Allows user to set (almost) any PWM frequency (#12638)
This commit is contained in:
Reece Kibble
Scott Lahteine
parent
afbec5ff7e
commit
dbead66988
80 changed files with 2314 additions and 28 deletions
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -35,6 +35,13 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Checks for FAST PWM
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN) && (ENABLED(USE_OCR2A_AS_TOP) && defined(TCCR2))
|
||||
#error "USE_OCR2A_AS_TOP does not apply to devices with a single output TIMER2"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Sanity checks for Spindle / Laser
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -132,6 +132,18 @@ enum WaveGenMode : char {
|
|||
WGM_FAST_PWM_OCRnA // 15 COM OCnA
|
||||
};
|
||||
|
||||
// Wavefore Generation Modes (Timer 2 only)
|
||||
enum WaveGenMode2 : char {
|
||||
WGM2_NORMAL, // 0
|
||||
WGM2_PWM_PC, // 1
|
||||
WGM2_CTC_OCR2A, // 2
|
||||
WGM2_FAST_PWM, // 3
|
||||
WGM2_reserved_1, // 4
|
||||
WGM2_PWM_PC_OCR2A, // 5
|
||||
WGM2_reserved_2, // 6
|
||||
WGM2_FAST_PWM_OCR2A, // 7
|
||||
};
|
||||
|
||||
// Compare Modes
|
||||
enum CompareMode : char {
|
||||
COM_NORMAL, // 0
|
||||
|
|
@ -186,6 +198,11 @@ enum ClockSource2 : char {
|
|||
TCCR##T##B = (TCCR##T##B & ~(0x3 << WGM##T##2)) | (((int(V) >> 2) & 0x3) << WGM##T##2); \
|
||||
}while(0)
|
||||
#define SET_WGM(T,V) _SET_WGM(T,WGM_##V)
|
||||
// Runtime (see Temperature::set_pwm_frequency):
|
||||
#define _SET_WGMnQ(TCCRnQ, V) do{ \
|
||||
*(TCCRnQ)[0] = (*(TCCRnQ)[0] & ~(0x3 << 0)) | (( int(V) & 0x3) << 0); \
|
||||
*(TCCRnQ)[1] = (*(TCCRnQ)[1] & ~(0x3 << 3)) | (((int(V) >> 2) & 0x3) << 3); \
|
||||
}while(0)
|
||||
|
||||
// Set Clock Select bits
|
||||
// Ex: SET_CS3(PRESCALER_64);
|
||||
|
|
@ -211,6 +228,10 @@ enum ClockSource2 : char {
|
|||
#define SET_CS4(V) _SET_CS4(CS_##V)
|
||||
#define SET_CS5(V) _SET_CS5(CS_##V)
|
||||
#define SET_CS(T,V) SET_CS##T(V)
|
||||
// Runtime (see Temperature::set_pwm_frequency)
|
||||
#define _SET_CSn(TCCRnQ, V) do{ \
|
||||
(*(TCCRnQ)[1] = (*(TCCRnQ[1]) & ~(0x7 << 0)) | ((int(V) & 0x7) << 0)); \
|
||||
}while(0)
|
||||
|
||||
// Set Compare Mode bits
|
||||
// Ex: SET_COMS(4,CLEAR_SET,CLEAR_SET,CLEAR_SET);
|
||||
|
|
@ -220,6 +241,22 @@ enum ClockSource2 : char {
|
|||
#define SET_COMB(T,V) SET_COM(T,B,V)
|
||||
#define SET_COMC(T,V) SET_COM(T,C,V)
|
||||
#define SET_COMS(T,V1,V2,V3) do{ SET_COMA(T,V1); SET_COMB(T,V2); SET_COMC(T,V3); }while(0)
|
||||
// Runtime (see Temperature::set_pwm_duty)
|
||||
#define _SET_COMnQ(TCCRnQ, Q, V) do{ \
|
||||
(*(TCCRnQ)[0] = (*(TCCRnQ)[0] & ~(0x3 << (6-2*(Q)))) | (int(V) << (6-2*(Q)))); \
|
||||
}while(0)
|
||||
|
||||
// Set OCRnQ register
|
||||
// Runtime (see Temperature::set_pwm_duty):
|
||||
#define _SET_OCRnQ(OCRnQ, Q, V) do{ \
|
||||
(*(OCRnQ)[(Q)] = (0x0000) | (int(V) & 0xFFFF)); \
|
||||
}while(0)
|
||||
|
||||
// Set ICRn register (one per timer)
|
||||
// Runtime (see Temperature::set_pwm_frequency)
|
||||
#define _SET_ICRn(ICRn, V) do{ \
|
||||
(*(ICRn) = (0x0000) | (int(V) & 0xFFFF)); \
|
||||
}while(0)
|
||||
|
||||
// Set Noise Canceler bit
|
||||
// Ex: SET_ICNC(2,1)
|
||||
|
|
|
|||
|
|
@ -1213,6 +1213,13 @@
|
|||
#error "FAN_MIN_PWM must be less than or equal to FAN_MAX_PWM."
|
||||
#endif
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN) && !defined(FAST_PWM_FAN_FREQUENCY)
|
||||
#define FAST_PWM_FAN_FREQUENCY ((F_CPU) / (2 * 255 * 1)) // Fan frequency default
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Bed Probe dependencies
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -1273,6 +1273,18 @@ void Planner::check_axes_activity() {
|
|||
#if HAS_FAN2
|
||||
thermalManager.soft_pwm_amount_fan[2] = CALC_FAN_SPEED(2);
|
||||
#endif
|
||||
|
||||
#elif ENABLED(FAST_PWM_FAN)
|
||||
#if HAS_FAN0
|
||||
thermalManager.set_pwm_duty(FAN_PIN, CALC_FAN_SPEED(0));
|
||||
#endif
|
||||
#if HAS_FAN1
|
||||
thermalManager.set_pwm_duty(FAN1_PIN, CALC_FAN_SPEED(1));
|
||||
#endif
|
||||
#if HAS_FAN2
|
||||
thermalManager.set_pwm_duty(FAN2_PIN, CALC_FAN_SPEED(2));
|
||||
#endif
|
||||
|
||||
#else
|
||||
#if HAS_FAN0
|
||||
analogWrite(FAN_PIN, CALC_FAN_SPEED(0));
|
||||
|
|
|
|||
|
|
@ -1332,28 +1332,28 @@ void Temperature::init() {
|
|||
#if HAS_FAN0
|
||||
SET_OUTPUT(FAN_PIN);
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
setPwmFrequency(FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||
set_pwm_frequency(FAN_PIN, FAST_PWM_FAN_FREQUENCY);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_FAN1
|
||||
SET_OUTPUT(FAN1_PIN);
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
setPwmFrequency(FAN1_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||
set_pwm_frequency(FAN1_PIN, FAST_PWM_FAN_FREQUENCY);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if HAS_FAN2
|
||||
SET_OUTPUT(FAN2_PIN);
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
setPwmFrequency(FAN2_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||
set_pwm_frequency(FAN2_PIN, FAST_PWM_FAN_FREQUENCY);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(USE_CONTROLLER_FAN)
|
||||
SET_OUTPUT(CONTROLLER_FAN_PIN);
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
setPwmFrequency(CONTROLLER_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||
set_pwm_frequency(CONTROLLER_FAN_PIN, FAST_PWM_FAN_FREQUENCY);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
@ -1411,7 +1411,7 @@ void Temperature::init() {
|
|||
#if E0_AUTO_FAN_PIN == FAN1_PIN
|
||||
SET_OUTPUT(E0_AUTO_FAN_PIN);
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
setPwmFrequency(E0_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||
set_pwm_frequency(E0_AUTO_FAN_PIN, FAST_PWM_FAN_FREQUENCY);
|
||||
#endif
|
||||
#else
|
||||
SET_OUTPUT(E0_AUTO_FAN_PIN);
|
||||
|
|
@ -1421,7 +1421,7 @@ void Temperature::init() {
|
|||
#if E1_AUTO_FAN_PIN == FAN1_PIN
|
||||
SET_OUTPUT(E1_AUTO_FAN_PIN);
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
setPwmFrequency(E1_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||
set_pwm_frequency(E1_AUTO_FAN_PIN, FAST_PWM_FAN_FREQUENCY);
|
||||
#endif
|
||||
#else
|
||||
SET_OUTPUT(E1_AUTO_FAN_PIN);
|
||||
|
|
@ -1431,7 +1431,7 @@ void Temperature::init() {
|
|||
#if E2_AUTO_FAN_PIN == FAN1_PIN
|
||||
SET_OUTPUT(E2_AUTO_FAN_PIN);
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
setPwmFrequency(E2_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||
set_pwm_frequency(E2_AUTO_FAN_PIN, FAST_PWM_FAN_FREQUENCY);
|
||||
#endif
|
||||
#else
|
||||
SET_OUTPUT(E2_AUTO_FAN_PIN);
|
||||
|
|
@ -1441,7 +1441,7 @@ void Temperature::init() {
|
|||
#if E3_AUTO_FAN_PIN == FAN1_PIN
|
||||
SET_OUTPUT(E3_AUTO_FAN_PIN);
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
setPwmFrequency(E3_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||
set_pwm_frequency(E3_AUTO_FAN_PIN, FAST_PWM_FAN_FREQUENCY);
|
||||
#endif
|
||||
#else
|
||||
SET_OUTPUT(E3_AUTO_FAN_PIN);
|
||||
|
|
@ -1451,7 +1451,7 @@ void Temperature::init() {
|
|||
#if E4_AUTO_FAN_PIN == FAN1_PIN
|
||||
SET_OUTPUT(E4_AUTO_FAN_PIN);
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
setPwmFrequency(E4_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||
set_pwm_frequency(E4_AUTO_FAN_PIN, FAST_PWM_FAN_FREQUENCY);
|
||||
#endif
|
||||
#else
|
||||
SET_OUTPUT(E4_AUTO_FAN_PIN);
|
||||
|
|
@ -1461,7 +1461,7 @@ void Temperature::init() {
|
|||
#if E5_AUTO_FAN_PIN == FAN1_PIN
|
||||
SET_OUTPUT(E5_AUTO_FAN_PIN);
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
setPwmFrequency(E5_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||
set_pwm_frequency(E5_AUTO_FAN_PIN, FAST_PWM_FAN_FREQUENCY);
|
||||
#endif
|
||||
#else
|
||||
SET_OUTPUT(E5_AUTO_FAN_PIN);
|
||||
|
|
@ -1471,7 +1471,7 @@ void Temperature::init() {
|
|||
#if CHAMBER_AUTO_FAN_PIN == FAN1_PIN
|
||||
SET_OUTPUT(CHAMBER_AUTO_FAN_PIN);
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
setPwmFrequency(CHAMBER_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||
set_pwm_frequency(CHAMBER_AUTO_FAN_PIN, FAST_PWM_FAN_FREQUENCY);
|
||||
#endif
|
||||
#else
|
||||
SET_OUTPUT(CHAMBER_AUTO_FAN_PIN);
|
||||
|
|
@ -1566,43 +1566,233 @@ void Temperature::init() {
|
|||
#endif
|
||||
}
|
||||
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
|
||||
void Temperature::setPwmFrequency(const pin_t pin, int val) {
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
Temperature::Timer Temperature::get_pwm_timer(pin_t pin) {
|
||||
#if defined(ARDUINO) && !defined(ARDUINO_ARCH_SAM)
|
||||
val &= 0x07;
|
||||
uint8_t q = 0;
|
||||
switch (digitalPinToTimer(pin)) {
|
||||
// Protect reserved timers (TIMER0 & TIMER1)
|
||||
#ifdef TCCR0A
|
||||
#if !AVR_AT90USB1286_FAMILY
|
||||
case TIMER0A:
|
||||
#endif
|
||||
case TIMER0B: //_SET_CS(0, val);
|
||||
break;
|
||||
case TIMER0B:
|
||||
#endif
|
||||
#ifdef TCCR1A
|
||||
case TIMER1A: case TIMER1B: //_SET_CS(1, val);
|
||||
break;
|
||||
case TIMER1A: case TIMER1B:
|
||||
#endif
|
||||
break;
|
||||
#if defined(TCCR2) || defined(TCCR2A)
|
||||
#ifdef TCCR2
|
||||
case TIMER2:
|
||||
#endif
|
||||
#ifdef TCCR2A
|
||||
case TIMER2A: case TIMER2B:
|
||||
#endif
|
||||
_SET_CS(2, val); break;
|
||||
#endif
|
||||
#ifdef TCCR3A
|
||||
case TIMER3A: case TIMER3B: case TIMER3C: _SET_CS(3, val); break;
|
||||
#endif
|
||||
#ifdef TCCR4A
|
||||
case TIMER4A: case TIMER4B: case TIMER4C: _SET_CS(4, val); break;
|
||||
#endif
|
||||
#ifdef TCCR5A
|
||||
case TIMER5A: case TIMER5B: case TIMER5C: _SET_CS(5, val); break;
|
||||
#endif
|
||||
case TIMER2: {
|
||||
Temperature::Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR2, NULL, NULL},
|
||||
/*OCRnQ*/ { (uint16_t*)&OCR2, NULL, NULL},
|
||||
/*ICRn*/ NULL,
|
||||
/*n, q*/ 2, 0
|
||||
};
|
||||
}
|
||||
#elif defined TCCR2A
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
case TIMER2A: break; // protect TIMER2A
|
||||
case TIMER2B: {
|
||||
Temperature::Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR2A, &TCCR2B, NULL},
|
||||
/*OCRnQ*/ { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, NULL},
|
||||
/*ICRn*/ NULL,
|
||||
/*n, q*/ 2, 1
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#else
|
||||
case TIMER2B: q += 1;
|
||||
case TIMER2A: {
|
||||
Temperature::Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR2A, &TCCR2B, NULL},
|
||||
/*OCRnQ*/ { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, NULL},
|
||||
/*ICRn*/ NULL,
|
||||
2, q
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#ifdef TCCR3A
|
||||
case TIMER3C: q += 1;
|
||||
case TIMER3B: q += 1;
|
||||
case TIMER3A: {
|
||||
Temperature::Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR3A, &TCCR3B, &TCCR3C},
|
||||
/*OCRnQ*/ { &OCR3A, &OCR3B, &OCR3C},
|
||||
/*ICRn*/ &ICR3,
|
||||
/*n, q*/ 3, q
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#endif
|
||||
#ifdef TCCR4A
|
||||
case TIMER4C: q += 1;
|
||||
case TIMER4B: q += 1;
|
||||
case TIMER4A: {
|
||||
Temperature::Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR4A, &TCCR4B, &TCCR4C},
|
||||
/*OCRnQ*/ { &OCR4A, &OCR4B, &OCR4C},
|
||||
/*ICRn*/ &ICR4,
|
||||
/*n, q*/ 4, q
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#endif
|
||||
#ifdef TCCR5A
|
||||
case TIMER5C: q += 1;
|
||||
case TIMER5B: q += 1;
|
||||
case TIMER5A: {
|
||||
Temperature::Timer timer = {
|
||||
/*TCCRnQ*/ { &TCCR5A, &TCCR5B, &TCCR5C},
|
||||
/*OCRnQ*/ { &OCR5A, &OCR5B, &OCR5C },
|
||||
/*ICRn*/ &ICR5,
|
||||
/*n, q*/ 5, q
|
||||
};
|
||||
return timer;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
Temperature::Timer timer = {
|
||||
/*TCCRnQ*/ { NULL, NULL, NULL},
|
||||
/*OCRnQ*/ { NULL, NULL, NULL},
|
||||
/*ICRn*/ NULL,
|
||||
0, 0
|
||||
};
|
||||
return timer;
|
||||
#endif // ARDUINO && !ARDUINO_ARCH_SAM
|
||||
}
|
||||
|
||||
void Temperature::set_pwm_frequency(const pin_t pin, int f_desired) {
|
||||
#if defined(ARDUINO) && !defined(ARDUINO_ARCH_SAM)
|
||||
Temperature::Timer timer = get_pwm_timer(pin);
|
||||
if (timer.n == 0) return; // Don't proceed if protected timer or not recognised
|
||||
uint16_t size;
|
||||
if (timer.n == 2) size = 255; else size = 65535;
|
||||
|
||||
uint16_t res = 255; // resolution (TOP value)
|
||||
uint8_t j = 0; // prescaler index
|
||||
uint8_t wgm = 1; // waveform generation mode
|
||||
|
||||
// Calculating the prescaler and resolution to use to achieve closest frequency
|
||||
if (f_desired != 0) {
|
||||
int f = F_CPU/(2*1024*size) + 1; // Initialize frequency as lowest (non-zero) achievable
|
||||
uint16_t prescaler[] = {0, 1, 8, /*TIMER2 ONLY*/32, 64, /*TIMER2 ONLY*/128, 256, 1024};
|
||||
|
||||
// loop over prescaler values
|
||||
for (uint8_t i = 1; i < 8; i++) {
|
||||
uint16_t res_temp_fast = 255, res_temp_phase_correct = 255;
|
||||
if (timer.n == 2) {
|
||||
// No resolution calculation for TIMER2 unless enabled USE_OCR2A_AS_TOP
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
res_temp_fast = (F_CPU / (prescaler[i] * f_desired)) - 1;
|
||||
res_temp_phase_correct = F_CPU / (2 * prescaler[i] * f_desired);
|
||||
#endif
|
||||
}
|
||||
else {
|
||||
// Skip TIMER2 specific prescalers when not TIMER2
|
||||
if (i == 3 || i == 5) continue;
|
||||
res_temp_fast = (F_CPU / (prescaler[i] * f_desired)) - 1;
|
||||
res_temp_phase_correct = F_CPU / (2 * prescaler[i] * f_desired);
|
||||
}
|
||||
|
||||
LIMIT(res_temp_fast, 1u, size);
|
||||
LIMIT(res_temp_phase_correct, 1u, size);
|
||||
// Calculate frequncies of test prescaler and resolution values
|
||||
int f_temp_fast = F_CPU / (prescaler[i] * (1 + res_temp_fast));
|
||||
int f_temp_phase_correct = F_CPU / (2 * prescaler[i] * res_temp_phase_correct);
|
||||
|
||||
// If FAST values are closest to desired f
|
||||
if (ABS(f_temp_fast - f_desired) < ABS(f - f_desired)
|
||||
&& ABS(f_temp_fast - f_desired) <= ABS(f_temp_phase_correct - f_desired)) {
|
||||
// Remember this combination
|
||||
f = f_temp_fast;
|
||||
res = res_temp_fast;
|
||||
j = i;
|
||||
// Set the Wave Generation Mode to FAST PWM
|
||||
if(timer.n == 2){
|
||||
wgm =
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
WGM2_FAST_PWM_OCR2A;
|
||||
#else
|
||||
WGM2_FAST_PWM;
|
||||
#endif
|
||||
}
|
||||
else wgm = WGM_FAST_PWM_ICRn;
|
||||
}
|
||||
// If PHASE CORRECT values are closes to desired f
|
||||
else if (ABS(f_temp_phase_correct - f_desired) < ABS(f - f_desired)) {
|
||||
f = f_temp_phase_correct;
|
||||
res = res_temp_phase_correct;
|
||||
j = i;
|
||||
// Set the Wave Generation Mode to PWM PHASE CORRECT
|
||||
if (timer.n == 2) {
|
||||
wgm =
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
WGM2_PWM_PC_OCR2A;
|
||||
#else
|
||||
WGM2_PWM_PC;
|
||||
#endif
|
||||
}
|
||||
else wgm = WGM_PWM_PC_ICRn;
|
||||
}
|
||||
}
|
||||
}
|
||||
_SET_WGMnQ(timer.TCCRnQ, wgm);
|
||||
_SET_CSn(timer.TCCRnQ, j);
|
||||
|
||||
if (timer.n == 2) {
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
_SET_OCRnQ(timer.OCRnQ, 0, res); // Set OCR2A value (TOP) = res
|
||||
#endif
|
||||
}
|
||||
else {
|
||||
_SET_ICRn(timer.ICRn, res); // Set ICRn value (TOP) = res
|
||||
}
|
||||
#endif // ARDUINO && !ARDUINO_ARCH_SAM
|
||||
}
|
||||
|
||||
void Temperature::set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
|
||||
#if defined(ARDUINO) && !defined(ARDUINO_ARCH_SAM)
|
||||
// If v is 0 or v_size (max), digitalWrite to LOW or HIGH.
|
||||
// Note that digitalWrite also disables pwm output for us (sets COM bit to 0)
|
||||
if (v == 0)
|
||||
digitalWrite(pin, invert);
|
||||
else if (v == v_size)
|
||||
digitalWrite(pin, !invert);
|
||||
else {
|
||||
Temperature::Timer timer = get_pwm_timer(pin);
|
||||
if (timer.n == 0) return; // Don't proceed if protected timer or not recognised
|
||||
// Set compare output mode to CLEAR -> SET or SET -> CLEAR (if inverted)
|
||||
_SET_COMnQ(timer.TCCRnQ, timer.q
|
||||
#ifdef TCCR2
|
||||
+ (timer.q == 2) // COM20 is on bit 4 of TCCR2, thus requires q + 1 in the macro
|
||||
#endif
|
||||
, COM_CLEAR_SET + invert
|
||||
);
|
||||
|
||||
uint16_t top;
|
||||
if (timer.n == 2) { // if TIMER2
|
||||
top =
|
||||
#if ENABLED(USE_OCR2A_AS_TOP)
|
||||
*timer.OCRnQ[0] // top = OCR2A
|
||||
#else
|
||||
255 // top = 0xFF (max)
|
||||
#endif
|
||||
;
|
||||
}
|
||||
else
|
||||
top = *timer.ICRn; // top = ICRn
|
||||
|
||||
_SET_OCRnQ(timer.OCRnQ, timer.q, v * float(top / v_size)); // Scale 8/16-bit v to top value
|
||||
}
|
||||
#endif // ARDUINO && !ARDUINO_ARCH_SAM
|
||||
}
|
||||
|
||||
#endif // FAST_PWM_FAN
|
||||
|
|
|
|||
|
|
@ -266,6 +266,16 @@ class Temperature {
|
|||
soft_pwm_count_fan[FAN_COUNT];
|
||||
#endif
|
||||
|
||||
/**
|
||||
* set_pwm_duty (8-bit AVRs only)
|
||||
* Sets the PWM duty cycle of the provided pin to the provided value
|
||||
* Optionally allows inverting the duty cycle [default = false]
|
||||
* Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
|
||||
#endif
|
||||
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
static volatile int16_t babystepsTodo[3];
|
||||
#endif
|
||||
|
|
@ -735,8 +745,33 @@ class Temperature {
|
|||
|
||||
private:
|
||||
|
||||
/**
|
||||
* (8-bit AVRs only)
|
||||
*
|
||||
* get_pwm_timer
|
||||
* Grabs timer information and registers of the provided pin
|
||||
* returns Timer struct containing this information
|
||||
* Used by set_pwm_frequency, set_pwm_duty
|
||||
*
|
||||
* set_pwm_frequency
|
||||
* Sets the frequency of the timer corresponding to the provided pin
|
||||
* as close as possible to the provided desired frequency. Internally
|
||||
* calculates the required waveform generation mode, prescaler and
|
||||
* resolution values required and sets the timer registers accordingly.
|
||||
* NOTE that the frequency is applied to all pins on the timer (Ex OC3A, OC3B and OC3B)
|
||||
* NOTE that there are limitations, particularly if using TIMER2. (see Configuration_adv.h -> FAST FAN PWM Settings)
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
static void setPwmFrequency(const pin_t pin, int val);
|
||||
typedef struct Timer {
|
||||
volatile uint8_t* TCCRnQ[3]; // max 3 TCCR registers per timer
|
||||
volatile uint16_t* OCRnQ[3]; // max 3 OCR registers per timer
|
||||
volatile uint16_t* ICRn; // max 1 ICR register per timer
|
||||
uint8_t n; // the timer number [0->5]
|
||||
uint8_t q; // the timer output [0->2] (A->C)
|
||||
} Timer;
|
||||
|
||||
static Timer get_pwm_timer(const pin_t pin);
|
||||
static void set_pwm_frequency(const pin_t pin, int f_desired);
|
||||
#endif
|
||||
|
||||
static void set_current_temp_raw();
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -245,6 +245,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
#define FAN_MIN_PWM 45
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
#define FAN_MIN_PWM 64
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -254,6 +254,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -241,6 +241,33 @@
|
|||
//#define FAN_MIN_PWM 50
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
/**
|
||||
* FAST PWM FAN Settings
|
||||
*
|
||||
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
|
||||
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
|
||||
* frequency as close as possible to the desired frequency.
|
||||
*
|
||||
* FAST_PWM_FAN_FREQUENCY [undefined by default]
|
||||
* Set this to your desired frequency.
|
||||
* If left undefined this defaults to F = F_CPU/(2*255*1)
|
||||
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
|
||||
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
|
||||
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
|
||||
*
|
||||
* USE_OCR2A_AS_TOP [undefined by default]
|
||||
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
|
||||
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
|
||||
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
|
||||
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
|
||||
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
|
||||
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
|
||||
*/
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
//#define FAST_PWM_FAN_FREQUENCY 31400
|
||||
//#define USE_OCR2A_AS_TOP
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
/**
|
||||
|
|
|
|||
Reference in a new issue