Merge pull request #8695 from thinkyhead/bf2_fixes_DEC6

[2.0.x] Cleanup, bugfixes, parity with 1.1.x
This commit is contained in:
Scott Lahteine 2017-12-06 22:22:35 -06:00 committed by GitHub
commit d163c4b530
Signed by: GitHub
GPG key ID: 4AEE18F83AFDEB23
15 changed files with 271 additions and 261 deletions

View file

@ -64,7 +64,7 @@
constexpr float unified_bed_leveling::_mesh_index_to_xpos[16], constexpr float unified_bed_leveling::_mesh_index_to_xpos[16],
unified_bed_leveling::_mesh_index_to_ypos[16]; unified_bed_leveling::_mesh_index_to_ypos[16];
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTIPANEL)
bool unified_bed_leveling::lcd_map_control = false; bool unified_bed_leveling::lcd_map_control = false;
#endif #endif

View file

@ -76,19 +76,23 @@ class unified_bed_leveling {
static int g29_grid_size; static int g29_grid_size;
#endif #endif
#if ENABLED(NEWPANEL)
static void move_z_with_encoder(const float &multiplier);
static float measure_point_with_encoder(); static float measure_point_with_encoder();
static float measure_business_card_thickness(float); static float measure_business_card_thickness(const float&);
static void manually_probe_remaining_mesh(const float&, const float&, const float&, const float&, const bool);
static void fine_tune_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map);
#endif
static bool g29_parameter_parsing(); static bool g29_parameter_parsing();
static void find_mean_mesh_height(); static void find_mean_mesh_height();
static void shift_mesh_height(); static void shift_mesh_height();
static void probe_entire_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map, const bool stow_probe, bool do_furthest); static void probe_entire_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map, const bool stow_probe, bool do_furthest);
static void manually_probe_remaining_mesh(const float&, const float&, const float&, const float&, const bool);
static void tilt_mesh_based_on_3pts(const float &z1, const float &z2, const float &z3); static void tilt_mesh_based_on_3pts(const float &z1, const float &z2, const float &z3);
static void tilt_mesh_based_on_probed_grid(const bool do_ubl_mesh_map); static void tilt_mesh_based_on_probed_grid(const bool do_ubl_mesh_map);
static void g29_what_command(); static void g29_what_command();
static void g29_eeprom_dump(); static void g29_eeprom_dump();
static void g29_compare_current_mesh_to_stored_mesh(); static void g29_compare_current_mesh_to_stored_mesh();
static void fine_tune_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map);
static bool smart_fill_one(const uint8_t x, const uint8_t y, const int8_t xdir, const int8_t ydir); static bool smart_fill_one(const uint8_t x, const uint8_t y, const int8_t xdir, const int8_t ydir);
static void smart_fill_mesh(); static void smart_fill_mesh();
@ -137,7 +141,7 @@ class unified_bed_leveling {
MESH_MIN_Y + 14 * (MESH_Y_DIST), MESH_MIN_Y + 15 * (MESH_Y_DIST) MESH_MIN_Y + 14 * (MESH_Y_DIST), MESH_MIN_Y + 15 * (MESH_Y_DIST)
}; };
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTIPANEL)
static bool lcd_map_control; static bool lcd_map_control;
#endif #endif

View file

@ -24,6 +24,8 @@
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(AUTO_BED_LEVELING_UBL)
//#define UBL_DEVEL_DEBUGGING
#include "ubl.h" #include "ubl.h"
#include "../../../Marlin.h" #include "../../../Marlin.h"
@ -308,8 +310,7 @@
void unified_bed_leveling::G29() { void unified_bed_leveling::G29() {
if (!settings.calc_num_meshes()) { if (!settings.calc_num_meshes()) {
SERIAL_PROTOCOLLNPGM("?You need to enable your EEPROM and initialize it"); SERIAL_PROTOCOLLNPGM("?Enable EEPROM and init with M502, M500.\n");
SERIAL_PROTOCOLLNPGM("with M502, M500, M501 in that order.\n");
return; return;
} }
@ -458,7 +459,7 @@
parser.seen('T'), parser.seen('E'), parser.seen('U')); parser.seen('T'), parser.seen('E'), parser.seen('U'));
break; break;
#endif #endif // HAS_BED_PROBE
case 2: { case 2: {
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
@ -728,8 +729,31 @@
z_values[x][y] += g29_constant; z_values[x][y] += g29_constant;
} }
#if HAS_BED_PROBE #if ENABLED(NEWPANEL)
typedef void (*clickFunc_t)();
bool click_and_hold(const clickFunc_t func=NULL) {
if (is_lcd_clicked()) {
lcd_quick_feedback();
const millis_t nxt = millis() + 1500UL;
while (is_lcd_clicked()) { // Loop while the encoder is pressed. Uses hardware flag!
idle(); // idle, of course
if (ELAPSED(millis(), nxt)) { // After 1.5 seconds
lcd_quick_feedback();
if (func) (*func)();
wait_for_release();
safe_delay(50); // Debounce the Encoder wheel
return true;
}
}
}
return false;
}
#endif // NEWPANEL
#if HAS_BED_PROBE
/** /**
* Probe all invalidated locations of the mesh that can be reached by the probe. * Probe all invalidated locations of the mesh that can be reached by the probe.
* This attempts to fill in locations closest to the nozzle's start location first. * This attempts to fill in locations closest to the nozzle's start location first.
@ -754,10 +778,9 @@
SERIAL_PROTOCOLLNPGM("\nMesh only partially populated.\n"); SERIAL_PROTOCOLLNPGM("\nMesh only partially populated.\n");
lcd_quick_feedback(); lcd_quick_feedback();
STOW_PROBE(); STOW_PROBE();
while (is_lcd_clicked()) idle(); wait_for_release();
lcd_external_control = false; lcd_external_control = false;
restore_ubl_active_state_and_leave(); restore_ubl_active_state_and_leave();
safe_delay(50); // Debounce the Encoder wheel
return; return;
} }
#endif #endif
@ -894,26 +917,27 @@
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
float unified_bed_leveling::measure_point_with_encoder() { void unified_bed_leveling::move_z_with_encoder(const float &multiplier) {
wait_for_release();
while (is_lcd_clicked()) delay(50); // wait for user to release encoder wheel while (!is_lcd_clicked()) {
delay(50); // debounce
KEEPALIVE_STATE(PAUSED_FOR_USER);
while (!is_lcd_clicked()) { // we need the loop to move the nozzle based on the encoder wheel here!
idle(); idle();
if (encoder_diff) { if (encoder_diff) {
do_blocking_move_to_z(current_position[Z_AXIS] + 0.01 * float(encoder_diff)); do_blocking_move_to_z(current_position[Z_AXIS] + float(encoder_diff) * multiplier);
encoder_diff = 0; encoder_diff = 0;
} }
} }
}
float unified_bed_leveling::measure_point_with_encoder() {
KEEPALIVE_STATE(PAUSED_FOR_USER);
move_z_with_encoder(0.01);
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
return current_position[Z_AXIS]; return current_position[Z_AXIS];
} }
static void echo_and_take_a_measurement() { SERIAL_PROTOCOLLNPGM(" and take a measurement."); } static void echo_and_take_a_measurement() { SERIAL_PROTOCOLLNPGM(" and take a measurement."); }
float unified_bed_leveling::measure_business_card_thickness(const float in_height) { float unified_bed_leveling::measure_business_card_thickness(const float &in_height) {
lcd_external_control = true; lcd_external_control = true;
save_ubl_active_state_and_disable(); // Disable bed level correction for probing save_ubl_active_state_and_disable(); // Disable bed level correction for probing
@ -953,12 +977,19 @@
return thickness; return thickness;
} }
void abort_manual_probe_remaining_mesh() {
SERIAL_PROTOCOLLNPGM("\nMesh only partially populated.");
do_blocking_move_to_z(Z_CLEARANCE_DEPLOY_PROBE);
lcd_external_control = false;
KEEPALIVE_STATE(IN_HANDLER);
ubl.restore_ubl_active_state_and_leave();
}
void unified_bed_leveling::manually_probe_remaining_mesh(const float &rx, const float &ry, const float &z_clearance, const float &thick, const bool do_ubl_mesh_map) { void unified_bed_leveling::manually_probe_remaining_mesh(const float &rx, const float &ry, const float &z_clearance, const float &thick, const bool do_ubl_mesh_map) {
lcd_external_control = true; lcd_external_control = true;
save_ubl_active_state_and_disable(); // we don't do bed level correction because we want the raw data when we probe save_ubl_active_state_and_disable(); // we don't do bed level correction because we want the raw data when we probe
do_blocking_move_to(rx, ry, Z_CLEARANCE_BETWEEN_PROBES); do_blocking_move_to(rx, ry, Z_CLEARANCE_BETWEEN_PROBES);
lcd_return_to_status(); lcd_return_to_status();
@ -989,35 +1020,16 @@
const float z_step = 0.01; // existing behavior: 0.01mm per click, occasionally step const float z_step = 0.01; // existing behavior: 0.01mm per click, occasionally step
//const float z_step = 1.0 / planner.axis_steps_per_mm[Z_AXIS]; // approx one step each click //const float z_step = 1.0 / planner.axis_steps_per_mm[Z_AXIS]; // approx one step each click
while (is_lcd_clicked()) delay(50); // wait for user to release encoder wheel move_z_with_encoder(z_step);
delay(50); // debounce
while (!is_lcd_clicked()) { // we need the loop to move the nozzle based on the encoder wheel here!
idle();
if (encoder_diff) {
do_blocking_move_to_z(current_position[Z_AXIS] + float(encoder_diff) * z_step);
encoder_diff = 0;
}
}
// this sequence to detect an is_lcd_clicked() debounce it and leave if it is if (click_and_hold()) {
// a Press and Hold is repeated in a lot of places (including G26_Mesh_Validation.cpp). This
// should be redone and compressed.
const millis_t nxt = millis() + 1500L;
while (is_lcd_clicked()) { // debounce and watch for abort
idle();
if (ELAPSED(millis(), nxt)) {
SERIAL_PROTOCOLLNPGM("\nMesh only partially populated."); SERIAL_PROTOCOLLNPGM("\nMesh only partially populated.");
do_blocking_move_to_z(Z_CLEARANCE_DEPLOY_PROBE); do_blocking_move_to_z(Z_CLEARANCE_DEPLOY_PROBE);
lcd_quick_feedback();
while (is_lcd_clicked()) idle();
lcd_external_control = false; lcd_external_control = false;
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
restore_ubl_active_state_and_leave(); restore_ubl_active_state_and_leave();
return; return;
} }
}
z_values[location.x_index][location.y_index] = current_position[Z_AXIS] - thick; z_values[location.x_index][location.y_index] = current_position[Z_AXIS] - thick;
if (g29_verbose_level > 2) { if (g29_verbose_level > 2) {
@ -1033,7 +1045,6 @@
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
do_blocking_move_to(rx, ry, Z_CLEARANCE_DEPLOY_PROBE); do_blocking_move_to(rx, ry, Z_CLEARANCE_DEPLOY_PROBE);
} }
#endif // NEWPANEL #endif // NEWPANEL
bool unified_bed_leveling::g29_parameter_parsing() { bool unified_bed_leveling::g29_parameter_parsing() {
@ -1151,36 +1162,39 @@
return UBL_OK; return UBL_OK;
} }
static int ubl_state_at_invocation = 0, static uint8_t ubl_state_at_invocation = 0;
ubl_state_recursion_chk = 0;
#ifdef UBL_DEVEL_DEBUGGING
static uint8_t ubl_state_recursion_chk = 0;
#endif
void unified_bed_leveling::save_ubl_active_state_and_disable() { void unified_bed_leveling::save_ubl_active_state_and_disable() {
#ifdef UBL_DEVEL_DEBUGGING
ubl_state_recursion_chk++; ubl_state_recursion_chk++;
if (ubl_state_recursion_chk != 1) { if (ubl_state_recursion_chk != 1) {
SERIAL_ECHOLNPGM("save_ubl_active_state_and_disabled() called multiple times in a row."); SERIAL_ECHOLNPGM("save_ubl_active_state_and_disabled() called multiple times in a row.");
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
LCD_MESSAGEPGM(MSG_UBL_SAVE_ERROR); LCD_MESSAGEPGM(MSG_UBL_SAVE_ERROR);
lcd_quick_feedback(); lcd_quick_feedback();
#endif #endif
return; return;
} }
#endif
ubl_state_at_invocation = planner.leveling_active; ubl_state_at_invocation = planner.leveling_active;
set_bed_leveling_enabled(false); set_bed_leveling_enabled(false);
} }
void unified_bed_leveling::restore_ubl_active_state_and_leave() { void unified_bed_leveling::restore_ubl_active_state_and_leave() {
#ifdef UBL_DEVEL_DEBUGGING
if (--ubl_state_recursion_chk) { if (--ubl_state_recursion_chk) {
SERIAL_ECHOLNPGM("restore_ubl_active_state_and_leave() called too many times."); SERIAL_ECHOLNPGM("restore_ubl_active_state_and_leave() called too many times.");
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
LCD_MESSAGEPGM(MSG_UBL_RESTORE_ERROR); LCD_MESSAGEPGM(MSG_UBL_RESTORE_ERROR);
lcd_quick_feedback(); lcd_quick_feedback();
#endif #endif
return; return;
} }
#endif
set_bed_leveling_enabled(ubl_state_at_invocation); set_bed_leveling_enabled(ubl_state_at_invocation);
} }
@ -1250,6 +1264,7 @@
SERIAL_EOL(); SERIAL_EOL();
safe_delay(50); safe_delay(50);
#ifdef UBL_DEVEL_DEBUGGING
SERIAL_PROTOCOLLNPAIR("ubl_state_at_invocation :", ubl_state_at_invocation); SERIAL_PROTOCOLLNPAIR("ubl_state_at_invocation :", ubl_state_at_invocation);
SERIAL_EOL(); SERIAL_EOL();
SERIAL_PROTOCOLLNPAIR("ubl_state_recursion_chk :", ubl_state_recursion_chk); SERIAL_PROTOCOLLNPAIR("ubl_state_recursion_chk :", ubl_state_recursion_chk);
@ -1272,6 +1287,7 @@
SERIAL_PROTOCOLPAIR("EEPROM can hold ", settings.calc_num_meshes()); SERIAL_PROTOCOLPAIR("EEPROM can hold ", settings.calc_num_meshes());
SERIAL_PROTOCOLLNPGM(" meshes.\n"); SERIAL_PROTOCOLLNPGM(" meshes.\n");
safe_delay(25); safe_delay(25);
#endif // UBL_DEVEL_DEBUGGING
if (!sanity_check()) { if (!sanity_check()) {
echo_name(); echo_name();
@ -1341,11 +1357,10 @@
z_values[x][y] -= tmp_z_values[x][y]; z_values[x][y] -= tmp_z_values[x][y];
} }
mesh_index_pair unified_bed_leveling::find_furthest_invalid_mesh_point() { mesh_index_pair unified_bed_leveling::find_furthest_invalid_mesh_point() {
bool found_a_NAN = false; bool found_a_NAN = false, found_a_real = false;
bool found_a_real = false;
mesh_index_pair out_mesh; mesh_index_pair out_mesh;
out_mesh.x_index = out_mesh.y_index = -1; out_mesh.x_index = out_mesh.y_index = -1;
out_mesh.distance = -99999.99; out_mesh.distance = -99999.99;
@ -1353,12 +1368,12 @@
for (int8_t i = 0; i < GRID_MAX_POINTS_X; i++) { for (int8_t i = 0; i < GRID_MAX_POINTS_X; i++) {
for (int8_t j = 0; j < GRID_MAX_POINTS_Y; j++) { for (int8_t j = 0; j < GRID_MAX_POINTS_Y; j++) {
if ( isnan(z_values[i][j])) { // Check to see if this location holds an invalid mesh point if (isnan(z_values[i][j])) { // Check to see if this location holds an invalid mesh point
const float mx = mesh_index_to_xpos(i), const float mx = mesh_index_to_xpos(i),
my = mesh_index_to_ypos(j); my = mesh_index_to_ypos(j);
if ( !position_is_reachable_by_probe(mx, my)) // make sure the probe can get to the mesh point if (!position_is_reachable_by_probe(mx, my)) // make sure the probe can get to the mesh point
continue; continue;
found_a_NAN = true; found_a_NAN = true;
@ -1452,11 +1467,18 @@
} }
} // for j } // for j
} // for i } // for i
return out_mesh; return out_mesh;
} }
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
void abort_fine_tune() {
lcd_return_to_status();
do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
LCD_MESSAGEPGM(MSG_EDITING_STOPPED);
}
void unified_bed_leveling::fine_tune_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map) { void unified_bed_leveling::fine_tune_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map) {
if (!parser.seen('R')) // fine_tune_mesh() is special. If no repetition count flag is specified if (!parser.seen('R')) // fine_tune_mesh() is special. If no repetition count flag is specified
g29_repetition_cnt = 1; // do exactly one mesh location. Otherwise use what the parser decided. g29_repetition_cnt = 1; // do exactly one mesh location. Otherwise use what the parser decided.
@ -1499,15 +1521,8 @@
if (!position_is_reachable(rawx, rawy)) // SHOULD NOT OCCUR because find_closest_mesh_point_of_type will only return reachable if (!position_is_reachable(rawx, rawy)) // SHOULD NOT OCCUR because find_closest_mesh_point_of_type will only return reachable
break; break;
float new_z = z_values[location.x_index][location.y_index];
if (isnan(new_z)) // if the mesh point is invalid, set it to 0.0 so it can be edited
new_z = 0.0;
do_blocking_move_to(rawx, rawy, Z_CLEARANCE_BETWEEN_PROBES); // Move the nozzle to the edit point do_blocking_move_to(rawx, rawy, Z_CLEARANCE_BETWEEN_PROBES); // Move the nozzle to the edit point
new_z = FLOOR(new_z * 1000.0) * 0.001; // Chop off digits after the 1000ths place
KEEPALIVE_STATE(PAUSED_FOR_USER); KEEPALIVE_STATE(PAUSED_FOR_USER);
lcd_external_control = true; lcd_external_control = true;
@ -1515,15 +1530,19 @@
lcd_refresh(); lcd_refresh();
float new_z = z_values[location.x_index][location.y_index];
if (isnan(new_z)) new_z = 0.0; // Set invalid mesh points to 0.0 so they can be edited
new_z = FLOOR(new_z * 1000.0) * 0.001; // Chop off digits after the 1000ths place
lcd_mesh_edit_setup(new_z); lcd_mesh_edit_setup(new_z);
do { while (!is_lcd_clicked()) {
new_z = lcd_mesh_edit(); new_z = lcd_mesh_edit();
#if ENABLED(UBL_MESH_EDIT_MOVES_Z) #if ENABLED(UBL_MESH_EDIT_MOVES_Z)
do_blocking_move_to_z(h_offset + new_z); // Move the nozzle as the point is edited do_blocking_move_to_z(h_offset + new_z); // Move the nozzle as the point is edited
#endif #endif
idle(); idle();
} while (!is_lcd_clicked()); }
if (!lcd_map_control) lcd_return_to_status(); if (!lcd_map_control) lcd_return_to_status();
@ -1535,19 +1554,8 @@
// this sequence to detect an is_lcd_clicked() debounce it and leave if it is // this sequence to detect an is_lcd_clicked() debounce it and leave if it is
// a Press and Hold is repeated in a lot of places (including G26_Mesh_Validation.cpp). This // a Press and Hold is repeated in a lot of places (including G26_Mesh_Validation.cpp). This
// should be redone and compressed. // should be redone and compressed.
const millis_t nxt = millis() + 1500UL; if (click_and_hold(abort_fine_tune))
while (is_lcd_clicked()) { // debounce and watch for abort
idle();
if (ELAPSED(millis(), nxt)) {
lcd_return_to_status();
do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
LCD_MESSAGEPGM(MSG_EDITING_STOPPED);
while (is_lcd_clicked()) idle();
goto FINE_TUNE_EXIT; goto FINE_TUNE_EXIT;
}
}
safe_delay(20); // We don't want any switch noise. safe_delay(20); // We don't want any switch noise.

View file

@ -53,6 +53,9 @@
#error "SIZE_OF_CROSSHAIRS must be less than SIZE_OF_INTERSECTION_CIRCLES." #error "SIZE_OF_CROSSHAIRS must be less than SIZE_OF_INTERSECTION_CIRCLES."
#endif #endif
#define G26_OK false
#define G26_ERR true
/** /**
* G26 Mesh Validation Tool * G26 Mesh Validation Tool
* *
@ -156,31 +159,21 @@ int8_t g26_prime_flag;
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
/** /**
* Detect is_lcd_clicked, debounce it, and return true for cancel * If the LCD is clicked, cancel, wait for release, return true
*/ */
bool user_canceled() { bool user_canceled() {
if (!is_lcd_clicked()) return false; if (!is_lcd_clicked()) return false; // Return if the button isn't pressed
safe_delay(10); // Wait for click to settle
#if ENABLED(ULTRA_LCD)
lcd_setstatusPGM(PSTR("Mesh Validation Stopped."), 99); lcd_setstatusPGM(PSTR("Mesh Validation Stopped."), 99);
#if ENABLED(ULTIPANEL)
lcd_quick_feedback(); lcd_quick_feedback();
#endif #endif
wait_for_release();
while (!is_lcd_clicked()) idle(); // Wait for button release
// If the button is suddenly pressed again,
// ask the user to resolve the issue
lcd_setstatusPGM(PSTR("Release button"), 99); // will never appear...
while (is_lcd_clicked()) idle(); // unless this loop happens
lcd_reset_status();
return true; return true;
} }
bool exit_from_g26() { bool exit_from_g26() {
lcd_setstatusPGM(PSTR("Leaving G26"), -1); lcd_setstatusPGM(PSTR("Leaving G26"), -1);
while (is_lcd_clicked()) idle(); wait_for_release();
return G26_ERR; return G26_ERR;
} }
@ -268,9 +261,7 @@ void move_to(const float &rx, const float &ry, const float &z, const float &e_de
set_destination_from_current(); set_destination_from_current();
} }
FORCE_INLINE void move_to(const float where[XYZE], const float &de) { FORCE_INLINE void move_to(const float where[XYZE], const float &de) { move_to(where[X_AXIS], where[Y_AXIS], where[Z_AXIS], de); }
move_to(where[X_AXIS], where[Y_AXIS], where[Z_AXIS], de);
}
void retract_filament(const float where[XYZE]) { void retract_filament(const float where[XYZE]) {
if (!g26_retracted) { // Only retract if we are not already retracted! if (!g26_retracted) { // Only retract if we are not already retracted!
@ -314,9 +305,8 @@ void print_line_from_here_to_there(const float &sx, const float &sy, const float
// If the end point of the line is closer to the nozzle, flip the direction, // If the end point of the line is closer to the nozzle, flip the direction,
// moving from the end to the start. On very small lines the optimization isn't worth it. // moving from the end to the start. On very small lines the optimization isn't worth it.
if (dist_end < dist_start && (SIZE_OF_INTERSECTION_CIRCLES) < FABS(line_length)) { if (dist_end < dist_start && (SIZE_OF_INTERSECTION_CIRCLES) < FABS(line_length))
return print_line_from_here_to_there(ex, ey, ez, sx, sy, sz); return print_line_from_here_to_there(ex, ey, ez, sx, sy, sz);
}
// Decide whether to retract & bump // Decide whether to retract & bump
@ -373,7 +363,6 @@ inline bool look_for_lines_to_connect() {
SERIAL_EOL(); SERIAL_EOL();
//debug_current_and_destination(PSTR("Connecting horizontal line.")); //debug_current_and_destination(PSTR("Connecting horizontal line."));
} }
print_line_from_here_to_there(sx, sy, g26_layer_height, ex, ey, g26_layer_height); print_line_from_here_to_there(sx, sy, g26_layer_height, ex, ey, g26_layer_height);
} }
bitmap_set(horizontal_mesh_line_flags, i, j); // Mark it as done so we don't do it again, even if we skipped it bitmap_set(horizontal_mesh_line_flags, i, j); // Mark it as done so we don't do it again, even if we skipped it
@ -405,8 +394,8 @@ inline bool look_for_lines_to_connect() {
SERIAL_ECHOPAIR(", ey=", ey); SERIAL_ECHOPAIR(", ey=", ey);
SERIAL_CHAR(')'); SERIAL_CHAR(')');
SERIAL_EOL(); SERIAL_EOL();
#if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(AUTO_BED_LEVELING_UBL)
void debug_current_and_destination(const char *title);
debug_current_and_destination(PSTR("Connecting vertical line.")); debug_current_and_destination(PSTR("Connecting vertical line."));
#endif #endif
} }
@ -515,7 +504,7 @@ inline bool prime_nozzle() {
idle(); idle();
} }
while (is_lcd_clicked()) idle(); // Debounce Encoder Wheel wait_for_release();
strcpy_P(lcd_status_message, PSTR("Done Priming")); // We can't do lcd_setstatusPGM() without having it continue; strcpy_P(lcd_status_message, PSTR("Done Priming")); // We can't do lcd_setstatusPGM() without having it continue;
// So... We cheat to get a message up. // So... We cheat to get a message up.
@ -678,9 +667,8 @@ void GcodeSuite::G26() {
return; return;
} }
g26_x_pos = parser.seenval('X') ? RAW_X_POSITION(parser.value_linear_units()) : current_position[X_AXIS], g26_x_pos = parser.seenval('X') ? RAW_X_POSITION(parser.value_linear_units()) : current_position[X_AXIS];
g26_y_pos = parser.seenval('Y') ? RAW_Y_POSITION(parser.value_linear_units()) : current_position[Y_AXIS]; g26_y_pos = parser.seenval('Y') ? RAW_Y_POSITION(parser.value_linear_units()) : current_position[Y_AXIS];
if (!position_is_reachable(g26_x_pos, g26_y_pos)) { if (!position_is_reachable(g26_x_pos, g26_y_pos)) {
SERIAL_PROTOCOLLNPGM("?Specified X,Y coordinate out of bounds."); SERIAL_PROTOCOLLNPGM("?Specified X,Y coordinate out of bounds.");
return; return;
@ -727,6 +715,7 @@ void GcodeSuite::G26() {
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
lcd_external_control = true; lcd_external_control = true;
#endif #endif
//debug_current_and_destination(PSTR("Starting G26 Mesh Validation Pattern.")); //debug_current_and_destination(PSTR("Starting G26 Mesh Validation Pattern."));
/** /**

View file

@ -51,7 +51,7 @@ void GcodeSuite::M502() {
* M503: print settings currently in memory * M503: print settings currently in memory
*/ */
void GcodeSuite::M503() { void GcodeSuite::M503() {
(void)settings.report(parser.boolval('S')); (void)settings.report(parser.seen('S') && !parser.value_bool());
} }
#endif // !DISABLE_M503 #endif // !DISABLE_M503

View file

@ -313,11 +313,15 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
#if ENABLED(LCD_PROGRESS_BAR) #if ENABLED(LCD_PROGRESS_BAR)
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#error "LCD_PROGRESS_BAR requires SDSUPPORT." #error "LCD_PROGRESS_BAR requires SDSUPPORT."
#elif DISABLED(ULTRA_LCD)
#error "LCD_PROGRESS_BAR requires a character LCD."
#elif ENABLED(DOGLCD) #elif ENABLED(DOGLCD)
#error "LCD_PROGRESS_BAR does not apply to graphical displays." #error "LCD_PROGRESS_BAR does not apply to graphical displays."
#elif ENABLED(FILAMENT_LCD_DISPLAY) #elif ENABLED(FILAMENT_LCD_DISPLAY)
#error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both." #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both."
#endif #endif
#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && DISABLED(DOGLCD)
#error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR or Graphical LCD."
#endif #endif
/** /**

View file

@ -85,12 +85,13 @@ int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_spe
#endif #endif
uint8_t lcd_status_update_delay = 1, // First update one loop delayed uint8_t lcd_status_update_delay = 1, // First update one loop delayed
lcd_status_message_level; // Higher level overrides lower lcd_status_message_level; // Higher level blocks lower level
char lcd_status_message[3 * (LCD_WIDTH) + 1] = WELCOME_MSG; // worst case is kana with up to 3*LCD_WIDTH+1 char lcd_status_message[3 * (LCD_WIDTH) + 1] = WELCOME_MSG; // worst case is kana with up to 3*LCD_WIDTH+1
#if ENABLED(STATUS_MESSAGE_SCROLLING) #if ENABLED(STATUS_MESSAGE_SCROLLING)
uint8_t status_scroll_pos = 0; uint8_t status_scroll_pos = 0;
#endif #endif
#if ENABLED(SCROLL_LONG_FILENAMES) #if ENABLED(SCROLL_LONG_FILENAMES)
uint8_t filename_scroll_pos, filename_scroll_max, filename_scroll_hash; uint8_t filename_scroll_pos, filename_scroll_max, filename_scroll_hash;
#endif #endif
@ -163,8 +164,6 @@ uint16_t max_display_update_time = 0;
extern bool powersupply_on; extern bool powersupply_on;
#endif #endif
float move_menu_scale;
//////////////////////////////////////////// ////////////////////////////////////////////
///////////////// Menu Tree //////////////// ///////////////// Menu Tree ////////////////
//////////////////////////////////////////// ////////////////////////////////////////////
@ -244,7 +243,6 @@ uint16_t max_display_update_time = 0;
void menu_action_setting_edit_callback_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback, const bool live=false); \ void menu_action_setting_edit_callback_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback, const bool live=false); \
typedef void _name##_void typedef void _name##_void
DECLARE_MENU_EDIT_TYPE(uint32_t, long5);
DECLARE_MENU_EDIT_TYPE(int16_t, int3); DECLARE_MENU_EDIT_TYPE(int16_t, int3);
DECLARE_MENU_EDIT_TYPE(uint8_t, int8); DECLARE_MENU_EDIT_TYPE(uint8_t, int8);
DECLARE_MENU_EDIT_TYPE(float, float3); DECLARE_MENU_EDIT_TYPE(float, float3);
@ -254,6 +252,7 @@ uint16_t max_display_update_time = 0;
DECLARE_MENU_EDIT_TYPE(float, float51); DECLARE_MENU_EDIT_TYPE(float, float51);
DECLARE_MENU_EDIT_TYPE(float, float52); DECLARE_MENU_EDIT_TYPE(float, float52);
DECLARE_MENU_EDIT_TYPE(float, float62); DECLARE_MENU_EDIT_TYPE(float, float62);
DECLARE_MENU_EDIT_TYPE(uint32_t, long5);
void menu_action_setting_edit_bool(const char* pstr, bool* ptr); void menu_action_setting_edit_bool(const char* pstr, bool* ptr);
void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, screenFunc_t callbackFunc); void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, screenFunc_t callbackFunc);
@ -566,10 +565,9 @@ uint16_t max_display_update_time = 0;
static bool no_reentry = false; static bool no_reentry = false;
if (lcdDrawUpdate) lcd_implementation_drawmenu_static(LCD_HEIGHT >= 4 ? 1 : 0, sync_message); if (lcdDrawUpdate) lcd_implementation_drawmenu_static(LCD_HEIGHT >= 4 ? 1 : 0, sync_message);
if (no_reentry) return; if (no_reentry) return;
// Make this the current handler till all moves are done // Make this the current handler till all moves are done
no_reentry = true; no_reentry = true;
screenFunc_t old_screen = currentScreen; const screenFunc_t old_screen = currentScreen;
lcd_goto_screen(_lcd_synchronize); lcd_goto_screen(_lcd_synchronize);
stepper.synchronize(); stepper.synchronize();
no_reentry = false; no_reentry = false;
@ -997,7 +995,7 @@ void kill_screen(const char* lcd_msg) {
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
if (card.cardOK) { if (card.cardOK) {
if (card.isFileOpen()) { if (card.isFileOpen()) {
if (IS_SD_PRINTING) if (card.sdprinting)
MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause); MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause);
else else
MENU_ITEM(function, MSG_RESUME_PRINT, lcd_sdcard_resume); MENU_ITEM(function, MSG_RESUME_PRINT, lcd_sdcard_resume);
@ -1074,7 +1072,7 @@ void kill_screen(const char* lcd_msg) {
if (PAGE_CONTAINS(20, 20)) u8g.drawBitmapP(nozzle + 0, 20, 3, 1, offset_bedline_bmp); if (PAGE_CONTAINS(20, 20)) u8g.drawBitmapP(nozzle + 0, 20, 3, 1, offset_bedline_bmp);
// Draw cw/ccw indicator and up/down arrows. // Draw cw/ccw indicator and up/down arrows.
if (PAGE_CONTAINS(47,62)) { if (PAGE_CONTAINS(47, 62)) {
u8g.drawBitmapP(left + 0, 47, 3, 16, rot_down); u8g.drawBitmapP(left + 0, 47, 3, 16, rot_down);
u8g.drawBitmapP(right + 0, 47, 3, 16, rot_up); u8g.drawBitmapP(right + 0, 47, 3, 16, rot_up);
u8g.drawBitmapP(right + 20, 48 - dir, 2, 13, up_arrow_bmp); u8g.drawBitmapP(right + 20, 48 - dir, 2, 13, up_arrow_bmp);
@ -1115,6 +1113,8 @@ void kill_screen(const char* lcd_msg) {
ENCODER_DIRECTION_NORMAL(); ENCODER_DIRECTION_NORMAL();
if (encoderPosition) { if (encoderPosition) {
const int16_t babystep_increment = (int32_t)encoderPosition * (BABYSTEP_MULTIPLICATOR); const int16_t babystep_increment = (int32_t)encoderPosition * (BABYSTEP_MULTIPLICATOR);
encoderPosition = 0;
const float new_zoffset = zprobe_zoffset + planner.steps_to_mm[Z_AXIS] * babystep_increment; const float new_zoffset = zprobe_zoffset + planner.steps_to_mm[Z_AXIS] * babystep_increment;
if (WITHIN(new_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) { if (WITHIN(new_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) {
@ -1124,7 +1124,6 @@ void kill_screen(const char* lcd_msg) {
zprobe_zoffset = new_zoffset; zprobe_zoffset = new_zoffset;
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
} }
encoderPosition = 0;
} }
if (lcdDrawUpdate) { if (lcdDrawUpdate) {
lcd_implementation_drawedit(PSTR(MSG_ZPROBE_ZOFFSET), ftostr43sign(zprobe_zoffset)); lcd_implementation_drawedit(PSTR(MSG_ZPROBE_ZOFFSET), ftostr43sign(zprobe_zoffset));
@ -1164,12 +1163,13 @@ void kill_screen(const char* lcd_msg) {
mesh_edit_value = float(rounded - (rounded % 5L)) / 1000.0; mesh_edit_value = float(rounded - (rounded % 5L)) / 1000.0;
} }
if (lcdDrawUpdate) if (lcdDrawUpdate) {
lcd_implementation_drawedit(msg, ftostr43sign(mesh_edit_value)); lcd_implementation_drawedit(msg, ftostr43sign(mesh_edit_value));
#if ENABLED(MESH_EDIT_GFX_OVERLAY) #if ENABLED(MESH_EDIT_GFX_OVERLAY)
_lcd_zoffset_overlay_gfx(mesh_edit_value); _lcd_zoffset_overlay_gfx(mesh_edit_value);
#endif #endif
} }
}
void _lcd_mesh_edit_NOP() { void _lcd_mesh_edit_NOP() {
defer_return_to_status = true; defer_return_to_status = true;
@ -1182,7 +1182,7 @@ void kill_screen(const char* lcd_msg) {
return mesh_edit_value; return mesh_edit_value;
} }
void lcd_mesh_edit_setup(float initial) { void lcd_mesh_edit_setup(const float initial) {
mesh_edit_value = mesh_edit_accumulator = initial; mesh_edit_value = mesh_edit_accumulator = initial;
lcd_goto_screen(_lcd_mesh_edit_NOP); lcd_goto_screen(_lcd_mesh_edit_NOP);
} }
@ -1203,6 +1203,7 @@ void kill_screen(const char* lcd_msg) {
#endif // AUTO_BED_LEVELING_UBL #endif // AUTO_BED_LEVELING_UBL
/** /**
* Watch temperature callbacks * Watch temperature callbacks
*/ */
@ -2030,8 +2031,8 @@ void kill_screen(const char* lcd_msg) {
*/ */
void _lcd_ubl_adjust_height_cmd() { void _lcd_ubl_adjust_height_cmd() {
char UBL_LCD_GCODE[16]; char UBL_LCD_GCODE[16];
const int ind = ubl_height_amount < 0 ? 6 : 7; const int ind = ubl_height_amount > 0 ? 9 : 10;
strcpy_P(UBL_LCD_GCODE, PSTR("G29 P6-")); strcpy_P(UBL_LCD_GCODE, PSTR("G29 P6 C -"));
sprintf_P(&UBL_LCD_GCODE[ind], PSTR(".%i"), abs(ubl_height_amount)); sprintf_P(&UBL_LCD_GCODE[ind], PSTR(".%i"), abs(ubl_height_amount));
enqueue_and_echo_command(UBL_LCD_GCODE); enqueue_and_echo_command(UBL_LCD_GCODE);
} }
@ -2047,8 +2048,7 @@ void kill_screen(const char* lcd_msg) {
void _lcd_ubl_height_adjust_menu() { void _lcd_ubl_height_adjust_menu() {
START_MENU(); START_MENU();
MENU_BACK(MSG_UBL_EDIT_MESH_MENU); MENU_BACK(MSG_UBL_EDIT_MESH_MENU);
MENU_ITEM_EDIT(int3, MSG_UBL_MESH_HEIGHT_AMOUNT, &ubl_height_amount, -9, 9); MENU_ITEM_EDIT_CALLBACK(int3, MSG_UBL_MESH_HEIGHT_AMOUNT, &ubl_height_amount, -9, 9, _lcd_ubl_adjust_height_cmd);
MENU_ITEM(function, MSG_UBL_MESH_HEIGHT_ADJUST, _lcd_ubl_adjust_height_cmd);
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status); MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
END_MENU(); END_MENU();
} }
@ -2184,8 +2184,7 @@ void kill_screen(const char* lcd_msg) {
void _lcd_ubl_fillin_menu() { void _lcd_ubl_fillin_menu() {
START_MENU(); START_MENU();
MENU_BACK(MSG_UBL_BUILD_MESH_MENU); MENU_BACK(MSG_UBL_BUILD_MESH_MENU);
MENU_ITEM_EDIT(int3, MSG_UBL_FILLIN_AMOUNT, &ubl_fillin_amount, 0, 9); MENU_ITEM_EDIT_CALLBACK(int3, MSG_UBL_FILLIN_AMOUNT, &ubl_fillin_amount, 0, 9, _lcd_ubl_fillin_amount_cmd);
MENU_ITEM(function, MSG_UBL_FILLIN_MESH, _lcd_ubl_fillin_amount_cmd);
MENU_ITEM(function, MSG_UBL_SMART_FILLIN, _lcd_ubl_smart_fillin_cmd); MENU_ITEM(function, MSG_UBL_SMART_FILLIN, _lcd_ubl_smart_fillin_cmd);
MENU_ITEM(gcode, MSG_UBL_MANUAL_FILLIN, PSTR("G29 P2 B T0")); MENU_ITEM(gcode, MSG_UBL_MANUAL_FILLIN, PSTR("G29 P2 B T0"));
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status); MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
@ -2644,6 +2643,8 @@ void kill_screen(const char* lcd_msg) {
END_MENU(); END_MENU();
} }
float move_menu_scale;
#if ENABLED(DELTA_CALIBRATION_MENU) || (ENABLED(DELTA_AUTO_CALIBRATION) && !HAS_BED_PROBE) #if ENABLED(DELTA_CALIBRATION_MENU) || (ENABLED(DELTA_AUTO_CALIBRATION) && !HAS_BED_PROBE)
void lcd_move_z(); void lcd_move_z();
@ -2653,13 +2654,11 @@ void kill_screen(const char* lcd_msg) {
reset_bed_level(); // After calibration bed-level data is no longer valid reset_bed_level(); // After calibration bed-level data is no longer valid
#endif #endif
float z_dest = (Z_CLEARANCE_BETWEEN_PROBES) + (DELTA_PRINTABLE_RADIUS) / 5; line_to_z((Z_CLEARANCE_BETWEEN_PROBES) + (DELTA_PRINTABLE_RADIUS) / 5);
line_to_z(z_dest);
current_position[X_AXIS] = rx; current_position[X_AXIS] = rx;
current_position[Y_AXIS] = ry; current_position[Y_AXIS] = ry;
line_to_current_z(); line_to_current_z();
z_dest = Z_CLEARANCE_BETWEEN_PROBES; line_to_z(Z_CLEARANCE_BETWEEN_PROBES);
line_to_z(z_dest);
lcd_synchronize(); lcd_synchronize();
move_menu_scale = PROBE_MANUALLY_STEP; move_menu_scale = PROBE_MANUALLY_STEP;
@ -2813,7 +2812,6 @@ void kill_screen(const char* lcd_msg) {
#endif #endif
manual_move_e_index = eindex >= 0 ? eindex : active_extruder; manual_move_e_index = eindex >= 0 ? eindex : active_extruder;
#endif #endif
manual_move_start_time = millis() + (move_menu_scale < 0.99 ? 0UL : 250UL); // delay for bigger moves manual_move_start_time = millis() + (move_menu_scale < 0.99 ? 0UL : 250UL); // delay for bigger moves
manual_move_axis = (int8_t)axis; manual_move_axis = (int8_t)axis;
} }
@ -2830,6 +2828,7 @@ void kill_screen(const char* lcd_msg) {
if (encoderPosition && !processing_manual_move) { if (encoderPosition && !processing_manual_move) {
gcode.refresh_cmd_timeout(); gcode.refresh_cmd_timeout();
// Start with no limits to movement
float min = current_position[axis] - 1000, float min = current_position[axis] - 1000,
max = current_position[axis] + 1000; max = current_position[axis] + 1000;
@ -2867,7 +2866,7 @@ void kill_screen(const char* lcd_msg) {
// This assumes the center is 0,0 // This assumes the center is 0,0
#if ENABLED(DELTA) #if ENABLED(DELTA)
if (axis != Z_AXIS) { if (axis != Z_AXIS) {
max = SQRT(sq((float)(DELTA_PRINTABLE_RADIUS)) - sq(current_position[Y_AXIS - axis])); max = SQRT(sq((float)(DELTA_PRINTABLE_RADIUS)) - sq(current_position[Y_AXIS - axis])); // (Y_AXIS - axis) == the other axis
min = -max; min = -max;
} }
#endif #endif
@ -3131,7 +3130,7 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_filament_menu); MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_filament_menu);
#if HAS_LCD_CONTRAST #if HAS_LCD_CONTRAST
MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, (int16_t*)&lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true); MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, &lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true);
#endif #endif
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu); MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu);
@ -3724,7 +3723,7 @@ void kill_screen(const char* lcd_msg) {
lcd_goto_screen(lcd_sdcard_menu, last_sdfile_encoderPosition); lcd_goto_screen(lcd_sdcard_menu, last_sdfile_encoderPosition);
defer_return_to_status = true; defer_return_to_status = true;
last_sdfile_encoderPosition == 0xFFFF; last_sdfile_encoderPosition = 0xFFFF;
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
lcd_update(); lcd_update();
@ -3749,7 +3748,6 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir); MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir);
} }
if (fileCnt) {
for (uint16_t i = 0; i < fileCnt; i++) { for (uint16_t i = 0; i < fileCnt; i++) {
if (_menuLineNr == _thisItemNr) { if (_menuLineNr == _thisItemNr) {
const uint16_t nr = const uint16_t nr =
@ -3773,7 +3771,6 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM_DUMMY(); MENU_ITEM_DUMMY();
} }
} }
}
END_MENU(); END_MENU();
} }
@ -4476,13 +4473,14 @@ void lcd_init() {
lcd_implementation_init(); lcd_implementation_init();
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
#if BUTTON_EXISTS(EN1) #if BUTTON_EXISTS(EN1)
SET_INPUT_PULLUP(BTN_EN1); SET_INPUT_PULLUP(BTN_EN1);
#endif #endif
#if BUTTON_EXISTS(EN2) #if BUTTON_EXISTS(EN2)
SET_INPUT_PULLUP(BTN_EN2); SET_INPUT_PULLUP(BTN_EN2);
#endif #endif
#if BUTTON_EXISTS(ENC) #if BUTTON_EXISTS(ENC)
SET_INPUT_PULLUP(BTN_ENC); SET_INPUT_PULLUP(BTN_ENC);
#endif #endif
@ -4684,7 +4682,7 @@ void lcd_update() {
#endif #endif
bool encoderPastThreshold = (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP); const bool encoderPastThreshold = (abs(encoderDiff) >= ENCODER_PULSES_PER_STEP);
if (encoderPastThreshold || lcd_clicked) { if (encoderPastThreshold || lcd_clicked) {
if (encoderPastThreshold) { if (encoderPastThreshold) {
int32_t encoderMultiplier = 1; int32_t encoderMultiplier = 1;
@ -4979,11 +4977,6 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
if (BUTTON_PRESSED(ENC)) newbutton |= EN_C; if (BUTTON_PRESSED(ENC)) newbutton |= EN_C;
#endif #endif
buttons = newbutton;
#if ENABLED(LCD_HAS_SLOW_BUTTONS)
buttons |= slow_buttons;
#endif
// //
// Directional buttons // Directional buttons
// //
@ -5032,6 +5025,11 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
#endif // LCD_HAS_DIRECTIONAL_BUTTONS #endif // LCD_HAS_DIRECTIONAL_BUTTONS
buttons = newbutton;
#if ENABLED(LCD_HAS_SLOW_BUTTONS)
buttons |= slow_buttons;
#endif
#if ENABLED(ADC_KEYPAD) #if ENABLED(ADC_KEYPAD)
uint8_t newbutton_reprapworld_keypad = 0; uint8_t newbutton_reprapworld_keypad = 0;
@ -5107,6 +5105,10 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION) #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
bool is_lcd_clicked() { return LCD_CLICKED; } bool is_lcd_clicked() { return LCD_CLICKED; }
void wait_for_release() {
while (is_lcd_clicked()) safe_delay(50);
safe_delay(50);
}
#endif #endif
#endif // ULTIPANEL #endif // ULTIPANEL

View file

@ -222,6 +222,7 @@
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION) #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
bool is_lcd_clicked(); bool is_lcd_clicked();
void wait_for_release();
#endif #endif
#else // no LCD #else // no LCD

View file

@ -1527,7 +1527,7 @@ void MarlinSettings::reset() {
* *
* Unless specifically disabled, M503 is available even without EEPROM * Unless specifically disabled, M503 is available even without EEPROM
*/ */
void MarlinSettings::report(bool forReplay) { void MarlinSettings::report(const bool forReplay) {
/** /**
* Announce current units, in case inches are being displayed * Announce current units, in case inches are being displayed

View file

@ -52,10 +52,10 @@ class MarlinSettings {
#endif #endif
#if DISABLED(DISABLE_M503) #if DISABLED(DISABLE_M503)
static void report(bool forReplay=false); static void report(const bool forReplay=false);
#else #else
FORCE_INLINE FORCE_INLINE
static void report(bool forReplay=false) { UNUSED(forReplay); } static void report(const bool forReplay=false) { UNUSED(forReplay); }
#endif #endif
private: private:

View file

@ -135,15 +135,20 @@ float Planner::min_feedrate_mm_s,
Planner::inverse_z_fade_height, Planner::inverse_z_fade_height,
Planner::last_fade_z; Planner::last_fade_z;
#endif #endif
#else
constexpr bool Planner::leveling_active;
#endif #endif
#if ENABLED(SKEW_CORRECTION) #if ENABLED(SKEW_CORRECTION)
#if ENABLED(SKEW_CORRECTION_GCODE) #if ENABLED(SKEW_CORRECTION_GCODE)
// Initialized by settings.load()
float Planner::xy_skew_factor; float Planner::xy_skew_factor;
#if ENABLED(SKEW_CORRECTION_FOR_Z) #else
float Planner::xz_skew_factor, Planner::yz_skew_factor; constexpr float Planner::xy_skew_factor;
#endif #endif
#if ENABLED(SKEW_CORRECTION_FOR_Z) && ENABLED(SKEW_CORRECTION_GCODE)
float Planner::xz_skew_factor, Planner::yz_skew_factor;
#else
constexpr float Planner::xz_skew_factor, Planner::yz_skew_factor;
#endif #endif
#endif #endif

View file

@ -94,21 +94,16 @@ block_t* Stepper::current_block = NULL; // A pointer to the block currently bei
// private: // private:
uint8_t Stepper::last_direction_bits = 0; // The next stepping-bits to be output uint8_t Stepper::last_direction_bits = 0; // The next stepping-bits to be output
uint16_t Stepper::cleaning_buffer_counter = 0; int16_t Stepper::cleaning_buffer_counter = 0;
#if ENABLED(X_DUAL_ENDSTOPS) #if ENABLED(X_DUAL_ENDSTOPS)
bool Stepper::locked_x_motor = false; bool Stepper::locked_x_motor = false, Stepper::locked_x2_motor = false;
bool Stepper::locked_x2_motor = false;
#endif #endif
#if ENABLED(Y_DUAL_ENDSTOPS) #if ENABLED(Y_DUAL_ENDSTOPS)
bool Stepper::locked_y_motor = false; bool Stepper::locked_y_motor = false, Stepper::locked_y2_motor = false;
bool Stepper::locked_y2_motor = false;
#endif #endif
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
bool Stepper::locked_z_motor = false; bool Stepper::locked_z_motor = false, Stepper::locked_z2_motor = false;
bool Stepper::locked_z2_motor = false;
#endif #endif
long Stepper::counter_X = 0, long Stepper::counter_X = 0,
@ -341,9 +336,7 @@ HAL_STEP_TIMER_ISR {
void Stepper::isr() { void Stepper::isr() {
hal_timer_t ocr_val; #define ENDSTOP_NOMINAL_OCR_VAL 1500 * HAL_TICKS_PER_US // Check endstops every 1.5ms to guarantee two stepper ISRs within 5ms for BLTouch
#define ENDSTOP_NOMINAL_OCR_VAL 1500 * HAL_TICKS_PER_US // check endstops every 1.5ms to guarantee two stepper ISRs within 5ms for BLTouch
#define OCR_VAL_TOLERANCE 500 * HAL_TICKS_PER_US // First max delay is 2.0ms, last min delay is 0.5ms, all others 1.5ms #define OCR_VAL_TOLERANCE 500 * HAL_TICKS_PER_US // First max delay is 2.0ms, last min delay is 0.5ms, all others 1.5ms
#if DISABLED(LIN_ADVANCE) #if DISABLED(LIN_ADVANCE)
@ -355,6 +348,7 @@ void Stepper::isr() {
#endif #endif
#endif #endif
hal_timer_t ocr_val;
static uint32_t step_remaining = 0; // SPLIT function always runs. This allows 16 bit timers to be static uint32_t step_remaining = 0; // SPLIT function always runs. This allows 16 bit timers to be
// used to generate the stepper ISR. // used to generate the stepper ISR.
#define SPLIT(L) do { \ #define SPLIT(L) do { \
@ -367,18 +361,15 @@ void Stepper::isr() {
ocr_val = L;\ ocr_val = L;\
}while(0) }while(0)
// Time remaining before the next step?
if (step_remaining) { if (step_remaining) {
if (ENDSTOPS_ENABLED)
endstops.update();
if (step_remaining > ENDSTOP_NOMINAL_OCR_VAL) {
step_remaining -= ENDSTOP_NOMINAL_OCR_VAL;
ocr_val = ENDSTOP_NOMINAL_OCR_VAL;
}
else {
ocr_val = step_remaining;
step_remaining = 0; // last one before the ISR that does the step
}
// Make sure endstops are updated
if (ENDSTOPS_ENABLED) endstops.update();
// Next ISR either for endstops or stepping
ocr_val = step_remaining <= ENDSTOP_NOMINAL_OCR_VAL ? step_remaining : ENDSTOP_NOMINAL_OCR_VAL;
step_remaining -= ocr_val;
_NEXT_ISR(ocr_val); _NEXT_ISR(ocr_val);
#if DISABLED(LIN_ADVANCE) #if DISABLED(LIN_ADVANCE)
@ -393,16 +384,22 @@ void Stepper::isr() {
return; return;
} }
//
// When cleaning, discard the current block and run fast
//
if (cleaning_buffer_counter) { if (cleaning_buffer_counter) {
--cleaning_buffer_counter; if (cleaning_buffer_counter < 0)
current_block = NULL; ++cleaning_buffer_counter; // Count up for endstop hit
planner.discard_current_block(); else {
--cleaning_buffer_counter; // Count down for abort print
#ifdef SD_FINISHED_RELEASECOMMAND #ifdef SD_FINISHED_RELEASECOMMAND
if (!cleaning_buffer_counter && (SD_FINISHED_STEPPERRELEASE)) enqueue_and_echo_commands_P(PSTR(SD_FINISHED_RELEASECOMMAND)); if (!cleaning_buffer_counter && (SD_FINISHED_STEPPERRELEASE)) enqueue_and_echo_commands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
#endif #endif
}
current_block = NULL;
planner.discard_current_block();
_NEXT_ISR(HAL_STEPPER_TIMER_RATE / 10000); // Run at max speed - 10 KHz _NEXT_ISR(HAL_STEPPER_TIMER_RATE / 10000); // Run at max speed - 10 KHz
HAL_ENABLE_ISRs(); // re-enable ISRs HAL_ENABLE_ISRs(); // Re-enable ISRs
return; return;
} }

View file

@ -80,7 +80,7 @@ class Stepper {
private: private:
static uint8_t last_direction_bits; // The next stepping-bits to be output static uint8_t last_direction_bits; // The next stepping-bits to be output
static uint16_t cleaning_buffer_counter; static int16_t cleaning_buffer_counter;
#if ENABLED(X_DUAL_ENDSTOPS) #if ENABLED(X_DUAL_ENDSTOPS)
static bool locked_x_motor, locked_x2_motor; static bool locked_x_motor, locked_x2_motor;