diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 1f0bc0559..104a797cb 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1880,7 +1880,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h
index 1f0bc0559..104a797cb 100644
--- a/Marlin/src/config/default/Configuration.h
+++ b/Marlin/src/config/default/Configuration.h
@@ -1880,7 +1880,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
index b09e0bfb7..6afa4a76f 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -1877,7 +1877,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
index e4508b29d..0c5044e8c 100644
--- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
+++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
@@ -1880,7 +1880,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h
index f0e6ead23..15c5c1a82 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration.h
@@ -2035,7 +2035,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h
index 652969bab..243004e9c 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration.h
@@ -1866,7 +1866,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
index 6cb02526c..0a6c03a48 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
@@ -1900,7 +1900,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
index 08ddfd9f4..791202ee1 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -1857,7 +1857,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
index 0a4f83028..c6625526b 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
@@ -1857,7 +1857,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
index adde4cf30..8aaeee32f 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
@@ -1845,7 +1845,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
index 891a722e0..be28e9ee6 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
@@ -1880,7 +1880,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
index e5de42f7e..a737bdf75 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
@@ -1845,7 +1845,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h
index 9d0155271..699921218 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration.h
@@ -1856,7 +1856,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
index f95cf69fa..23b40f86a 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
@@ -1890,7 +1890,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
index 40dde29f3..ce16d8f70 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
@@ -1881,7 +1881,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
index d1be6f598..475fdaef9 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
@@ -1899,7 +1899,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration.h b/Marlin/src/config/examples/Creality/CR-8/Configuration.h
index 1a5d4b10f..080a8ef80 100644
--- a/Marlin/src/config/examples/Creality/CR-8/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-8/Configuration.h
@@ -1890,7 +1890,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
index 5ebfe4394..f6d246a53 100644
--- a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
@@ -1884,7 +1884,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
index 54300ff1b..d963848db 100644
--- a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
@@ -1884,7 +1884,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
index b2796b94c..511c6ece9 100644
--- a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
@@ -1890,7 +1890,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h
index a88c4f5b6..8aeadeb90 100644
--- a/Marlin/src/config/examples/Felix/Configuration.h
+++ b/Marlin/src/config/examples/Felix/Configuration.h
@@ -1862,7 +1862,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
index 9bfaa9f87..a1fd1a9fc 100644
--- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h
+++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
@@ -1862,7 +1862,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
index f0ac0d614..d273ae8c7 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -1863,7 +1863,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
index 493a492f2..701bfff16 100644
--- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
@@ -1895,7 +1895,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index 5aea57a96..b21b159e1 100644
--- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -1880,7 +1880,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 4cd0a02a3..1f63eaae3 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
@@ -1896,7 +1896,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index d6a776669..226911d18 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
@@ -1895,7 +1895,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index dbf290355..794f9e617 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
@@ -1880,7 +1880,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index 632e418e5..b07e55658 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
@@ -1880,7 +1880,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
index eee0e13f4..a18577f83 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
@@ -1861,7 +1861,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
index 6a6f4191b..28d1eaa83 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
@@ -1891,7 +1891,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h
index 156f08d43..123173c71 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration.h
@@ -1877,7 +1877,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h
index 7fb76c2d0..5133bf509 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h
@@ -1885,7 +1885,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h
index 123d58c31..9b3005498 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h
@@ -1879,7 +1879,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
index 1eda0e38a..098b149ee 100644
--- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
@@ -1884,7 +1884,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
index 4562739e6..f5b1ef7fd 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -1861,7 +1861,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
index d1839c2fd..51dff291a 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
@@ -1857,7 +1857,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
index b7932fa21..f0217ec30 100644
--- a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
@@ -1929,7 +1929,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
index 05c8c59b7..1dd0e41fe 100644
--- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -1857,7 +1857,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h
index 5dfb32365..5379744fd 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration.h
@@ -1857,7 +1857,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h
index 85b412b61..50497c9ba 100644
--- a/Marlin/src/config/examples/SCARA/Configuration.h
+++ b/Marlin/src/config/examples/SCARA/Configuration.h
@@ -1870,7 +1870,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h
index 1d90ffea9..76efc90bb 100644
--- a/Marlin/src/config/examples/STM32F10/Configuration.h
+++ b/Marlin/src/config/examples/STM32F10/Configuration.h
@@ -1882,7 +1882,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/STM32F4/Configuration.h b/Marlin/src/config/examples/STM32F4/Configuration.h
index 43b6b5562..00fb09416 100644
--- a/Marlin/src/config/examples/STM32F4/Configuration.h
+++ b/Marlin/src/config/examples/STM32F4/Configuration.h
@@ -1880,7 +1880,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h
index 485f6c560..a8ec8b1df 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h
@@ -1911,7 +1911,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h
index 2485489c6..8da6fa860 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration.h
@@ -1857,7 +1857,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h
index e2520b0d8..5b9e13ea0 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h
@@ -1936,7 +1936,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
index ce0b0d8b0..759178b03 100644
--- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
@@ -1880,7 +1880,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
index c47e26e42..46ad95f9a 100644
--- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
@@ -1857,7 +1857,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
index 0770e0515..3d19372b3 100644
--- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
@@ -1891,7 +1891,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
index cff4bbadd..34b0e60cf 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
@@ -1880,7 +1880,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
index 84de01ab0..97215c9b1 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
@@ -1915,7 +1915,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
index c6a388dd0..cf35acc38 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
@@ -1857,7 +1857,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
index e6b1ccdad..d5dcea666 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -1857,7 +1857,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
index 78f3fb4f8..e1fb3214d 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h	
@@ -1893,7 +1893,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
index 26e0b4ddb..a5b8763b1 100644
--- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
+++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
@@ -1886,7 +1886,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index a1d2581df..5b7a29d28 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -1993,7 +1993,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
index eba89a317..f9cc2063f 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -1992,7 +1992,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 3a6dc2ff4..369dd65ff 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -2014,7 +2014,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 505d1077f..f9bb2a615 100644
--- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -1994,7 +1994,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h
index 2fd8f32c4..e6360aa25 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration.h
@@ -1979,7 +1979,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
index 3df1ca640..eed168e18 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
@@ -2004,7 +2004,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
index cd4457bbf..aad17a7c8 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
@@ -2005,7 +2005,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
index f8fcb4a69..f68396106 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
@@ -2005,7 +2005,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
index 884f574e5..d8a755e01 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -1894,7 +1894,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h
index 7e9117b6e..57ec8ee58 100644
--- a/Marlin/src/config/examples/makibox/Configuration.h
+++ b/Marlin/src/config/examples/makibox/Configuration.h
@@ -1883,7 +1883,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
index 0739a5836..fb18c0721 100644
--- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h
+++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
@@ -1882,7 +1882,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
index 373d8f0d3..dd59302c2 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
@@ -1852,7 +1852,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h
index 25a875369..57b090552 100644
--- a/Marlin/src/config/examples/wt150/Configuration.h
+++ b/Marlin/src/config/examples/wt150/Configuration.h
@@ -1885,7 +1885,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs