Minor tweaks to M109 / M190

This commit is contained in:
Scott Lahteine 2016-06-17 17:26:21 -07:00
parent cabb71ff38
commit de177ba6c9

View file

@ -4738,12 +4738,23 @@ inline void gcode_M109() {
KEEPALIVE_STATE(NOT_BUSY);
do {
// Target temperature might be changed during the loop
if (theTarget != thermalManager.degTargetHotend(target_extruder)) {
wants_to_cool = thermalManager.isCoolingHotend(target_extruder);
theTarget = thermalManager.degTargetHotend(target_extruder);
// Exit if S<lower>, continue if S<higher>, R<lower>, or R<higher>
if (no_wait_for_cooling && wants_to_cool) break;
// Prevent a wait-forever situation if R is misused i.e. M109 R0
// Try to calculate a ballpark safe margin by halving EXTRUDE_MINTEMP
if (wants_to_cool && theTarget < (EXTRUDE_MINTEMP)/2) break;
}
now = millis();
if (ELAPSED(now, next_temp_ms)) { //Print temp & remaining time every 1s while waiting
next_temp_ms = now + 1000UL;
#if HAS_TEMP_HOTEND || HAS_TEMP_BED
print_heaterstates();
#endif
#if TEMP_RESIDENCY_TIME > 0
SERIAL_PROTOCOLPGM(" W:");
if (residency_start_ms) {
@ -4758,19 +4769,6 @@ inline void gcode_M109() {
#endif
}
// Target temperature might be changed during the loop
if (theTarget != thermalManager.degTargetHotend(target_extruder)) {
wants_to_cool = thermalManager.isCoolingHotend(target_extruder);
theTarget = thermalManager.degTargetHotend(target_extruder);
// Exit if S<lower>, continue if S<higher>, R<lower>, or R<higher>
if (no_wait_for_cooling && wants_to_cool) break;
// Prevent a wait-forever situation if R is misused i.e. M109 R0
// Try to calculate a ballpark safe margin by halving EXTRUDE_MINTEMP
if (wants_to_cool && theTarget < (EXTRUDE_MINTEMP)/2) break;
}
idle();
refresh_cmd_timeout(); // to prevent stepper_inactive_time from running out
@ -4780,11 +4778,11 @@ inline void gcode_M109() {
if (!residency_start_ms) {
// Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time.
if (temp_diff < TEMP_WINDOW) residency_start_ms = millis();
if (temp_diff < TEMP_WINDOW) residency_start_ms = now;
}
else if (temp_diff > TEMP_HYSTERESIS) {
// Restart the timer whenever the temperature falls outside the hysteresis.
residency_start_ms = millis();
residency_start_ms = now;
}
#endif //TEMP_RESIDENCY_TIME > 0
@ -4825,6 +4823,19 @@ inline void gcode_M109() {
KEEPALIVE_STATE(NOT_BUSY);
do {
// Target temperature might be changed during the loop
if (theTarget != thermalManager.degTargetBed()) {
wants_to_cool = thermalManager.isCoolingBed();
theTarget = thermalManager.degTargetBed();
// Exit if S<lower>, continue if S<higher>, R<lower>, or R<higher>
if (no_wait_for_cooling && wants_to_cool) break;
// Prevent a wait-forever situation if R is misused i.e. M190 R0
// Simply don't wait to cool a bed under 30C
if (wants_to_cool && theTarget < 30) break;
}
now = millis();
if (ELAPSED(now, next_temp_ms)) { //Print Temp Reading every 1 second while heating up.
next_temp_ms = now + 1000UL;
@ -4843,19 +4854,6 @@ inline void gcode_M109() {
#endif
}
// Target temperature might be changed during the loop
if (theTarget != thermalManager.degTargetBed()) {
wants_to_cool = thermalManager.isCoolingBed();
theTarget = thermalManager.degTargetBed();
// Exit if S<lower>, continue if S<higher>, R<lower>, or R<higher>
if (no_wait_for_cooling && wants_to_cool) break;
// Prevent a wait-forever situation if R is misused i.e. M190 R0
// Simply don't wait to cool a bed under 30C
if (wants_to_cool && theTarget < 30) break;
}
idle();
refresh_cmd_timeout(); // to prevent stepper_inactive_time from running out
@ -4865,11 +4863,11 @@ inline void gcode_M109() {
if (!residency_start_ms) {
// Start the TEMP_BED_RESIDENCY_TIME timer when we reach target temp for the first time.
if (temp_diff < TEMP_BED_WINDOW) residency_start_ms = millis();
if (temp_diff < TEMP_BED_WINDOW) residency_start_ms = now;
}
else if (temp_diff > TEMP_BED_HYSTERESIS) {
// Restart the timer whenever the temperature falls outside the hysteresis.
residency_start_ms = millis();
residency_start_ms = now;
}
#endif //TEMP_BED_RESIDENCY_TIME > 0