Fix and improve Creality configs
This commit is contained in:
parent
8190fdb260
commit
c68ce8667d
5 changed files with 229 additions and 63 deletions
|
@ -93,7 +93,7 @@
|
||||||
//#define SHOW_CUSTOM_BOOTSCREEN
|
//#define SHOW_CUSTOM_BOOTSCREEN
|
||||||
|
|
||||||
// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
|
// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
|
||||||
//#define CUSTOM_STATUS_SCREEN_IMAGE
|
#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||||
|
|
||||||
// @section machine
|
// @section machine
|
||||||
|
|
||||||
|
@ -428,7 +428,7 @@
|
||||||
// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH.
|
// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH.
|
||||||
// Note that for Bowden Extruders a too-small value here may prevent loading.
|
// Note that for Bowden Extruders a too-small value here may prevent loading.
|
||||||
#define PREVENT_LENGTHY_EXTRUDE
|
#define PREVENT_LENGTHY_EXTRUDE
|
||||||
#define EXTRUDE_MAXLENGTH 200
|
#define EXTRUDE_MAXLENGTH 435
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//======================== Thermal Runaway Protection =======================
|
//======================== Thermal Runaway Protection =======================
|
||||||
|
|
|
@ -392,7 +392,7 @@
|
||||||
// @section lcd
|
// @section lcd
|
||||||
|
|
||||||
#if ENABLED(ULTIPANEL)
|
#if ENABLED(ULTIPANEL)
|
||||||
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
|
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 1*60} // Feedrates (mm/m) for manual moves along X, Y, Z, E from panel
|
||||||
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
|
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -891,25 +891,25 @@
|
||||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||||
#define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract.
|
#define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract.
|
||||||
// This short retract is done immediately, before parking the nozzle.
|
// This short retract is done immediately, before parking the nozzle.
|
||||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
#define FILAMENT_CHANGE_UNLOAD_LENGTH 430 // (mm) The length of filament for a complete unload.
|
||||||
// For Bowden, the full length of the tube and nozzle.
|
// For Bowden, the full length of the tube and nozzle.
|
||||||
// For direct drive, the full length of the nozzle.
|
// For direct drive, the full length of the nozzle.
|
||||||
// Set to 0 for manual unloading.
|
// Set to 0 for manual unloading.
|
||||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
#define FILAMENT_CHANGE_LOAD_FEEDRATE 41 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
#define FILAMENT_CHANGE_LOAD_LENGTH 430 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||||
// For Bowden, the full length of the tube and nozzle.
|
// For Bowden, the full length of the tube and nozzle.
|
||||||
// For direct drive, the full length of the nozzle.
|
// For direct drive, the full length of the nozzle.
|
||||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 20 // (mm) Length to extrude after loading.
|
||||||
// Set to 0 for manual extrusion.
|
// Set to 0 for manual extrusion.
|
||||||
// Filament can be extruded repeatedly from the Filament Change menu
|
// Filament can be extruded repeatedly from the Filament Change menu
|
||||||
// until extrusion is consistent, and to purge old filament.
|
// until extrusion is consistent, and to purge old filament.
|
||||||
|
|
||||||
// Filament Unload does a Retract, Delay, and Purge first:
|
// Filament Unload does a Retract, Delay, and Purge first:
|
||||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 2 // (mm) Unload initial retract length.
|
#define FILAMENT_UNLOAD_RETRACT_LENGTH 4 // (mm) Unload initial retract length.
|
||||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
#define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged.
|
||||||
|
|
||||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||||
#define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed.
|
#define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed.
|
||||||
|
|
112
Marlin/src/config/examples/Creality/CR-10S/_Statusscreen.h
Normal file
112
Marlin/src/config/examples/Creality/CR-10S/_Statusscreen.h
Normal file
|
@ -0,0 +1,112 @@
|
||||||
|
#ifndef _STATUSSCREEN_H_
|
||||||
|
#define _STATUSSCREEN_H_
|
||||||
|
|
||||||
|
#define STATUS_SCREENWIDTH 128 // Width in pixels
|
||||||
|
|
||||||
|
#define STATUS_SCREEN_X 0
|
||||||
|
#define STATUS_SCREEN_HOTEND_TEXT_X(E) (38 + (E) * 20)
|
||||||
|
#define STATUS_SCREEN_FAN_TEXT_X 103
|
||||||
|
|
||||||
|
#include "MarlinConfig.h"
|
||||||
|
|
||||||
|
#if HOTENDS < 2
|
||||||
|
|
||||||
|
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||||
|
//-----"CR-10S 300"-----|-nozzle--|---------|-----bed------|----|-----fan------|
|
||||||
|
0x3D,0xF0,0x02,0x38,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
|
||||||
|
0x44,0x88,0x06,0x45,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
|
0x80,0x88,0x02,0x45,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
|
||||||
|
0x80,0xF0,0x02,0x44,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
|
||||||
|
0x80,0xA3,0xF2,0x44,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
|
||||||
|
0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
|
||||||
|
0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
|
||||||
|
0x44,0x88,0x02,0x45,0x10,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
|
||||||
|
0x39,0xCC,0x07,0x39,0xE0,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
|
||||||
|
0x00,0x38,0x70,0xE0,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
|
||||||
|
0x00,0x44,0x89,0x10,0x00,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2F,0x03,0xD0,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
|
||||||
|
0x00,0x18,0x89,0x10,0x00,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x27,0x87,0x90,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x33,0x87,0x30,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
|
0x00,0x44,0x89,0x10,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
|
||||||
|
0x00,0x38,0x70,0xE0,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
|
||||||
|
};
|
||||||
|
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||||
|
//-----"CR-10S 300"-----|-nozzle--|---------|-----bed------|----|-----fan------|
|
||||||
|
0x3D,0xF0,0x02,0x38,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
|
||||||
|
0x44,0x88,0x06,0x45,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
|
0x80,0x88,0x02,0x45,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
|
||||||
|
0x80,0xF0,0x02,0x44,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
|
||||||
|
0x80,0xA3,0xF2,0x44,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
|
||||||
|
0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
|
||||||
|
0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
|
||||||
|
0x44,0x88,0x02,0x45,0x10,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x2E,0x31,0xD0,
|
||||||
|
0x39,0xCC,0x07,0x39,0xE0,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x2F,0x7B,0xD0,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x2F,0x7B,0xD0,
|
||||||
|
0x00,0x38,0x70,0xE0,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2E,0x31,0xD0,
|
||||||
|
0x00,0x44,0x89,0x10,0x00,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2C,0x00,0xD0,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0x30,0x10,
|
||||||
|
0x00,0x18,0x89,0x10,0x00,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0x78,0x10,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x20,0xFC,0x10,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x30,0xFC,0x30,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
|
0x00,0x44,0x89,0x10,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
|
||||||
|
0x00,0x38,0x70,0xE0,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
|
||||||
|
};
|
||||||
|
|
||||||
|
#define STATUS_SCREEN_BED_TEXT_X 73
|
||||||
|
|
||||||
|
#else // HOTENDS >= 2
|
||||||
|
|
||||||
|
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||||
|
//-----"CR-10S 300"------|nozzle|----|nozzle|----|-----bed-----|------fan------|
|
||||||
|
0x3D,0xF0,0x02,0x38,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
|
||||||
|
0x44,0x88,0x06,0x45,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
|
0x80,0x88,0x02,0x45,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
|
||||||
|
0x80,0xF0,0x02,0x44,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
|
||||||
|
0x80,0xA3,0xF2,0x44,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
|
||||||
|
0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
|
||||||
|
0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
|
||||||
|
0x44,0x88,0x02,0x45,0x10,0x1F,0xE0,0x01,0xFE,0x00,0x08,0x20,0x80,0x20,0x30,0x10,
|
||||||
|
0x39,0xCC,0x07,0x39,0xE0,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x20,0x78,0x10,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x20,0x78,0x10,
|
||||||
|
0x00,0x38,0x70,0xE0,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x20,0x30,0x10,
|
||||||
|
0x00,0x44,0x89,0x10,0x00,0x1F,0xE0,0x01,0xFE,0x00,0x10,0x41,0x00,0x2F,0x03,0xD0,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x1F,0xE0,0x01,0xFE,0x00,0x20,0x82,0x00,0x2F,0x87,0xD0,
|
||||||
|
0x00,0x18,0x89,0x10,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x20,0x82,0x00,0x2F,0x87,0xD0,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x10,0x41,0x00,0x27,0x87,0x90,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x33,0x87,0x30,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x0F,0xC0,0x00,0xFC,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
|
0x00,0x44,0x89,0x10,0x00,0x07,0x80,0x00,0x78,0x00,0xFF,0xFF,0xC0,0x3F,0xFF,0xF0,
|
||||||
|
0x00,0x38,0x70,0xE0,0x00,0x03,0x00,0x00,0x30,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00
|
||||||
|
};
|
||||||
|
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||||
|
//-----"CR-10S 300"------|nozzle|----|nozzle|----|-----bed-----|------fan------|
|
||||||
|
0x3D,0xF0,0x02,0x38,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
|
||||||
|
0x44,0x88,0x06,0x45,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
|
0x80,0x88,0x02,0x45,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
|
||||||
|
0x80,0xF0,0x02,0x44,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
|
||||||
|
0x80,0xA3,0xF2,0x44,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
|
||||||
|
0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
|
||||||
|
0x80,0x90,0x02,0x44,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
|
||||||
|
0x44,0x88,0x02,0x45,0x10,0x1F,0xE0,0x01,0xFE,0x00,0x08,0x20,0x80,0x2E,0x31,0xD0,
|
||||||
|
0x39,0xCC,0x07,0x39,0xE0,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x2F,0x7B,0xD0,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x2F,0x7B,0xD0,
|
||||||
|
0x00,0x38,0x70,0xE0,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x2E,0x31,0xD0,
|
||||||
|
0x00,0x44,0x89,0x10,0x00,0x1F,0xE0,0x01,0xFE,0x00,0x10,0x41,0x00,0x2C,0x00,0xD0,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x1F,0xE0,0x01,0xFE,0x00,0x20,0x82,0x00,0x20,0x30,0x10,
|
||||||
|
0x00,0x18,0x89,0x10,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x20,0x82,0x00,0x20,0x78,0x10,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x10,0x41,0x00,0x20,0xFC,0x10,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x30,0xFC,0x30,
|
||||||
|
0x00,0x04,0x89,0x10,0x00,0x0F,0xC0,0x00,0xFC,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
|
0x00,0x44,0x89,0x10,0x00,0x07,0x80,0x00,0x78,0x00,0xFF,0xFF,0xC0,0x3F,0xFF,0xF0,
|
||||||
|
0x00,0x38,0x70,0xE0,0x00,0x03,0x00,0x00,0x30,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00
|
||||||
|
};
|
||||||
|
|
||||||
|
#define STATUS_SCREEN_BED_TEXT_X 81
|
||||||
|
|
||||||
|
#endif // HOTENDS >= 2
|
||||||
|
|
||||||
|
#endif // _STATUSSCREEN_H_
|
|
@ -93,11 +93,7 @@
|
||||||
#define SHOW_CUSTOM_BOOTSCREEN
|
#define SHOW_CUSTOM_BOOTSCREEN
|
||||||
|
|
||||||
// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
|
// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
|
||||||
//#define CUSTOM_STATUS_SCREEN_IMAGE
|
#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||||
|
|
||||||
// Set this to a file name (relative the ultralcd_impl_DOGM.h file) to read a
|
|
||||||
// customized status screen bitmap.
|
|
||||||
#define CUSTOM_STATUS_SCREEN_FILE "_Statusscreen.h"
|
|
||||||
|
|
||||||
// @section machine
|
// @section machine
|
||||||
|
|
||||||
|
|
|
@ -1,9 +1,18 @@
|
||||||
#ifndef STATUSSCREEN_H_
|
#ifndef _STATUSSCREEN_H_
|
||||||
#define STATUSSCREEN_H_
|
#define _STATUSSCREEN_H_
|
||||||
|
|
||||||
#define STATUS_SCREENWIDTH 128 // Width in pixels
|
#define STATUS_SCREENWIDTH 128 // Width in pixels
|
||||||
|
|
||||||
|
#define STATUS_SCREEN_X 0
|
||||||
|
#define STATUS_SCREEN_HOTEND_TEXT_X(E) (38 + (E) * 20)
|
||||||
|
#define STATUS_SCREEN_FAN_TEXT_X 103
|
||||||
|
|
||||||
|
#include "MarlinConfig.h"
|
||||||
|
|
||||||
|
#if HOTENDS < 2
|
||||||
|
|
||||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||||
|
//-------"ender"--------|-nozzle--|---------|-----bed------|----|-----fan------|
|
||||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
|
||||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
|
||||||
|
@ -25,6 +34,7 @@ const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||||
0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
|
0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
|
||||||
};
|
};
|
||||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||||
|
//-------"ender"--------|-nozzle--|---------|-----bed------|----|-----fan------|
|
||||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
|
||||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
|
||||||
|
@ -32,23 +42,71 @@ const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
|
||||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
|
||||||
0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
|
0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
|
||||||
0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
|
0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x2E,0x31,0xD0,
|
||||||
0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
|
0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x2F,0x7B,0xD0,
|
||||||
0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
|
0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x2F,0x7B,0xD0,
|
||||||
0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
|
0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2E,0x31,0xD0,
|
||||||
0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2C,0x00,0xD0,
|
0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2C,0x00,0xD0,
|
||||||
0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x30,0x10,
|
0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0x30,0x10,
|
||||||
0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x78,0x10,
|
0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0x78,0x10,
|
||||||
0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0xFC,0x10,
|
0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x20,0xFC,0x10,
|
||||||
0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x30,0xFC,0x30,
|
0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x30,0xFC,0x30,
|
||||||
0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
|
0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
|
||||||
0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
|
0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
|
||||||
};
|
};
|
||||||
|
|
||||||
#define STATUS_SCREEN_X 0
|
#define STATUS_SCREEN_BED_TEXT_X 73
|
||||||
#define STATUS_SCREEN_HOTEND_TEXT_X(i) (39 + (i) * 25)
|
|
||||||
#define STATUS_SCREEN_BED_TEXT_X 72
|
|
||||||
#define STATUS_SCREEN_FAN_TEXT_X 103
|
|
||||||
|
|
||||||
#endif // STATUSSCREEN_H_
|
#else // HOTENDS >= 2
|
||||||
|
|
||||||
|
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||||
|
//-------"ender"---------|nozzle|----|nozzle|----|-----bed-----|------fan------|
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
|
||||||
|
0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
|
||||||
|
0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x01,0xFE,0x00,0x08,0x20,0x80,0x20,0x30,0x10,
|
||||||
|
0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x20,0x78,0x10,
|
||||||
|
0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x20,0x78,0x10,
|
||||||
|
0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x20,0x30,0x10,
|
||||||
|
0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x01,0xFE,0x00,0x10,0x41,0x00,0x2F,0x03,0xD0,
|
||||||
|
0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x01,0xFE,0x00,0x20,0x82,0x00,0x2F,0x87,0xD0,
|
||||||
|
0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x03,0xFF,0x00,0x20,0x82,0x00,0x2F,0x87,0xD0,
|
||||||
|
0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x03,0xFF,0x00,0x10,0x41,0x00,0x27,0x87,0x90,
|
||||||
|
0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x33,0x87,0x30,
|
||||||
|
0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0xFC,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x78,0x00,0xFF,0xFF,0xC0,0x3F,0xFF,0xF0,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x30,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00
|
||||||
|
};
|
||||||
|
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||||
|
//-------"ender"---------|nozzle|----|nozzle|----|-----bed-----|------fan------|
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
|
||||||
|
0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
|
||||||
|
0xFE,0x00,0x02,0x00,0x00,0x1F,0xE0,0x01,0xFE,0x00,0x08,0x20,0x80,0x2E,0x31,0xD0,
|
||||||
|
0x42,0x00,0x02,0x00,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x2F,0x7B,0xD0,
|
||||||
|
0x48,0x00,0x02,0x00,0x00,0x3F,0xF0,0x03,0xFF,0x00,0x04,0x10,0x40,0x2F,0x7B,0xD0,
|
||||||
|
0x48,0xDC,0x3E,0x3C,0xEE,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x2E,0x31,0xD0,
|
||||||
|
0x78,0x62,0x42,0x42,0x32,0x1F,0xE0,0x01,0xFE,0x00,0x10,0x41,0x00,0x2C,0x00,0xD0,
|
||||||
|
0x48,0x42,0x42,0x42,0x20,0x1F,0xE0,0x01,0xFE,0x00,0x20,0x82,0x00,0x20,0x30,0x10,
|
||||||
|
0x48,0x42,0x42,0x7E,0x20,0x3F,0xF0,0x03,0xFF,0x00,0x20,0x82,0x00,0x20,0x78,0x10,
|
||||||
|
0x40,0x42,0x42,0x40,0x20,0x3F,0xF0,0x03,0xFF,0x00,0x10,0x41,0x00,0x20,0xFC,0x10,
|
||||||
|
0x42,0x42,0x46,0x42,0x20,0x3F,0xF0,0x03,0xFF,0x00,0x08,0x20,0x80,0x30,0xFC,0x30,
|
||||||
|
0xFE,0xE7,0x3B,0x3C,0xF8,0x0F,0xC0,0x00,0xFC,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x78,0x00,0xFF,0xFF,0xC0,0x3F,0xFF,0xF0,
|
||||||
|
0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x30,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00
|
||||||
|
};
|
||||||
|
|
||||||
|
#define STATUS_SCREEN_BED_TEXT_X 81
|
||||||
|
|
||||||
|
#endif // HOTENDS >= 2
|
||||||
|
|
||||||
|
#endif // _STATUSSCREEN_H_
|
||||||
|
|
Reference in a new issue