Cleanup for HAL_spi_Due.cpp

Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp

@@ -581,12 +581,35 @@
     // --------------------------------------------------------------------------
     // hardware SPI
     // --------------------------------------------------------------------------
+    static bool spiInitialized = false;
+
+    void spiInit(uint8_t spiRate) {
+      if (spiInitialized) return;
+
       // 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz
-    int spiDueDividors[] = { 10, 21, 42, 84, 168, 255, 255 };
+      constexpr int spiDivider[] = { 10, 21, 42, 84, 168, 255, 255 };
-    bool spiInitMaded = false;
+      if (spiRate > 6) spiRate = 1;
+
+      // Set SPI mode 1, clock, select not active after transfer, with delay between transfers
+      SPI_ConfigureNPCS(SPI0, SPI_CHAN_DAC,
+                        SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDivider[spiRate]) |
+                        SPI_CSR_DLYBCT(1));
+      // Set SPI mode 0, clock, select not active after transfer, with delay between transfers
+      SPI_ConfigureNPCS(SPI0, SPI_CHAN_EEPROM1, SPI_CSR_NCPHA |
+                        SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDivider[spiRate]) |
+                        SPI_CSR_DLYBCT(1));
+
+      // Set SPI mode 0, clock, select not active after transfer, with delay between transfers
+      SPI_ConfigureNPCS(SPI0, SPI_CHAN, SPI_CSR_NCPHA |
+                        SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDivider[spiRate]) |
+                        SPI_CSR_DLYBCT(1));
+      SPI_Enable(SPI0);
+      spiInitialized = true;
+    }
 
     void spiBegin() {
-      if (spiInitMaded == false) {
+      if (spiInitialized) return;
+
       // Configure SPI pins
       PIO_Configure(
          g_APinDescription[SCK_PIN].pPort,
@@ -608,7 +631,6 @@
       SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
       SPI_Enable(SPI0);
 
-        #if MB(ALLIGATOR)
       SET_OUTPUT(DAC0_SYNC);
       #if EXTRUDERS > 1
         SET_OUTPUT(DAC1_SYNC);
@@ -622,7 +644,6 @@
       WRITE(SPI_EEPROM2_CS, HIGH );
       WRITE(SPI_FLASH_CS, HIGH );
       WRITE(SS_PIN, HIGH );
-        #endif // MB(ALLIGATOR)
 
       OUT_WRITE(SDSS,0);
 
@@ -633,32 +654,51 @@
         g_APinDescription[SPI_PIN].ulPinConfiguration);
 
       spiInit(1);
-        spiInitMaded = true;
-      }
     }
 
-    void spiInit(uint8_t spiRate) {
+    // Read single byte from SPI
-      if (spiInitMaded == false) {
+    uint8_t spiRec() {
-        if (spiRate > 6) spiRate = 1;
+      // write dummy byte with address and end transmission flag
+      SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER;
+      // wait for transmit register empty
+      while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
 
-        #if MB(ALLIGATOR)
+      // wait for receive register
-          // Set SPI mode 1, clock, select not active after transfer, with delay between transfers
+      while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
-          SPI_ConfigureNPCS(SPI0, SPI_CHAN_DAC,
+      // get byte from receive register
-                            SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
+      //DELAY_US(1U);
-                            SPI_CSR_DLYBCT(1));
+      return SPI0->SPI_RDR;
-          // Set SPI mode 0, clock, select not active after transfer, with delay between transfers
-          SPI_ConfigureNPCS(SPI0, SPI_CHAN_EEPROM1, SPI_CSR_NCPHA |
-                            SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
-                            SPI_CSR_DLYBCT(1));
-        #endif//MB(ALLIGATOR)
-
-        // Set SPI mode 0, clock, select not active after transfer, with delay between transfers
-        SPI_ConfigureNPCS(SPI0, SPI_CHAN, SPI_CSR_NCPHA |
-                          SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
-                          SPI_CSR_DLYBCT(1));
-        SPI_Enable(SPI0);
-        spiInitMaded = true;
     }
+
+    uint8_t spiRec(uint32_t chan) {
+      uint8_t spirec_tmp;
+      // wait for transmit register empty
+      while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+      while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
+        spirec_tmp =  SPI0->SPI_RDR;
+        UNUSED(spirec_tmp);
+
+      // write dummy byte with address and end transmission flag
+      SPI0->SPI_TDR = 0x000000FF | SPI_PCS(chan) | SPI_TDR_LASTXFER;
+
+      // wait for receive register
+      while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+      // get byte from receive register
+      return SPI0->SPI_RDR;
+    }
+
+    // Read from SPI into buffer
+    void spiRead(uint8_t* buf, uint16_t nbyte) {
+      if (nbyte-- == 0) return;
+
+      for (int i = 0; i < nbyte; i++) {
+        //while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
+        SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN);
+        while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
+        buf[i] = SPI0->SPI_RDR;
+        //DELAY_US(1U);
+      }
+      buf[nbyte] = spiRec();
     }
 
     // Write single byte to SPI
@@ -714,51 +754,6 @@
       spiSend(chan, buf[n - 1]);
     }
 
-    // Read single byte from SPI
-    uint8_t spiRec() {
-      // write dummy byte with address and end transmission flag
-      SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER;
-      // wait for transmit register empty
-      while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
-
-      // wait for receive register
-      while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
-      // get byte from receive register
-      //DELAY_US(1U);
-      return SPI0->SPI_RDR;
-    }
-
-    uint8_t spiRec(uint32_t chan) {
-      uint8_t spirec_tmp;
-      // wait for transmit register empty
-      while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
-      while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
-        spirec_tmp =  SPI0->SPI_RDR;
-        UNUSED(spirec_tmp);
-
-      // write dummy byte with address and end transmission flag
-      SPI0->SPI_TDR = 0x000000FF | SPI_PCS(chan) | SPI_TDR_LASTXFER;
-
-      // wait for receive register
-      while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
-      // get byte from receive register
-      return SPI0->SPI_RDR;
-    }
-
-    // Read from SPI into buffer
-    void spiRead(uint8_t* buf, uint16_t nbyte) {
-      if (nbyte-- == 0) return;
-
-      for (int i = 0; i < nbyte; i++) {
-        //while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
-        SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN);
-        while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
-        buf[i] = SPI0->SPI_RDR;
-        //DELAY_US(1U);
-      }
-      buf[nbyte] = spiRec();
-    }
-
     // Write from buffer to SPI
     void spiSendBlock(uint8_t token, const uint8_t* buf) {
       SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN);
@@ -789,7 +784,7 @@
 
     void spiInit(uint8_t spiRate=6) {  // Default to slowest rate if not specified)
       // 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz
-      int spiDueDividors[] = { 10, 21, 42, 84, 168, 255, 255 };
+      constexpr int spiDivider[] = { 10, 21, 42, 84, 168, 255, 255 };
       if (spiRate > 6) spiRate = 1;
 
       // Enable PIOA and SPI0
@@ -809,7 +804,11 @@
       // Master mode, no fault detection, PCS bits in data written to TDR select CSR register
       SPI0->SPI_MR = SPI_MR_MSTR | SPI_MR_PS | SPI_MR_MODFDIS;
       // SPI mode 0, 8 Bit data transfer, baud rate
-      SPI0->SPI_CSR[3] = SPI_CSR_SCBR(spiDueDividors[spiRate]) | SPI_CSR_CSAAT | SPI_MODE_0_DUE_HW;  // use same CSR as TMC2130
+      SPI0->SPI_CSR[3] = SPI_CSR_SCBR(spiDivider[spiRate]) | SPI_CSR_CSAAT | SPI_MODE_0_DUE_HW;  // use same CSR as TMC2130
+    }
+
+    void spiBegin() {
+      spiInit();
     }
 
     static uint8_t spiTransfer(uint8_t data) {
@@ -828,10 +827,6 @@
       return SPI0->SPI_RDR;
     }
 
-    void spiBegin() {
-      spiInit();
-    }
-
     uint8_t spiRec() {
       uint8_t data = spiTransfer(0xFF);
       return data;