEPS_MM_E 836
|
#define STEPS_MM_E 836
|
||||||
#endif // ADVANCE
|
#endif
|
||||||
|
|
||||||
// Arc interpretation settings:
|
// Arc interpretation settings:
|
||||||
#define MM_PER_ARC_SEGMENT 1
|
#define MM_PER_ARC_SEGMENT 1
|
||||||
|
@ -286,12 +317,6 @@
|
||||||
|
|
||||||
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
||||||
|
|
||||||
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
|
||||||
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
|
||||||
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
|
||||||
// be commented out otherwise
|
|
||||||
#define SDCARDDETECTINVERTED
|
|
||||||
|
|
||||||
// Control heater 0 and heater 1 in parallel.
|
// Control heater 0 and heater 1 in parallel.
|
||||||
//#define HEATERS_PARALLEL
|
//#define HEATERS_PARALLEL
|
||||||
|
|
||||||
|
@ -299,24 +324,24 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
//=============================Buffers ============================
|
//=============================Buffers ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
// The number of linear motions that can be in the plan at any give time.
|
// The number of linear motions that can be in the plan at any give time.
|
||||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ringbuffering.
|
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
||||||
#if defined SDSUPPORT
|
#ifdef SDSUPPORT
|
||||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||||
#else
|
#else
|
||||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
|
||||||
//The ASCII buffer for recieving from the serial:
|
//The ASCII buffer for receiving from the serial:
|
||||||
#define MAX_CMD_SIZE 96
|
#define MAX_CMD_SIZE 96
|
||||||
#define BUFSIZE 4
|
#define BUFSIZE 4
|
||||||
|
|
||||||
|
|
||||||
// Firmware based and LCD controled retract
|
// Firmware based and LCD controlled retract
|
||||||
// M207 and M208 can be used to define parameters for the retraction.
|
// M207 and M208 can be used to define parameters for the retraction.
|
||||||
// The retraction can be called by the slicer using G10 and G11
|
// The retraction can be called by the slicer using G10 and G11
|
||||||
// until then, intended retractions can be detected by moves that only extrude and the direction.
|
// until then, intended retractions can be detected by moves that only extrude and the direction.
|
||||||
// the moves are than replaced by the firmware controlled ones.
|
// the moves are than replaced by the firmware controlled ones.
|
||||||
|
|
||||||
// #define FWRETRACT //ONLY PARTIALLY TESTED
|
// #define FWRETRACT //ONLY PARTIALLY TESTED
|
||||||
|
@ -343,6 +368,139 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have TMC26X motor drivers.
|
||||||
|
* you need to import the TMC26XStepper library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_TMCDRIVER
|
||||||
|
#ifdef HAVE_TMCDRIVER
|
||||||
|
|
||||||
|
// #define X_IS_TMC
|
||||||
|
#define X_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define X2_IS_TMC
|
||||||
|
#define X2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y_IS_TMC
|
||||||
|
#define Y_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y2_IS_TMC
|
||||||
|
#define Y2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z_IS_TMC
|
||||||
|
#define Z_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z2_IS_TMC
|
||||||
|
#define Z2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E0_IS_TMC
|
||||||
|
#define E0_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E0_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E1_IS_TMC
|
||||||
|
#define E1_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E1_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E2_IS_TMC
|
||||||
|
#define E2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E3_IS_TMC
|
||||||
|
#define E3_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E3_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have L6470 motor drivers.
|
||||||
|
* you need to import the L6470 library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_L6470DRIVER
|
||||||
|
#ifdef HAVE_L6470DRIVER
|
||||||
|
|
||||||
|
// #define X_IS_L6470
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define X2_IS_L6470
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y_IS_L6470
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y2_IS_L6470
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z_IS_L6470
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z2_IS_L6470
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E0_IS_L6470
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E1_IS_L6470
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E2_IS_L6470
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E3_IS_L6470
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
#include "Conditionals.h"
|
#include "Conditionals.h"
|
||||||
#include "SanityCheck.h"
|
#include "SanityCheck.h"
|
||||||
|
|
||||||
|
|
|
@ -104,7 +104,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
//
|
||||||
|
@ -118,7 +118,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
// 1010 is Pt1000 with 1k pullup (non standard)
|
||||||
// 147 is Pt100 with 4k7 pullup
|
// 147 is Pt100 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
// 110 is Pt100 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
// Use it for Testing or Development purposes. NEVER for production machine.
|
||||||
// #define DUMMY_THERMISTOR_998_VALUE 25
|
// #define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
// #define DUMMY_THERMISTOR_999_VALUE 100
|
// #define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
@ -267,15 +267,15 @@ The issue: If a thermistor come off, it will read a lower temperature than actua
|
||||||
The system will turn the heater on forever, burning up the filament and anything
|
The system will turn the heater on forever, burning up the filament and anything
|
||||||
else around.
|
else around.
|
||||||
|
|
||||||
After the temperature reaches the target for the first time, this feature will
|
After the temperature reaches the target for the first time, this feature will
|
||||||
start measuring for how long the current temperature stays below the target
|
start measuring for how long the current temperature stays below the target
|
||||||
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
||||||
|
|
||||||
If it stays longer than _PERIOD, it means the thermistor temperature
|
If it stays longer than _PERIOD, it means the thermistor temperature
|
||||||
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
||||||
safe side, the system will he halt.
|
safe side, the system will he halt.
|
||||||
|
|
||||||
Bear in mind the count down will just start AFTER the first time the
|
Bear in mind the count down will just start AFTER the first time the
|
||||||
thermistor temperature is over the target, so you will have no problem if
|
thermistor temperature is over the target, so you will have no problem if
|
||||||
your extruder heater takes 2 minutes to hit the target on heating.
|
your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
|
|
||||||
|
@ -318,7 +318,7 @@ your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
// #define ENDSTOPPULLUP_ZMIN
|
// #define ENDSTOPPULLUP_ZMIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||||
|
@ -341,13 +341,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define DISABLE_E false // For all extruders
|
#define DISABLE_E false // For all extruders
|
||||||
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
||||||
|
|
||||||
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||||
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
|
#define INVERT_X_DIR false
|
||||||
#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true
|
#define INVERT_Y_DIR false
|
||||||
#define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_Z_DIR false
|
||||||
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E0_DIR true
|
||||||
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E1_DIR false
|
||||||
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E2_DIR false
|
||||||
|
#define INVERT_E3_DIR false
|
||||||
|
|
||||||
// ENDSTOP SETTINGS:
|
// ENDSTOP SETTINGS:
|
||||||
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
||||||
|
@ -359,12 +360,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
||||||
|
|
||||||
// Travel limits after homing (units are in mm)
|
// Travel limits after homing (units are in mm)
|
||||||
#define X_MAX_POS 110
|
|
||||||
#define X_MIN_POS 0
|
#define X_MIN_POS 0
|
||||||
#define Y_MAX_POS 150
|
|
||||||
#define Y_MIN_POS 0
|
#define Y_MIN_POS 0
|
||||||
#define Z_MAX_POS 86
|
|
||||||
#define Z_MIN_POS 0
|
#define Z_MIN_POS 0
|
||||||
|
#define X_MAX_POS 110
|
||||||
|
#define Y_MAX_POS 150
|
||||||
|
#define Z_MAX_POS 86
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Filament Runout Sensor ======================
|
//============================= Filament Runout Sensor ======================
|
||||||
|
@ -424,13 +425,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define FRONT_PROBE_BED_POSITION 20
|
#define FRONT_PROBE_BED_POSITION 20
|
||||||
#define BACK_PROBE_BED_POSITION 170
|
#define BACK_PROBE_BED_POSITION 170
|
||||||
|
|
||||||
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
||||||
|
|
||||||
// Set the number of grid points per dimension
|
// Set the number of grid points per dimension
|
||||||
// You probably don't need more than 3 (squared=9)
|
// You probably don't need more than 3 (squared=9)
|
||||||
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
||||||
|
|
||||||
|
|
||||||
#else // !AUTO_BED_LEVELING_GRID
|
#else // !AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
// Arbitrary points to probe. A simple cross-product
|
// Arbitrary points to probe. A simple cross-product
|
||||||
|
@ -444,11 +444,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#endif // AUTO_BED_LEVELING_GRID
|
#endif // AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
|
|
||||||
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
||||||
// X and Y offsets must be integers
|
// X and Y offsets must be integers
|
||||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // -left +right
|
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Probe on: -left +right
|
||||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // -front +behind
|
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Probe on: -front +behind
|
||||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
||||||
|
@ -456,10 +455,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
||||||
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
||||||
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
||||||
|
|
||||||
|
// #define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" //These commands will be executed in the end of G29 routine.
|
||||||
|
//Useful to retract a deployable probe.
|
||||||
|
|
||||||
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
||||||
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
@ -494,12 +496,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
||||||
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
||||||
|
|
||||||
//Manual homing switch locations:
|
// Manual homing switch locations:
|
||||||
// For deltabots this means top and center of the Cartesian print volume.
|
// For deltabots this means top and center of the Cartesian print volume.
|
||||||
#define MANUAL_X_HOME_POS 0
|
#ifdef MANUAL_HOME_POSITIONS
|
||||||
#define MANUAL_Y_HOME_POS 0
|
#define MANUAL_X_HOME_POS 0
|
||||||
#define MANUAL_Z_HOME_POS 0
|
#define MANUAL_Y_HOME_POS 0
|
||||||
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
#define MANUAL_Z_HOME_POS 0
|
||||||
|
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
||||||
|
#endif
|
||||||
|
|
||||||
//// MOVEMENT SETTINGS
|
//// MOVEMENT SETTINGS
|
||||||
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
||||||
|
@ -536,8 +540,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#ifdef CUSTOM_M_CODES
|
#ifdef CUSTOM_M_CODES
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
||||||
#define Z_PROBE_OFFSET_RANGE_MIN -15
|
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||||
#define Z_PROBE_OFFSET_RANGE_MAX -5
|
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -565,13 +569,16 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//==============================LCD and SD support=============================
|
//==============================LCD and SD support=============================
|
||||||
|
|
||||||
// Define your display language below. Replace (en) with your language code and uncomment.
|
// Define your display language below. Replace (en) with your language code and uncomment.
|
||||||
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu
|
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu, kana, kana_utf8, test
|
||||||
// See also language.h
|
// See also language.h
|
||||||
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
||||||
|
|
||||||
// Character based displays can have different extended charsets.
|
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
||||||
#define DISPLAY_CHARSET_HD44780_JAPAN // "ääööüüß23°"
|
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
||||||
//#define DISPLAY_CHARSET_HD44780_WESTERN // "ÄäÖöÜüß²³°" if you see a '~' instead of a 'arrow_right' at the right of submenuitems - this is the right one.
|
// See also documentation/LCDLanguageFont.md
|
||||||
|
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_WESTERN
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_CYRILLIC
|
||||||
|
|
||||||
//#define ULTRA_LCD //general LCD support, also 16x2
|
//#define ULTRA_LCD //general LCD support, also 16x2
|
||||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||||
|
@ -584,6 +591,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||||
|
// 0 to disable buzzer feedback
|
||||||
|
|
||||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||||
// http://reprap.org/wiki/PanelOne
|
// http://reprap.org/wiki/PanelOne
|
||||||
|
@ -638,7 +646,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
// Shift register panels
|
// Shift register panels
|
||||||
// ---------------------
|
// ---------------------
|
||||||
// 2 wire Non-latching LCD SR from:
|
// 2 wire Non-latching LCD SR from:
|
||||||
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
||||||
|
|
||||||
//#define SAV_3DLCD
|
//#define SAV_3DLCD
|
||||||
|
|
||||||
|
@ -646,7 +654,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define FAST_PWM_FAN
|
//#define FAST_PWM_FAN
|
||||||
|
|
||||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||||
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
|
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||||
//#define FAN_SOFT_PWM
|
//#define FAN_SOFT_PWM
|
||||||
|
|
||||||
|
@ -700,9 +708,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
* Support for a filament diameter sensor
|
* Support for a filament diameter sensor
|
||||||
* Also allows adjustment of diameter at print time (vs at slicing)
|
* Also allows adjustment of diameter at print time (vs at slicing)
|
||||||
* Single extruder only at this point (extruder 0)
|
* Single extruder only at this point (extruder 0)
|
||||||
*
|
*
|
||||||
* Motherboards
|
* Motherboards
|
||||||
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
||||||
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
||||||
* 301 - Rambo - uses Analog input 3
|
* 301 - Rambo - uses Analog input 3
|
||||||
* Note may require analog pins to be defined for different motherboards
|
* Note may require analog pins to be defined for different motherboards
|
||||||
|
|
|
@ -32,7 +32,7 @@
|
||||||
|
|
||||||
//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode.
|
//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode.
|
||||||
//The maximum buffered steps/sec of the extruder motor are called "se".
|
//The maximum buffered steps/sec of the extruder motor are called "se".
|
||||||
//You enter the autotemp mode by a M109 S<mintemp> T<maxtemp> F<factor>
|
//You enter the autotemp mode by a M109 S<mintemp> B<maxtemp> F<factor>
|
||||||
// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp
|
// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp
|
||||||
// you exit the value by any M109 without F*
|
// you exit the value by any M109 without F*
|
||||||
// Also, if the temperature is set to a value <mintemp, it is not changed by autotemp.
|
// Also, if the temperature is set to a value <mintemp, it is not changed by autotemp.
|
||||||
|
@ -77,10 +77,10 @@
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
// Multiple extruders can be assigned to the same pin in which case
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
// the fan will turn on when any selected extruder is above the threshold.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
@ -100,6 +100,30 @@
|
||||||
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
||||||
//#define Z_DUAL_STEPPER_DRIVERS
|
//#define Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
// Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper.
|
||||||
|
// That way the machine is capable to align the bed during home, since both Z steppers are homed.
|
||||||
|
// There is also an implementation of M666 (software endstops adjustment) to this feature.
|
||||||
|
// After Z homing, this adjustment is applied to just one of the steppers in order to align the bed.
|
||||||
|
// One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2.
|
||||||
|
// If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive.
|
||||||
|
// Play a little bit with small adjustments (0.5mm) and check the behaviour.
|
||||||
|
// The M119 (endstops report) will start reporting the Z2 Endstop as well.
|
||||||
|
|
||||||
|
#define Z_DUAL_ENDSTOPS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_ENDSTOPS
|
||||||
|
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
|
||||||
|
#define Z2_DIR_PIN E2_DIR_PIN
|
||||||
|
#define Z2_ENABLE_PIN E2_ENABLE_PIN
|
||||||
|
#define Z2_MAX_PIN 36 //Endstop used for Z2 axis. In this case I'm using XMAX in a Rumba Board (pin 36)
|
||||||
|
const bool Z2_MAX_ENDSTOP_INVERTING = false;
|
||||||
|
#define DISABLE_XMAX_ENDSTOP //Better to disable the XMAX to avoid conflict. Just rename "XMAX_ENDSTOP" by the endstop you are using for Z2 axis.
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
// Same again but for Y Axis.
|
// Same again but for Y Axis.
|
||||||
//#define Y_DUAL_STEPPER_DRIVERS
|
//#define Y_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
@ -112,41 +136,41 @@
|
||||||
// allowing faster printing speeds.
|
// allowing faster printing speeds.
|
||||||
//#define DUAL_X_CARRIAGE
|
//#define DUAL_X_CARRIAGE
|
||||||
#ifdef DUAL_X_CARRIAGE
|
#ifdef DUAL_X_CARRIAGE
|
||||||
// Configuration for second X-carriage
|
// Configuration for second X-carriage
|
||||||
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
||||||
// the second x-carriage always homes to the maximum endstop.
|
// the second x-carriage always homes to the maximum endstop.
|
||||||
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||||
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
||||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||||
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
||||||
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
||||||
// without modifying the firmware (through the "M218 T1 X???" command).
|
// without modifying the firmware (through the "M218 T1 X???" command).
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
||||||
#define X2_ENABLE_PIN 29
|
#define X2_ENABLE_PIN 29
|
||||||
#define X2_STEP_PIN 25
|
#define X2_STEP_PIN 25
|
||||||
#define X2_DIR_PIN 23
|
#define X2_DIR_PIN 23
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
||||||
|
|
||||||
// Default settings in "Auto-park Mode"
|
// Default settings in "Auto-park Mode"
|
||||||
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
||||||
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
||||||
|
|
||||||
// Default x offset in duplication mode (typically set to half print bed width)
|
// Default x offset in duplication mode (typically set to half print bed width)
|
||||||
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
||||||
|
|
||||||
#endif //DUAL_X_CARRIAGE
|
#endif //DUAL_X_CARRIAGE
|
||||||
|
|
||||||
|
@ -159,8 +183,6 @@
|
||||||
|
|
||||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||||
|
|
||||||
#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step)
|
|
||||||
|
|
||||||
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
||||||
#define INVERT_X_STEP_PIN false
|
#define INVERT_X_STEP_PIN false
|
||||||
#define INVERT_Y_STEP_PIN false
|
#define INVERT_Y_STEP_PIN false
|
||||||
|
@ -205,7 +227,6 @@
|
||||||
// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8
|
// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 4
|
#define DIGIPOT_I2C_NUM_CHANNELS 4
|
||||||
// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
//#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}
|
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.7, 1.7, 1.7, 1.7}
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.7, 1.7, 1.7, 1.7}
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
@ -213,34 +234,44 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
||||||
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
|
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
|
||||||
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
|
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
|
||||||
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
||||||
|
|
||||||
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
||||||
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
||||||
|
|
||||||
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
#ifdef SDSUPPORT
|
||||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
|
||||||
|
|
||||||
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
||||||
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
||||||
// using:
|
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
||||||
//#define MENU_ADDAUTOSTART
|
// be commented out otherwise
|
||||||
|
//#define SDCARDDETECTINVERTED
|
||||||
|
|
||||||
// Show a progress bar on the LCD when printing from SD
|
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||||
//#define LCD_PROGRESS_BAR
|
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
||||||
|
|
||||||
#ifdef LCD_PROGRESS_BAR
|
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
||||||
// Amount of time (ms) to show the bar
|
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
||||||
#define PROGRESS_BAR_BAR_TIME 2000
|
// using:
|
||||||
// Amount of time (ms) to show the status message
|
//#define MENU_ADDAUTOSTART
|
||||||
#define PROGRESS_BAR_MSG_TIME 2000
|
|
||||||
// Amount of time (ms) to retain the status message (0=forever)
|
// Show a progress bar on HD44780 LCDs for SD printing
|
||||||
#define PROGRESS_MSG_EXPIRE 0
|
//#define LCD_PROGRESS_BAR
|
||||||
// Enable this to show messages for MSG_TIME then hide them
|
|
||||||
//#define PROGRESS_MSG_ONCE
|
#ifdef LCD_PROGRESS_BAR
|
||||||
#endif
|
// Amount of time (ms) to show the bar
|
||||||
|
#define PROGRESS_BAR_BAR_TIME 2000
|
||||||
|
// Amount of time (ms) to show the status message
|
||||||
|
#define PROGRESS_BAR_MSG_TIME 3000
|
||||||
|
// Amount of time (ms) to retain the status message (0=forever)
|
||||||
|
#define PROGRESS_MSG_EXPIRE 0
|
||||||
|
// Enable this to show messages for MSG_TIME then hide them
|
||||||
|
//#define PROGRESS_MSG_ONCE
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
|
|
||||||
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||||
//#define USE_WATCHDOG
|
//#define USE_WATCHDOG
|
||||||
|
@ -278,7 +309,7 @@
|
||||||
#define EXTRUDER_ADVANCE_K .0
|
#define EXTRUDER_ADVANCE_K .0
|
||||||
#define D_FILAMENT 2.85
|
#define D_FILAMENT 2.85
|
||||||
#define STEPS_MM_E 836
|
#define STEPS_MM_E 836
|
||||||
#endif // ADVANCE
|
#endif
|
||||||
|
|
||||||
// Arc interpretation settings:
|
// Arc interpretation settings:
|
||||||
#define MM_PER_ARC_SEGMENT 1
|
#define MM_PER_ARC_SEGMENT 1
|
||||||
|
@ -286,12 +317,6 @@
|
||||||
|
|
||||||
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
||||||
|
|
||||||
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
|
||||||
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
|
||||||
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
|
||||||
// be commented out otherwise
|
|
||||||
//#define SDCARDDETECTINVERTED
|
|
||||||
|
|
||||||
// Control heater 0 and heater 1 in parallel.
|
// Control heater 0 and heater 1 in parallel.
|
||||||
//#define HEATERS_PARALLEL
|
//#define HEATERS_PARALLEL
|
||||||
|
|
||||||
|
@ -301,7 +326,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
|
|
||||||
// The number of linear motions that can be in the plan at any give time.
|
// The number of linear motions that can be in the plan at any give time.
|
||||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
||||||
#if defined SDSUPPORT
|
#ifdef SDSUPPORT
|
||||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||||
#else
|
#else
|
||||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||||
|
@ -323,9 +348,11 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#ifdef FWRETRACT
|
#ifdef FWRETRACT
|
||||||
#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
|
#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
|
||||||
#define RETRACT_LENGTH 3 //default retract length (positive mm)
|
#define RETRACT_LENGTH 3 //default retract length (positive mm)
|
||||||
|
#define RETRACT_LENGTH_SWAP 13 //default swap retract length (positive mm), for extruder change
|
||||||
#define RETRACT_FEEDRATE 45 //default feedrate for retracting (mm/s)
|
#define RETRACT_FEEDRATE 45 //default feedrate for retracting (mm/s)
|
||||||
#define RETRACT_ZLIFT 0 //default retract Z-lift
|
#define RETRACT_ZLIFT 0 //default retract Z-lift
|
||||||
#define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering)
|
#define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering)
|
||||||
|
#define RETRACT_RECOVER_LENGTH_SWAP 0 //default additional swap recover length (mm, added to retract length when recovering from extruder change)
|
||||||
#define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s)
|
#define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -341,6 +368,139 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have TMC26X motor drivers.
|
||||||
|
* you need to import the TMC26XStepper library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_TMCDRIVER
|
||||||
|
#ifdef HAVE_TMCDRIVER
|
||||||
|
|
||||||
|
// #define X_IS_TMC
|
||||||
|
#define X_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define X2_IS_TMC
|
||||||
|
#define X2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y_IS_TMC
|
||||||
|
#define Y_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y2_IS_TMC
|
||||||
|
#define Y2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z_IS_TMC
|
||||||
|
#define Z_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z2_IS_TMC
|
||||||
|
#define Z2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E0_IS_TMC
|
||||||
|
#define E0_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E0_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E1_IS_TMC
|
||||||
|
#define E1_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E1_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E2_IS_TMC
|
||||||
|
#define E2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E3_IS_TMC
|
||||||
|
#define E3_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E3_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have L6470 motor drivers.
|
||||||
|
* you need to import the L6470 library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_L6470DRIVER
|
||||||
|
#ifdef HAVE_L6470DRIVER
|
||||||
|
|
||||||
|
// #define X_IS_L6470
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define X2_IS_L6470
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y_IS_L6470
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y2_IS_L6470
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z_IS_L6470
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z2_IS_L6470
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E0_IS_L6470
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E1_IS_L6470
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E2_IS_L6470
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E3_IS_L6470
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
#include "Conditionals.h"
|
#include "Conditionals.h"
|
||||||
#include "SanityCheck.h"
|
#include "SanityCheck.h"
|
||||||
|
|
||||||
|
|
|
@ -104,7 +104,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
//
|
||||||
|
@ -118,7 +118,7 @@ Here are some standard links for getting your machine calibrated:
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
// 1010 is Pt1000 with 1k pullup (non standard)
|
||||||
// 147 is Pt100 with 4k7 pullup
|
// 147 is Pt100 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
// 110 is Pt100 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
// Use it for Testing or Development purposes. NEVER for production machine.
|
||||||
// #define DUMMY_THERMISTOR_998_VALUE 25
|
// #define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
// #define DUMMY_THERMISTOR_999_VALUE 100
|
// #define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
@ -193,8 +193,8 @@ Here are some standard links for getting your machine calibrated:
|
||||||
|
|
||||||
// Ultimaker
|
// Ultimaker
|
||||||
// #define DEFAULT_Kp 22.2
|
// #define DEFAULT_Kp 22.2
|
||||||
// #define DEFAULT_Ki 1.08
|
// #define DEFAULT_Ki 1.08
|
||||||
// #define DEFAULT_Kd 114
|
// #define DEFAULT_Kd 114
|
||||||
|
|
||||||
// MakerGear
|
// MakerGear
|
||||||
// #define DEFAULT_Kp 7.0
|
// #define DEFAULT_Kp 7.0
|
||||||
|
@ -269,15 +269,15 @@ The issue: If a thermistor come off, it will read a lower temperature than actua
|
||||||
The system will turn the heater on forever, burning up the filament and anything
|
The system will turn the heater on forever, burning up the filament and anything
|
||||||
else around.
|
else around.
|
||||||
|
|
||||||
After the temperature reaches the target for the first time, this feature will
|
After the temperature reaches the target for the first time, this feature will
|
||||||
start measuring for how long the current temperature stays below the target
|
start measuring for how long the current temperature stays below the target
|
||||||
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
|
||||||
|
|
||||||
If it stays longer than _PERIOD, it means the thermistor temperature
|
If it stays longer than _PERIOD, it means the thermistor temperature
|
||||||
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
cannot catch up with the target, so something *may be* wrong. Then, to be on the
|
||||||
safe side, the system will he halt.
|
safe side, the system will he halt.
|
||||||
|
|
||||||
Bear in mind the count down will just start AFTER the first time the
|
Bear in mind the count down will just start AFTER the first time the
|
||||||
thermistor temperature is over the target, so you will have no problem if
|
thermistor temperature is over the target, so you will have no problem if
|
||||||
your extruder heater takes 2 minutes to hit the target on heating.
|
your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
|
|
||||||
|
@ -320,7 +320,7 @@ your extruder heater takes 2 minutes to hit the target on heating.
|
||||||
// #define ENDSTOPPULLUP_ZMIN
|
// #define ENDSTOPPULLUP_ZMIN
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||||
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
|
||||||
|
@ -343,13 +343,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define DISABLE_E false // For all extruders
|
#define DISABLE_E false // For all extruders
|
||||||
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
|
||||||
|
|
||||||
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
|
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||||
#define INVERT_Y_DIR true // for Mendel set to true, for Orca set to false
|
#define INVERT_X_DIR false
|
||||||
#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true
|
#define INVERT_Y_DIR false
|
||||||
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_Z_DIR true
|
||||||
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E0_DIR false
|
||||||
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E1_DIR false
|
||||||
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E2_DIR false
|
||||||
|
#define INVERT_E3_DIR false
|
||||||
|
|
||||||
// ENDSTOP SETTINGS:
|
// ENDSTOP SETTINGS:
|
||||||
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
||||||
|
@ -361,12 +362,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
|
||||||
|
|
||||||
// Travel limits after homing (units are in mm)
|
// Travel limits after homing (units are in mm)
|
||||||
#define X_MAX_POS 205
|
|
||||||
#define X_MIN_POS 0
|
#define X_MIN_POS 0
|
||||||
#define Y_MAX_POS 205
|
|
||||||
#define Y_MIN_POS 0
|
#define Y_MIN_POS 0
|
||||||
#define Z_MAX_POS 120
|
|
||||||
#define Z_MIN_POS 0
|
#define Z_MIN_POS 0
|
||||||
|
#define X_MAX_POS 205
|
||||||
|
#define Y_MAX_POS 205
|
||||||
|
#define Z_MAX_POS 120
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Filament Runout Sensor ======================
|
//============================= Filament Runout Sensor ======================
|
||||||
|
@ -425,14 +426,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define RIGHT_PROBE_BED_POSITION 170
|
#define RIGHT_PROBE_BED_POSITION 170
|
||||||
#define FRONT_PROBE_BED_POSITION 20
|
#define FRONT_PROBE_BED_POSITION 20
|
||||||
#define BACK_PROBE_BED_POSITION 170
|
#define BACK_PROBE_BED_POSITION 170
|
||||||
|
|
||||||
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
#define MIN_PROBE_EDGE 10 // The probe square sides can be no smaller than this
|
||||||
|
|
||||||
// Set the number of grid points per dimension
|
// Set the number of grid points per dimension
|
||||||
// You probably don't need more than 3 (squared=9)
|
// You probably don't need more than 3 (squared=9)
|
||||||
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
#define AUTO_BED_LEVELING_GRID_POINTS 2
|
||||||
|
|
||||||
|
|
||||||
#else // !AUTO_BED_LEVELING_GRID
|
#else // !AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
// Arbitrary points to probe. A simple cross-product
|
// Arbitrary points to probe. A simple cross-product
|
||||||
|
@ -446,11 +446,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#endif // AUTO_BED_LEVELING_GRID
|
#endif // AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
|
|
||||||
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
// Offsets to the probe relative to the extruder tip (Hotend - Probe)
|
||||||
// X and Y offsets must be integers
|
// X and Y offsets must be integers
|
||||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // -left +right
|
#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // Probe on: -left +right
|
||||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // -front +behind
|
#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Probe on: -front +behind
|
||||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // -below (always!)
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
#define Z_RAISE_BEFORE_HOMING 4 // (in mm) Raise Z before homing (G28) for Probe Clearance.
|
||||||
|
@ -458,10 +457,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
|
|
||||||
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
#define XY_TRAVEL_SPEED 8000 // X and Y axis travel speed between probes, in mm/min
|
||||||
|
|
||||||
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
#define Z_RAISE_BEFORE_PROBING 15 //How much the extruder will be raised before traveling to the first probing point.
|
||||||
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
#define Z_RAISE_BETWEEN_PROBINGS 5 //How much the extruder will be raised when traveling from between next probing points
|
||||||
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
#define Z_RAISE_AFTER_PROBING 15 //How much the extruder will be raised after the last probing point.
|
||||||
|
|
||||||
|
// #define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" //These commands will be executed in the end of G29 routine.
|
||||||
|
//Useful to retract a deployable probe.
|
||||||
|
|
||||||
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
//#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
|
||||||
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
//#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
|
||||||
|
|
||||||
|
@ -496,12 +498,14 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
|
||||||
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
|
||||||
|
|
||||||
//Manual homing switch locations:
|
// Manual homing switch locations:
|
||||||
// For deltabots this means top and center of the Cartesian print volume.
|
// For deltabots this means top and center of the Cartesian print volume.
|
||||||
#define MANUAL_X_HOME_POS 0
|
#ifdef MANUAL_HOME_POSITIONS
|
||||||
#define MANUAL_Y_HOME_POS 0
|
#define MANUAL_X_HOME_POS 0
|
||||||
#define MANUAL_Z_HOME_POS 0
|
#define MANUAL_Y_HOME_POS 0
|
||||||
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
#define MANUAL_Z_HOME_POS 0
|
||||||
|
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
|
||||||
|
#endif
|
||||||
|
|
||||||
//// MOVEMENT SETTINGS
|
//// MOVEMENT SETTINGS
|
||||||
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
||||||
|
@ -521,7 +525,6 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration in mm/s^2 for retracts
|
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration in mm/s^2 for retracts
|
||||||
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
|
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
|
||||||
|
|
||||||
|
|
||||||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||||
|
@ -543,8 +546,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
#ifdef CUSTOM_M_CODES
|
#ifdef CUSTOM_M_CODES
|
||||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||||
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
#define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
|
||||||
#define Z_PROBE_OFFSET_RANGE_MIN -15
|
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||||
#define Z_PROBE_OFFSET_RANGE_MAX -5
|
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -572,13 +575,16 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//==============================LCD and SD support=============================
|
//==============================LCD and SD support=============================
|
||||||
|
|
||||||
// Define your display language below. Replace (en) with your language code and uncomment.
|
// Define your display language below. Replace (en) with your language code and uncomment.
|
||||||
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu
|
// en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu, kana, kana_utf8, test
|
||||||
// See also language.h
|
// See also language.h
|
||||||
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
||||||
|
|
||||||
// Character based displays can have different extended charsets.
|
// Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display.
|
||||||
#define DISPLAY_CHARSET_HD44780_JAPAN // "ääööüüß23°"
|
// To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset.
|
||||||
//#define DISPLAY_CHARSET_HD44780_WESTERN // "ÄäÖöÜüß²³°" if you see a '~' instead of a 'arrow_right' at the right of submenuitems - this is the right one.
|
// See also documentation/LCDLanguageFont.md
|
||||||
|
#define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_WESTERN
|
||||||
|
//#define DISPLAY_CHARSET_HD44780_CYRILLIC
|
||||||
|
|
||||||
//#define ULTRA_LCD //general LCD support, also 16x2
|
//#define ULTRA_LCD //general LCD support, also 16x2
|
||||||
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
|
||||||
|
@ -591,6 +597,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
//#define ULTIPANEL //the UltiPanel as on Thingiverse
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
|
||||||
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
|
||||||
|
// 0 to disable buzzer feedback
|
||||||
|
|
||||||
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
|
||||||
// http://reprap.org/wiki/PanelOne
|
// http://reprap.org/wiki/PanelOne
|
||||||
|
@ -645,7 +652,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
// Shift register panels
|
// Shift register panels
|
||||||
// ---------------------
|
// ---------------------
|
||||||
// 2 wire Non-latching LCD SR from:
|
// 2 wire Non-latching LCD SR from:
|
||||||
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
|
||||||
|
|
||||||
//#define SAV_3DLCD
|
//#define SAV_3DLCD
|
||||||
|
|
||||||
|
@ -653,7 +660,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
//#define FAST_PWM_FAN
|
//#define FAST_PWM_FAN
|
||||||
|
|
||||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||||
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
|
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||||
//#define FAN_SOFT_PWM
|
//#define FAN_SOFT_PWM
|
||||||
|
|
||||||
|
@ -707,9 +714,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
|
||||||
* Support for a filament diameter sensor
|
* Support for a filament diameter sensor
|
||||||
* Also allows adjustment of diameter at print time (vs at slicing)
|
* Also allows adjustment of diameter at print time (vs at slicing)
|
||||||
* Single extruder only at this point (extruder 0)
|
* Single extruder only at this point (extruder 0)
|
||||||
*
|
*
|
||||||
* Motherboards
|
* Motherboards
|
||||||
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
* 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector
|
||||||
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
* 81 - Printrboard - Uses Analog input 2 on the Exp1 connector (version B,C,D,E)
|
||||||
* 301 - Rambo - uses Analog input 3
|
* 301 - Rambo - uses Analog input 3
|
||||||
* Note may require analog pins to be defined for different motherboards
|
* Note may require analog pins to be defined for different motherboards
|
||||||
|
|
|
@ -77,10 +77,10 @@
|
||||||
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
// Multiple extruders can be assigned to the same pin in which case
|
// Multiple extruders can be assigned to the same pin in which case
|
||||||
// the fan will turn on when any selected extruder is above the threshold.
|
// the fan will turn on when any selected extruder is above the threshold.
|
||||||
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
#define EXTRUDER_0_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
#define EXTRUDER_1_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
||||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
@ -100,6 +100,30 @@
|
||||||
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
||||||
//#define Z_DUAL_STEPPER_DRIVERS
|
//#define Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
// Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper.
|
||||||
|
// That way the machine is capable to align the bed during home, since both Z steppers are homed.
|
||||||
|
// There is also an implementation of M666 (software endstops adjustment) to this feature.
|
||||||
|
// After Z homing, this adjustment is applied to just one of the steppers in order to align the bed.
|
||||||
|
// One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2.
|
||||||
|
// If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive.
|
||||||
|
// Play a little bit with small adjustments (0.5mm) and check the behaviour.
|
||||||
|
// The M119 (endstops report) will start reporting the Z2 Endstop as well.
|
||||||
|
|
||||||
|
#define Z_DUAL_ENDSTOPS
|
||||||
|
|
||||||
|
#ifdef Z_DUAL_ENDSTOPS
|
||||||
|
#define Z2_STEP_PIN E2_STEP_PIN // Stepper to be used to Z2 axis.
|
||||||
|
#define Z2_DIR_PIN E2_DIR_PIN
|
||||||
|
#define Z2_ENABLE_PIN E2_ENABLE_PIN
|
||||||
|
#define Z2_MAX_PIN 36 //Endstop used for Z2 axis. In this case I'm using XMAX in a Rumba Board (pin 36)
|
||||||
|
const bool Z2_MAX_ENDSTOP_INVERTING = false;
|
||||||
|
#define DISABLE_XMAX_ENDSTOP //Better to disable the XMAX to avoid conflict. Just rename "XMAX_ENDSTOP" by the endstop you are using for Z2 axis.
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
// Same again but for Y Axis.
|
// Same again but for Y Axis.
|
||||||
//#define Y_DUAL_STEPPER_DRIVERS
|
//#define Y_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
@ -112,41 +136,41 @@
|
||||||
// allowing faster printing speeds.
|
// allowing faster printing speeds.
|
||||||
//#define DUAL_X_CARRIAGE
|
//#define DUAL_X_CARRIAGE
|
||||||
#ifdef DUAL_X_CARRIAGE
|
#ifdef DUAL_X_CARRIAGE
|
||||||
// Configuration for second X-carriage
|
// Configuration for second X-carriage
|
||||||
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
||||||
// the second x-carriage always homes to the maximum endstop.
|
// the second x-carriage always homes to the maximum endstop.
|
||||||
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||||
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
||||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||||
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
||||||
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
||||||
// without modifying the firmware (through the "M218 T1 X???" command).
|
// without modifying the firmware (through the "M218 T1 X???" command).
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
||||||
#define X2_ENABLE_PIN 29
|
#define X2_ENABLE_PIN 29
|
||||||
#define X2_STEP_PIN 25
|
#define X2_STEP_PIN 25
|
||||||
#define X2_DIR_PIN 23
|
#define X2_DIR_PIN 23
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
||||||
|
|
||||||
// Default settings in "Auto-park Mode"
|
// Default settings in "Auto-park Mode"
|
||||||
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
||||||
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
||||||
|
|
||||||
// Default x offset in duplication mode (typically set to half print bed width)
|
// Default x offset in duplication mode (typically set to half print bed width)
|
||||||
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
||||||
|
|
||||||
#endif //DUAL_X_CARRIAGE
|
#endif //DUAL_X_CARRIAGE
|
||||||
|
|
||||||
|
@ -158,11 +182,7 @@
|
||||||
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
||||||
|
|
||||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||||
#ifdef CONFIG_STEPPERS_TOSHIBA
|
|
||||||
#define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers
|
|
||||||
#else
|
|
||||||
#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step)
|
|
||||||
#endif
|
|
||||||
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
||||||
#define INVERT_X_STEP_PIN false
|
#define INVERT_X_STEP_PIN false
|
||||||
#define INVERT_Y_STEP_PIN false
|
#define INVERT_Y_STEP_PIN false
|
||||||
|
@ -214,34 +234,44 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
||||||
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
||||||
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceed this value, multiple the steps moved by ten to quickly advance the value
|
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
|
||||||
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceed this value, multiple the steps moved by 100 to really quickly advance the value
|
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
|
||||||
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
||||||
|
|
||||||
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
||||||
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
||||||
|
|
||||||
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
#ifdef SDSUPPORT
|
||||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
|
||||||
|
|
||||||
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
||||||
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
||||||
// using:
|
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
||||||
//#define MENU_ADDAUTOSTART
|
// be commented out otherwise
|
||||||
|
#define SDCARDDETECTINVERTED
|
||||||
|
|
||||||
// Show a progress bar on the LCD when printing from SD?
|
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||||
//#define LCD_PROGRESS_BAR
|
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
||||||
|
|
||||||
#ifdef LCD_PROGRESS_BAR
|
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
||||||
// Amount of time (ms) to show the bar
|
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
||||||
#define PROGRESS_BAR_BAR_TIME 2000
|
// using:
|
||||||
// Amount of time (ms) to show the status message
|
//#define MENU_ADDAUTOSTART
|
||||||
#define PROGRESS_BAR_MSG_TIME 3000
|
|
||||||
// Amount of time (ms) to retain the status message (0=forever)
|
// Show a progress bar on HD44780 LCDs for SD printing
|
||||||
#define PROGRESS_MSG_EXPIRE 0
|
//#define LCD_PROGRESS_BAR
|
||||||
// Enable this to show messages for MSG_TIME then hide them
|
|
||||||
//#define PROGRESS_MSG_ONCE
|
#ifdef LCD_PROGRESS_BAR
|
||||||
#endif
|
// Amount of time (ms) to show the bar
|
||||||
|
#define PROGRESS_BAR_BAR_TIME 2000
|
||||||
|
// Amount of time (ms) to show the status message
|
||||||
|
#define PROGRESS_BAR_MSG_TIME 3000
|
||||||
|
// Amount of time (ms) to retain the status message (0=forever)
|
||||||
|
#define PROGRESS_MSG_EXPIRE 0
|
||||||
|
// Enable this to show messages for MSG_TIME then hide them
|
||||||
|
//#define PROGRESS_MSG_ONCE
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
|
|
||||||
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||||
//#define USE_WATCHDOG
|
//#define USE_WATCHDOG
|
||||||
|
@ -277,13 +307,9 @@
|
||||||
|
|
||||||
#ifdef ADVANCE
|
#ifdef ADVANCE
|
||||||
#define EXTRUDER_ADVANCE_K .0
|
#define EXTRUDER_ADVANCE_K .0
|
||||||
|
|
||||||
#define D_FILAMENT 2.85
|
#define D_FILAMENT 2.85
|
||||||
#define STEPS_MM_E 836
|
#define STEPS_MM_E 836
|
||||||
#define EXTRUTION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159)
|
#endif
|
||||||
#define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUTION_AREA)
|
|
||||||
|
|
||||||
#endif // ADVANCE
|
|
||||||
|
|
||||||
// Arc interpretation settings:
|
// Arc interpretation settings:
|
||||||
#define MM_PER_ARC_SEGMENT 1
|
#define MM_PER_ARC_SEGMENT 1
|
||||||
|
@ -291,12 +317,6 @@
|
||||||
|
|
||||||
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
||||||
|
|
||||||
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
|
|
||||||
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
|
|
||||||
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
|
|
||||||
// be commented out otherwise
|
|
||||||
#define SDCARDDETECTINVERTED
|
|
||||||
|
|
||||||
// Control heater 0 and heater 1 in parallel.
|
// Control heater 0 and heater 1 in parallel.
|
||||||
//#define HEATERS_PARALLEL
|
//#define HEATERS_PARALLEL
|
||||||
|
|
||||||
|
@ -306,7 +326,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
|
|
||||||
// The number of linear motions that can be in the plan at any give time.
|
// The number of linear motions that can be in the plan at any give time.
|
||||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
||||||
#if defined SDSUPPORT
|
#ifdef SDSUPPORT
|
||||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||||
#else
|
#else
|
||||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||||
|
@ -348,6 +368,139 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have TMC26X motor drivers.
|
||||||
|
* you need to import the TMC26XStepper library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_TMCDRIVER
|
||||||
|
#ifdef HAVE_TMCDRIVER
|
||||||
|
|
||||||
|
// #define X_IS_TMC
|
||||||
|
#define X_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define X2_IS_TMC
|
||||||
|
#define X2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y_IS_TMC
|
||||||
|
#define Y_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Y2_IS_TMC
|
||||||
|
#define Y2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z_IS_TMC
|
||||||
|
#define Z_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define Z2_IS_TMC
|
||||||
|
#define Z2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E0_IS_TMC
|
||||||
|
#define E0_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E0_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E1_IS_TMC
|
||||||
|
#define E1_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E1_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E2_IS_TMC
|
||||||
|
#define E2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
// #define E3_IS_TMC
|
||||||
|
#define E3_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E3_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have L6470 motor drivers.
|
||||||
|
* you need to import the L6470 library into the arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
//#define HAVE_L6470DRIVER
|
||||||
|
#ifdef HAVE_L6470DRIVER
|
||||||
|
|
||||||
|
// #define X_IS_L6470
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define X2_IS_L6470
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y_IS_L6470
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Y2_IS_L6470
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z_IS_L6470
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define Z2_IS_L6470
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E0_IS_L6470
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E1_IS_L6470
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E2_IS_L6470
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
// #define E3_IS_L6470
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be carefull not to go too high
|
||||||
|
#define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
#include "Conditionals.h"
|
#include "Conditionals.h"
|
||||||
#include "SanityCheck.h"
|
#include "SanityCheck.h"
|
||||||
|
|
||||||
|
|
Reference in a new issue