From cfc5e96b4b316683391c7acae5b298a59fc7cba2 Mon Sep 17 00:00:00 2001 From: Ludy Date: Thu, 27 Dec 2018 22:29:39 +0100 Subject: [PATCH] Move JD to Config.h (and fix jerk->eeprom bug) (#12720) --- Marlin/Configuration.h | 19 ++++++++--- Marlin/Configuration_adv.h | 8 ----- Marlin/src/config/default/Configuration.h | 19 ++++++++--- Marlin/src/config/default/Configuration_adv.h | 8 ----- .../AlephObjects/TAZ4/Configuration.h | 19 ++++++++--- .../AlephObjects/TAZ4/Configuration_adv.h | 8 ----- .../AliExpress/CL-260/Configuration.h | 19 ++++++++--- .../config/examples/Anet/A2/Configuration.h | 19 ++++++++--- .../examples/Anet/A2/Configuration_adv.h | 8 ----- .../examples/Anet/A2plus/Configuration.h | 19 ++++++++--- .../examples/Anet/A2plus/Configuration_adv.h | 8 ----- .../config/examples/Anet/A6/Configuration.h | 18 ++++++++--- .../examples/Anet/A6/Configuration_adv.h | 8 ----- .../config/examples/Anet/A8/Configuration.h | 19 ++++++++--- .../examples/Anet/A8/Configuration_adv.h | 8 ----- .../src/config/examples/ArmEd/Configuration.h | 19 ++++++++--- .../config/examples/ArmEd/Configuration_adv.h | 8 ----- .../examples/Azteeg/X5GT/Configuration.h | 19 ++++++++--- .../BIBO/TouchX/cyclops/Configuration.h | 19 ++++++++--- .../BIBO/TouchX/cyclops/Configuration_adv.h | 8 ----- .../BIBO/TouchX/default/Configuration.h | 19 ++++++++--- .../BIBO/TouchX/default/Configuration_adv.h | 8 ----- .../examples/BQ/Hephestos/Configuration.h | 19 ++++++++--- .../examples/BQ/Hephestos/Configuration_adv.h | 8 ----- .../examples/BQ/Hephestos_2/Configuration.h | 19 ++++++++--- .../BQ/Hephestos_2/Configuration_adv.h | 8 ----- .../config/examples/BQ/WITBOX/Configuration.h | 19 ++++++++--- .../examples/BQ/WITBOX/Configuration_adv.h | 8 ----- .../config/examples/Cartesio/Configuration.h | 19 ++++++++--- .../examples/Cartesio/Configuration_adv.h | 8 ----- .../examples/Creality/CR-10/Configuration.h | 19 ++++++++--- .../Creality/CR-10/Configuration_adv.h | 8 ----- .../examples/Creality/CR-10S/Configuration.h | 19 ++++++++--- .../Creality/CR-10S/Configuration_adv.h | 8 ----- .../Creality/CR-10mini/Configuration.h | 19 ++++++++--- .../Creality/CR-10mini/Configuration_adv.h | 8 ----- .../examples/Creality/CR-8/Configuration.h | 19 ++++++++--- .../Creality/CR-8/Configuration_adv.h | 8 ----- .../examples/Creality/Ender-2/Configuration.h | 19 ++++++++--- .../Creality/Ender-2/Configuration_adv.h | 8 ----- .../examples/Creality/Ender-3/Configuration.h | 19 ++++++++--- .../Creality/Ender-3/Configuration_adv.h | 8 ----- .../examples/Creality/Ender-4/Configuration.h | 19 ++++++++--- .../Creality/Ender-4/Configuration_adv.h | 8 ----- .../examples/Einstart-S/Configuration.h | 19 ++++++++--- .../examples/Einstart-S/Configuration_adv.h | 8 ----- .../src/config/examples/Felix/Configuration.h | 19 ++++++++--- .../config/examples/Felix/Configuration_adv.h | 8 ----- .../examples/Felix/DUAL/Configuration.h | 19 ++++++++--- .../FolgerTech/i3-2020/Configuration.h | 19 ++++++++--- .../FolgerTech/i3-2020/Configuration_adv.h | 8 ----- .../examples/Formbot/Raptor/Configuration.h | 32 ++++++++++++------- .../Formbot/Raptor/Configuration_adv.h | 8 ----- .../examples/Formbot/T_Rex_2+/Configuration.h | 19 ++++++++--- .../Formbot/T_Rex_2+/Configuration_adv.h | 8 ----- .../examples/Formbot/T_Rex_3/Configuration.h | 22 ++++++++----- .../Formbot/T_Rex_3/Configuration_adv.h | 8 ----- .../examples/Geeetech/GT2560/Configuration.h | 19 ++++++++--- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 19 ++++++++--- .../Geeetech/MeCreator2/Configuration.h | 19 ++++++++--- .../Geeetech/MeCreator2/Configuration_adv.h | 8 ----- .../Prusa i3 Pro B/bltouch/Configuration.h | 19 ++++++++--- .../Prusa i3 Pro B/noprobe/Configuration.h | 19 ++++++++--- .../Geeetech/Prusa i3 Pro C/Configuration.h | 19 ++++++++--- .../Prusa i3 Pro C/Configuration_adv.h | 8 ----- .../Geeetech/Prusa i3 Pro W/Configuration.h | 19 ++++++++--- .../Prusa i3 Pro W/Configuration_adv.h | 8 ----- .../examples/Infitary/i3-M508/Configuration.h | 19 ++++++++--- .../Infitary/i3-M508/Configuration_adv.h | 8 ----- .../examples/JGAurora/A5/Configuration.h | 19 ++++++++--- .../examples/JGAurora/A5/Configuration_adv.h | 8 ----- .../examples/MakerParts/Configuration.h | 19 ++++++++--- .../examples/MakerParts/Configuration_adv.h | 8 ----- .../examples/Malyan/M150/Configuration.h | 19 ++++++++--- .../examples/Malyan/M150/Configuration_adv.h | 8 ----- .../examples/Malyan/M200/Configuration.h | 19 ++++++++--- .../examples/Malyan/M200/Configuration_adv.h | 8 ----- .../Micromake/C1/basic/Configuration.h | 19 ++++++++--- .../Micromake/C1/enhanced/Configuration.h | 19 ++++++++--- .../Micromake/C1/enhanced/Configuration_adv.h | 8 ----- .../config/examples/Mks/Robin/Configuration.h | 19 ++++++++--- .../examples/Mks/Robin/Configuration_adv.h | 8 ----- .../config/examples/Mks/Sbase/Configuration.h | 19 ++++++++--- .../examples/Mks/Sbase/Configuration_adv.h | 8 ----- .../examples/RepRapPro/Huxley/Configuration.h | 19 ++++++++--- .../RepRapWorld/Megatronics/Configuration.h | 19 ++++++++--- .../config/examples/RigidBot/Configuration.h | 19 ++++++++--- .../examples/RigidBot/Configuration_adv.h | 8 ----- .../src/config/examples/SCARA/Configuration.h | 19 ++++++++--- .../config/examples/SCARA/Configuration_adv.h | 8 ----- .../config/examples/STM32F10/Configuration.h | 19 ++++++++--- .../config/examples/STM32F4/Configuration.h | 19 ++++++++--- .../examples/Sanguinololu/Configuration.h | 19 ++++++++--- .../examples/Sanguinololu/Configuration_adv.h | 8 ----- .../config/examples/TheBorg/Configuration.h | 19 ++++++++--- .../examples/TheBorg/Configuration_adv.h | 8 ----- .../config/examples/TinyBoy2/Configuration.h | 19 ++++++++--- .../examples/TinyBoy2/Configuration_adv.h | 8 ----- .../config/examples/Tronxy/X1/Configuration.h | 19 ++++++++--- .../examples/Tronxy/X3A/Configuration.h | 19 ++++++++--- .../examples/Tronxy/X3A/Configuration_adv.h | 8 ----- .../examples/Tronxy/X5S/Configuration.h | 19 ++++++++--- .../examples/Tronxy/XY100/Configuration.h | 19 ++++++++--- .../UltiMachine/Archim1/Configuration.h | 19 ++++++++--- .../UltiMachine/Archim1/Configuration_adv.h | 8 ----- .../UltiMachine/Archim2/Configuration.h | 19 ++++++++--- .../UltiMachine/Archim2/Configuration_adv.h | 8 ----- .../examples/Velleman/K8200/Configuration.h | 19 ++++++++--- .../Velleman/K8200/Configuration_adv.h | 8 ----- .../examples/Velleman/K8400/Configuration.h | 19 ++++++++--- .../Velleman/K8400/Configuration_adv.h | 8 ----- .../Velleman/K8400/Dual-head/Configuration.h | 19 ++++++++--- .../Wanhao/Duplicator 6/Configuration.h | 19 ++++++++--- .../Wanhao/Duplicator 6/Configuration_adv.h | 8 ----- .../examples/adafruit/ST7565/Configuration.h | 19 ++++++++--- .../delta/Anycubic/Kossel/Configuration.h | 19 ++++++++--- .../delta/Anycubic/Kossel/Configuration_adv.h | 8 ----- .../FLSUN/auto_calibrate/Configuration.h | 19 ++++++++--- .../FLSUN/auto_calibrate/Configuration_adv.h | 8 ----- .../delta/FLSUN/kossel/Configuration.h | 19 ++++++++--- .../delta/FLSUN/kossel/Configuration_adv.h | 8 ----- .../delta/FLSUN/kossel_mini/Configuration.h | 19 ++++++++--- .../FLSUN/kossel_mini/Configuration_adv.h | 8 ----- .../Geeetech/Rostock 301/Configuration.h | 19 ++++++++--- .../Geeetech/Rostock 301/Configuration_adv.h | 8 ----- .../delta/Hatchbox_Alpha/Configuration.h | 19 ++++++++--- .../examples/delta/MKS/SBASE/Configuration.h | 19 ++++++++--- .../delta/MKS/SBASE/Configuration_adv.h | 8 ----- .../delta/Tevo Little Monster/Configuration.h | 19 ++++++++--- .../Tevo Little Monster/Configuration_adv.h | 8 ----- .../examples/delta/generic/Configuration.h | 19 ++++++++--- .../delta/generic/Configuration_adv.h | 8 ----- .../delta/kossel_mini/Configuration.h | 19 ++++++++--- .../delta/kossel_mini/Configuration_adv.h | 8 ----- .../examples/delta/kossel_pro/Configuration.h | 19 ++++++++--- .../examples/delta/kossel_xl/Configuration.h | 19 ++++++++--- .../delta/kossel_xl/Configuration_adv.h | 8 ----- .../examples/gCreate/gMax1.5+/Configuration.h | 19 ++++++++--- .../gCreate/gMax1.5+/Configuration_adv.h | 8 ----- .../config/examples/makibox/Configuration.h | 19 ++++++++--- .../examples/makibox/Configuration_adv.h | 8 ----- .../examples/stm32f103ret6/Configuration.h | 19 ++++++++--- .../examples/tvrrug/Round2/Configuration.h | 19 ++++++++--- .../tvrrug/Round2/Configuration_adv.h | 8 ----- .../src/config/examples/wt150/Configuration.h | 19 ++++++++--- .../config/examples/wt150/Configuration_adv.h | 8 ----- Marlin/src/inc/SanityCheck.h | 2 +- Marlin/src/module/configuration_store.cpp | 3 -- 148 files changed, 1250 insertions(+), 851 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 5918c9d49..64bc3af49 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index e0f419ad4..069cf7c2f 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h index 5918c9d49..64bc3af49 100644 --- a/Marlin/src/config/default/Configuration.h +++ b/Marlin/src/config/default/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h index 1d33ce7a0..d3a8b7e13 100755 --- a/Marlin/src/config/default/Configuration_adv.h +++ b/Marlin/src/config/default/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h index 8be726a13..efc6114de 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h @@ -689,6 +689,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -697,10 +705,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 8.0 -#define DEFAULT_YJERK 8.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 10.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 10.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 6a645ce4d..4b142a27d 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h index 9fd004d0f..cd593c0ce 100644 --- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h +++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Anet/A2/Configuration.h b/Marlin/src/config/examples/Anet/A2/Configuration.h index 0cc52a2c5..21fd9eda5 100644 --- a/Marlin/src/config/examples/Anet/A2/Configuration.h +++ b/Marlin/src/config/examples/Anet/A2/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h index 5a59d354e..ce47b0b8e 100644 --- a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration.h b/Marlin/src/config/examples/Anet/A2plus/Configuration.h index 7d50ba4af..d62c63cd7 100644 --- a/Marlin/src/config/examples/Anet/A2plus/Configuration.h +++ b/Marlin/src/config/examples/Anet/A2plus/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h index 5a59d354e..ce47b0b8e 100644 --- a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h index 8d1b8d3e7..c515d6373 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration.h @@ -714,6 +714,13 @@ //#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts //#define DEFAULT_TRAVEL_ACCELERATION 4000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif /** * Default Jerk (mm/s) @@ -725,10 +732,13 @@ */ // ANET A6 Firmware V2.0 defaults (jerk): // Vxy-jerk: 10, Vz-jerk: +000.30, Ve-jerk: 5 -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h index b5cc0134a..90eaeb65b 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h @@ -481,14 +481,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h index d1acc0b25..54334e6fa 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration.h @@ -682,6 +682,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -690,10 +698,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h index 740cda6a3..93cd2d04f 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/ArmEd/Configuration.h b/Marlin/src/config/examples/ArmEd/Configuration.h index ed4d02a7f..fd47c1c26 100644 --- a/Marlin/src/config/examples/ArmEd/Configuration.h +++ b/Marlin/src/config/examples/ArmEd/Configuration.h @@ -681,6 +681,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -689,10 +697,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 8.0 -#define DEFAULT_YJERK 8.0 -#define DEFAULT_ZJERK 0.4 -#define DEFAULT_EJERK 1.5 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 + #define DEFAULT_ZJERK 0.4 +#endif + +#define DEFAULT_EJERK 1.5 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/ArmEd/Configuration_adv.h b/Marlin/src/config/examples/ArmEd/Configuration_adv.h index 3415a94d3..bf20b3c38 100644 --- a/Marlin/src/config/examples/ArmEd/Configuration_adv.h +++ b/Marlin/src/config/examples/ArmEd/Configuration_adv.h @@ -465,14 +465,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h index 21ea362b5..1fdecd8f0 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h index d42c34ca4..4bd815c40 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 7.0 -#define DEFAULT_YJERK 7.0 -#define DEFAULT_ZJERK 0.65 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 7.0 + #define DEFAULT_YJERK 7.0 + #define DEFAULT_ZJERK 0.65 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 3496e1ad5..477d4b56b 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -481,14 +481,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h index 729b064f7..55c7c0b05 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 7.0 -#define DEFAULT_YJERK 7.0 -#define DEFAULT_ZJERK 0.65 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 7.0 + #define DEFAULT_YJERK 7.0 + #define DEFAULT_ZJERK 0.65 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h index d7db91455..8d0f1d7ba 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h index f03ca8e0f..043f1cb92 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h @@ -657,6 +657,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -665,10 +673,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h index bf832e5a8..8789e3ae3 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h index 8f6adfded..db2583122 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h @@ -670,6 +670,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1300 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -678,10 +686,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 5.0 -#define DEFAULT_YJERK 5.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 10.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 5.0 + #define DEFAULT_YJERK 5.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 10.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h index 6be41ec3a..59d759332 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h index 84b074cdb..1c6a1c41a 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h @@ -657,6 +657,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -665,10 +673,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h index bf832e5a8..8789e3ae3 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h index 07f305765..0ad247cec 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration.h +++ b/Marlin/src/config/examples/Cartesio/Configuration.h @@ -668,6 +668,14 @@ #define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -676,10 +684,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h index efe803d18..6ee38ac6e 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h +++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h index 74431e9d3..f6e9d284c 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h @@ -679,6 +679,14 @@ #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -687,10 +695,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 2.7 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 2.7 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h index 2376abdf6..5311c1b35 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h index d600a111c..a2f73b252 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.4 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.4 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h index 7042b8638..7dcc305a0 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h index e14759827..a5439ffb3 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h @@ -688,6 +688,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -696,10 +704,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h index ef8ec2f8b..238764c54 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration.h b/Marlin/src/config/examples/Creality/CR-8/Configuration.h index 7d4b753ad..2c5588dc3 100644 --- a/Marlin/src/config/examples/Creality/CR-8/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-8/Configuration.h @@ -679,6 +679,14 @@ #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -687,10 +695,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 20.0 -#define DEFAULT_YJERK 20.0 -#define DEFAULT_ZJERK 0.4 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.4 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h index 06731bbaf..6124d42a6 100644 --- a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h index 9e5c4564c..746b93b42 100644 --- a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h @@ -673,6 +673,14 @@ #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -681,10 +689,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h index d737ba538..8bdd811e1 100644 --- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h index 519d9e9da..6606686c2 100644 --- a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h @@ -673,6 +673,14 @@ #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -681,10 +689,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h index 56089712c..47a4ff6ac 100644 --- a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h index 911f54cb3..e81e648af 100644 --- a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h @@ -679,6 +679,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -687,10 +695,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 20.0 -#define DEFAULT_YJERK 20.0 -#define DEFAULT_ZJERK 2.4 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 2.4 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h index aff2c0a1d..eb6b0d832 100644 --- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Einstart-S/Configuration.h b/Marlin/src/config/examples/Einstart-S/Configuration.h index 48c4c0f9c..470d8dbdc 100644 --- a/Marlin/src/config/examples/Einstart-S/Configuration.h +++ b/Marlin/src/config/examples/Einstart-S/Configuration.h @@ -681,6 +681,14 @@ #define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -689,10 +697,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h index 3017436bd..a6263f6db 100644 --- a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h +++ b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h index f73d288cc..a36406bc4 100644 --- a/Marlin/src/config/examples/Felix/Configuration.h +++ b/Marlin/src/config/examples/Felix/Configuration.h @@ -651,6 +651,14 @@ #define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -659,10 +667,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h index 3ab4dbaf1..357b7c1d3 100644 --- a/Marlin/src/config/examples/Felix/Configuration_adv.h +++ b/Marlin/src/config/examples/Felix/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h index 897cd0dd2..76e728cd8 100644 --- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h +++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h @@ -651,6 +651,14 @@ #define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -659,10 +667,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h index d47a07747..68d80dc4a 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h @@ -675,6 +675,14 @@ #define DEFAULT_RETRACT_ACCELERATION 400 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -683,10 +691,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 8.5 -#define DEFAULT_YJERK 8.5 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 4.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 8.5 + #define DEFAULT_YJERK 8.5 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 4.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h index beeb79a89..f9ee66130 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Formbot/Raptor/Configuration.h b/Marlin/src/config/examples/Formbot/Raptor/Configuration.h index 294f82d2e..3bf46ead5 100644 --- a/Marlin/src/config/examples/Formbot/Raptor/Configuration.h +++ b/Marlin/src/config/examples/Formbot/Raptor/Configuration.h @@ -744,6 +744,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -752,19 +760,21 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#if ENABLED(X_SpreadCycle) || DISABLED(X_2208) - #define DEFAULT_XJERK 20.0 -#else - #define DEFAULT_XJERK 10.0 +#if DISABLED(JUNCTION_DEVIATION) + #if ENABLED(X_SpreadCycle) || DISABLED(X_2208) + #define DEFAULT_XJERK 20.0 + #else + #define DEFAULT_XJERK 10.0 + #endif + #if ENABLED(Y_SpreadCycle) || DISABLED(Y_2208) + #define DEFAULT_YJERK 10.0 + #else + #define DEFAULT_YJERK 5.0 + #endif + #define DEFAULT_ZJERK 0.4 #endif -#if ENABLED(Y_SpreadCycle) || DISABLED(Y_2208) - #define DEFAULT_YJERK 10.0 -#else - #define DEFAULT_YJERK 5.0 -#endif -#define DEFAULT_ZJERK 0.4 -#define DEFAULT_EJERK 5.0 +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h index 6dc45d0b9..641f57b43 100644 --- a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h index b5c3bd84b..8f0dd3c75 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -698,6 +698,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -706,10 +714,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 12.0 // More conservitive numbers. -#define DEFAULT_YJERK 8.0 -#define DEFAULT_ZJERK 0.4 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 12.0 // More conservative numbers. + #define DEFAULT_YJERK 8.0 + #define DEFAULT_ZJERK 0.4 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 1856c14c7..144947b19 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -486,14 +486,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h index 90b1812a5..d513d253b 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h @@ -685,6 +685,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -693,15 +701,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define DEFAULT_XJERK 20.0 -//#define DEFAULT_YJERK 10.0 -//#define DEFAULT_ZJERK 0.4 -//#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 12.0 // More conservative numbers. + #define DEFAULT_YJERK 8.0 + #define DEFAULT_ZJERK 0.4 +#endif -#define DEFAULT_XJERK 12.0 // More conservitive numbers. -#define DEFAULT_YJERK 8.0 -#define DEFAULT_ZJERK 0.4 -#define DEFAULT_EJERK 5.0 +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 7e285aa2b..a714ffdb9 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -487,14 +487,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h index 56660dc45..de14fd4a9 100644 --- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h @@ -684,6 +684,14 @@ #define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -692,10 +700,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 4.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index d0d9802fb..b751953df 100644 --- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 5.0 -#define DEFAULT_YJERK 5.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 4.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 5.0 + #define DEFAULT_YJERK 5.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 4.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h index 76dc71f19..47e75b79d 100644 --- a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h @@ -676,6 +676,14 @@ #define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -684,10 +692,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 0 -#define DEFAULT_YJERK 0 -#define DEFAULT_ZJERK 0.6 -#define DEFAULT_EJERK 50.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 0 + #define DEFAULT_YJERK 0 + #define DEFAULT_ZJERK 0.6 +#endif + +#define DEFAULT_EJERK 50.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h index f7a0e4c9b..a49c4978f 100644 --- a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.01 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 6654b1ea3..bb28d3e0a 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -684,6 +684,14 @@ #define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -692,10 +700,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 1300fad17..093e15470 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -684,6 +684,14 @@ #define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -692,10 +700,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index c465d0caa..54bbf36a2 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 9160f8f9b..0d4b9ad4b 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 7ceba9c2c..f40833eb2 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 9160f8f9b..0d4b9ad4b 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h index 3629d72cf..33c2ecddb 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h @@ -673,6 +673,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -681,10 +689,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h index e80e313ff..53cf090fa 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h index 2bb97bb77..f837e9aba 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h @@ -681,6 +681,14 @@ #define DEFAULT_RETRACT_ACCELERATION 800 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -689,10 +697,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 8.0 -#define DEFAULT_YJERK 3.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 3.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h index d8ff9c124..d43e13ee8 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h index 74049467a..86bda597a 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration.h +++ b/Marlin/src/config/examples/MakerParts/Configuration.h @@ -689,6 +689,14 @@ #define DEFAULT_RETRACT_ACCELERATION 100 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION MAX_XYAXIS_ACCEL // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -697,10 +705,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 2.0 -#define DEFAULT_YJERK 2.0 -#define DEFAULT_ZJERK 0.4 -#define DEFAULT_EJERK 8.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 2.0 + #define DEFAULT_YJERK 2.0 + #define DEFAULT_ZJERK 0.4 +#endif + +#define DEFAULT_EJERK 8.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h index 8132279bb..77961af27 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h +++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h index 00868a2d9..91b3699da 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h @@ -689,6 +689,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 700 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -697,10 +705,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 8.0 -#define DEFAULT_YJERK 8.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h index 3283e7e48..bda98a32d 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h index d7d7e8fff..9d9eb7516 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h @@ -668,6 +668,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -676,10 +684,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h index 4e67ed124..ac55194dc 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h index e653a654b..b900e0f1b 100644 --- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h @@ -673,6 +673,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -681,10 +689,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK DEFAULT_XJERK -#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h index 438adecb7..5b7bd81ac 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h @@ -673,6 +673,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -681,10 +689,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK DEFAULT_XJERK -#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h index dec37290d..07144ea01 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Mks/Robin/Configuration.h b/Marlin/src/config/examples/Mks/Robin/Configuration.h index c995d255f..b2a779925 100644 --- a/Marlin/src/config/examples/Mks/Robin/Configuration.h +++ b/Marlin/src/config/examples/Mks/Robin/Configuration.h @@ -670,6 +670,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -678,10 +686,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h b/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h index e0f419ad4..069cf7c2f 100644 --- a/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h index df3cd4964..93dfd6742 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h index a2859e4d2..855aaed35 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h index c2a7f4267..f03021f94 100644 --- a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h +++ b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h @@ -709,6 +709,14 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -717,10 +725,13 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h index 23544ec3f..16ec881a7 100644 --- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h index de2cf9fae..6eec313e7 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration.h +++ b/Marlin/src/config/examples/RigidBot/Configuration.h @@ -667,6 +667,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -675,10 +683,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 8.0 -#define DEFAULT_YJERK 8.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h index b13e4d5f5..67eaaa255 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h +++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h index dd2068eda..3e9ff3e44 100644 --- a/Marlin/src/config/examples/SCARA/Configuration.h +++ b/Marlin/src/config/examples/SCARA/Configuration.h @@ -682,6 +682,14 @@ #define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -690,10 +698,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 5.0 -#define DEFAULT_YJERK 5.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 3.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 5.0 + #define DEFAULT_YJERK 5.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 3.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h index 533a03255..6df560333 100644 --- a/Marlin/src/config/examples/SCARA/Configuration_adv.h +++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h index 49bd6c1f6..f8f337aad 100644 --- a/Marlin/src/config/examples/STM32F10/Configuration.h +++ b/Marlin/src/config/examples/STM32F10/Configuration.h @@ -671,6 +671,14 @@ #define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -679,10 +687,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 13.0 -#define DEFAULT_YJERK 13.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 13.0 + #define DEFAULT_YJERK 13.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/STM32F4/Configuration.h b/Marlin/src/config/examples/STM32F4/Configuration.h index 616cb48e4..2bef5cf6f 100644 --- a/Marlin/src/config/examples/STM32F4/Configuration.h +++ b/Marlin/src/config/examples/STM32F4/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h index 7c1158f30..39421421d 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h @@ -700,6 +700,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -708,10 +716,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h index b3a18db96..72883bd44 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h index b4d09dcae..46c6a453c 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration.h +++ b/Marlin/src/config/examples/TheBorg/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h index cffee73c3..cfd5bb8f1 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h +++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h index ac756ecbd..8a25bcfb2 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h @@ -720,6 +720,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -728,10 +736,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h index 9cc0a0883..72d1a35b4 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h index 086acb9a8..7c6345a03 100644 --- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 20.0 -#define DEFAULT_YJERK 20.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 20.0 + #define DEFAULT_YJERK 20.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration.h index 6f1b81cac..ee90f7829 100644 --- a/Marlin/src/config/examples/Tronxy/X3A/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 15.0 -#define DEFAULT_YJERK 15.0 -#define DEFAULT_ZJERK 0.4 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 15.0 + #define DEFAULT_YJERK 15.0 + #define DEFAULT_ZJERK 0.4 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h index 33bcfb728..29745a5f6 100644 --- a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h index 445944606..399578938 100644 --- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 18.0 -#define DEFAULT_YJERK 18.0 -#define DEFAULT_ZJERK 0.4 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 18.0 + #define DEFAULT_YJERK 18.0 + #define DEFAULT_ZJERK 0.4 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h index 74e00f88a..c6b306e17 100644 --- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h @@ -680,6 +680,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -688,10 +696,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 20.0 -#define DEFAULT_YJERK 20.0 -#define DEFAULT_ZJERK 0.4 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 20.0 + #define DEFAULT_YJERK 20.0 + #define DEFAULT_ZJERK 0.4 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration.h index 229fcc660..9aed1aa47 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration.h +++ b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h index 4b8e4db8f..5f473dfd6 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h index 9f4638c88..9a7f3cc8a 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h index e05b446eb..b13e0c288 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h index d3c7dcbfc..08e1af303 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h @@ -698,6 +698,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -706,10 +714,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h index 3d212e3e0..7223a99a9 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h @@ -495,14 +495,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h index 3a6bd9ff9..952a706dc 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 6000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.5 -#define DEFAULT_EJERK 20.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.5 +#endif + +#define DEFAULT_EJERK 20.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h index 954356229..06c5bd7a0 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h index 6846ace54..ee9387be8 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 6000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.4 -#define DEFAULT_EJERK 20.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h index 398f678ae..2578afeb0 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -679,6 +679,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -687,10 +695,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 1.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 1.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 3338b1ccb..ddbb86c8e 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h index bb66fe5f7..e982b8bb8 100644 --- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h +++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h @@ -669,6 +669,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -677,10 +685,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h index 213d6a2e3..1073c7246 100644 --- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -799,6 +799,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -807,10 +815,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 5.0 -#define DEFAULT_YJERK DEFAULT_XJERK -#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta -#define DEFAULT_EJERK DEFAULT_XJERK +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 5.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 9bf661bf1..677bce09b 100644 --- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -484,14 +484,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index f0054b1fe..786bdcbb3 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -751,6 +751,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -759,10 +767,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK DEFAULT_XJERK -#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 6595ac6dd..ae859f7b7 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -484,14 +484,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h index aa571abef..e311b0091 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h @@ -751,6 +751,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -759,10 +767,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK DEFAULT_XJERK -#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 6595ac6dd..ae859f7b7 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -484,14 +484,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 818410805..41665a043 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -751,6 +751,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -759,10 +767,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK DEFAULT_XJERK -#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index d18304297..f39ea3c6b 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -484,14 +484,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration.h index f679f0c47..937788974 100644 --- a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -752,6 +752,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -760,10 +768,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK DEFAULT_XJERK -#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 4131c9111..a98368d1b 100644 --- a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -484,14 +484,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h index 951752caa..77218cf86 100644 --- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -756,6 +756,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -764,10 +772,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 20.0 -#define DEFAULT_YJERK DEFAULT_XJERK -#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 20.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration.h b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration.h index 4c0364521..b04372121 100644 --- a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration.h +++ b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration.h @@ -741,6 +741,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -749,10 +757,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK DEFAULT_XJERK -#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h index dfcc0e750..95c1957f3 100644 --- a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -484,14 +484,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration.h b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration.h index c4c8715c5..27dfc1eb9 100644 --- a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration.h @@ -745,6 +745,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 5000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -753,10 +761,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK DEFAULT_XJERK -#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h index b6bef1765..823683ac5 100644 --- a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -484,14 +484,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h index 740cb8bf1..1e664110d 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration.h +++ b/Marlin/src/config/examples/delta/generic/Configuration.h @@ -741,6 +741,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -749,10 +757,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK DEFAULT_XJERK -#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h index d18304297..f39ea3c6b 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h @@ -484,14 +484,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h index d800b246e..5244dd1ce 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h @@ -741,6 +741,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -749,10 +757,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK DEFAULT_XJERK -#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h index d18304297..f39ea3c6b 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h @@ -484,14 +484,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h index a6178a469..8430b8e8d 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h @@ -734,6 +734,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -742,10 +750,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK DEFAULT_XJERK -#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h index b4703f7f5..2309850be 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h @@ -744,6 +744,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -752,10 +760,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK DEFAULT_XJERK -#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta -#define DEFAULT_EJERK 20.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#endif + +#define DEFAULT_EJERK 20.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h index 8e8d7b3aa..f11464645 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h @@ -484,14 +484,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h index 7e9848fde..ccb17ee2b 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h @@ -682,6 +682,14 @@ #define DEFAULT_RETRACT_ACCELERATION 400 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -690,10 +698,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 8.5 -#define DEFAULT_YJERK 8.5 -#define DEFAULT_ZJERK 0.7 -#define DEFAULT_EJERK 4.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 8.5 + #define DEFAULT_YJERK 8.5 + #define DEFAULT_ZJERK 0.7 +#endif + +#define DEFAULT_EJERK 4.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 6cc356f76..4dfb897de 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h index 72c6d0131..e84b79819 100644 --- a/Marlin/src/config/examples/makibox/Configuration.h +++ b/Marlin/src/config/examples/makibox/Configuration.h @@ -672,6 +672,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -680,10 +688,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h index 26e8150a4..bbd647b59 100644 --- a/Marlin/src/config/examples/makibox/Configuration_adv.h +++ b/Marlin/src/config/examples/makibox/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h index 7d9f34322..8e875c112 100644 --- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h +++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h @@ -671,6 +671,14 @@ #define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -679,10 +687,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 13.0 -#define DEFAULT_YJERK 13.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 13.0 + #define DEFAULT_YJERK 13.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h index 94a610249..7b1576049 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h @@ -664,6 +664,14 @@ #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -672,10 +680,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 10.0 + #define DEFAULT_YJERK 10.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h index 85f916835..395007065 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h index b9477f154..a5cb70134 100644 --- a/Marlin/src/config/examples/wt150/Configuration.h +++ b/Marlin/src/config/examples/wt150/Configuration.h @@ -674,6 +674,14 @@ #define DEFAULT_RETRACT_ACCELERATION 1200 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 1200 // X, Y, Z acceleration for travel (non printing) moves +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + /** * Default Jerk (mm/s) * Override with M205 X Y Z E @@ -682,10 +690,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 8.0 -#define DEFAULT_YJERK 8.0 -#define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 5.0 +#if DISABLED(JUNCTION_DEVIATION) + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 + #define DEFAULT_ZJERK 0.3 +#endif + +#define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** * S-Curve Acceleration diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h index b6d7811b1..beb5a7b43 100644 --- a/Marlin/src/config/examples/wt150/Configuration_adv.h +++ b/Marlin/src/config/examples/wt150/Configuration_adv.h @@ -482,14 +482,6 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) -// -// Use Junction Deviation instead of traditional Jerk Limiting -// -//#define JUNCTION_DEVIATION -#if ENABLED(JUNCTION_DEVIATION) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - // // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 8869d99c8..eac085153 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -1121,7 +1121,7 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, #endif -#if HAS_MESH +#if HAS_MESH && DISABLED(JUNCTION_DEVIATION) static_assert(DEFAULT_ZJERK > 0.1, "Low DEFAULT_ZJERK values are incompatible with mesh-based leveling."); #elif ENABLED(G26_MESH_VALIDATION) #error "G26_MESH_VALIDATION requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_UBL." diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp index 9d7451588..5849c683c 100644 --- a/Marlin/src/module/configuration_store.cpp +++ b/Marlin/src/module/configuration_store.cpp @@ -487,9 +487,6 @@ void MarlinSettings::postprocess() { dummy = float(DEFAULT_EJERK); EEPROM_WRITE(dummy); #endif - #else - const float planner_max_jerk[XYZE] = { float(DEFAULT_XJERK), float(DEFAULT_YJERK), float(DEFAULT_ZJERK), float(DEFAULT_EJERK) }; - EEPROM_WRITE(planner_max_jerk); #endif #if ENABLED(JUNCTION_DEVIATION)