diff --git a/Marlin/src/feature/dac/stepper_dac.cpp b/Marlin/src/feature/dac/stepper_dac.cpp
index 565b62a39..320e88c69 100644
--- a/Marlin/src/feature/dac/stepper_dac.cpp
+++ b/Marlin/src/feature/dac/stepper_dac.cpp
@@ -68,7 +68,7 @@ void dac_current_percent(uint8_t channel, float val) {
void dac_current_raw(uint8_t channel, uint16_t val) {
if (!dac_present) return;
- NOMORE(val, DAC_STEPPER_MAX);
+ NOMORE(val, uint16_t(DAC_STEPPER_MAX));
mcp4728_analogWrite(dac_order[channel], val);
mcp4728_simpleCommand(UPDATE);
diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp
index cbd320e4c..4c3513c20 100644
--- a/Marlin/src/module/planner.cpp
+++ b/Marlin/src/module/planner.cpp
@@ -1395,7 +1395,7 @@ void Planner::check_axes_activity() {
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
const float fade_scaling_factor = fade_scaling_factor_for_z(raw.z);
- #else
+ #elif DISABLED(MESH_BED_LEVELING)
constexpr float fade_scaling_factor = 1.0;
#endif
@@ -1432,7 +1432,7 @@ void Planner::check_axes_activity() {
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
const float fade_scaling_factor = fade_scaling_factor_for_z(raw.z);
- #else
+ #elif DISABLED(MESH_BED_LEVELING)
constexpr float fade_scaling_factor = 1.0;
#endif
diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index 1ff818bd2..b110afb85 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -2912,6 +2912,7 @@ void Temperature::tick() {
) {
#if TEMP_RESIDENCY_TIME > 0
millis_t residency_start_ms = 0;
+ bool first_loop = true;
// Loop until the temperature has stabilized
#define TEMP_CONDITIONS (!residency_start_ms || PENDING(now, residency_start_ms + (TEMP_RESIDENCY_TIME) * 1000UL))
#else
@@ -2929,7 +2930,7 @@ void Temperature::tick() {
#endif
float target_temp = -1.0, old_temp = 9999.0;
- bool wants_to_cool = false, first_loop = true;
+ bool wants_to_cool = false;
wait_for_heatup = true;
millis_t now, next_temp_ms = 0, next_cool_check_ms = 0;
do {
@@ -2982,6 +2983,8 @@ void Temperature::tick() {
residency_start_ms = now;
}
+ first_loop = false;
+
#endif
// Prevent a wait-forever situation if R is misused i.e. M109 R0
@@ -3002,8 +3005,6 @@ void Temperature::tick() {
}
#endif
- first_loop = false;
-
} while (wait_for_heatup && TEMP_CONDITIONS);
if (wait_for_heatup) {
@@ -3151,6 +3152,7 @@ void Temperature::tick() {
bool Temperature::wait_for_chamber(const bool no_wait_for_cooling/*=true*/) {
#if TEMP_CHAMBER_RESIDENCY_TIME > 0
millis_t residency_start_ms = 0;
+ bool first_loop = true;
// Loop until the temperature has stabilized
#define TEMP_CHAMBER_CONDITIONS (!residency_start_ms || PENDING(now, residency_start_ms + (TEMP_CHAMBER_RESIDENCY_TIME) * 1000UL))
#else
@@ -3159,7 +3161,7 @@ void Temperature::tick() {
#endif
float target_temp = -1, old_temp = 9999;
- bool wants_to_cool = false, first_loop = true;
+ bool wants_to_cool = false;
wait_for_heatup = true;
millis_t now, next_temp_ms = 0, next_cool_check_ms = 0;
@@ -3212,6 +3214,7 @@ void Temperature::tick() {
residency_start_ms = now;
}
+ first_loop = false;
#endif // TEMP_CHAMBER_RESIDENCY_TIME > 0
// Prevent a wait-forever situation if R is misused i.e. M191 R0
@@ -3224,9 +3227,6 @@ void Temperature::tick() {
old_temp = temp;
}
}
-
- first_loop = false;
-
} while (wait_for_heatup && TEMP_CHAMBER_CONDITIONS);
if (wait_for_heatup) ui.reset_status();
diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_11.h b/Marlin/src/pins/mega/pins_CNCONTROLS_11.h
index 3915c1cfe..d54fbb13b 100644
--- a/Marlin/src/pins/mega/pins_CNCONTROLS_11.h
+++ b/Marlin/src/pins/mega/pins_CNCONTROLS_11.h
@@ -1,3 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
/**
* CartesioV11 pin assignments
*/
diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_12.h b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h
index b9a96c410..5628df7f1 100644
--- a/Marlin/src/pins/mega/pins_CNCONTROLS_12.h
+++ b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h
@@ -1,3 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
/**
* CartesioV12 pin assignments
*/
diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_15.h b/Marlin/src/pins/mega/pins_CNCONTROLS_15.h
index 2fad8d576..c62be6bef 100644
--- a/Marlin/src/pins/mega/pins_CNCONTROLS_15.h
+++ b/Marlin/src/pins/mega/pins_CNCONTROLS_15.h
@@ -1,3 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
/**
* CNControls V15 for HMS434 pin assignments
*/
@@ -64,7 +87,7 @@
//
// Fans
//
-#define FAN0_PIN 8
+#define FAN_PIN 8
#define ORIG_E0_AUTO_FAN_PIN 30
#define ORIG_E1_AUTO_FAN_PIN 30
#define ORIG_E2_AUTO_FAN_PIN 30
diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h
index 676197b84..f6ccff24f 100644
--- a/Marlin/src/pins/ramps/pins_RAMPS.h
+++ b/Marlin/src/pins/ramps/pins_RAMPS.h
@@ -508,7 +508,9 @@
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN 49
#endif
- #define KILL_PIN 41
+ #ifndef KILL_PIN
+ #define KILL_PIN 41
+ #endif
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
#define LCD_BACKLIGHT_PIN 39
diff --git a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h
index 9fc7d6f1a..d6d7efcf7 100644
--- a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h
+++ b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h
@@ -156,9 +156,21 @@
//
#if HAS_SPI_LCD
+ #define SD_DETECT_PIN -1
+
#if HAS_GRAPHICAL_LCD
- #if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
+ #if ENABLED(LCD_FOR_MELZI)
+
+ #define LCD_PINS_RS 17
+ #define LCD_PINS_ENABLE 16
+ #define LCD_PINS_D4 11
+
+ #define BOARD_ST7920_DELAY_1 DELAY_NS(0)
+ #define BOARD_ST7920_DELAY_2 DELAY_NS(188)
+ #define BOARD_ST7920_DELAY_3 DELAY_NS(0)
+
+ #elif ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
#if IS_MELZI
#define LCD_PINS_RS 30 // CS chip select /SS chip slave select
@@ -177,7 +189,7 @@
#define LCD_PINS_D7 27
#endif
- #else // DOGM SPI LCD Support
+ #else
#define DOGLCD_A0 30
@@ -201,71 +213,64 @@
#endif
// Uncomment screen orientation
- #define LCD_SCREEN_ROT_0
+ //#define LCD_SCREEN_ROT_0
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
- #else // !HAS_GRAPHICAL_LCD
+ #elif ENABLED(ZONESTAR_LCD) // For the Tronxy Melzi boards
- #define LCD_PINS_RS 4
- #define LCD_PINS_ENABLE 17
- #define LCD_PINS_D4 30
- #define LCD_PINS_D5 29
- #define LCD_PINS_D6 28
- #define LCD_PINS_D7 27
+ #define LCD_PINS_RS 28
+ #define LCD_PINS_ENABLE 29
+ #define LCD_PINS_D4 10
+ #define LCD_PINS_D5 11
+ #define LCD_PINS_D6 16
+ #define LCD_PINS_D7 17
- #endif // !HAS_GRAPHICAL_LCD
+ #else
- #if ENABLED(LCD_I2C_PANELOLU2)
+ #define LCD_PINS_RS 4
+ #define LCD_PINS_ENABLE 17
+ #define LCD_PINS_D4 30
+ #define LCD_PINS_D5 29
+ #define LCD_PINS_D6 28
+ #define LCD_PINS_D7 27
- #if IS_MELZI
- #define BTN_ENC 29
- #define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi
- #else
- #define BTN_ENC 30
- #endif
+ #endif
- #elif ENABLED(LCD_FOR_MELZI)
+ #if ENABLED(LCD_FOR_MELZI)
- #define LCD_PINS_RS 17
- #define LCD_PINS_ENABLE 16
- #define LCD_PINS_D4 11
- #define BTN_ENC 28
- #define BTN_EN1 29
- #define BTN_EN2 30
-
- #define BOARD_ST7920_DELAY_1 DELAY_NS(0)
- #define BOARD_ST7920_DELAY_2 DELAY_NS(188)
- #define BOARD_ST7920_DELAY_3 DELAY_NS(0)
+ #define BTN_ENC 28
+ #define BTN_EN1 29
+ #define BTN_EN2 30
#elif ENABLED(ZONESTAR_LCD) // For the Tronxy Melzi boards
- #define LCD_PINS_RS 28
- #define LCD_PINS_ENABLE 29
- #define LCD_PINS_D4 10
- #define LCD_PINS_D5 11
- #define LCD_PINS_D6 16
- #define LCD_PINS_D7 17
- #define ADC_KEYPAD_PIN 1
+ #define ADC_KEYPAD_PIN 1
+ #define BTN_EN1 -1
+ #define BTN_EN2 -1
- #define BTN_EN1 -1
- #define BTN_EN2 -1
+ #elif ENABLED(LCD_I2C_PANELOLU2)
- #else // !LCD_I2C_PANELOLU2 && !LCD_FOR_MELZI && !ZONESTAR_LCD
+ #if IS_MELZI
+ #define BTN_ENC 29
+ #define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi
+ #else
+ #define BTN_ENC 30
+ #endif
- #define BTN_ENC 16
- #define LCD_SDSS 28 // Smart Controller SD card reader rather than the Melzi
+ #else // !LCD_FOR_MELZI && !ZONESTAR_LCD && !LCD_I2C_PANELOLU2
+
+ #define BTN_ENC 16
+ #define LCD_SDSS 28 // Smart Controller SD card reader rather than the Melzi
#endif
#if ENABLED(NEWPANEL) && !defined(BTN_EN1)
- #define BTN_EN1 11
- #define BTN_EN2 10
+ #define BTN_EN1 11
+ #define BTN_EN2 10
#endif
- #define SD_DETECT_PIN -1
-
#endif // HAS_SPI_LCD
//
diff --git a/Marlin/src/sd/cardreader.cpp b/Marlin/src/sd/cardreader.cpp
index ec75206bd..cb8310f17 100644
--- a/Marlin/src/sd/cardreader.cpp
+++ b/Marlin/src/sd/cardreader.cpp
@@ -678,7 +678,7 @@ void CardReader::selectFileByIndex(const uint16_t nr) {
//
void CardReader::selectFileByName(const char * const match) {
#if ENABLED(SDSORT_CACHE_NAMES)
- for (int nr = 0; nr < sort_count; nr++)
+ for (uint16_t nr = 0; nr < sort_count; nr++)
if (strcasecmp(match, sortshort[nr]) == 0) {
strcpy(filename, sortshort[nr]);
strcpy(longFilename, sortnames[nr]);