diff --git a/Marlin/src/feature/controllerfan.cpp b/Marlin/src/feature/controllerfan.cpp
index b152b0bd7..7f02e4c18 100644
--- a/Marlin/src/feature/controllerfan.cpp
+++ b/Marlin/src/feature/controllerfan.cpp
@@ -36,27 +36,27 @@ void controllerfan_update() {
   if (ELAPSED(ms, nextMotorCheck)) {
     nextMotorCheck = ms + 2500UL; // Not a time critical function, so only check every 2.5s
 
-    const bool xory = X_ENABLE_READ() == X_ENABLE_ON || Y_ENABLE_READ() == Y_ENABLE_ON;
+    const bool xory = X_ENABLE_READ() == bool(X_ENABLE_ON) || Y_ENABLE_READ() == bool(Y_ENABLE_ON);
 
     // If any of the drivers or the bed are enabled...
-    if (xory || Z_ENABLE_READ() == Z_ENABLE_ON
+    if (xory || Z_ENABLE_READ() == bool(Z_ENABLE_ON)
       #if HAS_HEATED_BED
         || thermalManager.temp_bed.soft_pwm_amount > 0
       #endif
       #if HAS_X2_ENABLE
-        || X2_ENABLE_READ() == X_ENABLE_ON
+        || X2_ENABLE_READ() == bool(X_ENABLE_ON)
       #endif
       #if HAS_Y2_ENABLE
-        || Y2_ENABLE_READ() == Y_ENABLE_ON
+        || Y2_ENABLE_READ() == bool(Y_ENABLE_ON)
       #endif
       #if HAS_Z2_ENABLE
-        || Z2_ENABLE_READ() == Z_ENABLE_ON
+        || Z2_ENABLE_READ() == bool(Z_ENABLE_ON)
       #endif
       #if HAS_Z3_ENABLE
-        || Z3_ENABLE_READ() == Z_ENABLE_ON
+        || Z3_ENABLE_READ() == bool(Z_ENABLE_ON)
       #endif
       #if E_STEPPERS
-        #define _OR_ENABLED_E(N) || E##N##_ENABLE_READ() == E_ENABLE_ON
+        #define _OR_ENABLED_E(N) || E##N##_ENABLE_READ() == bool(E_ENABLE_ON)
         REPEAT(E_STEPPERS, _OR_ENABLED_E)
       #endif
     ) {
diff --git a/Marlin/src/module/stepper/indirection.h b/Marlin/src/module/stepper/indirection.h
index 28dc00436..c1bcb7140 100644
--- a/Marlin/src/module/stepper/indirection.h
+++ b/Marlin/src/module/stepper/indirection.h
@@ -51,70 +51,70 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
 #ifndef X_ENABLE_INIT
   #define X_ENABLE_INIT() SET_OUTPUT(X_ENABLE_PIN)
   #define X_ENABLE_WRITE(STATE) WRITE(X_ENABLE_PIN,STATE)
-  #define X_ENABLE_READ() READ(X_ENABLE_PIN)
+  #define X_ENABLE_READ() bool(READ(X_ENABLE_PIN))
 #endif
 #ifndef X_DIR_INIT
   #define X_DIR_INIT() SET_OUTPUT(X_DIR_PIN)
   #define X_DIR_WRITE(STATE) WRITE(X_DIR_PIN,STATE)
-  #define X_DIR_READ() READ(X_DIR_PIN)
+  #define X_DIR_READ() bool(READ(X_DIR_PIN))
 #endif
 #define X_STEP_INIT() SET_OUTPUT(X_STEP_PIN)
 #ifndef X_STEP_WRITE
   #define X_STEP_WRITE(STATE) WRITE(X_STEP_PIN,STATE)
 #endif
-#define X_STEP_READ() READ(X_STEP_PIN)
+#define X_STEP_READ() bool(READ(X_STEP_PIN))
 
 // Y Stepper
 #ifndef Y_ENABLE_INIT
   #define Y_ENABLE_INIT() SET_OUTPUT(Y_ENABLE_PIN)
   #define Y_ENABLE_WRITE(STATE) WRITE(Y_ENABLE_PIN,STATE)
-  #define Y_ENABLE_READ() READ(Y_ENABLE_PIN)
+  #define Y_ENABLE_READ() bool(READ(Y_ENABLE_PIN))
 #endif
 #ifndef Y_DIR_INIT
   #define Y_DIR_INIT() SET_OUTPUT(Y_DIR_PIN)
   #define Y_DIR_WRITE(STATE) WRITE(Y_DIR_PIN,STATE)
-  #define Y_DIR_READ() READ(Y_DIR_PIN)
+  #define Y_DIR_READ() bool(READ(Y_DIR_PIN))
 #endif
 #define Y_STEP_INIT() SET_OUTPUT(Y_STEP_PIN)
 #ifndef Y_STEP_WRITE
   #define Y_STEP_WRITE(STATE) WRITE(Y_STEP_PIN,STATE)
 #endif
-#define Y_STEP_READ() READ(Y_STEP_PIN)
+#define Y_STEP_READ() bool(READ(Y_STEP_PIN))
 
 // Z Stepper
 #ifndef Z_ENABLE_INIT
   #define Z_ENABLE_INIT() SET_OUTPUT(Z_ENABLE_PIN)
   #define Z_ENABLE_WRITE(STATE) WRITE(Z_ENABLE_PIN,STATE)
-  #define Z_ENABLE_READ() READ(Z_ENABLE_PIN)
+  #define Z_ENABLE_READ() bool(READ(Z_ENABLE_PIN))
 #endif
 #ifndef Z_DIR_INIT
   #define Z_DIR_INIT() SET_OUTPUT(Z_DIR_PIN)
   #define Z_DIR_WRITE(STATE) WRITE(Z_DIR_PIN,STATE)
-  #define Z_DIR_READ() READ(Z_DIR_PIN)
+  #define Z_DIR_READ() bool(READ(Z_DIR_PIN))
 #endif
 #define Z_STEP_INIT() SET_OUTPUT(Z_STEP_PIN)
 #ifndef Z_STEP_WRITE
   #define Z_STEP_WRITE(STATE) WRITE(Z_STEP_PIN,STATE)
 #endif
-#define Z_STEP_READ() READ(Z_STEP_PIN)
+#define Z_STEP_READ() bool(READ(Z_STEP_PIN))
 
 // X2 Stepper
 #if HAS_X2_ENABLE
   #ifndef X2_ENABLE_INIT
     #define X2_ENABLE_INIT() SET_OUTPUT(X2_ENABLE_PIN)
     #define X2_ENABLE_WRITE(STATE) WRITE(X2_ENABLE_PIN,STATE)
-    #define X2_ENABLE_READ() READ(X2_ENABLE_PIN)
+    #define X2_ENABLE_READ() bool(READ(X2_ENABLE_PIN))
   #endif
   #ifndef X2_DIR_INIT
     #define X2_DIR_INIT() SET_OUTPUT(X2_DIR_PIN)
     #define X2_DIR_WRITE(STATE) WRITE(X2_DIR_PIN,STATE)
-    #define X2_DIR_READ() READ(X2_DIR_PIN)
+    #define X2_DIR_READ() bool(READ(X2_DIR_PIN))
   #endif
   #define X2_STEP_INIT() SET_OUTPUT(X2_STEP_PIN)
   #ifndef X2_STEP_WRITE
     #define X2_STEP_WRITE(STATE) WRITE(X2_STEP_PIN,STATE)
   #endif
-  #define X2_STEP_READ() READ(X2_STEP_PIN)
+  #define X2_STEP_READ() bool(READ(X2_STEP_PIN))
 #endif
 
 // Y2 Stepper
@@ -122,18 +122,18 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
   #ifndef Y2_ENABLE_INIT
     #define Y2_ENABLE_INIT() SET_OUTPUT(Y2_ENABLE_PIN)
     #define Y2_ENABLE_WRITE(STATE) WRITE(Y2_ENABLE_PIN,STATE)
-    #define Y2_ENABLE_READ() READ(Y2_ENABLE_PIN)
+    #define Y2_ENABLE_READ() bool(READ(Y2_ENABLE_PIN))
   #endif
   #ifndef Y2_DIR_INIT
     #define Y2_DIR_INIT() SET_OUTPUT(Y2_DIR_PIN)
     #define Y2_DIR_WRITE(STATE) WRITE(Y2_DIR_PIN,STATE)
-    #define Y2_DIR_READ() READ(Y2_DIR_PIN)
+    #define Y2_DIR_READ() bool(READ(Y2_DIR_PIN))
   #endif
   #define Y2_STEP_INIT() SET_OUTPUT(Y2_STEP_PIN)
   #ifndef Y2_STEP_WRITE
     #define Y2_STEP_WRITE(STATE) WRITE(Y2_STEP_PIN,STATE)
   #endif
-  #define Y2_STEP_READ() READ(Y2_STEP_PIN)
+  #define Y2_STEP_READ() bool(READ(Y2_STEP_PIN))
 #else
   #define Y2_DIR_WRITE(STATE) NOOP
 #endif
@@ -143,18 +143,18 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
   #ifndef Z2_ENABLE_INIT
     #define Z2_ENABLE_INIT() SET_OUTPUT(Z2_ENABLE_PIN)
     #define Z2_ENABLE_WRITE(STATE) WRITE(Z2_ENABLE_PIN,STATE)
-    #define Z2_ENABLE_READ() READ(Z2_ENABLE_PIN)
+    #define Z2_ENABLE_READ() bool(READ(Z2_ENABLE_PIN))
   #endif
   #ifndef Z2_DIR_INIT
     #define Z2_DIR_INIT() SET_OUTPUT(Z2_DIR_PIN)
     #define Z2_DIR_WRITE(STATE) WRITE(Z2_DIR_PIN,STATE)
-    #define Z2_DIR_READ() READ(Z2_DIR_PIN)
+    #define Z2_DIR_READ() bool(READ(Z2_DIR_PIN))
   #endif
   #define Z2_STEP_INIT() SET_OUTPUT(Z2_STEP_PIN)
   #ifndef Z2_STEP_WRITE
     #define Z2_STEP_WRITE(STATE) WRITE(Z2_STEP_PIN,STATE)
   #endif
-  #define Z2_STEP_READ() READ(Z2_STEP_PIN)
+  #define Z2_STEP_READ() bool(READ(Z2_STEP_PIN))
 #else
   #define Z2_DIR_WRITE(STATE) NOOP
 #endif
@@ -164,18 +164,18 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
   #ifndef Z3_ENABLE_INIT
     #define Z3_ENABLE_INIT() SET_OUTPUT(Z3_ENABLE_PIN)
     #define Z3_ENABLE_WRITE(STATE) WRITE(Z3_ENABLE_PIN,STATE)
-    #define Z3_ENABLE_READ() READ(Z3_ENABLE_PIN)
+    #define Z3_ENABLE_READ() bool(READ(Z3_ENABLE_PIN))
   #endif
   #ifndef Z3_DIR_INIT
     #define Z3_DIR_INIT() SET_OUTPUT(Z3_DIR_PIN)
     #define Z3_DIR_WRITE(STATE) WRITE(Z3_DIR_PIN,STATE)
-    #define Z3_DIR_READ() READ(Z3_DIR_PIN)
+    #define Z3_DIR_READ() bool(READ(Z3_DIR_PIN))
   #endif
   #define Z3_STEP_INIT() SET_OUTPUT(Z3_STEP_PIN)
   #ifndef Z3_STEP_WRITE
     #define Z3_STEP_WRITE(STATE) WRITE(Z3_STEP_PIN,STATE)
   #endif
-  #define Z3_STEP_READ() READ(Z3_STEP_PIN)
+  #define Z3_STEP_READ() bool(READ(Z3_STEP_PIN))
 #else
   #define Z3_DIR_WRITE(STATE) NOOP
 #endif
@@ -184,103 +184,103 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
 #ifndef E0_ENABLE_INIT
   #define E0_ENABLE_INIT() SET_OUTPUT(E0_ENABLE_PIN)
   #define E0_ENABLE_WRITE(STATE) WRITE(E0_ENABLE_PIN,STATE)
-  #define E0_ENABLE_READ() READ(E0_ENABLE_PIN)
+  #define E0_ENABLE_READ() bool(READ(E0_ENABLE_PIN))
 #endif
 #ifndef E0_DIR_INIT
   #define E0_DIR_INIT() SET_OUTPUT(E0_DIR_PIN)
   #define E0_DIR_WRITE(STATE) WRITE(E0_DIR_PIN,STATE)
-  #define E0_DIR_READ() READ(E0_DIR_PIN)
+  #define E0_DIR_READ() bool(READ(E0_DIR_PIN))
 #endif
 #define E0_STEP_INIT() SET_OUTPUT(E0_STEP_PIN)
 #ifndef E0_STEP_WRITE
   #define E0_STEP_WRITE(STATE) WRITE(E0_STEP_PIN,STATE)
 #endif
-#define E0_STEP_READ() READ(E0_STEP_PIN)
+#define E0_STEP_READ() bool(READ(E0_STEP_PIN))
 
 // E1 Stepper
 #ifndef E1_ENABLE_INIT
   #define E1_ENABLE_INIT() SET_OUTPUT(E1_ENABLE_PIN)
   #define E1_ENABLE_WRITE(STATE) WRITE(E1_ENABLE_PIN,STATE)
-  #define E1_ENABLE_READ() READ(E1_ENABLE_PIN)
+  #define E1_ENABLE_READ() bool(READ(E1_ENABLE_PIN))
 #endif
 #ifndef E1_DIR_INIT
   #define E1_DIR_INIT() SET_OUTPUT(E1_DIR_PIN)
   #define E1_DIR_WRITE(STATE) WRITE(E1_DIR_PIN,STATE)
-  #define E1_DIR_READ() READ(E1_DIR_PIN)
+  #define E1_DIR_READ() bool(READ(E1_DIR_PIN))
 #endif
 #define E1_STEP_INIT() SET_OUTPUT(E1_STEP_PIN)
 #ifndef E1_STEP_WRITE
   #define E1_STEP_WRITE(STATE) WRITE(E1_STEP_PIN,STATE)
 #endif
-#define E1_STEP_READ() READ(E1_STEP_PIN)
+#define E1_STEP_READ() bool(READ(E1_STEP_PIN))
 
 // E2 Stepper
 #ifndef E2_ENABLE_INIT
   #define E2_ENABLE_INIT() SET_OUTPUT(E2_ENABLE_PIN)
   #define E2_ENABLE_WRITE(STATE) WRITE(E2_ENABLE_PIN,STATE)
-  #define E2_ENABLE_READ() READ(E2_ENABLE_PIN)
+  #define E2_ENABLE_READ() bool(READ(E2_ENABLE_PIN))
 #endif
 #ifndef E2_DIR_INIT
   #define E2_DIR_INIT() SET_OUTPUT(E2_DIR_PIN)
   #define E2_DIR_WRITE(STATE) WRITE(E2_DIR_PIN,STATE)
-  #define E2_DIR_READ() READ(E2_DIR_PIN)
+  #define E2_DIR_READ() bool(READ(E2_DIR_PIN))
 #endif
 #define E2_STEP_INIT() SET_OUTPUT(E2_STEP_PIN)
 #ifndef E2_STEP_WRITE
   #define E2_STEP_WRITE(STATE) WRITE(E2_STEP_PIN,STATE)
 #endif
-#define E2_STEP_READ() READ(E2_STEP_PIN)
+#define E2_STEP_READ() bool(READ(E2_STEP_PIN))
 
 // E3 Stepper
 #ifndef E3_ENABLE_INIT
   #define E3_ENABLE_INIT() SET_OUTPUT(E3_ENABLE_PIN)
   #define E3_ENABLE_WRITE(STATE) WRITE(E3_ENABLE_PIN,STATE)
-  #define E3_ENABLE_READ() READ(E3_ENABLE_PIN)
+  #define E3_ENABLE_READ() bool(READ(E3_ENABLE_PIN))
 #endif
 #ifndef E3_DIR_INIT
   #define E3_DIR_INIT() SET_OUTPUT(E3_DIR_PIN)
   #define E3_DIR_WRITE(STATE) WRITE(E3_DIR_PIN,STATE)
-  #define E3_DIR_READ() READ(E3_DIR_PIN)
+  #define E3_DIR_READ() bool(READ(E3_DIR_PIN))
 #endif
 #define E3_STEP_INIT() SET_OUTPUT(E3_STEP_PIN)
 #ifndef E3_STEP_WRITE
   #define E3_STEP_WRITE(STATE) WRITE(E3_STEP_PIN,STATE)
 #endif
-#define E3_STEP_READ() READ(E3_STEP_PIN)
+#define E3_STEP_READ() bool(READ(E3_STEP_PIN))
 
 // E4 Stepper
 #ifndef E4_ENABLE_INIT
   #define E4_ENABLE_INIT() SET_OUTPUT(E4_ENABLE_PIN)
   #define E4_ENABLE_WRITE(STATE) WRITE(E4_ENABLE_PIN,STATE)
-  #define E4_ENABLE_READ() READ(E4_ENABLE_PIN)
+  #define E4_ENABLE_READ() bool(READ(E4_ENABLE_PIN))
 #endif
 #ifndef E4_DIR_INIT
   #define E4_DIR_INIT() SET_OUTPUT(E4_DIR_PIN)
   #define E4_DIR_WRITE(STATE) WRITE(E4_DIR_PIN,STATE)
-  #define E4_DIR_READ() READ(E4_DIR_PIN)
+  #define E4_DIR_READ() bool(READ(E4_DIR_PIN))
 #endif
 #define E4_STEP_INIT() SET_OUTPUT(E4_STEP_PIN)
 #ifndef E4_STEP_WRITE
   #define E4_STEP_WRITE(STATE) WRITE(E4_STEP_PIN,STATE)
 #endif
-#define E4_STEP_READ() READ(E4_STEP_PIN)
+#define E4_STEP_READ() bool(READ(E4_STEP_PIN))
 
 // E5 Stepper
 #ifndef E5_ENABLE_INIT
   #define E5_ENABLE_INIT() SET_OUTPUT(E5_ENABLE_PIN)
   #define E5_ENABLE_WRITE(STATE) WRITE(E5_ENABLE_PIN,STATE)
-  #define E5_ENABLE_READ() READ(E5_ENABLE_PIN)
+  #define E5_ENABLE_READ() bool(READ(E5_ENABLE_PIN))
 #endif
 #ifndef E5_DIR_INIT
   #define E5_DIR_INIT() SET_OUTPUT(E5_DIR_PIN)
   #define E5_DIR_WRITE(STATE) WRITE(E5_DIR_PIN,STATE)
-  #define E5_DIR_READ() READ(E5_DIR_PIN)
+  #define E5_DIR_READ() bool(READ(E5_DIR_PIN))
 #endif
 #define E5_STEP_INIT() SET_OUTPUT(E5_STEP_PIN)
 #ifndef E5_STEP_WRITE
   #define E5_STEP_WRITE(STATE) WRITE(E5_STEP_PIN,STATE)
 #endif
-#define E5_STEP_READ() READ(E5_STEP_PIN)
+#define E5_STEP_READ() bool(READ(E5_STEP_PIN))
 
 /**
  * Extruder indirection for the single E axis