Deltabot settings and configuration adjustments.
This commit is contained in:
parent
fcd9de72ef
commit
c430906d3b
2 changed files with 66 additions and 31 deletions
|
@ -9,7 +9,7 @@
|
||||||
//Implementation of an idea by Prof Braino to inform user that any changes made
|
//Implementation of an idea by Prof Braino to inform user that any changes made
|
||||||
//to this build by the user have been successfully uploaded into firmware.
|
//to this build by the user have been successfully uploaded into firmware.
|
||||||
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
|
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
|
||||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" //Who made the changes.
|
#define STRING_CONFIG_H_AUTHOR "(jcrocholl, deltabot)" //Who made the changes.
|
||||||
|
|
||||||
// SERIAL_PORT selects which serial port should be used for communication with the host.
|
// SERIAL_PORT selects which serial port should be used for communication with the host.
|
||||||
// This allows the connection of wireless adapters (for instance) to non-default port pins.
|
// This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||||
|
@ -46,10 +46,42 @@
|
||||||
// Rambo = 301
|
// Rambo = 301
|
||||||
|
|
||||||
#ifndef MOTHERBOARD
|
#ifndef MOTHERBOARD
|
||||||
#define MOTHERBOARD 7
|
#define MOTHERBOARD 33
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
//===========================================================================
|
||||||
|
//============================== Delta Settings =============================
|
||||||
|
//===========================================================================
|
||||||
|
|
||||||
|
// Make delta curves from many straight lines (linear interpolation).
|
||||||
|
// This is a trade-off between visible corners (not enough segments)
|
||||||
|
// and processor overload (too many expensive sqrt calls).
|
||||||
|
#define DELTA_SEGMENTS_PER_SECOND 200
|
||||||
|
|
||||||
|
// Center-to-center distance of the holes in the diagonal push rods.
|
||||||
|
#define DELTA_DIAGONAL_ROD 250.0 // mm
|
||||||
|
|
||||||
|
// Horizontal offset from middle of printer to smooth rod center.
|
||||||
|
#define DELTA_SMOOTH_ROD_OFFSET 175.0 // mm
|
||||||
|
|
||||||
|
// Horizontal offset of the universal joints on the end effector.
|
||||||
|
#define DELTA_EFFECTOR_OFFSET 33.0 // mm
|
||||||
|
|
||||||
|
// Horizontal offset of the universal joints on the carriages.
|
||||||
|
#define DELTA_CARRIAGE_OFFSET 18.0 // mm
|
||||||
|
|
||||||
|
// Effective horizontal distance bridged by diagonal push rods.
|
||||||
|
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-DELTA_EFFECTOR_OFFSET-DELTA_CARRIAGE_OFFSET)
|
||||||
|
|
||||||
|
// Effective X/Y positions of the three vertical towers.
|
||||||
|
#define SIN_60 0.8660254037844386
|
||||||
|
#define COS_60 0.5
|
||||||
|
#define DELTA_TOWER1_X -SIN_60*DELTA_RADIUS // front left tower
|
||||||
|
#define DELTA_TOWER1_Y -COS_60*DELTA_RADIUS
|
||||||
|
#define DELTA_TOWER2_X SIN_60*DELTA_RADIUS // front right tower
|
||||||
|
#define DELTA_TOWER2_Y -COS_60*DELTA_RADIUS
|
||||||
|
#define DELTA_TOWER3_X 0.0 // back middle tower
|
||||||
|
#define DELTA_TOWER3_Y DELTA_RADIUS
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//=============================Thermal Settings ============================
|
//=============================Thermal Settings ============================
|
||||||
|
@ -75,7 +107,7 @@
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan) (1k pullup)
|
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan) (1k pullup)
|
||||||
|
|
||||||
#define TEMP_SENSOR_0 -1
|
#define TEMP_SENSOR_0 1
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_BED 0
|
#define TEMP_SENSOR_BED 0
|
||||||
|
@ -211,9 +243,9 @@
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
|
||||||
const bool X_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
|
const bool X_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops.
|
||||||
const bool Y_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
|
const bool Y_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops.
|
||||||
const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
|
const bool Z_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops.
|
||||||
//#define DISABLE_MAX_ENDSTOPS
|
//#define DISABLE_MAX_ENDSTOPS
|
||||||
|
|
||||||
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
|
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
|
||||||
|
@ -228,27 +260,29 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||||
#define DISABLE_Z false
|
#define DISABLE_Z false
|
||||||
#define DISABLE_E false // For all extruders
|
#define DISABLE_E false // For all extruders
|
||||||
|
|
||||||
#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
|
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
|
||||||
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
|
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
|
||||||
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
|
#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true
|
||||||
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||||
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||||
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||||
|
|
||||||
// ENDSTOP SETTINGS:
|
// ENDSTOP SETTINGS:
|
||||||
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
// Sets direction of endstops when homing; 1=MAX, -1=MIN
|
||||||
#define X_HOME_DIR -1
|
#define X_HOME_DIR 1
|
||||||
#define Y_HOME_DIR -1
|
#define Y_HOME_DIR 1
|
||||||
#define Z_HOME_DIR -1
|
#define Z_HOME_DIR 1
|
||||||
|
|
||||||
|
#define min_software_endstops false //If true, axis won't move to coordinates less than HOME_POS.
|
||||||
|
#define max_software_endstops false //If true, axis won't move to coordinates greater than the defined lengths below.
|
||||||
|
|
||||||
#define min_software_endstops true //If true, axis won't move to coordinates less than HOME_POS.
|
|
||||||
#define max_software_endstops true //If true, axis won't move to coordinates greater than the defined lengths below.
|
|
||||||
// Travel limits after homing
|
// Travel limits after homing
|
||||||
#define X_MAX_POS 205
|
// For deltabots, the MAX_POS doesn't have to be exact, it will be recalculated from MANUAL_Z_HOME_POS below.
|
||||||
|
#define X_MAX_POS 620
|
||||||
#define X_MIN_POS 0
|
#define X_MIN_POS 0
|
||||||
#define Y_MAX_POS 205
|
#define Y_MAX_POS 620
|
||||||
#define Y_MIN_POS 0
|
#define Y_MIN_POS 0
|
||||||
#define Z_MAX_POS 200
|
#define Z_MAX_POS 620
|
||||||
#define Z_MIN_POS 0
|
#define Z_MIN_POS 0
|
||||||
|
|
||||||
#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS)
|
#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS)
|
||||||
|
@ -256,31 +290,32 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
|
||||||
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
|
||||||
|
|
||||||
// The position of the homing switches
|
// The position of the homing switches
|
||||||
//#define MANUAL_HOME_POSITIONS // If defined, manualy programed locations will be used
|
#define MANUAL_HOME_POSITIONS // If defined, manualy programed locations will be used
|
||||||
//#define BED_CENTER_AT_0_0 // If defined the center of the bed is defined as (0,0)
|
//#define BED_CENTER_AT_0_0 // If defined the center of the bed is defined as (0,0)
|
||||||
|
|
||||||
//Manual homing switch locations:
|
// Manual homing switch locations:
|
||||||
|
// For deltabots this means top and center of the cartesian print volume.
|
||||||
#define MANUAL_X_HOME_POS 0
|
#define MANUAL_X_HOME_POS 0
|
||||||
#define MANUAL_Y_HOME_POS 0
|
#define MANUAL_Y_HOME_POS 0
|
||||||
#define MANUAL_Z_HOME_POS 0
|
#define MANUAL_Z_HOME_POS 402 // Distance between nozzle and print surface after homing.
|
||||||
|
|
||||||
//// MOVEMENT SETTINGS
|
//// MOVEMENT SETTINGS
|
||||||
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
||||||
#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min)
|
#define HOMING_FEEDRATE {100*60, 100*60, 100*60, 0} // set the homing speeds (mm/min)
|
||||||
|
|
||||||
// default settings
|
// default settings
|
||||||
|
|
||||||
#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200*8/3,760*1.1} // default steps per unit for ultimaker
|
#define DEFAULT_AXIS_STEPS_PER_UNIT {40, 40, 40, 100}
|
||||||
#define DEFAULT_MAX_FEEDRATE {500, 500, 5, 45} // (mm/sec)
|
#define DEFAULT_MAX_FEEDRATE {300, 300, 300, 300} // (mm/sec)
|
||||||
#define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot.
|
#define DEFAULT_MAX_ACCELERATION {9000, 9000, 9000, 9000} // X, Y, Z, E maximum start speed for accelerated moves.
|
||||||
|
|
||||||
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
|
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
|
||||||
#define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for r retracts
|
#define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for r retracts
|
||||||
|
|
||||||
//
|
//
|
||||||
#define DEFAULT_XYJERK 20.0 // (mm/sec)
|
#define DEFAULT_XYJERK 20.0 // (mm/sec)
|
||||||
#define DEFAULT_ZJERK 0.4 // (mm/sec)
|
#define DEFAULT_ZJERK 20.0 // (mm/sec)
|
||||||
#define DEFAULT_EJERK 5.0 // (mm/sec)
|
#define DEFAULT_EJERK 20.0 // (mm/sec)
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//=============================Additional Features===========================
|
//=============================Additional Features===========================
|
||||||
|
|
|
@ -140,7 +140,7 @@
|
||||||
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
||||||
#define X_HOME_RETRACT_MM 5
|
#define X_HOME_RETRACT_MM 5
|
||||||
#define Y_HOME_RETRACT_MM 5
|
#define Y_HOME_RETRACT_MM 5
|
||||||
#define Z_HOME_RETRACT_MM 1
|
#define Z_HOME_RETRACT_MM 5
|
||||||
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
||||||
|
|
||||||
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||||
|
@ -163,7 +163,7 @@
|
||||||
#define DEFAULT_MINSEGMENTTIME 20000
|
#define DEFAULT_MINSEGMENTTIME 20000
|
||||||
|
|
||||||
// If defined the movements slow down when the look ahead buffer is only half full
|
// If defined the movements slow down when the look ahead buffer is only half full
|
||||||
#define SLOWDOWN
|
//#define SLOWDOWN
|
||||||
|
|
||||||
// Frequency limit
|
// Frequency limit
|
||||||
// See nophead's blog for more info
|
// See nophead's blog for more info
|
||||||
|
@ -250,7 +250,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st
|
||||||
#if defined SDSUPPORT
|
#if defined SDSUPPORT
|
||||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||||
#else
|
#else
|
||||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
#define BLOCK_BUFFER_SIZE 64 // maximize block buffer
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
|
Reference in a new issue