Fix indentation, stepper.h dependency, etc.

This commit is contained in:
Scott Lahteine 2017-11-22 14:51:42 -06:00 committed by Scott Lahteine
parent f011a32771
commit c613a1ed38
3 changed files with 148 additions and 149 deletions

View file

@ -105,8 +105,6 @@ ring_buffer_r rx_buffer = { { 0 }, 0, 0 };
#if ENABLED(EMERGENCY_PARSER) #if ENABLED(EMERGENCY_PARSER)
#include "../../module/stepper.h"
// Currently looking for: M108, M112, M410 // Currently looking for: M108, M112, M410
// If you alter the parser please don't forget to update the capabilities in Conditionals_post.h // If you alter the parser please don't forget to update the capabilities in Conditionals_post.h
@ -213,14 +211,14 @@ FORCE_INLINE void store_rxd_char() {
else if (!++rx_dropped_bytes) ++rx_dropped_bytes; else if (!++rx_dropped_bytes) ++rx_dropped_bytes;
#endif #endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
// calculate count of bytes stored into the RX buffer // calculate count of bytes stored into the RX buffer
ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(rx_buffer.head - rx_buffer.tail) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(rx_buffer.head - rx_buffer.tail) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
// Keep track of the maximum count of enqueued bytes // Keep track of the maximum count of enqueued bytes
NOLESS(rx_max_enqueued, rx_count); NOLESS(rx_max_enqueued, rx_count);
#endif #endif
#if ENABLED(SERIAL_XON_XOFF) #if ENABLED(SERIAL_XON_XOFF)
// for high speed transfers, we can use XON/XOFF protocol to do // for high speed transfers, we can use XON/XOFF protocol to do
// software handshake and avoid overruns. // software handshake and avoid overruns.
@ -263,11 +261,11 @@ FORCE_INLINE void store_rxd_char() {
} }
} }
} }
#endif // SERIAL_XON_XOFF #endif // SERIAL_XON_XOFF
#if ENABLED(EMERGENCY_PARSER) #if ENABLED(EMERGENCY_PARSER)
emergency_parser(c); emergency_parser(c);
#endif #endif
} }
#if TX_BUFFER_SIZE > 0 #if TX_BUFFER_SIZE > 0
@ -296,7 +294,7 @@ FORCE_INLINE void store_rxd_char() {
HWUART->UART_IDR = UART_IDR_TXRDY; HWUART->UART_IDR = UART_IDR_TXRDY;
} }
#endif // TX_BUFFER_SIZE #endif // TX_BUFFER_SIZE > 0
static void UART_ISR(void) { static void UART_ISR(void) {
uint32_t status = HWUART->UART_SR; uint32_t status = HWUART->UART_SR;
@ -427,15 +425,16 @@ void MarlinSerial::flush(void) {
rx_buffer.head = rx_buffer.tail; rx_buffer.head = rx_buffer.tail;
CRITICAL_SECTION_END; CRITICAL_SECTION_END;
#if ENABLED(SERIAL_XON_XOFF) #if ENABLED(SERIAL_XON_XOFF)
if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) { if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT; xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
writeNoHandshake(XON_CHAR); writeNoHandshake(XON_CHAR);
} }
#endif #endif
} }
#if TX_BUFFER_SIZE > 0 #if TX_BUFFER_SIZE > 0
uint8_t MarlinSerial::availableForWrite(void) { uint8_t MarlinSerial::availableForWrite(void) {
CRITICAL_SECTION_START; CRITICAL_SECTION_START;
const uint8_t h = tx_buffer.head, t = tx_buffer.tail; const uint8_t h = tx_buffer.head, t = tx_buffer.tail;

View file

@ -64,7 +64,7 @@
* G32 - Undock sled (Z_PROBE_SLED only) * G32 - Undock sled (Z_PROBE_SLED only)
* G33 - Delta Auto-Calibration (Requires DELTA_AUTO_CALIBRATION) * G33 - Delta Auto-Calibration (Requires DELTA_AUTO_CALIBRATION)
* G38 - Probe in any direction using the Z_MIN_PROBE (Requires G38_PROBE_TARGET) * G38 - Probe in any direction using the Z_MIN_PROBE (Requires G38_PROBE_TARGET)
* G42 - Coordinated move to a mesh point (Requires HAS_MESH) * G42 - Coordinated move to a mesh point (Requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BLINEAR, or AUTO_BED_LEVELING_UBL)
* G90 - Use Absolute Coordinates * G90 - Use Absolute Coordinates
* G91 - Use Relative Coordinates * G91 - Use Relative Coordinates
* G92 - Set current position to coordinates given * G92 - Set current position to coordinates given

View file

@ -54,13 +54,6 @@
#define SERVO2_PIN 24 // Motor header MX3 #define SERVO2_PIN 24 // Motor header MX3
#define SERVO3_PIN 5 // PWM header pin 5 #define SERVO3_PIN 5 // PWM header pin 5
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 30
#endif
// //
// Limit Switches // Limit Switches
// //
@ -71,6 +64,13 @@
#define Z_MIN_PIN 10 #define Z_MIN_PIN 10
#define Z_MAX_PIN 30 #define Z_MAX_PIN 30
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 30
#endif
// //
// Steppers // Steppers
// //