diff --git a/Marlin/language.h b/Marlin/language.h index 2126f7fb5..356041237 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -17,6 +17,7 @@ // 8 Portuguese // 9 Finnish // 10 Aragonese +// 11 Dutch #ifndef LANGUAGE_CHOICE #define LANGUAGE_CHOICE 1 // Pick your language from the list above @@ -1918,4 +1919,185 @@ #endif +#if LANGUAGE_CHOICE == 11 //Dutch + +// LCD Menu Messages +// Please note these are limited to 17 characters! + + #define WELCOME_MSG MACHINE_NAME " gereed." + #define MSG_SD_INSERTED "Kaart ingestoken" + #define MSG_SD_REMOVED "Kaart verwijderd" + #define MSG_MAIN "Main" + #define MSG_AUTOSTART "Autostart" + #define MSG_DISABLE_STEPPERS "Motoren uit" + #define MSG_AUTO_HOME "Auto home" + #define MSG_SET_ORIGIN "Nulpunt instellen" + #define MSG_PREHEAT_PLA "PLA voorverwarmen" + #define MSG_PREHEAT_PLA_SETTINGS "PLA voorverw. conf" + #define MSG_PREHEAT_ABS "ABS voorverwarmen" + #define MSG_PREHEAT_ABS_SETTINGS "ABS voorverw. conf" + #define MSG_COOLDOWN "Afkoelen" + #define MSG_SWITCH_PS_ON "Stroom aan" + #define MSG_SWITCH_PS_OFF "Stroom uit" + #define MSG_EXTRUDE "Extrude" + #define MSG_RETRACT "Retract" + #define MSG_MOVE_AXIS "As verplaatsen" + #define MSG_MOVE_X "Verplaats X" + #define MSG_MOVE_Y "Verplaats Y" + #define MSG_MOVE_Z "Verplaats Z" + #define MSG_MOVE_E "Extruder" + #define MSG_MOVE_01MM "Verplaats 0.1mm" + #define MSG_MOVE_1MM "Verplaats 1mm" + #define MSG_MOVE_10MM "Verplaats 10mm" + #define MSG_SPEED "Snelheid" + #define MSG_NOZZLE "Nozzle" + #define MSG_NOZZLE1 "Nozzle2" + #define MSG_NOZZLE2 "Nozzle3" + #define MSG_BED "Bed" + #define MSG_FAN_SPEED "Fan snelheid" + #define MSG_FLOW "Flow" + #define MSG_CONTROL "Control" + #define MSG_MIN " \002 Min" + #define MSG_MAX " \002 Max" + #define MSG_FACTOR " \002 Fact" + #define MSG_AUTOTEMP "Autotemp" + #define MSG_ON "Aan " + #define MSG_OFF "Uit" + #define MSG_PID_P "PID-P" + #define MSG_PID_I "PID-I" + #define MSG_PID_D "PID-D" + #define MSG_PID_C "PID-C" + #define MSG_ACC "Versn" + #define MSG_VXY_JERK "Vxy-jerk" + #define MSG_VZ_JERK "Vz-jerk" + #define MSG_VE_JERK "Ve-jerk" + #define MSG_VMAX "Vmax " + #define MSG_X "x" + #define MSG_Y "y" + #define MSG_Z "z" + #define MSG_E "e" + #define MSG_VMIN "Vmin" + #define MSG_VTRAV_MIN "VTrav min" + #define MSG_AMAX "Amax " + #define MSG_A_RETRACT "A-retract" + #define MSG_XSTEPS "Xsteps/mm" + #define MSG_YSTEPS "Ysteps/mm" + #define MSG_ZSTEPS "Zsteps/mm" + #define MSG_ESTEPS "Esteps/mm" + #define MSG_RECTRACT "Rectract" + #define MSG_TEMPERATURE "Temperatuur" + #define MSG_MOTION "Beweging" + #define MSG_CONTRAST "LCD contrast" + #define MSG_STORE_EPROM "Geheugen opslaan" + #define MSG_LOAD_EPROM "Geheugen laden" + #define MSG_RESTORE_FAILSAFE "Noodstop reset" + #define MSG_REFRESH "Ververs" + #define MSG_WATCH "Info scherm" + #define MSG_PREPARE "Voorbereiden" + #define MSG_TUNE "Afstellen" + #define MSG_PAUSE_PRINT "Print pauzeren" + #define MSG_RESUME_PRINT "Print hervatten" + #define MSG_STOP_PRINT "Print stoppen" + #define MSG_CARD_MENU "Print van SD" + #define MSG_NO_CARD "Geen SD kaart" + #define MSG_DWELL "Slapen..." + #define MSG_USERWAIT "Wachten..." + #define MSG_RESUMING "Print hervatten" + #define MSG_NO_MOVE "Geen beweging." + #define MSG_KILLED "AFGEBROKEN. " + #define MSG_STOPPED "GESTOPT. " + #define MSG_CONTROL_RETRACT "Retract mm" + #define MSG_CONTROL_RETRACTF "Retract F" + #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" + #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" + #define MSG_AUTORETRACT "AutoRetr." + #define MSG_FILAMENTCHANGE "Verv. Filament" + #define MSG_INIT_SDCARD "Init. SD kaart" + #define MSG_CNG_SDCARD "Verv. SD card" + #define MSG_ZPROBE_OUT "Z probe uit. bed" + #define MSG_POSITION_UNKNOWN "Home X/Y voor Z" + #define MSG_ZPROBE_ZOFFSET "Z Offset" + #define MSG_BABYSTEP_X "Babystap X" + #define MSG_BABYSTEP_Y "Babystap Y" + #define MSG_BABYSTEP_Z "Babystap Z" + #define MSG_ENDSTOP_ABORT "Endstop afbr." + +// Serial Console Messages + + #define MSG_Enqueing "enqueing \"" + #define MSG_POWERUP "Opstarten" + #define MSG_EXTERNAL_RESET " Externe Reset" + #define MSG_BROWNOUT_RESET " Lage voedingsspanning Reset" + #define MSG_WATCHDOG_RESET " Watchdog Reset" + #define MSG_SOFTWARE_RESET " Software Reset" + #define MSG_AUTHOR " | Auteur: " + #define MSG_CONFIGURATION_VER " Laatst bijgewerkt: " + #define MSG_FREE_MEMORY " Vrij Geheugen: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Bestand opslaan voltooid." + #define MSG_ERR_LINE_NO "Regelnummer is niet het laatste regelnummer+1, Laatste regel: " + #define MSG_ERR_CHECKSUM_MISMATCH "Checksum fout, Laatste regel: " + #define MSG_ERR_NO_CHECKSUM "Regel zonder checksum, Laatste regel: " + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Geen regelnummer met checksum, Laatste regel: " + #define MSG_FILE_PRINTED "Bestand afdrukken klaar" + #define MSG_BEGIN_FILE_LIST "Begin bestandslijst" + #define MSG_END_FILE_LIST "Einde bestandslijst" + #define MSG_M104_INVALID_EXTRUDER "M104 Ongeldige extruder " + #define MSG_M105_INVALID_EXTRUDER "M105 Ongeldige extruder " + #define MSG_M200_INVALID_EXTRUDER "M200 Ongeldige extruder " + #define MSG_M218_INVALID_EXTRUDER "M218 Ongeldige extruder " + #define MSG_ERR_NO_THERMISTORS "Geen thermistors - geen temperatuur" + #define MSG_M109_INVALID_EXTRUDER "M109 Ongeldige extruder " + #define MSG_HEATING "Opwarmen..." + #define MSG_HEATING_COMPLETE "Opwarmen klaar." + #define MSG_BED_HEATING "Bed opwarmen." + #define MSG_BED_DONE "Bed klaar." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup voor gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" + #define MSG_COUNT_X " Aantal X: " + #define MSG_ERR_KILLED "Printer stopgezet. kill() aangeroepen!" + #define MSG_ERR_STOPPED "Printer gestopt vanwege fouten. Los de fout op en gebruik M999 om opnieuw te starten. (Temperatuur is gereset, stel deze opnieuw in na herstart)" + #define MSG_RESEND "Opnieuw sturen: " + #define MSG_UNKNOWN_COMMAND "Onbekend commando: \"" + #define MSG_ACTIVE_EXTRUDER "Actieve Extruder: " + #define MSG_INVALID_EXTRUDER "Ongeldige extruder" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Eindstop statusrapportage:" + #define MSG_ENDSTOP_HIT "GERAAKT" + #define MSG_ENDSTOP_OPEN "open" + #define MSG_HOTEND_OFFSET "Hotend afwijking:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Kan subdirectory niet openen" + #define MSG_SD_INIT_FAIL "SD initialiseren mislukt" + #define MSG_SD_VOL_INIT_FAIL "volume.init mislukt" + #define MSG_SD_OPENROOT_FAIL "openRoot mislukt" + #define MSG_SD_CARD_OK "SD kaart ok" + #define MSG_SD_WORKDIR_FAIL "workDir openen mislukt" + #define MSG_SD_OPEN_FILE_FAIL "Openen mislukt, bestand: " + #define MSG_SD_FILE_OPENED "Bestand geopend: " + #define MSG_SD_SIZE " Grootte: " + #define MSG_SD_FILE_SELECTED "Bestanden geselecteerd:" + #define MSG_SD_WRITE_TO_FILE "Schrijven naar bestand: " + #define MSG_SD_PRINTING_BYTE "SD printen byte: " + #define MSG_SD_NOT_PRINTING "Niet SD printen" + #define MSG_SD_ERR_WRITE_TO_FILE "Fout tijdens het schrijven naar bestand:" + #define MSG_SD_CANT_ENTER_SUBDIR "Kan subdirectory niet in: " + + #define MSG_STEPPER_TOO_HIGH "stapsnelheid te hoog:" + #define MSG_ENDSTOPS_HIT "endstops geraakt: " + #define MSG_ERR_COLD_EXTRUDE_STOP " Koude extrusie voorkomen" + #define MSG_ERR_LONG_EXTRUDE_STOP " te lange extrusie voorkomen" + #define MSG_BABYSTEPPING_X "Babystepping X" + #define MSG_BABYSTEPPING_Y "Babystepping Y" + #define MSG_BABYSTEPPING_Z "Babystepping Z" + #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fout in menustructuur" + +#endif + #endif // ifndef LANGUAGE_H