Merge pull request #5522 from esenapaj/Add-description-for-dual-x
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
This commit is contained in:
commit
bec30c89e7
18 changed files with 126 additions and 126 deletions
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -321,13 +321,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -316,13 +316,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -313,13 +313,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
|
@ -308,13 +308,13 @@
|
||||||
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
// Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
// as long as it supports dual x-carriages. (M605 S0)
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
// Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
// that additional slicer support is not required. (M605 S1)
|
// that additional slicer support is not required. (M605 S1)
|
||||||
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
// Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
// This is the default power-up mode which can be later using M605.
|
// This is the default power-up mode which can be later using M605.
|
||||||
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
|
||||||
|
|
Reference in a new issue