Merge pull request #172 from daid/Marlin_v1

Add M401 - Wait for user to press button on LCD (with optional timeout) minor fix in M115.
This commit is contained in:
Bernhard Kubicek 2012-06-02 03:44:03 -07:00
commit c7ce99d495
7 changed files with 67 additions and 13 deletions

View file

@ -109,6 +109,9 @@
//this prevents dangerous Extruder moves, i.e. if the temperature is under the limit
//can be software-disabled for whatever purposes by
#define PREVENT_DANGEROUS_EXTRUDE
//if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately.
#define PREVENT_LENGTHY_EXTRUDE
#define EXTRUDE_MINTEMP 170
#define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.

View file

@ -56,6 +56,8 @@
// G92 - Set current position to cordinates given
//RepRap M Codes
// M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled)
// M1 - Same as M0
// M104 - Set extruder target temp
// M105 - Read current temp
// M106 - Fan on
@ -596,6 +598,7 @@ void process_commands()
while(millis() < codenum ){
manage_heater();
manage_inactivity(1);
LCD_STATUS;
}
break;
case 28: //G28 Home all Axis one at a time
@ -707,6 +710,35 @@ void process_commands()
{
switch( (int)code_value() )
{
#ifdef ULTRA_LCD
case 0: // M0 - Unconditional stop - Wait for user button press on LCD
case 1: // M1 - Conditional stop - Wait for user button press on LCD
{
LCD_MESSAGEPGM(MSG_USERWAIT);
codenum = 0;
if(code_seen('P')) codenum = code_value(); // milliseconds to wait
if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
st_synchronize();
previous_millis_cmd = millis();
if (codenum > 0)
{
codenum += millis(); // keep track of when we started waiting
while(millis() < codenum && !CLICKED){
manage_heater();
manage_inactivity(1);
LCD_STATUS;
}
}else{
while(!CLICKED) {
manage_heater();
manage_inactivity(1);
LCD_STATUS;
}
}
}
break;
#endif
case 17:
LCD_MESSAGEPGM(MSG_NO_MOVE);
enable_x();
@ -1259,7 +1291,7 @@ void process_commands()
PID_autotune(temp);
}
break;
case 400: // finish all moves
case 400: // M400 finish all moves
{
st_synchronize();
}

View file

@ -10,11 +10,23 @@
#define LANGUAGE_CHOICE 1 // Pick your language from the list above
#define PROTOCOL_VERSION "1.0"
#if MOTHERBOARD == 7 || MOTHERBOARD == 71
#define MACHINE_NAME "Ultimaker"
#define FIRMWARE_URL "http://firmware.ultimaker.com"
#else
#define MACHINE_NAME "Mendel"
#define FIRMWARE_URL "http://www.mendel-parts.com"
#endif
#define STRINGIFY_(n) #n
#define STRINGIFY(n) STRINGIFY_(n)
#if LANGUAGE_CHOICE == 1
// LCD Menu Messages
#define WELCOME_MSG "Printer Ready."
#define WELCOME_MSG MACHINE_NAME " Ready."
#define MSG_SD_INSERTED "Card inserted"
#define MSG_SD_REMOVED "Card removed"
#define MSG_MAIN " Main \003"
@ -63,8 +75,8 @@
#define MSG_MAIN_WIDE " Main \003"
#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
#define MSG_MOTION_WIDE " Motion \x7E"
#define MSG_STORE_EPROM " Store EPROM"
#define MSG_LOAD_EPROM " Load EPROM"
#define MSG_STORE_EPROM " Store memory"
#define MSG_LOAD_EPROM " Load memory"
#define MSG_RESTORE_FAILSAFE " Restore Failsafe"
#define MSG_REFRESH "\004Refresh"
#define MSG_WATCH " Watch \003"
@ -76,11 +88,12 @@
#define MSG_CARD_MENU " Card Menu \x7E"
#define MSG_NO_CARD " No Card"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
#define MSG_DWELL "DWELL..."
#define MSG_DWELL "Sleep..."
#define MSG_USERWAIT "Wait for user..."
#define MSG_NO_MOVE "No move."
#define MSG_PART_RELEASE "Partial Release"
#define MSG_KILLED "KILLED. "
#define MSG_STOPPED "STOPPED. "
#define MSG_STOPPED "STOPPED. "
#define MSG_PREHEAT_PLA " Preheat PLA"
#define MSG_PREHEAT_ABS " Preheat ABS"
#define MSG_STEPPER_RELEASED "Released."
@ -94,7 +107,7 @@
#define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_WATCHDOG_RESET " Watchdog Reset"
#define MSG_SOFTWARE_RESET " Software Reset"
#define MSG_MARLIN "Marlin: "
#define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Author: "
#define MSG_CONFIGURATION_VER " Last Updated: "
#define MSG_FREE_MEMORY " Free Memory: "
@ -116,7 +129,7 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n"
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_COUNT_X " Count X:"
#define MSG_ERR_KILLED "Printer halted. kill() called !!"
#define MSG_ERR_STOPPED "Printer stopped deu to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)"
@ -157,7 +170,7 @@
// LCD Menu Messages
#define WELCOME_MSG "UltiMARLIN Ready."
#define WELCOME_MSG MACHINE_NAME " Ready."
#define MSG_SD_INSERTED "Card inserted"
#define MSG_SD_REMOVED "Card removed"
@ -173,7 +186,7 @@
#define MSG_PREHEAT_PLA " Preheat PLA"
#define MSG_PREHEAT_ABS " Preheat ABS"
#define MSG_MOVE_AXIS " Move Axis \x7E"
#define MSG_MOVE_AXIS " Achsen verfahren \x7E"
#define MSG_MOVE_AXIS " Achsen verfahren \x7E"
#define MSG_SPEED " Geschw:"
#define MSG_NOZZLE " \002Duese:"
#define MSG_NOZZLE1 " \002Duese2:"
@ -263,7 +276,7 @@
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n"
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_COUNT_X " Count X:"
#define MSG_ERR_KILLED "Printer halted. kill() called !!"
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"

View file

@ -684,7 +684,7 @@
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 51
#define E1_ENABLE_PIN 48
#define SDPOWER -1
#define SDSS 53

View file

@ -495,12 +495,14 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP);
}
#ifdef PREVENT_LENGTHY_EXTRUDE
if(labs(target[E_AXIS]-position[E_AXIS])>axis_steps_per_unit[E_AXIS]*EXTRUDE_MAXLENGTH)
{
position[E_AXIS]=target[E_AXIS]; //behave as if the move really took place, but ignore E part
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP);
}
#endif
#endif
// Prepare to set up new block

View file

@ -13,6 +13,7 @@
#define LCD_UPDATE_INTERVAL 100
#define STATUSTIMEOUT 15000
extern LiquidCrystal lcd;
extern volatile char buttons; //the last checked buttons in a bit array.
#ifdef NEWPANEL
#define EN_C (1<<BLEN_C)

View file

@ -1,3 +1,5 @@
#include "language.h"
#include "temperature.h"
#include "ultralcd.h"
#ifdef ULTRA_LCD
#include "Marlin.h"
@ -711,6 +713,7 @@ void MainMenu::showAxisMove()
}
break;
case ItemAM_E:
// ErikDB: TODO: this length should be changed for volumetric.
MENUITEM( lcdprintPGM(MSG_EXTRUDE) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E5");beepshort(); ) ;
break;
default: