Support for multiple filament runout sensors

This commit is contained in:
Studiodyne 2018-02-18 09:42:09 +01:00 committed by Scott Lahteine
parent 0106c3e476
commit d3ca82d8c2
7 changed files with 98 additions and 41 deletions

View file

@ -852,15 +852,16 @@
#endif #endif
/** /**
* Filament Runout Sensor * Filament Runout Sensors
* A mechanical or opto endstop is used to check for the presence of filament. * Mechanical or opto endstops are used to check for the presence of filament.
* *
* RAMPS-based boards use SERVO3_PIN. * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
* For other boards you may need to define FIL_RUNOUT_PIN. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
* By default the firmware assumes HIGH = has filament, LOW = ran out * By default the firmware assumes HIGH=FILAMENT PRESENT.
*/ */
//#define FILAMENT_RUNOUT_SENSOR //#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.

View file

@ -216,20 +216,6 @@ void setup_killpin() {
#endif #endif
} }
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
void setup_filrunoutpin() {
#if ENABLED(FIL_RUNOUT_PULLUP)
SET_INPUT_PULLUP(FIL_RUNOUT_PIN);
#elif ENABLED(FIL_RUNOUT_PULLDOWN)
SET_INPUT_PULLDOWN(FIL_RUNOUT_PIN);
#else
SET_INPUT(FIL_RUNOUT_PIN);
#endif
}
#endif
void setup_powerhold() { void setup_powerhold() {
#if HAS_SUICIDE #if HAS_SUICIDE
OUT_WRITE(SUICIDE_PIN, HIGH); OUT_WRITE(SUICIDE_PIN, HIGH);
@ -336,11 +322,7 @@ void disable_all_steppers() {
void manage_inactivity(bool ignore_stepper_queue/*=false*/) { void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
if ((IS_SD_PRINTING || print_job_timer.isRunning()) runout.run();
&& READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING
&& thermalManager.targetHotEnoughToExtrude(active_extruder)
)
handle_filament_runout();
#endif #endif
if (commands_in_queue < BUFSIZE) get_available_commands(); if (commands_in_queue < BUFSIZE) get_available_commands();
@ -661,7 +643,7 @@ void setup() {
#endif #endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
setup_filrunoutpin(); runout.setup();
#endif #endif
setup_killpin(); setup_killpin();

View file

@ -500,7 +500,7 @@ void resume_print(const float &load_length/*=0*/, const float &purge_length/*=AD
planner.set_e_position_mm(destination[E_AXIS] = current_position[E_AXIS] = resume_position[E_AXIS]); planner.set_e_position_mm(destination[E_AXIS] = current_position[E_AXIS] = resume_position[E_AXIS]);
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
filament_ran_out = false; runout.reset();
#endif #endif
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)

View file

@ -24,21 +24,39 @@
* feature/runout.cpp - Runout sensor support * feature/runout.cpp - Runout sensor support
*/ */
#include "../inc/MarlinConfig.h" #include "../inc/MarlinConfigPre.h"
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#include "../module/stepper.h" #include "runout.h"
#include "../gcode/queue.h"
bool filament_ran_out = false; FilamentRunoutSensor runout;
void handle_filament_runout() { bool FilamentRunoutSensor::filament_ran_out; // = false;
if (!filament_ran_out) {
filament_ran_out = true; void FilamentRunoutSensor::setup() {
enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT));
stepper.synchronize(); #if ENABLED(FIL_RUNOUT_PULLUP)
} #define INIT_RUNOUT_PIN(P) SET_INPUT_PULLUP(P)
#elif ENABLED(FIL_RUNOUT_PULLDOWN)
#define INIT_RUNOUT_PIN(P) SET_INPUT_PULLDOWN(P)
#else
#define INIT_RUNOUT_PIN(P) SET_INPUT(P)
#endif
INIT_RUNOUT_PIN(FIL_RUNOUT_PIN);
#if NUM_RUNOUT_SENSORS > 1
INIT_RUNOUT_PIN(FIL_RUNOUT2_PIN);
#if NUM_RUNOUT_SENSORS > 2
INIT_RUNOUT_PIN(FIL_RUNOUT3_PIN);
#if NUM_RUNOUT_SENSORS > 3
INIT_RUNOUT_PIN(FIL_RUNOUT4_PIN);
#if NUM_RUNOUT_SENSORS > 4
INIT_RUNOUT_PIN(FIL_RUNOUT5_PIN);
#endif
#endif
#endif
#endif
} }
#endif // FILAMENT_RUNOUT_SENSOR #endif // FILAMENT_RUNOUT_SENSOR

View file

@ -27,8 +27,55 @@
#ifndef _RUNOUT_H_ #ifndef _RUNOUT_H_
#define _RUNOUT_H_ #define _RUNOUT_H_
extern bool filament_ran_out; #include "../sd/cardreader.h"
#include "../module/printcounter.h"
#include "../module/stepper.h"
#include "../gcode/queue.h"
void handle_filament_runout(); #include "../inc/MarlinConfig.h"
class FilamentRunoutSensor {
FilamentRunoutSensor() {}
static bool filament_ran_out;
static void setup();
FORCE_INLINE static reset() { filament_ran_out = false; }
FORCE_INLINE static bool check() {
#if NUM_RUNOUT_SENSORS < 2
// A single sensor applying to all extruders
return READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING;
#else
// Read the sensor for the active extruder
switch (active_extruder) {
case 0: return READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING;
case 1: return READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING;
#if NUM_RUNOUT_SENSORS > 2
case 2: return READ(FIL_RUNOUT3_PIN) == FIL_RUNOUT_INVERTING;
#if NUM_RUNOUT_SENSORS > 3
case 3: return READ(FIL_RUNOUT4_PIN) == FIL_RUNOUT_INVERTING;
#if NUM_RUNOUT_SENSORS > 4
case 4: return READ(FIL_RUNOUT5_PIN) == FIL_RUNOUT_INVERTING;
#endif
#endif
#endif
}
#endif
return false;
}
FORCE_INLINE static void run() {
if ((IS_SD_PRINTING || print_job_timer.isRunning()) && check() && !filament_ran_out) {
filament_ran_out = true;
enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT));
stepper.synchronize();
}
}
};
extern FilamentRunoutSensor runout;
#endif // _RUNOUT_H_ #endif // _RUNOUT_H_

View file

@ -792,7 +792,6 @@
// Sensors // Sensors
#define HAS_FILAMENT_WIDTH_SENSOR (PIN_EXISTS(FILWIDTH)) #define HAS_FILAMENT_WIDTH_SENSOR (PIN_EXISTS(FILWIDTH))
#define HAS_FIL_RUNOUT (PIN_EXISTS(FIL_RUNOUT))
// User Interface // User Interface
#define HAS_HOME (PIN_EXISTS(HOME)) #define HAS_HOME (PIN_EXISTS(HOME))

View file

@ -429,11 +429,21 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
#endif #endif
/** /**
* Filament Runout needs a pin and either SD Support or Auto print start detection * Filament Runout needs one or more pins and either SD Support or Auto print start detection
*/ */
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
#if !HAS_FIL_RUNOUT #if !PIN_EXISTS(FIL_RUNOUT)
#error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN." #error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN."
#elif NUM_RUNOUT_SENSORS > E_STEPPERS
#error "NUM_RUNOUT_SENSORS cannot exceed the number of E steppers."
#elif NUM_RUNOUT_SENSORS > 1 && !PIN_EXISTS(FIL_RUNOUT2)
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 1 requires FIL_RUNOUT2_PIN."
#elif NUM_RUNOUT_SENSORS > 2 && !PIN_EXISTS(FIL_RUNOUT3)
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 2 requires FIL_RUNOUT3_PIN."
#elif NUM_RUNOUT_SENSORS > 3 && !PIN_EXISTS(FIL_RUNOUT4)
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 3 requires FIL_RUNOUT4_PIN."
#elif NUM_RUNOUT_SENSORS > 4 && !PIN_EXISTS(FIL_RUNOUT5)
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 4 requires FIL_RUNOUT5_PIN."
#elif DISABLED(SDSUPPORT) && DISABLED(PRINTJOB_TIMER_AUTOSTART) #elif DISABLED(SDSUPPORT) && DISABLED(PRINTJOB_TIMER_AUTOSTART)
#error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART." #error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART."
#elif DISABLED(ADVANCED_PAUSE_FEATURE) #elif DISABLED(ADVANCED_PAUSE_FEATURE)