SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Fix SPI comments, clean up U20 pins (#14700)

Browse source
This commit is contained in:
Tanguy Pruvot 2019-07-22 03:23:41 +02:00 committed by Scott Lahteine
parent 7501e40e0b
commit dca0c3d02a
3 changed files with 32 additions and 34 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
Marlin/src/HAL/HAL_STM32F1/HAL_spi_STM32F1.cpp
View file

@ -80,8 +80,8 @@ void spiBegin() {
*/ */
void spiInit(uint8_t spiRate) { void spiInit(uint8_t spiRate) {
/** /**
* STM32F1 APB1 = 36MHz, APB2 = 72MHz, max SPI speed of this MCU if 18Mhz * STM32F1 APB2 = 72MHz, APB1 = 36MHz, max SPI speed of this MCU if 18Mhz
* STM32F1 has 3 SPI ports, SPI1 in APB1, SPI2/SPI3 in APB2 * STM32F1 has 3 SPI ports, SPI1 in APB2, SPI2/SPI3 in APB1
* so the minimum prescale of SPI1 is DIV4, SPI2/SPI3 is DIV2 * so the minimum prescale of SPI1 is DIV4, SPI2/SPI3 is DIV2
*/ */
#if SPI_DEVICE == 1 #if SPI_DEVICE == 1

58
Marlin/src/pins/stm32/pins_LONGER3D_LK.h
View file

@ -16,34 +16,42 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* ALFAWISE U30 (STM32F103VET6) board pin assignments * Longer3D LK1/LK2 & Alfawise U20/U30 (STM32F103VET6) board pin assignments
*/ */
#if !defined(__STM32F1__) && !defined(STM32F1xx) #if !defined(__STM32F1__) && !defined(STM32F1xx)
#error "Oops! Select a STM32F1 board in 'Tools > Board.'" #error "Oops! Select a STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1 #elif HOTENDS > 1 || E_STEPPERS > 1
#error "LONGER3D only supports 1 hotend / E-stepper. Comment out this line to continue." #error "Longer3D board only supports 1 hotend / E-stepper. Comment out this line to continue."
#endif #endif
#define BOARD_NAME "Longer3D" #define BOARD_NAME "Longer3D"
#define ALFAWISE_UX0 // Common to all Alfawise STM32F1 boards #define ALFAWISE_UX0 // Common to all Longer3D STM32F1 boards (used for Open drain mosfets)
//#define DISABLE_DEBUG // We still want to debug with STLINK...
#define DISABLE_JTAG // We free the jtag pins (PA15) but keep STLINK
// Release PB4 (STEP_X_PIN) from JTAG NRST role. // Release PB4 (STEP_X_PIN) from JTAG NRST role.
//#define DISABLE_DEBUG // > Hobi : We still want to debug with STLINK...
#define DISABLE_JTAG // we free the jtag pins (PA15) but keep STLINK
// //
// Limit Switches // Limit Switches
// //
#define X_STOP_PIN PC1 // pin 16 #define X_MIN_PIN PC1 // pin 16
//#define X_MAX_PIN PC0 // pin 15 Used as filament sensor on Alfawise setup #define X_MAX_PIN PC0 // pin 15 (Filament sensor on Alfawise setup)
#define Y_MIN_PIN PC15 // pin 9 #define Y_MIN_PIN PC15 // pin 9
//#define Y_MAX_PIN PC14 // pin 8 Unused in stock Alfawise setup #define Y_MAX_PIN PC14 // pin 8 (Unused in stock Alfawise setup)
#define Z_MIN_PIN PE6 // pin 5 Standard Endstop or Z_Probe endstop function #define Z_MIN_PIN PE6 // pin 5 Standard Endstop or Z_Probe endstop function
//#define Z_MAX_PIN PE5 // pin 4 Unused in stock Alfawise setup #define Z_MAX_PIN PE5 // pin 4 (Unused in stock Alfawise setup)
// May be used for BLTouch Servo function on older variants (<= V08) // May be used for BLTouch Servo function on older variants (<= V08)
//
// Filament Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PC0 // XMAX plug on PCB used as filament runout sensor on Alfawise boards (inverting true)
#endif
// //
// Steppers // Steppers
// //
@ -78,12 +86,7 @@
#define FAN_PIN PA15 // pin 77 (4cm Fan) #define FAN_PIN PA15 // pin 77 (4cm Fan)
#define FAN_SOFT_PWM // Required to avoid issues with heating or STLink #define FAN_SOFT_PWM // Required to avoid issues with heating or STLink
#define FAN_MIN_PWM 35 // Fan will not start in 1-30 range #define FAN_MIN_PWM 35 // Fan will not start in 1-30 range
#define FAN_MAX_PWM 255 #define FAN_MAX_PWM 255
// Filament Sensor
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PC0 // XMAX plug on PCB used as filament runout sensor on Alfawise boards (inverting true)
#endif
//#define BEEPER_PIN PD13 // pin 60 (Servo PWM output 5V/GND on Board V0G+) made for BL-Touch sensor //#define BEEPER_PIN PD13 // pin 60 (Servo PWM output 5V/GND on Board V0G+) made for BL-Touch sensor
// Can drive a PC Buzzer, if connected between PWM and 5V pins // Can drive a PC Buzzer, if connected between PWM and 5V pins
@ -93,17 +96,14 @@
// //
// PWM // PWM
// //
//#define NUM_SERVOS 1
//#define SERVO0_TIMER_NUM 1 // General or Adv. timer to use for the servo PWM (2 & 5 are reserved)
#define SERVO0_PWM_OD
#define SERVO0_PIN PD13 // Open drain PWM pin on the V0G (GND or floating 5V) #define SERVO0_PIN PD13 // Open drain PWM pin on the V0G (GND or floating 5V)
#define SERVO0_PWM_OD // Comment this if using PE5
//#define SERVO0_PIN PE5 // Pulled up PWM pin on the V08 (3.3V or 0) //#define SERVO0_PIN PE5 // Pulled up PWM pin on the V08 (3.3V or 0)
/** /**
* Note: Alfawise screens use various TFT controllers. Supported screens * Note: Alfawise screens use various TFT controllers. Supported screens
* are based on the ILI9342, ILI9328 and ST7798V. Define init sequences for * are based on the ILI9341, ILI9328 and ST7798V. Define init sequences for
* other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp * other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
* *
* If the screen stays white, disable 'LCD_RESET_PIN' to let the bootloader * If the screen stays white, disable 'LCD_RESET_PIN' to let the bootloader
@ -112,7 +112,6 @@
* Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu * Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu
* because Marlin uses the reset as a failsafe to revive a glitchy LCD. * because Marlin uses the reset as a failsafe to revive a glitchy LCD.
*/ */
#pragma once
#define LCD_RESET_PIN PC4 // pin 33 #define LCD_RESET_PIN PC4 // pin 33
#define LCD_BACKLIGHT_PIN PD12 // pin 59 #define LCD_BACKLIGHT_PIN PD12 // pin 59
@ -123,8 +122,8 @@
#define FSMC_DMA_DEV DMA2 #define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5 #define FSMC_DMA_CHANNEL DMA_CH5
#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h #define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h
#define DOGLCD_SCK -1 #define DOGLCD_SCK -1
/** /**
* Note: Alfawise U20/U30 boards DON'T use SPI2, as the hardware designer * Note: Alfawise U20/U30 boards DON'T use SPI2, as the hardware designer
@ -146,13 +145,12 @@
// //
// SPI1 (EEPROM W25Q64 + DAC OUT) // SPI1 (EEPROM W25Q64 + DAC OUT)
// //
#undef E2END #undef E2END
#define E2END 0x7FF // EEPROM end address (reserve 2kB on sd/sram, real spi one is 8MB/64Mbits) #define E2END 0x7FF // EEPROM end address (reserve 2kB on sd/sram, real spi one is 8MB/64Mbits)
/* /*
#define SPI_EEPROM 1 // If commented this will create a file on the SD card as a replacement #define SPI_EEPROM 1 // If commented this will create a file on the SD card as a replacement
#define SPI_CHAN_EEPROM1 1 #define SPI_CHAN_EEPROM1 1
#define SPI_EEPROM1_CS PC5 // pin 34 #define SPI_EEPROM1_CS PC5 // pin 34
//#define EEPROM_SCK BOARD_SPI1_SCK_PIN // PA5 pin 30 //#define EEPROM_SCK BOARD_SPI1_SCK_PIN // PA5 pin 30
//#define EEPROM_MISO BOARD_SPI1_MISO_PIN // PA6 pin 31 //#define EEPROM_MISO BOARD_SPI1_MISO_PIN // PA6 pin 31

4
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -1335,7 +1335,7 @@
// The number of linear motions that can be in the plan at any give time. // The number of linear motions that can be in the plan at any give time.
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller #define BLOCK_BUFFER_SIZE 32 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
#else #else
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
#endif #endif
@ -1344,7 +1344,7 @@
// The ASCII buffer for serial input // The ASCII buffer for serial input
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 #define BUFSIZE 8
// Transmission to Host Buffer Size // Transmission to Host Buffer Size
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.