Danish up to date (18 Aug 2016)

This commit is contained in:
Bo Herrmannsen 2016-08-15 13:26:32 +02:00 committed by Scott Lahteine
parent 0c892357a7
commit d2ae5b00d9

View file

@ -39,19 +39,19 @@
#define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters
#define MSG_MAIN "Menu"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Slå alle steppere fra"
#define MSG_DISABLE_STEPPERS "Slå alle steppere fra"
#define MSG_AUTO_HOME "Auto Home" // G28
#define MSG_AUTO_HOME_X "Home X"
#define MSG_AUTO_HOME_Y "Home Y"
#define MSG_AUTO_HOME_Z "Home Z"
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
#define MSG_LEVEL_BED_WAITING "Tryk for at starte bed level"
#define MSG_LEVEL_BED_NEXT_POINT "Næste punkt"
#define MSG_LEVEL_BED_DONE "Bed level er færdig!"
#define MSG_LEVEL_BED_WAITING "Klik når du er klar"
#define MSG_LEVEL_BED_NEXT_POINT "Næste punkt"
#define MSG_LEVEL_BED_DONE "Bed level er færdig!"
#define MSG_LEVEL_BED_CANCEL "Annuller bed level"
#define MSG_SET_HOME_OFFSETS "Sæt forskyding af home"
#define MSG_HOME_OFFSETS_APPLIED "Forskydninger af home pos. er tilføjet"
#define MSG_SET_ORIGIN "Sæt origin"
#define MSG_SET_HOME_OFFSETS "Sæt forsk. af home"
#define MSG_HOME_OFFSETS_APPLIED "Forsk. er nu aktiv"
#define MSG_SET_ORIGIN "Sæt origin"
#define MSG_PREHEAT_1 "Forvarm PLA"
#define MSG_PREHEAT_1_N "Forvarm PLA "
#define MSG_PREHEAT_1_ALL "Forvarm PLA Alle"
@ -62,9 +62,9 @@
#define MSG_PREHEAT_2_ALL "Forvarm ABS Alle"
#define MSG_PREHEAT_2_BEDONLY "Forvarm ABS Bed"
#define MSG_PREHEAT_2_SETTINGS "Forvarm ABS conf"
#define MSG_COOLDOWN "Afkøl"
#define MSG_SWITCH_PS_ON "Slå strøm til"
#define MSG_SWITCH_PS_OFF "Slå strøm fra"
#define MSG_COOLDOWN "Afkøl"
#define MSG_SWITCH_PS_ON "Slå strøm til"
#define MSG_SWITCH_PS_OFF "Slå strøm fra"
#define MSG_EXTRUDE "Extruder"
#define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "Flyt akser"
@ -79,8 +79,9 @@
#define MSG_SPEED "Hastighed"
#define MSG_BED_Z "Plade Z"
#define MSG_NOZZLE "Dyse"
#define MSG_BED "Plade"
#define MSG_FAN_SPEED "Blæser hastighed"
#define MSG_FAN_SPEED "Blæser hastighed"
#define MSG_FLOW "Flow"
#define MSG_CONTROL "Kontrol"
#define MSG_MIN " \002 Min"
@ -93,6 +94,7 @@
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_SELECT "Vælg"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
@ -108,7 +110,7 @@
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm"
#define MSG_TEMPERATURE "Temperatur"
#define MSG_MOTION "Bevægelse"
#define MSG_MOTION "Bevægelse"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
@ -117,24 +119,24 @@
#define MSG_LOAD_EPROM "Hent fra EEPROM"
#define MSG_RESTORE_FAILSAFE "Gendan failsafe"
#define MSG_REFRESH "Genopfrisk"
#define MSG_WATCH "Info skærm"
#define MSG_WATCH "Info skærm"
#define MSG_PREPARE "Forbered"
#define MSG_TUNE "Tune"
#define MSG_PAUSE_PRINT "Pause printet"
#define MSG_RESUME_PRINT "Forsæt printet"
#define MSG_RESUME_PRINT "Forsæt printet"
#define MSG_STOP_PRINT "Stop printet"
#define MSG_CARD_MENU "Print fra SD"
#define MSG_NO_CARD "Intet SD kort"
#define MSG_DWELL "Dvale..."
#define MSG_USERWAIT "Venter på bruger..."
#define MSG_RESUMING "Forsætter printet"
#define MSG_USERWAIT "Venter på bruger..."
#define MSG_RESUMING "Forsætter printet"
#define MSG_PRINT_ABORTED "Print annulleret"
#define MSG_NO_MOVE "Ingen bevægelse."
#define MSG_KILLED "DRÆBT. "
#define MSG_NO_MOVE "Ingen bevægelse."
#define MSG_KILLED "DRÆBT. "
#define MSG_STOPPED "STOPPET. "
#define MSG_CONTROL_RETRACT "Tilbagetræk mm"
#define MSG_CONTROL_RETRACT "Tilbagetræk mm"
#define MSG_CONTROL_RETRACT_SWAP "Skift Re.mm"
#define MSG_CONTROL_RETRACTF "Tilbagetræk V"
#define MSG_CONTROL_RETRACTF "Tilbagetræk V"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
@ -145,19 +147,24 @@
#define MSG_CNG_SDCARD "Skift SD kort"
#define MSG_ZPROBE_OUT "Probe udenfor plade"
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST "first"
#define MSG_FIRST "først"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_HEATING_FAILED_LCD "Opvarmning mislykkedes"
#define MSG_HEATING_FAILED_LCD "Opvarmning fejlet"
#define MSG_ERR_REDUNDANT_TEMP "Fejl: reserve temp"
#define MSG_THERMAL_RUNAWAY "Temp løber løbsk"
#define MSG_ERR_MAXTEMP "Fejl: Maks temp"
#define MSG_ERR_MINTEMP "Fejl: Min temp"
#define MSG_ERR_MAXTEMP_BED "Fejl: Maks Plsde temp"
#define MSG_ERR_MINTEMP_BED "Fejl: Min Plade temp"
#define MSG_THERMAL_RUNAWAY "Temp løber løbsk"
#define MSG_ERR_MAXTEMP "Fejl: MAKSTEMP"
#define MSG_ERR_MINTEMP "Fejl: MINTEMP"
#define MSG_ERR_MAXTEMP_BED "Fejl: MAKSTEMP PLADE"
#define MSG_ERR_MINTEMP_BED "Fejl: MINTEMP PLADE"
#define MSG_HALTED "PRINTER HALTED"
#define MSG_PLEASE_RESET "Reset venligst"
#define MSG_SHORT_DAY "d" // One character only
#define MSG_SHORT_HOUR "h" // One character only
#define MSG_SHORT_MINUTE "m" // One character only
#define MSG_HEATING "Opvarmer..."
#define MSG_HEATING_COMPLETE "Opvarmet"
#define MSG_BED_HEATING "Opvarmer plade"
@ -168,4 +175,60 @@
#define MSG_DELTA_CALIBRATE_Z "Kalibrer Z"
#define MSG_DELTA_CALIBRATE_CENTER "Kalibrerings Center"
#define MSG_INFO_MENU "Om Printer"
#define MSG_INFO_PRINTER_MENU "Printer Info"
#define MSG_INFO_STATS_MENU "Printer Stat."
#define MSG_INFO_BOARD_MENU "Board Info"
#define MSG_INFO_THERMISTOR_MENU "Thermistors"
#define MSG_INFO_EXTRUDERS "Extrudere"
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocol"
#if LCD_WIDTH > 19
#define MSG_INFO_PRINT_COUNT "Antal Print"
#define MSG_INFO_COMPLETED_PRINTS "Færdige"
#define MSG_INFO_PRINT_TIME "Total print tid"
#define MSG_INFO_PRINT_LONGEST "Længste print tid"
#define MSG_INFO_PRINT_FILAMENT "Total extruderet"
#else
#define MSG_INFO_PRINT_COUNT "Prints"
#define MSG_INFO_COMPLETED_PRINTS "Færdige"
#define MSG_INFO_PRINT_TIME "Total"
#define MSG_INFO_PRINT_LONGEST "Længste"
#define MSG_INFO_PRINT_FILAMENT "Extruderet"
#endif
#define MSG_INFO_MIN_TEMP "Min Temp"
#define MSG_INFO_MAX_TEMP "Max Temp"
#define MSG_INFO_PSU "Strømforsyning"
#define MSG_FILAMENT_CHANGE_HEADER "SKIFT FILAMENT"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "SKIFTE MULIGHEDER:"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extruder mere"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "forsæt print"
#if LCD_HEIGHT >= 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Vent på"
#define MSG_FILAMENT_CHANGE_INIT_2 "skift af "
#define MSG_FILAMENT_CHANGE_INIT_3 "filament"
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Vent på"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament tømning"
#define MSG_FILAMENT_CHANGE_INSERT_1 "indsæt filament"
#define MSG_FILAMENT_CHANGE_INSERT_2 "og tryk for"
#define MSG_FILAMENT_CHANGE_INSERT_3 "at fortsætte..."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Vent på"
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament fødning"
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Vent på"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrudere"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Vent på at"
#define MSG_FILAMENT_CHANGE_RESUME_2 "print forsætter"
#else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Vent venligst..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Tømmer..."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Indsæt og klik"
#define MSG_FILAMENT_CHANGE_LOAD_1 "Føder..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extrudere..."
#define MSG_FILAMENT_CHANGE_RESUME_1 "Fortsætter..."
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_DA_H