SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Update Bed PID comments

Browse source
This commit is contained in:
Scott Lahteine 2018-04-08 06:42:51 -05:00
parent 56486c5c0e
commit dca69efc11
64 changed files with 1280 additions and 832 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

33
Marlin/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/default/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
View file

@ -408,23 +408,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 206 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 206 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Anet/A6/Configuration.h
View file

@ -410,23 +410,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Anet/A8/Configuration.h
View file

@ -406,23 +406,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
#define BED_LIMIT_SWITCHING #define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/BQ/Hephestos/Configuration.h
View file

@ -387,23 +387,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
View file

@ -400,23 +400,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/BQ/WITBOX/Configuration.h
View file

@ -387,23 +387,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Cartesio/Configuration.h
View file

@ -400,23 +400,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Creality/CR-10/Configuration.h
View file

@ -404,23 +404,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Creality/CR-10S/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
View file

@ -413,23 +413,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Creality/CR-8/Configuration.h
View file

@ -404,23 +404,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Creality/Ender-2/Configuration.h
View file

@ -403,23 +403,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Creality/Ender-4/Configuration.h
View file

@ -404,23 +404,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Felix/Configuration.h
View file

@ -387,23 +387,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Felix/DUAL/Configuration.h
View file

@ -387,23 +387,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
View file

@ -404,23 +404,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
View file

@ -409,23 +409,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
View file

@ -409,23 +409,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
View file

@ -409,23 +409,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
View file

@ -403,23 +403,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/JGAurora/A5/Configuration.h
View file

@ -409,23 +409,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/MakerParts/Configuration.h
View file

@ -419,23 +419,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Malyan/M150/Configuration.h
View file

@ -407,23 +407,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Malyan/M200/Configuration.h
View file

@ -398,23 +398,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Mks/Sbase/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/RigidBot/Configuration.h
View file

@ -402,23 +402,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/SCARA/Configuration.h
View file

@ -418,23 +418,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/STM32F10/Configuration.h
View file

@ -400,23 +400,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Sanguinololu/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/TheBorg/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/TinyBoy2/Configuration.h
View file

@ -436,23 +436,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Tronxy/X1/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Tronxy/X5S/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Tronxy/XY100/Configuration.h
View file

@ -410,23 +410,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Velleman/K8200/Configuration.h
View file

@ -423,23 +423,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Velleman/K8400/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
View file

@ -404,23 +404,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/adafruit/ST7565/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
View file

@ -404,23 +404,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
View file

@ -404,23 +404,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
View file

@ -404,23 +404,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
View file

@ -409,23 +409,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/delta/generic/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/delta/kossel_mini/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/delta/kossel_pro/Configuration.h
View file

@ -391,23 +391,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/delta/kossel_xl/Configuration.h
View file

@ -403,23 +403,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
View file

@ -412,23 +412,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
#define PIDTEMPBED #define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/makibox/Configuration.h
View file

@ -399,23 +399,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 175 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 175 // limits duty cycle to bed; 255=full current
// This limit is set to 175 by default in the Makibox configuration and it can be adjusted // This limit is set to 175 by default in the Makibox configuration and it can be adjusted
// to increase the heatup rate. However, if changed, be aware of the safety concerns of // to increase the heatup rate. However, if changed, be aware of the safety concerns of

33
Marlin/src/config/examples/stm32f103ret6/Configuration.h
View file

@ -400,23 +400,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/tvrrug/Round2/Configuration.h
View file

@ -388,23 +388,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)

33
Marlin/src/config/examples/wt150/Configuration.h
View file

@ -404,23 +404,30 @@
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //============================= PID > Bed Temperature Control ===============
//=========================================================================== //===========================================================================
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// /**
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. * PID Bed Heating
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, *
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. * If this option is enabled set PID constants below.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably *
// shouldn't use bed PID until someone else verifies your hardware works. * The PID frequency will be the same as the extruder PWM.
// If this is enabled, find your own PID constants below. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED //#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. /**
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) * Max Bed Power
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
*/
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)