Merge pull request #4126 from thinkyhead/rc_lin_timing_patch

Patch LIN_ADVANCE timing issue
This commit is contained in:
Scott Lahteine 2016-06-22 19:24:44 -07:00 committed by GitHub
commit bdcd628896

View file

@ -451,7 +451,7 @@ void Stepper::isr() {
#endif // ADVANCE or LIN_ADVANCE #endif // ADVANCE or LIN_ADVANCE
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
eISR_Rate = (timer >> 2) / abs(e_steps[current_block->active_extruder]); eISR_Rate = (timer >> 2) * step_loops / abs(e_steps[current_block->active_extruder]);
#endif #endif
} }
else if (step_events_completed > (unsigned long)current_block->decelerate_after) { else if (step_events_completed > (unsigned long)current_block->decelerate_after) {
@ -487,7 +487,7 @@ void Stepper::isr() {
#endif // ADVANCE or LIN_ADVANCE #endif // ADVANCE or LIN_ADVANCE
#if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE) #if ENABLED(ADVANCE) || ENABLED(LIN_ADVANCE)
eISR_Rate = (timer >> 2) / abs(e_steps[current_block->active_extruder]); eISR_Rate = (timer >> 2) * step_loops / abs(e_steps[current_block->active_extruder]);
#endif #endif
} }
else { else {
@ -497,7 +497,7 @@ void Stepper::isr() {
if (current_block->use_advance_lead) if (current_block->use_advance_lead)
current_estep_rate[current_block->active_extruder] = final_estep_rate; current_estep_rate[current_block->active_extruder] = final_estep_rate;
eISR_Rate = (OCR1A_nominal >> 2) / abs(e_steps[current_block->active_extruder]); eISR_Rate = (OCR1A_nominal >> 2) * step_loops_nominal / abs(e_steps[current_block->active_extruder]);
#endif #endif
@ -542,16 +542,18 @@ void Stepper::isr() {
} }
// Step all E steppers that have steps // Step all E steppers that have steps
STEP_E_ONCE(0); for (uint8_t i = 0; i < step_loops; i++) {
#if EXTRUDERS > 1 STEP_E_ONCE(0);
STEP_E_ONCE(1); #if EXTRUDERS > 1
#if EXTRUDERS > 2 STEP_E_ONCE(1);
STEP_E_ONCE(2); #if EXTRUDERS > 2
#if EXTRUDERS > 3 STEP_E_ONCE(2);
STEP_E_ONCE(3); #if EXTRUDERS > 3
STEP_E_ONCE(3);
#endif
#endif #endif
#endif #endif
#endif }
} }