Bring MP_SCARA config up to date

This commit is contained in:
Scott Lahteine 2020-01-14 14:55:27 -06:00
parent ffd8b595d1
commit bfe4ceedd1
2 changed files with 223 additions and 92 deletions

View file

@ -365,9 +365,9 @@
//#define PSU_NAME "Power Supply" //#define PSU_NAME "Power Supply"
#if ENABLED(PSU_CONTROL) #if ENABLED(PSU_CONTROL)
#define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2) #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box
//#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80 //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
@ -393,9 +393,10 @@
* *
* Temperature sensors available: * Temperature sensors available:
* *
* -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
* -3 : thermocouple with MAX31855 (only for sensors 0-1)
* -2 : thermocouple with MAX6675 (only for sensors 0-1)
* -4 : thermocouple with AD8495 * -4 : thermocouple with AD8495
* -3 : thermocouple with MAX31855 (only for sensor 0)
* -2 : thermocouple with MAX6675 (only for sensor 0)
* -1 : thermocouple with AD595 * -1 : thermocouple with AD595
* 0 : not used * 0 : not used
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
@ -738,14 +739,14 @@
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] * X, Y, Z, E0 [, E1[, E2...]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 28.6738351, 28.6738351, 1600, 93 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 28.6738351, 28.6738351, 1600, 93 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] * X, Y, Z, E0 [, E1[, E2...]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 300, 300, 2.5, 25 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 2.5, 25 }
@ -758,7 +759,7 @@
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves) * (Maximum start speed for accelerated moves)
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] * X, Y, Z, E0 [, E1[, E2...]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 10, 20000 } #define DEFAULT_MAX_ACCELERATION { 1000, 1000, 10, 20000 }
@ -779,7 +780,6 @@
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
/** /**
* Default Jerk limits (mm/s) * Default Jerk limits (mm/s)
* Override with M205 X Y Z E * Override with M205 X Y Z E
@ -985,7 +985,7 @@
* *
* Use these settings to specify the distance (mm) to raise the probe (or * Use these settings to specify the distance (mm) to raise the probe (or
* lower the bed). The values set here apply over and above any (negative) * lower the bed). The values set here apply over and above any (negative)
* probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD.
* Only integer values >= 1 are valid here. * Only integer values >= 1 are valid here.
* *
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
@ -1296,19 +1296,6 @@
#endif // BED_LEVELING #endif // BED_LEVELING
/**
* Points to probe for all 3-point Leveling procedures.
* Override if the automatically selected points are inadequate.
*/
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
//#define PROBE_PT_1_X 15
//#define PROBE_PT_1_Y 180
//#define PROBE_PT_2_X 15
//#define PROBE_PT_2_Y 20
//#define PROBE_PT_3_X 170
//#define PROBE_PT_3_Y 20
#endif
/** /**
* Add a bed leveling sub-menu for ABL or MBL. * Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled. * Include a guided procedure if manual probing is enabled.
@ -2078,10 +2065,10 @@
//#define MALYAN_LCD //#define MALYAN_LCD
// //
// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays // Touch UI for FTDI EVE (FT800/FT810) displays
// See Configuration_adv.h for all configuration options. // See Configuration_adv.h for all configuration options.
// //
//#define LULZBOT_TOUCH_UI //#define TOUCH_UI_FTDI_EVE
// //
// Third-party or vendor-customized controller interfaces. // Third-party or vendor-customized controller interfaces.

View file

@ -264,7 +264,7 @@
#define AUTOTEMP_OLDWEIGHT 0.98 #define AUTOTEMP_OLDWEIGHT 0.98
#endif #endif
// Show extra position information in M114 // Show extra position information with 'M114 D'
//#define M114_DETAIL //#define M114_DETAIL
// Show Temperature ADC value // Show Temperature ADC value
@ -429,6 +429,7 @@
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
//#define CASE_LIGHT_MAX_PWM 128 // Limit pwm
//#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
//#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting.
//#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED.
@ -652,20 +653,32 @@
//#define Z_STEPPER_AUTO_ALIGN //#define Z_STEPPER_AUTO_ALIGN
#if ENABLED(Z_STEPPER_AUTO_ALIGN) #if ENABLED(Z_STEPPER_AUTO_ALIGN)
// Define probe X and Y positions for Z1, Z2 [, Z3] // Define probe X and Y positions for Z1, Z2 [, Z3]
#define Z_STEPPER_ALIGN_X { 10, 150, 290 } #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
#define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
// Provide Z stepper positions for more rapid convergence in bed alignment.
// Currently requires triple stepper drivers.
//#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
// Define Stepper XY positions for Z1, Z2, Z3 corresponding to
// the Z screw positions in the bed carriage.
// Define one position per Z stepper in stepper driver order.
#define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } }
#else
// Amplification factor. Used to scale the correction step up or down.
// In case the stepper (spindle) position is further out than the test point.
// Use a value > 1. NOTE: This may cause instability
#define Z_STEPPER_ALIGN_AMP 1.0
#endif
// Set number of iterations to align // Set number of iterations to align
#define Z_STEPPER_ALIGN_ITERATIONS 3 #define Z_STEPPER_ALIGN_ITERATIONS 3
// Enable to restore leveling setup after operation // Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G34 #define RESTORE_LEVELING_AFTER_G34
// On a 300mm bed a 5% grade would give a misalignment of ~1.5cm // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
#define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle
// Use the amplification factor to de-/increase correction step.
// In case the stepper (spindle) position is further out than the test point
// Use a value > 1. NOTE: This may cause instability
#define Z_STEPPER_ALIGN_AMP 1.0
// Stop criterion. If the accuracy is better than this stop iterating early // Stop criterion. If the accuracy is better than this stop iterating early
#define Z_STEPPER_ALIGN_ACC 0.02 #define Z_STEPPER_ALIGN_ACC 0.02
#endif #endif
@ -939,6 +952,18 @@
// Add an 'M73' G-code to set the current percentage // Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY //#define LCD_SET_PROGRESS_MANUALLY
// Show the E position (filament used) during printing
//#define LCD_SHOW_E_TOTAL
#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
//#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
//#define SHOW_REMAINING_TIME // Display estimated time to completion
#if ENABLED(SHOW_REMAINING_TIME)
//#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation
//#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time
#endif
#endif
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR) #if ENABLED(LCD_PROGRESS_BAR)
@ -982,6 +1007,8 @@
*/ */
//#define POWER_LOSS_RECOVERY //#define POWER_LOSS_RECOVERY
#if ENABLED(POWER_LOSS_RECOVERY) #if ENABLED(POWER_LOSS_RECOVERY)
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss //#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
//#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate
@ -1214,9 +1241,47 @@
#endif // HAS_GRAPHICAL_LCD #endif // HAS_GRAPHICAL_LCD
// //
// Lulzbot Touch UI // Additional options for DGUS / DWIN displays
// //
#if ENABLED(LULZBOT_TOUCH_UI) #if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//
#if ENABLED(TOUCH_UI_FTDI_EVE)
// Display board used // Display board used
//#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
//#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
@ -1255,21 +1320,48 @@
//#define TOUCH_UI_PORTRAIT //#define TOUCH_UI_PORTRAIT
//#define TOUCH_UI_MIRRORED //#define TOUCH_UI_MIRRORED
// Enable UTF8 rendering capabilities. // UTF8 processing and rendering.
// Unsupported characters are shown as '?'.
//#define TOUCH_UI_USE_UTF8 //#define TOUCH_UI_USE_UTF8
#if ENABLED(TOUCH_UI_USE_UTF8) #if ENABLED(TOUCH_UI_USE_UTF8)
// Western accents support. These accented characters use
// combined bitmaps and require relatively little storage.
#define TOUCH_UI_UTF8_WESTERN_CHARSET #define TOUCH_UI_UTF8_WESTERN_CHARSET
#if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET)
// Additional character groups. These characters require
// full bitmaps and take up considerable storage:
//#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³
//#define TOUCH_UI_UTF8_COPYRIGHT // © ®
//#define TOUCH_UI_UTF8_GERMANIC // ß
//#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ
//#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡
//#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥
//#define TOUCH_UI_UTF8_ORDINALS // º ª
//#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷
//#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾
//#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬
#endif
#endif #endif
// When labels do not fit buttons, use smaller font // Use a smaller font when labels don't fit buttons
#define TOUCH_UI_FIT_TEXT #define TOUCH_UI_FIT_TEXT
// Runtime language selection (otherwise LCD_LANGUAGE) // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE)
//#define TOUCH_UI_LANGUAGE_MENU //#define LCD_LANGUAGE_1 en
//#define LCD_LANGUAGE_2 fr
//#define LCD_LANGUAGE_3 de
//#define LCD_LANGUAGE_4 es
//#define LCD_LANGUAGE_5 it
// Use a numeric passcode for "Screen lock" keypad. // Use a numeric passcode for "Screen lock" keypad.
// (recommended for smaller displays) // (recommended for smaller displays)
//#define TOUCH_UI_PASSCODE //#define TOUCH_UI_PASSCODE
// Output extra debug info for Touch UI events
//#define TOUCH_UI_DEBUG
// Developer menu (accessed by touching "About Printer" copyright text)
//#define TOUCH_UI_DEVELOPER_MENU
#endif #endif
// //
@ -1314,7 +1406,8 @@
//#define BABYSTEP_WITHOUT_HOMING //#define BABYSTEP_WITHOUT_HOMING
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion.
#define BABYSTEP_MULTIPLICATOR_XY 1
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
@ -1363,6 +1456,43 @@
// @section leveling // @section leveling
/**
* Points to probe for all 3-point Leveling procedures.
* Override if the automatically selected points are inadequate.
*/
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
//#define PROBE_PT_1_X 15
//#define PROBE_PT_1_Y 180
//#define PROBE_PT_2_X 15
//#define PROBE_PT_2_Y 20
//#define PROBE_PT_3_X 170
//#define PROBE_PT_3_Y 20
#endif
/**
* Override MIN_PROBE_EDGE for each side of the build plate
* Useful to get probe points to exact positions on targets or
* to allow leveling to avoid plate clamps on only specific
* sides of the bed. With NOZZLE_AS_PROBE negative values are
* allowed, to permit probing outside the bed.
*
* If you are replacing the prior *_PROBE_BED_POSITION options,
* LEFT and FRONT values in most cases will map directly over
* RIGHT and REAR would be the inverse such as
* (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION)
*
* This will allow all positions to match at compilation, however
* should the probe position be modified with M851XY then the
* probe points will follow. This prevents any change from causing
* the probe to be unable to reach any points.
*/
#if PROBE_SELECTED && !IS_KINEMATIC
//#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE
//#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE
//#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE
//#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE
#endif
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large // Override the mesh area if the automatic (max) area is too large
//#define MESH_MIN_X MESH_INSET //#define MESH_MIN_X MESH_INSET
@ -1789,93 +1919,100 @@
#if AXIS_IS_TMC(X) #if AXIS_IS_TMC(X)
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
#define X_MICROSTEPS 16 // 0..256 #define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 #define X_RSENSE 0.11
#define X_CHAIN_POS 0 // 0 - Not chained, 1 - MCU MOSI connected, 2 - next in chain, ... #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ...
#endif #endif
#if AXIS_IS_TMC(X2) #if AXIS_IS_TMC(X2)
#define X2_CURRENT 800 #define X2_CURRENT 800
#define X2_CURRENT_HOME X2_CURRENT
#define X2_MICROSTEPS 16 #define X2_MICROSTEPS 16
#define X2_RSENSE 0.11 #define X2_RSENSE 0.11
#define X2_CHAIN_POS 0 #define X2_CHAIN_POS -1
#endif #endif
#if AXIS_IS_TMC(Y) #if AXIS_IS_TMC(Y)
#define Y_CURRENT 800 #define Y_CURRENT 800
#define Y_CURRENT_HOME Y_CURRENT
#define Y_MICROSTEPS 16 #define Y_MICROSTEPS 16
#define Y_RSENSE 0.11 #define Y_RSENSE 0.11
#define Y_CHAIN_POS 0 #define Y_CHAIN_POS -1
#endif #endif
#if AXIS_IS_TMC(Y2) #if AXIS_IS_TMC(Y2)
#define Y2_CURRENT 800 #define Y2_CURRENT 800
#define Y2_CURRENT_HOME Y2_CURRENT
#define Y2_MICROSTEPS 16 #define Y2_MICROSTEPS 16
#define Y2_RSENSE 0.11 #define Y2_RSENSE 0.11
#define Y2_CHAIN_POS 0 #define Y2_CHAIN_POS -1
#endif #endif
#if AXIS_IS_TMC(Z) #if AXIS_IS_TMC(Z)
#define Z_CURRENT 800 #define Z_CURRENT 800
#define Z_CURRENT_HOME Z_CURRENT
#define Z_MICROSTEPS 16 #define Z_MICROSTEPS 16
#define Z_RSENSE 0.11 #define Z_RSENSE 0.11
#define Z_CHAIN_POS 0 #define Z_CHAIN_POS -1
#endif #endif
#if AXIS_IS_TMC(Z2) #if AXIS_IS_TMC(Z2)
#define Z2_CURRENT 800 #define Z2_CURRENT 800
#define Z2_CURRENT_HOME Z2_CURRENT
#define Z2_MICROSTEPS 16 #define Z2_MICROSTEPS 16
#define Z2_RSENSE 0.11 #define Z2_RSENSE 0.11
#define Z2_CHAIN_POS 0 #define Z2_CHAIN_POS -1
#endif #endif
#if AXIS_IS_TMC(Z3) #if AXIS_IS_TMC(Z3)
#define Z3_CURRENT 800 #define Z3_CURRENT 800
#define Z3_CURRENT_HOME Z3_CURRENT
#define Z3_MICROSTEPS 16 #define Z3_MICROSTEPS 16
#define Z3_RSENSE 0.11 #define Z3_RSENSE 0.11
#define Z3_CHAIN_POS 0 #define Z3_CHAIN_POS -1
#endif #endif
#if AXIS_IS_TMC(E0) #if AXIS_IS_TMC(E0)
#define E0_CURRENT 800 #define E0_CURRENT 800
#define E0_MICROSTEPS 16 #define E0_MICROSTEPS 16
#define E0_RSENSE 0.11 #define E0_RSENSE 0.11
#define E0_CHAIN_POS 0 #define E0_CHAIN_POS -1
#endif #endif
#if AXIS_IS_TMC(E1) #if AXIS_IS_TMC(E1)
#define E1_CURRENT 800 #define E1_CURRENT 800
#define E1_MICROSTEPS 16 #define E1_MICROSTEPS 16
#define E1_RSENSE 0.11 #define E1_RSENSE 0.11
#define E1_CHAIN_POS 0 #define E1_CHAIN_POS -1
#endif #endif
#if AXIS_IS_TMC(E2) #if AXIS_IS_TMC(E2)
#define E2_CURRENT 800 #define E2_CURRENT 800
#define E2_MICROSTEPS 16 #define E2_MICROSTEPS 16
#define E2_RSENSE 0.11 #define E2_RSENSE 0.11
#define E2_CHAIN_POS 0 #define E2_CHAIN_POS -1
#endif #endif
#if AXIS_IS_TMC(E3) #if AXIS_IS_TMC(E3)
#define E3_CURRENT 800 #define E3_CURRENT 800
#define E3_MICROSTEPS 16 #define E3_MICROSTEPS 16
#define E3_RSENSE 0.11 #define E3_RSENSE 0.11
#define E3_CHAIN_POS 0 #define E3_CHAIN_POS -1
#endif #endif
#if AXIS_IS_TMC(E4) #if AXIS_IS_TMC(E4)
#define E4_CURRENT 800 #define E4_CURRENT 800
#define E4_MICROSTEPS 16 #define E4_MICROSTEPS 16
#define E4_RSENSE 0.11 #define E4_RSENSE 0.11
#define E4_CHAIN_POS 0 #define E4_CHAIN_POS -1
#endif #endif
#if AXIS_IS_TMC(E5) #if AXIS_IS_TMC(E5)
#define E5_CURRENT 800 #define E5_CURRENT 800
#define E5_MICROSTEPS 16 #define E5_MICROSTEPS 16
#define E5_RSENSE 0.11 #define E5_RSENSE 0.11
#define E5_CHAIN_POS 0 #define E5_CHAIN_POS -1
#endif #endif
/** /**
@ -2069,8 +2206,8 @@
* *
* Example: * Example:
* #define TMC_ADV() { \ * #define TMC_ADV() { \
* stepperX.diag0_temp_prewarn(1); \ * stepperX.diag0_otpw(1); \
* stepperY.interpolate(0); \ * stepperY.intpol(0); \
* } * }
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
@ -2546,6 +2683,13 @@
//#define HOST_PROMPT_SUPPORT //#define HOST_PROMPT_SUPPORT
#endif #endif
/**
* Cancel Objects
*
* Implement M486 to allow Marlin to skip objects
*/
//#define CANCEL_OBJECTS
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
* Developed by Chris Barr at Aus3D. * Developed by Chris Barr at Aus3D.