Set flags for RAMPS "type" in pins.h

This commit is contained in:
Scott Lahteine 2016-07-30 03:07:20 -07:00
parent 223b7e473f
commit d3b713cebc
8 changed files with 39 additions and 87 deletions

View file

@ -42,12 +42,34 @@
#elif MB(RAMPS_OLD)
#include "pins_RAMPS_OLD.h"
#elif MB(RAMPS_13_EFB)
#include "pins_RAMPS_13_EFB.h"
#elif MB(RAMPS_13_EEB) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF) || MB(RAMPS_13_SF)
#define IS_RAMPS_EFB
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_13_EEB)
#define IS_RAMPS_EEB
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_13_EFF)
#define IS_RAMPS_EFF
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_13_EEF)
#define IS_RAMPS_EEF
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_13_SF)
#define IS_RAMPS_SF
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_14_EFB)
#include "pins_RAMPS_14_EFB.h"
#elif MB(RAMPS_14_EEB) || MB(RAMPS_14_EFF) || MB(RAMPS_14_EEF) || MB(RAMPS_14_SF)
#define IS_RAMPS_EFB
#include "pins_RAMPS_14.h"
#elif MB(RAMPS_14_EEB)
#define IS_RAMPS_EEB
#include "pins_RAMPS_14.h"
#elif MB(RAMPS_14_EFF)
#define IS_RAMPS_EFF
#include "pins_RAMPS_14.h"
#elif MB(RAMPS_14_EEF)
#define IS_RAMPS_EEF
#include "pins_RAMPS_14.h"
#elif MB(RAMPS_14_SF)
#define IS_RAMPS_SF
#include "pins_RAMPS_14.h"
#elif MB(GEN6)
#include "pins_GEN6.h"

View file

@ -32,7 +32,7 @@
#define HI_VOLT_PIN_D 7
#include "pins_RAMPS_14_EFB.h"
#include "pins_RAMPS_14.h"
#undef SDPOWER
#define SDPOWER 1

View file

@ -37,7 +37,7 @@
#define HI_VOLT_PIN_D 7
#include "pins_RAMPS_14_EFB.h"
#include "pins_RAMPS_14.h"
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
/**

View file

@ -32,4 +32,4 @@
#define HI_VOLT_PIN_D 7
#include "pins_RAMPS_14_EFB.h"
#include "pins_RAMPS_14.h"

View file

@ -1,32 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino Mega with RAMPS v1.3 pin assignments
*
* RAMPS_13_EFB (Extruder, Fan, Bed)
*/
#define BOARD_NAME "RAMPS 1.3 EFB"
#define IS_RAMPS_13
#include "pins_RAMPS_14_EFB.h"

View file

@ -151,30 +151,25 @@
#define HI_VOLT_PIN_A 10
#endif
#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
#define HEATER_0_PIN HI_VOLT_PIN_A
#define FAN_PIN HI_VOLT_PIN_B
#define HEATER_BED_PIN HI_VOLT_PIN_C
#if EXTRUDERS == 1
#define FAN1_PIN HI_VOLT_PIN_D
#else
#define HEATER_1_PIN HI_VOLT_PIN_D
#endif
#elif MB(RAMPS_13_EEF) || MB(RAMPS_14_EEF) // Hotend, Hotend, Fan
#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan
#define HEATER_0_PIN HI_VOLT_PIN_A
#define HEATER_1_PIN HI_VOLT_PIN_B
#define FAN_PIN HI_VOLT_PIN_C
#elif MB(RAMPS_13_EEB) || MB(RAMPS_14_EEB) // Hotend, Hotend, Bed
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define HEATER_0_PIN HI_VOLT_PIN_A
#define HEATER_1_PIN HI_VOLT_PIN_B
#define HEATER_BED_PIN HI_VOLT_PIN_C
#define FAN_PIN 4 // IO pin. Buffer needed
#elif MB(RAMPS_13_EFF) || MB(RAMPS_14_EFF) // Hotend, Fan, Fan (EFF is reversed?)
#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan (EFF is reversed?)
#define HEATER_0_PIN HI_VOLT_PIN_C
#define FAN_PIN HI_VOLT_PIN_B
#define FAN1_PIN HI_VOLT_PIN_A
#define CONTROLLERFAN_PIN -1
#elif MB(RAMPS_13_SF) || MB(RAMPS_14_SF) // Spindle, Fan
#elif ENABLED(IS_RAMPS_SF) // Spindle, Fan
#define FAN_PIN HI_VOLT_PIN_C
#else // Non-specific are "EFB" by legacy
#define HEATER_0_PIN HI_VOLT_PIN_A

View file

@ -1,34 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino Mega with RAMPS v1.4 pin assignments
*
* RAMPS_14_EFB (Extruder, Fan, Bed)
*/
#ifndef BOARD_NAME
#define BOARD_NAME "RAMPS 1.4 EFB"
#endif
#define IS_RAMPS_EFB
#include "pins_RAMPS_14.h"

View file

@ -30,8 +30,9 @@
#define BOARD_NAME "Sainsmart"
#define HI_VOLT_PIN_A 9
#define HI_VOLT_PIN_B 7 // PART FAN in front of board next to Extruder heat
#define HI_VOLT_PIN_D 10
#define HI_VOLT_PIN_A 9 // E
#define HI_VOLT_PIN_B 7 // F PART FAN in front of board next to Extruder heat
// HI_VOLT_PIN_C 8 // B
#define HI_VOLT_PIN_D 10 // F / E
#include "pins_RAMPS_14_EFB.h"
#include "pins_RAMPS_14.h"