Adjust Travis CI tests

This commit is contained in:
Scott Lahteine 2018-10-08 23:03:53 -05:00
parent d6d48e63fb
commit d52deeb15a
7 changed files with 70 additions and 38 deletions

View file

@ -17,8 +17,8 @@ cache:
env: env:
- TEST_PLATFORM="megaatmega2560" - TEST_PLATFORM="megaatmega2560"
- TEST_PLATFORM="LPC1768"
- TEST_PLATFORM="DUE" - TEST_PLATFORM="DUE"
- TEST_PLATFORM="LPC1768"
- TEST_PLATFORM="STM32F1" - TEST_PLATFORM="STM32F1"
- TEST_PLATFORM="teensy35" - TEST_PLATFORM="teensy35"
@ -49,4 +49,4 @@ before_script:
- cat ${TRAVIS_BUILD_DIR}/Marlin/src/inc/_Version.h - cat ${TRAVIS_BUILD_DIR}/Marlin/src/inc/_Version.h
# #
script: script:
- start_tests ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM} - run_tests ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}

View file

@ -1,4 +1,7 @@
#!/usr/bin/env bash #!/usr/bin/env bash
#
# Build tests for DUE (Atmel SAM3X8E ARM Cortex-M3)
#
# exit on first failure # exit on first failure
set -e set -e

View file

@ -1,4 +1,7 @@
#!/usr/bin/env bash #!/usr/bin/env bash
#
# Build tests for LPC1768 (NXP ARM Cortex-M3)
#
# exit on first failure # exit on first failure
set -e set -e

View file

@ -1,4 +1,7 @@
#!/usr/bin/env bash #!/usr/bin/env bash
#
# Build tests for STM32F103RE
#
# exit on first failure # exit on first failure
set -e set -e

View file

@ -1,4 +1,7 @@
#!/usr/bin/env bash #!/usr/bin/env bash
#
# Build tests for AVR
#
# exit on first failure # exit on first failure
set -e set -e
@ -7,11 +10,13 @@ set -e
# Backup pins_RAMPS.h # Backup pins_RAMPS.h
# #
cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
# #
# Build with the default configurations # Build with the default configurations
# #
restore_configs restore_configs
exec_test $1 $2 "Default Configuration" exec_test $1 $2 "Default Configuration"
# #
# Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4 # Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4
# Test a "Fix Mounted" Probe with Safe Homing, some arc options, # Test a "Fix Mounted" Probe with Safe Homing, some arc options,
@ -23,15 +28,18 @@ opt_set TEMP_SENSOR_0 -2
opt_set TEMP_SENSOR_1 1 opt_set TEMP_SENSOR_1 1
opt_set TEMP_SENSOR_BED 1 opt_set TEMP_SENSOR_BED 1
opt_set POWER_SUPPLY 1 opt_set POWER_SUPPLY 1
opt_set GRID_MAX_POINTS_X 16
opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING \ opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING \
REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING \ REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING \
BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR \ BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR \
AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \ SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \
FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING
opt_set GRID_MAX_POINTS_X 16
opt_set_adv FANMUX0_PIN 53 opt_set_adv FANMUX0_PIN 53
exec_test $1 $2 "Extruders(2) MAX6675 Fixed Probe etc" exec_test $1 $2 "RAMPS with 2 extruders, RRDFGSC, Linear ABL, LEDs, and many options"
# #
# Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders # Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders
# #
@ -47,7 +55,8 @@ opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATU
EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
opt_enable_adv USB_FLASH_DRIVE_SUPPORT SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI \ opt_enable_adv USB_FLASH_DRIVE_SUPPORT SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI \
CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION
exec_test $1 $2 "Probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders" exec_test $1 $2 "Azteeg X3 with 5 extruders, RRDFGSC, probeless UBL, Linear Advance, and more"
# #
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language # Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
# #
@ -55,7 +64,8 @@ opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GC
opt_set LCD_LANGUAGE jp-kana opt_set LCD_LANGUAGE jp-kana
opt_disable SEGMENT_LEVELED_MOVES opt_disable SEGMENT_LEVELED_MOVES
opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING BABYSTEP_HOTEND_Z_OFFSET
exec_test $1 $2 "Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language" exec_test $1 $2 "... Sled Z Probe, Skew, UBL Cartesian moves, Japanese, and Z probe BABYSTEPPING"
# #
# Test a Servo Probe # Test a Servo Probe
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES # ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
@ -65,27 +75,24 @@ opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \
AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
opt_set NUM_SERVOS 1 opt_set NUM_SERVOS 1
opt_enable_adv NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET opt_enable_adv NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET
exec_test $1 $2 "Servo Probe with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS etc" exec_test $1 $2 "RAMPS with Servo Probe, 3-Point ABL, DEBUG_LEVELING_FEATURE, EEPROM, G38, and more"
# #
# Test MESH_BED_LEVELING feature, with LCD # Test MESH_BED_LEVELING feature, with LCD
# #
restore_configs restore_configs
opt_enable MESH_BED_LEVELING G26_MESH_EDITING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER opt_enable MESH_BED_LEVELING G26_MESH_EDITING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER
exec_test $1 $2 "MESH_BED_LEVELING feature, with LCD" exec_test $1 $2 "MESH_BED_LEVELING feature, with LCD"
# #
# Test MINIRAMBO for PWM_MOTOR_CURRENT # Test MINIRAMBO with PWM_MOTOR_CURRENT and many features
# PROBE_MANUALLY feature, with LCD support,
# ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
# PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
# Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
# ADVANCED_PAUSE_FEATURE, ADVANCED_PAUSE_CONTINUOUS_PURGE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU,
# EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
# INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
# #
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_MINIRAMBO opt_set MOTHERBOARD BOARD_MINIRAMBO
opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING ULTIMAKERCONTROLLER \ opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING \
EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \ EEPROM_SETTINGS EEPROM_CHITCHAT \
M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR \
INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
ULTIMAKERCONTROLLER SDSUPPORT \ ULTIMAKERCONTROLLER SDSUPPORT \
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS \ opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS \
@ -94,6 +101,7 @@ opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS \
opt_set_adv PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }" opt_set_adv PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }"
opt_set_adv I2C_SLAVE_ADDRESS 63 opt_set_adv I2C_SLAVE_ADDRESS 63
exec_test $1 $2 "MINIRAMBO for PWM_MOTOR_CURRENT etc" exec_test $1 $2 "MINIRAMBO for PWM_MOTOR_CURRENT etc"
# #
# Mixing Extruder with 5 steppers, Cyrillic # Mixing Extruder with 5 steppers, Cyrillic
# #
@ -103,6 +111,7 @@ opt_enable MIXING_EXTRUDER CR10_STOCKDISPLAY
opt_set MIXING_STEPPERS 5 opt_set MIXING_STEPPERS 5
opt_set LCD_LANGUAGE ru opt_set LCD_LANGUAGE ru
exec_test $1 $2 "Mixing Extruder with 5 steppers, Cyrillic" exec_test $1 $2 "Mixing Extruder with 5 steppers, Cyrillic"
# #
# Test DUAL_X_CARRIAGE # Test DUAL_X_CARRIAGE
# #
@ -113,6 +122,7 @@ opt_set TEMP_SENSOR_1 1
opt_enable USE_XMAX_PLUG opt_enable USE_XMAX_PLUG
opt_enable_adv DUAL_X_CARRIAGE opt_enable_adv DUAL_X_CARRIAGE
exec_test $1 $2 "DUAL_X_CARRIAGE" exec_test $1 $2 "DUAL_X_CARRIAGE"
# #
# Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER # Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
# #
@ -121,17 +131,22 @@ exec_test $1 $2 "DUAL_X_CARRIAGE"
#opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 #opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10
#opt_set LCD_FEEDBACK_FREQUENCY_HZ 100 #opt_set LCD_FEEDBACK_FREQUENCY_HZ 100
#opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER #opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
# #
# Enable COREXY # Enable COREXY
# #
#restore_configs #restore_configs
#opt_enable COREXY #opt_enable COREXY
#exec_test $1 $2 "Stuff" #exec_test $1 $2 "Stuff"
# #
# Test many less common options # Test many less common options
# #
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 -4
opt_set SERVO_DELAY "{ 300, 300, 300 }"
opt_enable COREYX USE_XMAX_PLUG \ opt_enable COREYX USE_XMAX_PLUG \
REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT \ REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT \
FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR \ FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR \
@ -140,16 +155,13 @@ opt_enable COREYX USE_XMAX_PLUG \
opt_set_adv FAN_MIN_PWM 50 opt_set_adv FAN_MIN_PWM 50
opt_set_adv FAN_KICKSTART_TIME 100 opt_set_adv FAN_KICKSTART_TIME 100
opt_set_adv XY_FREQUENCY_LIMIT 15 opt_set_adv XY_FREQUENCY_LIMIT 15
opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \ opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK \ ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK \
VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \ VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS \ EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS \
MENU_ADDAUTOSTART SDCARD_SORT_ALPHA MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 -4
opt_set SERVO_DELAY "{ 300, 300, 300 }"
exec_test $1 $2 "Many less common options" exec_test $1 $2 "Many less common options"
#
######## Other Standard LCD/Panels ############## ######## Other Standard LCD/Panels ##############
# #
# ULTRA_LCD # ULTRA_LCD
@ -189,12 +201,6 @@ exec_test $1 $2 "Many less common options"
#opt_set_adv SDSORT_CACHE_NAMES true #opt_set_adv SDSORT_CACHE_NAMES true
#exec_test $1 $2 "Stuff" #exec_test $1 $2 "Stuff"
# #
# Test a full-featured CR-10S config
#
use_example_configs Creality/CR-10S
opt_enable SHOW_CUSTOM_BOOTSCREEN
exec_test $1 $2 "Full-featured CR-10S config"
#
# REPRAPWORLD_KEYPAD # REPRAPWORLD_KEYPAD
# #
# Cant find configuration details to get it to compile # Cant find configuration details to get it to compile
@ -207,7 +213,7 @@ exec_test $1 $2 "Full-featured CR-10S config"
#restore_configs #restore_configs
#opt_enable RA_CONTROL_PANEL PINS_DEBUGGING #opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
#exec_test $1 $2 "Stuff" #exec_test $1 $2 "Stuff"
#
######## I2C LCD/PANELS ############## ######## I2C LCD/PANELS ##############
# #
# !!!ATTENTION!!! # !!!ATTENTION!!!
@ -237,6 +243,7 @@ exec_test $1 $2 "Full-featured CR-10S config"
#restore_configs #restore_configs
#opt_enable LCM1602 #opt_enable LCM1602
#exec_test $1 $2 "Stuff" #exec_test $1 $2 "Stuff"
# #
# Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER # Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
# #
@ -247,10 +254,15 @@ exec_test $1 $2 "Full-featured CR-10S config"
#restore_configs #restore_configs
#opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT #opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
#for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; exec_test $1 $2 "Stuff"; done #for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; exec_test $1 $2 "Stuff"; done
#
#
######## Example Configurations ############## ######## Example Configurations ##############
# #
# Test a full-featured CR-10S config
#
use_example_configs Creality/CR-10S
opt_enable SHOW_CUSTOM_BOOTSCREEN
exec_test $1 $2 "Full-featured CR-10S config"
#
# BQ Hephestos 2 # BQ Hephestos 2
#restore_configs #restore_configs
#use_example_configs Hephestos_2 #use_example_configs Hephestos_2

View file

@ -1,4 +1,7 @@
#!/usr/bin/env bash #!/usr/bin/env bash
#
# run_tests
#
export PATH="$PATH:$( cd "$(dirname "${BASH_SOURCE[0]}")" ; pwd -P )" export PATH="$PATH:$( cd "$(dirname "${BASH_SOURCE[0]}")" ; pwd -P )"
export PATH="$PATH:./buildroot/bin" export PATH="$PATH:./buildroot/bin"
@ -27,7 +30,7 @@ fi
if [[ $2 = "ALL" ]]; then if [[ $2 = "ALL" ]]; then
dir_list=("$(dirname "${BASH_SOURCE[0]}")"/*) dir_list=("$(dirname "${BASH_SOURCE[0]}")"/*)
declare -a tests=(${dir_list[@]/*start_tests/}) declare -a tests=(${dir_list[@]/*run_tests/})
for f in "${tests[@]}"; do for f in "${tests[@]}"; do
env_backup env_backup
testenv=$(basename $f | cut -d"_" -f1) testenv=$(basename $f | cut -d"_" -f1)

View file

@ -1,4 +1,7 @@
#!/usr/bin/env bash #!/usr/bin/env bash
#
# Build tests for Teensy 3.5/3.6 (ARM Cortex-M4)
#
# exit on first failure # exit on first failure
set -e set -e
@ -6,10 +9,8 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36 opt_set MOTHERBOARD BOARD_TEENSY35_36
cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
#
# Test Teensy3.5 with default config
#
exec_test $1 $2 "Teensy3.5 with default config" exec_test $1 $2 "Teensy3.5 with default config"
# #
# Test as many features together as possible # Test as many features together as possible
# #
@ -26,7 +27,8 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT \
opt_enable_adv ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE opt_enable_adv ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE
opt_set_adv I2C_SLAVE_ADDRESS 63 opt_set_adv I2C_SLAVE_ADDRESS 63
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "As many features together as possible" exec_test $1 $2 "Teensy3.5 with many features"
# #
# Test a Sled Z Probe with Linear leveling # Test a Sled Z Probe with Linear leveling
# #
@ -34,6 +36,7 @@ restore_configs
opt_enable EEPROM_SETTINGS \ opt_enable EEPROM_SETTINGS \
Z_PROBE_SLED AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE Z_PROBE_SLED AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE
exec_test $1 $2 "Sled Z Probe with Linear leveling" exec_test $1 $2 "Sled Z Probe with Linear leveling"
# #
# Test a Servo Probe # Test a Servo Probe
# #
@ -48,12 +51,14 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling"
# opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS # opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
# opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES # opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
# exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES" # exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES"
# #
# Test MESH_BED_LEVELING feature, with LCD # Test MESH_BED_LEVELING feature, with LCD
# #
restore_configs restore_configs
opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN MANUAL_BED_LEVELING ULTIMAKERCONTROLLER opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN MANUAL_BED_LEVELING ULTIMAKERCONTROLLER
exec_test $1 $2 "MESH_BED_LEVELING feature, with LCD" exec_test $1 $2 "MESH_BED_LEVELING feature, with LCD"
# #
# Mixing Extruder # Mixing Extruder
# #
@ -61,6 +66,7 @@ restore_configs
opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1
opt_set MIXING_STEPPERS 2 opt_set MIXING_STEPPERS 2
exec_test $1 $2 "Mixing Extruder" exec_test $1 $2 "Mixing Extruder"
# #
# Test SWITCHING_EXTRUDER # Test SWITCHING_EXTRUDER
# #
@ -75,12 +81,14 @@ exec_test $1 $2 "Mixing Extruder"
restore_configs restore_configs
opt_enable COREXY opt_enable COREXY
exec_test $1 $2 "COREXY" exec_test $1 $2 "COREXY"
# #
# Enable COREXZ # Enable COREXZ
# #
restore_configs restore_configs
opt_enable COREXZ opt_enable COREXZ
exec_test $1 $2 "COREXZ" exec_test $1 $2 "COREXZ"
# #
# Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS # Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS
# #