SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Simplify serial port redirect (#13234)

Browse source
This commit is contained in:
Scott Lahteine 2019-02-23 22:53:01 -06:00 committed by GitHub
parent 88cc1d1a31
commit e15354e387
Signed by: GitHub
GPG key ID: 4AEE18F83AFDEB23
22 changed files with 575 additions and 876 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.cpp
View file

@ -65,9 +65,12 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
return CTRL_NO_PRESENT;
#ifdef DEBUG_MMC
{
char buffer[80];
sprintf_P(buffer, PSTR("SDRD: %d @ 0x%08x\n"), nb_sector, addr);
SERIAL_ECHO_P(0, buffer);
PORT_REDIRECT(0);
SERIAL_ECHO(buffer);
}
#endif
// Start reading
@ -99,9 +102,12 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
return CTRL_NO_PRESENT;
#ifdef DEBUG_MMC
{
char buffer[80];
sprintf_P(buffer, PSTR("SDWR: %d @ 0x%08x\n"), nb_sector, addr);
SERIAL_ECHO_P(0, buffer);
PORT_REDIRECT(0);
SERIAL_ECHO(buffer);
}
#endif
if (!card.getSd2Card().writeStart(addr, nb_sector))

22
Marlin/src/core/serial.cpp
View file

@ -29,30 +29,12 @@ static const char errormagic[] PROGMEM = "Error:";
static const char echomagic[] PROGMEM = "echo:";
#if NUM_SERIAL > 1
void serialprintPGM_P(const int8_t p, const char * str) {
while (char ch = pgm_read_byte(str++)) SERIAL_CHAR_P(p, ch);
}
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, const char *v) { serialprintPGM_P(p, s_P); SERIAL_ECHO_P(p, v); }
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, char v) { serialprintPGM_P(p, s_P); SERIAL_CHAR_P(p, v); }
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, int v) { serialprintPGM_P(p, s_P); SERIAL_ECHO_P(p, v); }
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, long v) { serialprintPGM_P(p, s_P); SERIAL_ECHO_P(p, v); }
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, float v) { serialprintPGM_P(p, s_P); SERIAL_ECHO_P(p, v); }
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, double v) { serialprintPGM_P(p, s_P); SERIAL_ECHO_P(p, v); }
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, unsigned int v) { serialprintPGM_P(p, s_P); SERIAL_ECHO_P(p, v); }
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, unsigned long v) { serialprintPGM_P(p, s_P); SERIAL_ECHO_P(p, v); }
void serial_spaces_P(const int8_t p, uint8_t count) { count *= (PROPORTIONAL_FONT_RATIO); while (count--) SERIAL_CHAR_P(p, ' '); }
void serial_echo_start_P(const int8_t p) { serialprintPGM_P(p, echomagic); }
void serial_error_start_P(const int8_t p) { serialprintPGM_P(p, errormagic); }
int8_t serial_port_index = SERIAL_PORT;
#endif
void serialprintPGM(PGM_P str) {
while (char ch = pgm_read_byte(str++)) SERIAL_CHAR(ch);
while (const char c = pgm_read_byte(str++)) SERIAL_CHAR(c);
}
void serial_echo_start() { serialprintPGM(echomagic); }
void serial_error_start() { serialprintPGM(errormagic); }

148
Marlin/src/core/serial.h
View file

@ -43,131 +43,43 @@ extern uint8_t marlin_debug_flags;
#define DEBUGGING(F) (marlin_debug_flags & (MARLIN_DEBUG_## F))
#if TX_BUFFER_SIZE < 1
#define SERIAL_FLUSHTX_P(p)
#define SERIAL_FLUSHTX()
#endif
#if NUM_SERIAL > 1
extern int8_t serial_port_index;
#define _PORT_REDIRECT(n,p) REMEMBER(n,serial_port_index,p)
#define _PORT_RESTORE(n) RESTORE(n)
#define SERIAL_BOTH 0x7F
#define SERIAL_OUT(WHAT, ...) do{ \
if (!serial_port_index || serial_port_index == SERIAL_BOTH) MYSERIAL0.WHAT(##__VA_ARGS__); \
if ( serial_port_index) MYSERIAL1.WHAT(##__VA_ARGS__); \
}while(0)
#else
#define _PORT_REDIRECT(n,p) NOOP
#define _PORT_RESTORE(n) NOOP
#define SERIAL_OUT(WHAT, ...) MYSERIAL0.WHAT(__VA_ARGS__)
#endif
//
// Serial out to all ports
//
#define SERIAL_CHAR(x) (MYSERIAL0.write(x), MYSERIAL1.write(x))
#define SERIAL_ECHO(x) (MYSERIAL0.print(x), MYSERIAL1.print(x))
#define SERIAL_ECHO_F(x,y) (MYSERIAL0.print(x,y), MYSERIAL1.print(x,y))
#define SERIAL_ECHOLN(x) (MYSERIAL0.println(x), MYSERIAL1.println(x))
#define SERIAL_PRINT(x,b) (MYSERIAL0.print(x,b), MYSERIAL1.print(x,b))
#define SERIAL_PRINTLN(x,b) (MYSERIAL0.println(x,b), MYSERIAL1.println(x,b))
#define SERIAL_PRINTF(args...) (MYSERIAL0.printf(args), MYSERIAL1.printf(args))
#define SERIAL_FLUSH() (MYSERIAL0.flush(), MYSERIAL1.flush())
#if TX_BUFFER_SIZE > 0
#define SERIAL_FLUSHTX() (MYSERIAL0.flushTX(), MYSERIAL1.flushTX())
#endif
#define PORT_REDIRECT(p) _PORT_REDIRECT(1,p)
#define PORT_RESTORE() _PORT_RESTORE(1)
//
// Serial out with port redirect
//
#define SERIAL_CHAR_P(p,x) (WITHIN(p, 0, NUM_SERIAL-1) ? (p == 0 ? MYSERIAL0.write(x) : MYSERIAL1.write(x)) : SERIAL_CHAR(x))
#define SERIAL_ECHO_P(p,x) (WITHIN(p, 0, NUM_SERIAL-1) ? (p == 0 ? MYSERIAL0.print(x) : MYSERIAL1.print(x)) : SERIAL_ECHO(x))
#define SERIAL_ECHO_F_P(p,x,y) (WITHIN(p, 0, NUM_SERIAL-1) ? (p == 0 ? MYSERIAL0.print(x,y) : MYSERIAL1.print(x,y)) : SERIAL_ECHO_F(x,y))
#define SERIAL_ECHOLN_P(p,x) (WITHIN(p, 0, NUM_SERIAL-1) ? (p == 0 ? MYSERIAL0.println(x) : MYSERIAL1.println(x)) : SERIAL_ECHOLN(x))
#define SERIAL_PRINT_P(p,x,b) (WITHIN(p, 0, NUM_SERIAL-1) ? (p == 0 ? MYSERIAL0.print(x,b) : MYSERIAL1.print(x,b)) : SERIAL_PRINT(x,b))
#define SERIAL_PRINTLN_P(p,x,b) (WITHIN(p, 0, NUM_SERIAL-1) ? (p == 0 ? MYSERIAL0.println(x,b) : MYSERIAL1.println(x,b)) : SERIAL_PRINTLN(x,b))
#define SERIAL_PRINTF_P(p,args...) (WITHIN(p, 0, NUM_SERIAL-1) ? (p == 0 ? MYSERIAL0.printf(args) : MYSERIAL1.printf(args)) : SERIAL_PRINTF(args))
#define SERIAL_FLUSH_P(p) (WITHIN(p, 0, NUM_SERIAL-1) ? (p == 0 ? MYSERIAL0.flush() : MYSERIAL1.flush()) : SERIAL_FLUSH())
#if TX_BUFFER_SIZE > 0
#define SERIAL_FLUSHTX_P(p) (WITHIN(p, 0, NUM_SERIAL-1) ? (p == 0 ? MYSERIAL0.flushTX() : MYSERIAL1.flushTX()) : SERIAL_FLUSHTX())
#endif
#define SERIAL_ECHOPGM_P(p,x) (serialprintPGM_P(p,PSTR(x)))
#define SERIAL_ECHOLNPGM_P(p,x) (serialprintPGM_P(p,PSTR(x "\n")))
#define SERIAL_ECHOPAIR_P(p, pre, value) (serial_echopair_PGM_P(p,PSTR(pre),(value)))
#define SERIAL_ECHO_START_P(p) serial_echo_start_P(p)
#define SERIAL_ERROR_START_P(p) serial_error_start_P(p)
#define SERIAL_EOL_P(p) SERIAL_CHAR_P(p,'\n')
#define SERIAL_ECHOPAIR_F_P(p, pre, value, y) do{ SERIAL_ECHO_P(p, pre); SERIAL_ECHO_F_P(p, value, y); }while(0)
#define SERIAL_ECHOLNPAIR_F_P(p, pre, value, y) do{ SERIAL_ECHOPAIR_F_P(p, pre, value, y); SERIAL_EOL_P(p); }while(0)
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, const char *v);
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, char v);
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, int v);
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, long v);
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, float v);
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, double v);
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, unsigned int v);
void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, unsigned long v);
inline void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, uint8_t v) { serial_echopair_PGM_P(p, s_P, (int)v); }
inline void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, bool v) { serial_echopair_PGM_P(p, s_P, (int)v); }
inline void serial_echopair_PGM_P(const int8_t p, PGM_P const s_P, void *v) { serial_echopair_PGM_P(p, s_P, (unsigned long)v); }
void serial_spaces_P(const int8_t p, uint8_t count);
#define SERIAL_ECHO_SP_P(p,C) serial_spaces_P(p,C)
void serialprintPGM_P(const int8_t p, PGM_P str);
void serial_echo_start_P(const int8_t p);
void serial_error_start_P(const int8_t p);
#else // NUM_SERIAL <= 1
//
// Serial out to all ports
//
#define SERIAL_CHAR(x) MYSERIAL0.write(x)
#define SERIAL_ECHO(x) MYSERIAL0.print(x)
#define SERIAL_ECHO_F(x,y) MYSERIAL0.print(x,y)
#define SERIAL_ECHOLN(x) MYSERIAL0.println(x)
#define SERIAL_PRINT(x,b) MYSERIAL0.print(x,b)
#define SERIAL_PRINTLN(x,b) MYSERIAL0.println(x,b)
#define SERIAL_PRINTF(args...) MYSERIAL0.printf(args)
#define SERIAL_FLUSH() MYSERIAL0.flush()
#if TX_BUFFER_SIZE > 0
#define SERIAL_FLUSHTX() MYSERIAL0.flushTX()
#endif
//
// Serial out with port redirect
//
#define SERIAL_CHAR_P(p,x) SERIAL_CHAR(x)
#define SERIAL_ECHO_P(p,x) SERIAL_ECHO(x)
#define SERIAL_ECHO_F_P(p,x,y) SERIAL_ECHO_F(x,y)
#define SERIAL_ECHOLN_P(p,x) SERIAL_ECHOLN(x)
#define SERIAL_PRINT_P(p,x,b) SERIAL_PRINT(x,b)
#define SERIAL_PRINTLN_P(p,x,b) SERIAL_PRINTLN(x,b)
#define SERIAL_PRINTF_P(p,args...) SERIAL_PRINTF(args)
#define SERIAL_FLUSH_P(p) SERIAL_FLUSH()
#if TX_BUFFER_SIZE > 0
#define SERIAL_FLUSHTX_P(p) SERIAL_FLUSHTX()
#endif
#define SERIAL_ECHOPGM_P(p,x) SERIAL_ECHOPGM(x)
#define SERIAL_ECHOLNPGM_P(p,x) SERIAL_ECHOLNPGM(x)
#define SERIAL_ECHOPAIR_P(p, pre, value) SERIAL_ECHOPAIR(pre, value)
#define SERIAL_ECHO_P(p,x) SERIAL_ECHO(x)
#define SERIAL_ECHOLN_P(p,x) SERIAL_ECHOLN(x)
#define SERIAL_ECHO_START_P(p) SERIAL_ECHO_START()
#define SERIAL_ERROR_START_P(p) SERIAL_ERROR_START()
#define SERIAL_EOL_P(p) SERIAL_EOL()
#define SERIAL_ECHOPAIR_F_P(p, pre, value, y) SERIAL_ECHOPAIR_F(pre, value, y)
#define SERIAL_ECHOLNPAIR_F_P(p, pre, value, y) SERIAL_ECHOLNPAIR_F(pre, value, y)
#define serial_echopair_PGM_P(p,s_P,v) serial_echopair_PGM(s_P, v)
#define serial_spaces_P(p,c) serial_spaces(c)
#define SERIAL_ECHO_SP_P(p,C) SERIAL_ECHO_SP(C)
#define serialprintPGM_P(p,s) serialprintPGM(s)
#endif // NUM_SERIAL < 2
#define SERIAL_CHAR(x) SERIAL_OUT(write, x)
#define SERIAL_ECHO(x) SERIAL_OUT(print, x)
#define SERIAL_ECHO_F(x,y) SERIAL_OUT(print, x, y)
#define SERIAL_ECHOLN(x) SERIAL_OUT(println, x)
#define SERIAL_PRINT(x,b) SERIAL_OUT(print, x, b)
#define SERIAL_PRINTLN(x,b) SERIAL_OUT(println, x, b)
#define SERIAL_PRINTF(args...) SERIAL_OUT(printf, args)
#define SERIAL_FLUSH() SERIAL_OUT(flush)
#if TX_BUFFER_SIZE > 0
#define SERIAL_FLUSHTX() SERIAL_OUT(flushTX)
#endif
#define SERIAL_ECHOPGM(x) (serialprintPGM(PSTR(x)))
#define SERIAL_ECHOLNPGM(x) (serialprintPGM(PSTR(x "\n")))
#define SERIAL_ECHOPAIR(pre, value) (serial_echopair_PGM(PSTR(pre), value))
#define SERIAL_ECHOLNPAIR(pre, value) do { SERIAL_ECHOPAIR(pre, value); SERIAL_EOL(); } while(0)
#define SERIAL_ECHOLNPAIR(pre, value) do{ SERIAL_ECHOPAIR(pre, value); SERIAL_EOL(); }while(0)
#define SERIAL_ECHOPAIR_F(pre, value, y) do{ SERIAL_ECHO(pre); SERIAL_ECHO_F(value, y); }while(0)
#define SERIAL_ECHOLNPAIR_F(pre, value, y) do{ SERIAL_ECHOPAIR_F(pre, value, y); SERIAL_EOL(); }while(0)
@ -177,13 +89,8 @@ extern uint8_t marlin_debug_flags;
#define SERIAL_EOL() SERIAL_CHAR('\n')
#define SERIAL_ECHO_MSG(STR) do{ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(STR); }while(0)
#define SERIAL_ECHO_MSG_P(p, STR) do{ SERIAL_ECHO_START_P(p); SERIAL_ECHOLNPGM_P(p, STR); }while(0)
#define SERIAL_ERROR_MSG(STR) do{ SERIAL_ERROR_START(); SERIAL_ECHOLNPGM(STR); }while(0)
#define SERIAL_ERROR_MSG_P(p, STR) do{ SERIAL_ERROR_START_P(p); SERIAL_ECHOLNPGM_P(p, STR); }while(0)
#define SERIAL_ECHOLNPAIR_P(p, pre, value) do{ SERIAL_ECHOPAIR_P(p, pre, value); SERIAL_EOL_P(p); }while(0)
void serial_spaces(uint8_t count);
#define SERIAL_ECHO_SP(C) serial_spaces(C)
//
@ -206,6 +113,7 @@ void serial_echo_start();
void serial_error_start();
void serialprint_onoff(const bool onoff);
void serialprintln_onoff(const bool onoff);
void serial_spaces(uint8_t count);
#if ENABLED(DEBUG_LEVELING_FEATURE)
void print_xyz(PGM_P const prefix, PGM_P const suffix, const float x, const float y, const float z);

4
Marlin/src/core/utility.h
View file

@ -133,5 +133,5 @@ public:
inline void restore() { ref_ = val_; }
};
#define REMEMBER(N,X, ...) restorer<typeof(X)> N##_restorer(X, ##__VA_ARGS__)
#define RESTORE(N) N##_restorer.restore()
#define REMEMBER(N,X, ...) restorer<typeof(X)> restorer_##N(X, ##__VA_ARGS__)
#define RESTORE(N) restorer_##N.restore()

44
Marlin/src/feature/bedlevel/ubl/ubl.cpp
View file

@ -34,46 +34,30 @@
#include "math.h"
void unified_bed_leveling::echo_name(
#if NUM_SERIAL > 1
const int8_t port/*= -1*/
#endif
) {
SERIAL_ECHOPGM_P(port, "Unified Bed Leveling");
void unified_bed_leveling::echo_name() {
SERIAL_ECHOPGM("Unified Bed Leveling");
}
void unified_bed_leveling::report_current_mesh(
#if NUM_SERIAL > 1
const int8_t port/*= -1*/
#endif
) {
void unified_bed_leveling::report_current_mesh() {
if (!leveling_is_valid()) return;
SERIAL_ECHO_MSG_P(port, " G29 I99");
SERIAL_ECHO_MSG(" G29 I99");
for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++)
for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++)
if (!isnan(z_values[x][y])) {
SERIAL_ECHO_START_P(port);
SERIAL_ECHOPAIR_P(port, " M421 I", x);
SERIAL_ECHOPAIR_P(port, " J", y);
SERIAL_ECHOPAIR_F_P(port, " Z", z_values[x][y], 2);
SERIAL_EOL_P(port);
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(" M421 I", x);
SERIAL_ECHOPAIR(" J", y);
SERIAL_ECHOPAIR_F(" Z", z_values[x][y], 2);
SERIAL_EOL();
serial_delay(75); // Prevent Printrun from exploding
}
}
void unified_bed_leveling::report_state(
#if NUM_SERIAL > 1
const int8_t port/*= -1*/
#endif
) {
echo_name(
#if NUM_SERIAL > 1
port
#endif
);
SERIAL_ECHOPGM_P(port, " System v" UBL_VERSION " ");
if (!planner.leveling_active) SERIAL_ECHOPGM_P(port, "in");
SERIAL_ECHOLNPGM_P(port, "active.");
void unified_bed_leveling::report_state() {
echo_name();
SERIAL_ECHOPGM(" System v" UBL_VERSION " ");
if (!planner.leveling_active) SERIAL_ECHOPGM("in");
SERIAL_ECHOLNPGM("active.");
serial_delay(50);
}

18
Marlin/src/feature/bedlevel/ubl/ubl.h
View file

@ -94,21 +94,9 @@ class unified_bed_leveling {
public:
static void echo_name(
#if NUM_SERIAL > 1
const int8_t port = -1
#endif
);
static void report_current_mesh(
#if NUM_SERIAL > 1
const int8_t port = -1
#endif
);
static void report_state(
#if NUM_SERIAL > 1
const int8_t port = -1
#endif
);
static void echo_name();
static void report_current_mesh();
static void report_state();
static void save_ubl_active_state_and_disable();
static void restore_ubl_active_state_and_leave();
static void display_map(const int) _O0;

18
Marlin/src/gcode/config/M217.cpp
View file

@ -33,19 +33,15 @@
void M217_report(const bool eeprom=false) {
#if NUM_SERIAL > 1
const int16_t port = command_queue_port[cmd_queue_index_r];
#endif
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
serialprintPGM_P(port, eeprom ? PSTR(" M217") : PSTR("Singlenozzle:"));
SERIAL_ECHOPAIR_P(port, " S", LINEAR_UNIT(toolchange_settings.swap_length));
SERIAL_ECHOPAIR_P(port, " P", LINEAR_UNIT(toolchange_settings.prime_speed));
SERIAL_ECHOPAIR_P(port, " R", LINEAR_UNIT(toolchange_settings.retract_speed));
serialprintPGM(eeprom ? PSTR(" M217") : PSTR("Singlenozzle:"));
SERIAL_ECHOPAIR(" S", LINEAR_UNIT(toolchange_settings.swap_length));
SERIAL_ECHOPAIR(" P", LINEAR_UNIT(toolchange_settings.prime_speed));
SERIAL_ECHOPAIR(" R", LINEAR_UNIT(toolchange_settings.retract_speed));
#if ENABLED(TOOLCHANGE_PARK)
SERIAL_ECHOPAIR_P(port, " X", LINEAR_UNIT(toolchange_settings.change_point.x));
SERIAL_ECHOPAIR_P(port, " Y", LINEAR_UNIT(toolchange_settings.change_point.y));
SERIAL_ECHOPAIR(" X", LINEAR_UNIT(toolchange_settings.change_point.x));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(toolchange_settings.change_point.y));
#endif
#else
@ -54,7 +50,7 @@ void M217_report(const bool eeprom=false) {
#endif
SERIAL_ECHOPAIR_P(port, " Z", LINEAR_UNIT(toolchange_settings.z_raise));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(toolchange_settings.z_raise));
SERIAL_EOL();
}

32
Marlin/src/gcode/config/M92.cpp
View file

@ -23,27 +23,22 @@
#include "../gcode.h"
#include "../../module/planner.h"
void report_M92(
#if NUM_SERIAL > 1
const int8_t port,
#endif
const bool echo=true, const int8_t e=-1
) {
if (echo) SERIAL_ECHO_START_P(port); else SERIAL_CHAR(' ');
SERIAL_ECHOPAIR_P(port, " M92 X", LINEAR_UNIT(planner.settings.axis_steps_per_mm[X_AXIS]));
SERIAL_ECHOPAIR_P(port, " Y", LINEAR_UNIT(planner.settings.axis_steps_per_mm[Y_AXIS]));
SERIAL_ECHOPAIR_P(port, " Z", LINEAR_UNIT(planner.settings.axis_steps_per_mm[Z_AXIS]));
void report_M92(const bool echo=true, const int8_t e=-1) {
if (echo) SERIAL_ECHO_START(); else SERIAL_CHAR(' ');
SERIAL_ECHOPAIR(" M92 X", LINEAR_UNIT(planner.settings.axis_steps_per_mm[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.settings.axis_steps_per_mm[Y_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.settings.axis_steps_per_mm[Z_AXIS]));
#if DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR_P(port, " E", VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS]));
SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS]));
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
#if ENABLED(DISTINCT_E_FACTORS)
for (uint8_t i = 0; i < E_STEPPERS; i++) {
if (e >= 0 && i != e) continue;
if (echo) SERIAL_ECHO_START_P(port); else SERIAL_CHAR(' ');
SERIAL_ECHOPAIR_P(port, " M92 T", (int)i);
SERIAL_ECHOLNPAIR_P(port, " E", VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS_N(i)]));
if (echo) SERIAL_ECHO_START(); else SERIAL_CHAR(' ');
SERIAL_ECHOPAIR(" M92 T", (int)i);
SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS_N(i)]));
}
#endif
}
@ -71,12 +66,7 @@ void GcodeSuite::M92() {
#if ENABLED(MAGIC_NUMBERS_GCODE)
"HL"
#endif
)) return report_M92(
#if NUM_SERIAL > 1
command_queue_port[cmd_queue_index_r],
#endif
true, target_extruder
);
)) return report_M92(true, target_extruder);
LOOP_XYZE(i) {
if (parser.seenval(axis_codes[i])) {

27
Marlin/src/gcode/eeprom/M500-M504.cpp
View file

@ -33,17 +33,11 @@
#include "../../gcode/queue.h"
#endif
#if ADD_PORT_ARG
#define CHAT_PORT command_queue_port[cmd_queue_index_r]
#else
#define CHAT_PORT
#endif
/**
* M500: Store settings in EEPROM
*/
void GcodeSuite::M500() {
(void)settings.save(CHAT_PORT);
(void)settings.save();
#if ENABLED(EXTENSIBLE_UI)
ExtUI::onStoreSettings();
#endif
@ -53,11 +47,7 @@ void GcodeSuite::M500() {
* M501: Read settings from EEPROM
*/
void GcodeSuite::M501() {
(void)settings.load(
#if ENABLED(EEPROM_SETTINGS)
CHAT_PORT
#endif
);
(void)settings.load();
#if ENABLED(EXTENSIBLE_UI)
ExtUI::onLoadSettings();
#endif
@ -67,7 +57,7 @@ void GcodeSuite::M501() {
* M502: Revert to default settings
*/
void GcodeSuite::M502() {
(void)settings.reset(CHAT_PORT);
(void)settings.reset();
#if ENABLED(EXTENSIBLE_UI)
ExtUI::onFactoryReset();
#endif
@ -79,12 +69,7 @@ void GcodeSuite::M502() {
* M503: print settings currently in memory
*/
void GcodeSuite::M503() {
(void)settings.report(
parser.seen('S') && !parser.value_bool()
#if NUM_SERIAL > 1
, command_queue_port[cmd_queue_index_r]
#endif
);
(void)settings.report(parser.boolval('S', true));
}
#endif // !DISABLE_M503
@ -94,7 +79,7 @@ void GcodeSuite::M502() {
* M504: Validate EEPROM Contents
*/
void GcodeSuite::M504() {
if (settings.validate(CHAT_PORT))
SERIAL_ECHO_MSG_P(command_queue_port[cmd_queue_index_r], "EEPROM OK");
if (settings.validate())
SERIAL_ECHO_MSG("EEPROM OK");
}
#endif

2
Marlin/src/gcode/gcode.cpp
View file

@ -754,6 +754,8 @@ void GcodeSuite::process_parsed_command(
void GcodeSuite::process_next_command() {
char * const current_command = command_queue[cmd_queue_index_r];
PORT_REDIRECT(command_queue_port[cmd_queue_index_r]);
if (DEBUGGING(ECHO)) {
SERIAL_ECHO_START();
SERIAL_ECHOLN(current_command);

8
Marlin/src/gcode/host/M115.cpp
View file

@ -40,14 +40,8 @@
* M115: Capabilities string
*/
void GcodeSuite::M115() {
#if NUM_SERIAL > 1
const int8_t port = command_queue_port[cmd_queue_index_r];
#define CAPLINE(STR,...) cap_line(PSTR(STR), port, __VA_ARGS__)
#else
#define CAPLINE(STR,...) cap_line(PSTR(STR), __VA_ARGS__)
#endif
SERIAL_ECHOLNPGM_P(port, MSG_M115_REPORT);
SERIAL_ECHOLNPGM(MSG_M115_REPORT);
#if ENABLED(EXTENDED_CAPABILITIES_REPORT)

11
Marlin/src/gcode/parser.cpp
View file

@ -328,13 +328,10 @@ void GCodeParser::parse(char *p) {
#endif // CNC_COORDINATE_SYSTEMS
void GCodeParser::unknown_command_error() {
#if NUM_SERIAL > 1
const int16_t port = command_queue_port[cmd_queue_index_r];
#endif
SERIAL_ECHO_START_P(port);
SERIAL_ECHOPAIR_P(port, MSG_UNKNOWN_COMMAND, command_ptr);
SERIAL_CHAR_P(port, '"');
SERIAL_EOL_P(port);
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(MSG_UNKNOWN_COMMAND, command_ptr);
SERIAL_CHAR('"');
SERIAL_EOL();
}
#if ENABLED(DEBUG_GCODE_PARSER)

102
Marlin/src/gcode/queue.cpp
View file

@ -219,21 +219,22 @@ void ok_to_send() {
#if NUM_SERIAL > 1
const int16_t port = command_queue_port[cmd_queue_index_r];
if (port < 0) return;
PORT_REDIRECT(port);
#endif
if (!send_ok[cmd_queue_index_r]) return;
SERIAL_ECHOPGM_P(port, MSG_OK);
SERIAL_ECHOPGM(MSG_OK);
#if ENABLED(ADVANCED_OK)
char* p = command_queue[cmd_queue_index_r];
if (*p == 'N') {
SERIAL_ECHO_P(port, ' ');
SERIAL_ECHO_P(port, *p++);
SERIAL_ECHO(' ');
SERIAL_ECHO(*p++);
while (NUMERIC_SIGNED(*p))
SERIAL_ECHO_P(port, *p++);
SERIAL_ECHO(*p++);
}
SERIAL_ECHOPGM_P(port, " P"); SERIAL_ECHO_P(port, int(BLOCK_BUFFER_SIZE - planner.movesplanned() - 1));
SERIAL_ECHOPGM_P(port, " B"); SERIAL_ECHO_P(port, BUFSIZE - commands_in_queue);
SERIAL_ECHOPGM(" P"); SERIAL_ECHO(int(BLOCK_BUFFER_SIZE - planner.movesplanned() - 1));
SERIAL_ECHOPGM(" B"); SERIAL_ECHO(BUFSIZE - commands_in_queue);
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
}
/**
@ -244,10 +245,11 @@ void flush_and_request_resend() {
#if NUM_SERIAL > 1
const int16_t port = command_queue_port[cmd_queue_index_r];
if (port < 0) return;
PORT_REDIRECT(port);
#endif
SERIAL_FLUSH_P(port);
SERIAL_ECHOPGM_P(port, MSG_RESEND);
SERIAL_ECHOLN_P(port, gcode_LastN + 1);
SERIAL_FLUSH();
SERIAL_ECHOPGM(MSG_RESEND);
SERIAL_ECHOLN(gcode_LastN + 1);
ok_to_send();
}
@ -270,10 +272,11 @@ inline int read_serial(const uint8_t index) {
}
}
void gcode_line_error(PGM_P err, uint8_t port) {
SERIAL_ERROR_START_P(port);
serialprintPGM_P(port, err);
SERIAL_ECHOLN_P(port, gcode_LastN);
void gcode_line_error(PGM_P const err, const int8_t port) {
PORT_REDIRECT(port);
SERIAL_ERROR_START();
serialprintPGM(err);
SERIAL_ECHOLN(gcode_LastN);
while (read_serial(port) != -1); // clear out the RX buffer
flush_and_request_resend();
serial_count[port] = 0;
@ -281,12 +284,6 @@ void gcode_line_error(PGM_P err, uint8_t port) {
#if ENABLED(FAST_FILE_TRANSFER)
#if ENABLED(SDSUPPORT)
#define CARD_CHAR_P(C) SERIAL_CHAR_P(card.transfer_port, C)
#define CARD_ECHO_P(V) SERIAL_ECHO_P(card.transfer_port, V)
#define CARD_ECHOLN_P(V) SERIAL_ECHOLN_P(card.transfer_port, V)
#endif
inline bool serial_data_available(const uint8_t index) {
switch (index) {
case 0: return MYSERIAL0.available();
@ -380,6 +377,11 @@ void gcode_line_error(PGM_P err, uint8_t port) {
void receive(char (&buffer)[buffer_size]) {
uint8_t data = 0;
millis_t transfer_timeout = millis() + RX_TIMESLICE;
#if ENABLED(SDSUPPORT)
PORT_REDIRECT(card.transfer_port);
#endif
while (PENDING(millis(), transfer_timeout)) {
switch (stream_state) {
case StreamState::STREAM_RESET:
@ -388,24 +390,24 @@ void gcode_line_error(PGM_P err, uint8_t port) {
packet_reset();
stream_state = StreamState::PACKET_HEADER;
break;
case StreamState::STREAM_HEADER: // we could also transfer the filename in this packet, rather than handling it in the gcode
for (size_t i = 0; i < sizeof(stream_header); ++i) {
case StreamState::STREAM_HEADER: // The filename could also be in this packet, rather than handling it in the gcode
for (size_t i = 0; i < sizeof(stream_header); ++i)
stream_header_bytes[i] = buffer[i];
}
if (stream_header.token == 0x1234) {
stream_state = StreamState::PACKET_RESET;
bytes_received = 0;
time_stream_start = millis();
CARD_ECHO_P("echo: Datastream initialized (");
CARD_ECHO_P(stream_header.filesize);
CARD_ECHOLN_P("Bytes expected)");
CARD_ECHO_P("so"); // confirm active stream and the maximum block size supported
CARD_CHAR_P(static_cast<uint8_t>(buffer_size & 0xFF));
CARD_CHAR_P(static_cast<uint8_t>((buffer_size >> 8) & 0xFF));
CARD_CHAR_P('\n');
SERIAL_ECHO("echo: Datastream initialized (");
SERIAL_ECHO(stream_header.filesize);
SERIAL_ECHOLN("Bytes expected)");
SERIAL_ECHO("so"); // confirm active stream and the maximum block size supported
SERIAL_CHAR(static_cast<uint8_t>(buffer_size & 0xFF));
SERIAL_CHAR(static_cast<uint8_t>((buffer_size >> 8) & 0xFF));
SERIAL_CHAR('\n');
}
else {
CARD_ECHOLN_P("echo: Datastream initialization error (invalid token)");
SERIAL_ECHOLN("echo: Datastream initialization error (invalid token)");
stream_state = StreamState::STREAM_FAILED;
}
buffer_next_index = 0;
@ -421,7 +423,7 @@ void gcode_line_error(PGM_P err, uint8_t port) {
stream_state = StreamState::PACKET_DATA;
}
else {
CARD_ECHO_P("echo: Datastream packet out of order");
SERIAL_ECHO("echo: Datastream packet out of order");
stream_state = StreamState::PACKET_FLUSHRX;
}
}
@ -433,7 +435,7 @@ void gcode_line_error(PGM_P err, uint8_t port) {
buffer[buffer_next_index] = data;
}
else {
CARD_ECHO_P("echo: Datastream packet data buffer overrun");
SERIAL_ECHO("echo: Datastream packet data buffer overrun");
stream_state = StreamState::STREAM_FAILED;
break;
}
@ -458,22 +460,22 @@ void gcode_line_error(PGM_P err, uint8_t port) {
else {
if (bytes_received < stream_header.filesize) {
stream_state = StreamState::PACKET_RESET; // reset and receive next packet
CARD_ECHOLN_P("ok"); // transmit confirm packet received and valid token
SERIAL_ECHOLN("ok"); // transmit confirm packet received and valid token
}
else {
stream_state = StreamState::STREAM_COMPLETE; // no more data required
}
if (card.write(buffer, buffer_next_index) < 0) {
stream_state = StreamState::STREAM_FAILED;
CARD_ECHO_P("echo: IO ERROR");
SERIAL_ECHO("echo: IO ERROR");
break;
};
}
}
else {
CARD_ECHO_P("echo: Block(");
CARD_ECHO_P(packet.header.id);
CARD_ECHOLN_P(") Corrupt");
SERIAL_ECHO("echo: Block(");
SERIAL_ECHO(packet.header.id);
SERIAL_ECHOLN(") Corrupt");
stream_state = StreamState::PACKET_FLUSHRX;
}
break;
@ -481,9 +483,9 @@ void gcode_line_error(PGM_P err, uint8_t port) {
if (packet_retries < MAX_RETRIES) {
packet_retries ++;
stream_state = StreamState::PACKET_RESET;
CARD_ECHO_P("echo: Resend request ");
CARD_ECHOLN_P(packet_retries);
CARD_ECHOLN_P("rs"); // transmit resend packet token
SERIAL_ECHO("echo: Resend request ");
SERIAL_ECHOLN(packet_retries);
SERIAL_ECHOLN("rs"); // transmit resend packet token
}
else {
stream_state = StreamState::STREAM_FAILED;
@ -499,27 +501,27 @@ void gcode_line_error(PGM_P err, uint8_t port) {
packet.timeout = millis() + STREAM_MAX_WAIT;
break;
case StreamState::PACKET_TIMEOUT:
CARD_ECHOLN_P("echo: Datastream timeout");
SERIAL_ECHOLN("echo: Datastream timeout");
stream_state = StreamState::PACKET_RESEND;
break;
case StreamState::STREAM_COMPLETE:
stream_state = StreamState::STREAM_RESET;
card.flag.binary_mode = false;
card.closefile();
CARD_ECHO_P("echo: ");
CARD_ECHO_P(card.filename);
CARD_ECHO_P(" transfer completed @ ");
CARD_ECHO_P(((bytes_received / (millis() - time_stream_start) * 1000) / 1024 ));
CARD_ECHOLN_P("KiB/s");
CARD_ECHOLN_P("sc"); // transmit stream complete token
SERIAL_ECHO("echo: ");
SERIAL_ECHO(card.filename);
SERIAL_ECHO(" transfer completed @ ");
SERIAL_ECHO(((bytes_received / (millis() - time_stream_start) * 1000) / 1024 ));
SERIAL_ECHOLN("KiB/s");
SERIAL_ECHOLN("sc"); // transmit stream complete token
return;
case StreamState::STREAM_FAILED:
stream_state = StreamState::STREAM_RESET;
card.flag.binary_mode = false;
card.closefile();
card.removeFile(card.filename);
CARD_ECHOLN_P("echo: File transfer failed");
CARD_ECHOLN_P("sf"); // transmit stream failed token
SERIAL_ECHOLN("echo: File transfer failed");
SERIAL_ECHOLN("sf"); // transmit stream failed token
return;
}
}

26
Marlin/src/gcode/sdcard/M20-M30_M32-M34_M524_M928.cpp
View file

@ -50,17 +50,13 @@
* M20: List SD card to serial output
*/
void GcodeSuite::M20() {
#if NUM_SERIAL > 1
const int16_t port = command_queue_port[cmd_queue_index_r];
#endif
SERIAL_ECHOLNPGM_P(port, MSG_BEGIN_FILE_LIST);
SERIAL_ECHOLNPGM(MSG_BEGIN_FILE_LIST);
card.ls(
#if NUM_SERIAL > 1
port
command_queue_port[cmd_queue_index_r]
#endif
);
SERIAL_ECHOLNPGM_P(port, MSG_END_FILE_LIST);
SERIAL_ECHOLNPGM(MSG_END_FILE_LIST);
}
/**
@ -165,11 +161,11 @@ void GcodeSuite::M26() {
*/
void GcodeSuite::M27() {
#if NUM_SERIAL > 1
const int16_t port = command_queue_port[cmd_queue_index_r];
const int16_t port = serial_port_index;
#endif
if (parser.seen('C')) {
SERIAL_ECHOPGM_P(port, "Current file: ");
SERIAL_ECHOPGM("Current file: ");
card.printFilename();
}
@ -197,10 +193,6 @@ void GcodeSuite::M28() {
#if ENABLED(FAST_FILE_TRANSFER)
#if NUM_SERIAL > 1
const int16_t port = command_queue_port[cmd_queue_index_r];
#endif
bool binary_mode = false;
char *p = parser.string_arg;
if (p[0] == 'B' && NUMERIC(p[1])) {
@ -211,12 +203,12 @@ void GcodeSuite::M28() {
// Binary transfer mode
if ((card.flag.binary_mode = binary_mode)) {
SERIAL_ECHO_START_P(port);
SERIAL_ECHO_P(port, " preparing to receive: ");
SERIAL_ECHOLN_P(port, p);
SERIAL_ECHO_START();
SERIAL_ECHO(" preparing to receive: ");
SERIAL_ECHOLN(p);
card.openFile(p, false);
#if NUM_SERIAL > 1
card.transfer_port = port;
card.transfer_port = command_queue_port[cmd_queue_index_r];
#endif
}
else

4
Marlin/src/gcode/stats/M31.cpp
View file

@ -42,6 +42,6 @@ void GcodeSuite::M31() {
elapsed.toString(buffer);
ui.set_status(buffer);
SERIAL_ECHO_START_P(port);
SERIAL_ECHOLNPAIR_P(port, "Print time: ", buffer);
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Print time: ", buffer);
}

6
Marlin/src/gcode/temperature/M105.cpp
View file

@ -40,15 +40,15 @@ void GcodeSuite::M105() {
#endif
#if HAS_TEMP_SENSOR
SERIAL_ECHOPGM_P(port, MSG_OK);
SERIAL_ECHOPGM(MSG_OK);
thermalManager.print_heater_states(target_extruder
#if NUM_SERIAL > 1
, port
#endif
);
#else // !HAS_TEMP_SENSOR
SERIAL_ERROR_MSG_P(port, MSG_ERR_NO_THERMISTORS);
SERIAL_ERROR_MSG(MSG_ERR_NO_THERMISTORS);
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
}

732
Marlin/src/module/configuration_store.cpp
View file

@ -46,20 +46,6 @@
#include "configuration_store.h"
#if ADD_PORT_ARG
#define PORTARG_SOLO const int8_t port
#define PORTARG_BEFORE const int8_t port,
#define PORTARG_AFTER ,const int8_t port
#define PORTVAR_SOLO port
#define PORTVAR_BEFORE port,
#else
#define PORTARG_SOLO
#define PORTARG_BEFORE
#define PORTARG_AFTER
#define PORTVAR_SOLO
#define PORTVAR_BEFORE
#endif
#include "endstops.h"
#include "planner.h"
#include "stepper.h"
@ -394,33 +380,33 @@ void MarlinSettings::postprocess() {
#endif // SD_FIRMWARE_UPDATE
#if ENABLED(EEPROM_CHITCHAT)
#define CHITCHAT_ECHO(V) SERIAL_ECHO(V)
#define CHITCHAT_ECHOLNPGM(STR) SERIAL_ECHOLNPGM(STR)
#define CHITCHAT_ECHOPAIR(STR,V) SERIAL_ECHOPAIR(STR,V)
#define CHITCHAT_ECHOLNPAIR(STR,V) SERIAL_ECHOLNPAIR(STR,V)
#define CHITCHAT_ECHO_START_P(port) SERIAL_ECHO_START_P(port)
#define CHITCHAT_ERROR_START_P(port) SERIAL_ERROR_START_P(port)
#define CHITCHAT_ERROR_MSG_P(port, STR) SERIAL_ERROR_MSG_P(port, STR)
#define CHITCHAT_ECHO_P(port, VAL) SERIAL_ECHO_P(port, VAL)
#define CHITCHAT_ECHOPGM_P(port, STR) SERIAL_ECHOPGM_P(port, STR)
#define CHITCHAT_ECHOLNPGM_P(port, STR) SERIAL_ECHOLNPGM_P(port, STR)
#define CHITCHAT_ECHOPAIR_P(port, STR, VAL) SERIAL_ECHOPAIR_P(port, STR, VAL)
#define CHITCHAT_ECHOLNPAIR_P(port, STR, VAL) SERIAL_ECHOLNPAIR_P(port, STR, VAL)
#define CHITCHAT_EOL() SERIAL_EOL()
#define CHITCHAT_ECHO(V) SERIAL_ECHO(V)
#define CHITCHAT_ECHOLNPGM(STR) SERIAL_ECHOLNPGM(STR)
#define CHITCHAT_ECHOPAIR(STR,V) SERIAL_ECHOPAIR(STR,V)
#define CHITCHAT_ECHOLNPAIR(STR,V) SERIAL_ECHOLNPAIR(STR,V)
#define CHITCHAT_ECHO_START() SERIAL_ECHO_START()
#define CHITCHAT_ERROR_START() SERIAL_ERROR_START()
#define CHITCHAT_ERROR_MSG(STR) SERIAL_ERROR_MSG(STR)
#define CHITCHAT_ECHO(VAL) SERIAL_ECHO(VAL)
#define CHITCHAT_ECHOPGM(STR) SERIAL_ECHOPGM(STR)
#define CHITCHAT_ECHOLNPGM(STR) SERIAL_ECHOLNPGM(STR)
#define CHITCHAT_ECHOPAIR(STR, VAL) SERIAL_ECHOPAIR(STR, VAL)
#define CHITCHAT_ECHOLNPAIR(STR, VAL) SERIAL_ECHOLNPAIR(STR, VAL)
#define CHITCHAT_EOL() SERIAL_EOL()
#else
#define CHITCHAT_ECHO(V) NOOP
#define CHITCHAT_ECHOLNPGM(STR) NOOP
#define CHITCHAT_ECHOPAIR(STR,V) NOOP
#define CHITCHAT_ECHOLNPAIR(STR,V) NOOP
#define CHITCHAT_ECHO_START_P(port) NOOP
#define CHITCHAT_ERROR_START_P(port) NOOP
#define CHITCHAT_ERROR_MSG_P(port, STR) NOOP
#define CHITCHAT_ECHO_P(port, VAL) NOOP
#define CHITCHAT_ECHOPGM_P(port, STR) NOOP
#define CHITCHAT_ECHOLNPGM_P(port, STR) NOOP
#define CHITCHAT_ECHOPAIR_P(port, STR, VAL) NOOP
#define CHITCHAT_ECHOLNPAIR_P(port, STR, VAL) NOOP
#define CHITCHAT_EOL() NOOP
#define CHITCHAT_ECHO(V) NOOP
#define CHITCHAT_ECHOLNPGM(STR) NOOP
#define CHITCHAT_ECHOPAIR(STR,V) NOOP
#define CHITCHAT_ECHOLNPAIR(STR,V) NOOP
#define CHITCHAT_ECHO_START() NOOP
#define CHITCHAT_ERROR_START() NOOP
#define CHITCHAT_ERROR_MSG(STR) NOOP
#define CHITCHAT_ECHO(VAL) NOOP
#define CHITCHAT_ECHOPGM(STR) NOOP
#define CHITCHAT_ECHOLNPGM(STR) NOOP
#define CHITCHAT_ECHOPAIR(STR, VAL) NOOP
#define CHITCHAT_ECHOLNPAIR(STR, VAL) NOOP
#define CHITCHAT_EOL() NOOP
#endif
#if ENABLED(EEPROM_SETTINGS)
@ -431,7 +417,7 @@ void MarlinSettings::postprocess() {
#define EEPROM_WRITE(VAR) persistentStore.write_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc)
#define EEPROM_READ(VAR) persistentStore.read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc, !validating)
#define EEPROM_READ_ALWAYS(VAR) persistentStore.read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc)
#define EEPROM_ASSERT(TST,ERR) do{ if (!(TST)) { SERIAL_ERROR_MSG_P(port, ERR); eeprom_error = true; } }while(0)
#define EEPROM_ASSERT(TST,ERR) do{ if (!(TST)) { SERIAL_ERROR_MSG(ERR); eeprom_error = true; } }while(0)
#if ENABLED(DEBUG_EEPROM_READWRITE)
#define _FIELD_TEST(FIELD) \
@ -447,9 +433,9 @@ void MarlinSettings::postprocess() {
bool MarlinSettings::eeprom_error, MarlinSettings::validating;
bool MarlinSettings::size_error(const uint16_t size PORTARG_AFTER) {
bool MarlinSettings::size_error(const uint16_t size) {
if (size != datasize()) {
CHITCHAT_ERROR_MSG_P(port, "EEPROM datasize error.");
CHITCHAT_ERROR_MSG("EEPROM datasize error.");
return true;
}
return false;
@ -458,7 +444,7 @@ void MarlinSettings::postprocess() {
/**
* M500 - Store Configuration
*/
bool MarlinSettings::save(PORTARG_SOLO) {
bool MarlinSettings::save() {
float dummy = 0;
char ver[4] = "ERR";
@ -1125,10 +1111,10 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(final_crc);
// Report storage size
CHITCHAT_ECHO_START_P(port);
CHITCHAT_ECHOPAIR_P(port, "Settings Stored (", eeprom_size);
CHITCHAT_ECHOPAIR_P(port, " bytes; crc ", (uint32_t)final_crc);
CHITCHAT_ECHOLNPGM_P(port, ")");
CHITCHAT_ECHO_START();
CHITCHAT_ECHOPAIR("Settings Stored (", eeprom_size);
CHITCHAT_ECHOPAIR(" bytes; crc ", (uint32_t)final_crc);
CHITCHAT_ECHOLNPGM(")");
eeprom_error |= size_error(eeprom_size);
}
@ -1148,7 +1134,7 @@ void MarlinSettings::postprocess() {
/**
* M501 - Retrieve Configuration
*/
bool MarlinSettings::_load(PORTARG_SOLO) {
bool MarlinSettings::_load() {
uint16_t working_crc = 0;
EEPROM_START();
@ -1165,10 +1151,10 @@ void MarlinSettings::postprocess() {
stored_ver[0] = '?';
stored_ver[1] = '\0';
}
CHITCHAT_ECHO_START_P(port);
CHITCHAT_ECHOPGM_P(port, "EEPROM version mismatch ");
CHITCHAT_ECHOPAIR_P(port, "(EEPROM=", stored_ver);
CHITCHAT_ECHOLNPGM_P(port, " Marlin=" EEPROM_VERSION ")");
CHITCHAT_ECHO_START();
CHITCHAT_ECHOPGM("EEPROM version mismatch ");
CHITCHAT_ECHOPAIR("(EEPROM=", stored_ver);
CHITCHAT_ECHOLNPGM(" Marlin=" EEPROM_VERSION ")");
eeprom_error = true;
}
else {
@ -1833,25 +1819,25 @@ void MarlinSettings::postprocess() {
eeprom_error = size_error(eeprom_index - (EEPROM_OFFSET));
if (eeprom_error) {
CHITCHAT_ECHO_START_P(port);
CHITCHAT_ECHOPAIR_P(port, "Index: ", int(eeprom_index - (EEPROM_OFFSET)));
CHITCHAT_ECHOLNPAIR_P(port, " Size: ", datasize());
CHITCHAT_ECHO_START();
CHITCHAT_ECHOPAIR("Index: ", int(eeprom_index - (EEPROM_OFFSET)));
CHITCHAT_ECHOLNPAIR(" Size: ", datasize());
}
else if (working_crc != stored_crc) {
eeprom_error = true;
CHITCHAT_ERROR_START_P(port);
CHITCHAT_ECHOPGM_P(port, "EEPROM CRC mismatch - (stored) ");
CHITCHAT_ECHO_P(port, stored_crc);
CHITCHAT_ECHOPGM_P(port, " != ");
CHITCHAT_ECHO_P(port, working_crc);
CHITCHAT_ECHOLNPGM_P(port, " (calculated)!");
CHITCHAT_ERROR_START();
CHITCHAT_ECHOPGM("EEPROM CRC mismatch - (stored) ");
CHITCHAT_ECHO(stored_crc);
CHITCHAT_ECHOPGM(" != ");
CHITCHAT_ECHO(working_crc);
CHITCHAT_ECHOLNPGM(" (calculated)!");
}
else if (!validating) {
CHITCHAT_ECHO_START_P(port);
CHITCHAT_ECHO_P(port, version);
CHITCHAT_ECHOPAIR_P(port, " stored settings retrieved (", eeprom_index - (EEPROM_OFFSET));
CHITCHAT_ECHOPAIR_P(port, " bytes; crc ", (uint32_t)working_crc);
CHITCHAT_ECHOLNPGM_P(port, ")");
CHITCHAT_ECHO_START();
CHITCHAT_ECHO(version);
CHITCHAT_ECHOPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET));
CHITCHAT_ECHOPAIR(" bytes; crc ", (uint32_t)working_crc);
CHITCHAT_ECHOLNPGM(")");
}
if (!validating && !eeprom_error) postprocess();
@ -1861,52 +1847,52 @@ void MarlinSettings::postprocess() {
ubl.report_state();
if (!ubl.sanity_check()) {
SERIAL_EOL_P(port);
SERIAL_EOL();
#if ENABLED(EEPROM_CHITCHAT)
ubl.echo_name();
CHITCHAT_ECHOLNPGM_P(port, " initialized.\n");
CHITCHAT_ECHOLNPGM(" initialized.\n");
#endif
}
else {
eeprom_error = true;
#if ENABLED(EEPROM_CHITCHAT)
CHITCHAT_ECHOPGM_P(port, "?Can't enable ");
CHITCHAT_ECHOPGM("?Can't enable ");
ubl.echo_name();
CHITCHAT_ECHOLNPGM_P(port, ".");
CHITCHAT_ECHOLNPGM(".");
#endif
ubl.reset();
}
if (ubl.storage_slot >= 0) {
load_mesh(ubl.storage_slot);
CHITCHAT_ECHOPAIR_P(port, "Mesh ", ubl.storage_slot);
CHITCHAT_ECHOLNPGM_P(port, " loaded from storage.");
CHITCHAT_ECHOPAIR("Mesh ", ubl.storage_slot);
CHITCHAT_ECHOLNPGM(" loaded from storage.");
}
else {
ubl.reset();
CHITCHAT_ECHOLNPGM_P(port, "UBL System reset()");
CHITCHAT_ECHOLNPGM("UBL System reset()");
}
}
#endif
}
#if ENABLED(EEPROM_CHITCHAT) && DISABLED(DISABLE_M503)
if (!validating) report(PORTVAR_SOLO);
if (!validating) report();
#endif
EEPROM_FINISH();
return !eeprom_error;
}
bool MarlinSettings::validate(PORTARG_SOLO) {
bool MarlinSettings::validate() {
validating = true;
const bool success = _load(PORTVAR_SOLO);
const bool success = _load();
validating = false;
return success;
}
bool MarlinSettings::load(PORTARG_SOLO) {
if (validate(PORTVAR_SOLO)) return _load(PORTVAR_SOLO);
bool MarlinSettings::load() {
if (validate()) return _load();
reset();
return true;
}
@ -2009,8 +1995,8 @@ void MarlinSettings::postprocess() {
#else // !EEPROM_SETTINGS
bool MarlinSettings::save(PORTARG_SOLO) {
CHITCHAT_ERROR_MSG_P(port, "EEPROM disabled");
bool MarlinSettings::save() {
CHITCHAT_ERROR_MSG("EEPROM disabled");
return false;
}
@ -2019,7 +2005,7 @@ void MarlinSettings::postprocess() {
/**
* M502 - Reset Configuration
*/
void MarlinSettings::reset(PORTARG_SOLO) {
void MarlinSettings::reset() {
static const float tmp1[] PROGMEM = DEFAULT_AXIS_STEPS_PER_UNIT, tmp2[] PROGMEM = DEFAULT_MAX_FEEDRATE;
static const uint32_t tmp3[] PROGMEM = DEFAULT_MAX_ACCELERATION;
LOOP_XYZE_N(i) {
@ -2325,91 +2311,72 @@ void MarlinSettings::reset(PORTARG_SOLO) {
postprocess();
CHITCHAT_ECHO_START_P(port);
CHITCHAT_ECHOLNPGM_P(port, "Hardcoded Default Settings Loaded");
CHITCHAT_ECHO_START();
CHITCHAT_ECHOLNPGM("Hardcoded Default Settings Loaded");
}
#if DISABLED(DISABLE_M503)
#define CONFIG_ECHO_START() do{ if (!forReplay) SERIAL_ECHO_START_P(port); }while(0)
#define CONFIG_ECHO_MSG(STR) do{ CONFIG_ECHO_START(); SERIAL_ECHOLNPGM_P(port, STR); }while(0)
#define CONFIG_ECHO_HEADING(STR) do{ if (!forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOLNPGM_P(port, STR); } }while(0)
#define CONFIG_ECHO_START() do{ if (!forReplay) SERIAL_ECHO_START(); }while(0)
#define CONFIG_ECHO_MSG(STR) do{ CONFIG_ECHO_START(); SERIAL_ECHOLNPGM(STR); }while(0)
#define CONFIG_ECHO_HEADING(STR) do{ if (!forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOLNPGM(STR); } }while(0)
#if HAS_TRINAMIC
void say_M906(PORTARG_SOLO) { SERIAL_ECHOPGM_P(port, " M906"); }
void say_M906() { SERIAL_ECHOPGM(" M906"); }
#if HAS_STEALTHCHOP
void say_M569(PORTARG_BEFORE const char * const etc=NULL) {
SERIAL_ECHOPGM_P(port, " M569 S1");
void say_M569(const char * const etc=NULL) {
SERIAL_ECHOPGM(" M569 S1");
if (etc) {
SERIAL_CHAR_P(port, ' ');
serialprintPGM_P(port, etc);
SERIAL_EOL_P(port);
SERIAL_CHAR(' ');
serialprintPGM(etc);
SERIAL_EOL();
}
}
#endif
#if ENABLED(HYBRID_THRESHOLD)
void say_M913(PORTARG_SOLO) { SERIAL_ECHOPGM_P(port, " M913"); }
void say_M913() { SERIAL_ECHOPGM(" M913"); }
#endif
#if USE_SENSORLESS
void say_M914(PORTARG_SOLO) { SERIAL_ECHOPGM_P(port, " M914"); }
void say_M914() { SERIAL_ECHOPGM(" M914"); }
#endif
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
void say_M603(PORTARG_SOLO) { SERIAL_ECHOPGM_P(port, " M603 "); }
void say_M603() { SERIAL_ECHOPGM(" M603 "); }
#endif
inline void say_units(
#if NUM_SERIAL > 1
const int8_t port,
#endif
const bool colon
) {
serialprintPGM_P(port,
inline void say_units(const bool colon) {
serialprintPGM(
#if ENABLED(INCH_MODE_SUPPORT)
parser.linear_unit_factor != 1.0 ? PSTR(" (in)") :
#endif
PSTR(" (mm)")
);
if (colon) SERIAL_ECHOLNPGM_P(port, ":");
if (colon) SERIAL_ECHOLNPGM(":");
}
#if NUM_SERIAL > 1
#define SAY_UNITS_P(PORT, COLON) say_units(PORT, COLON)
#else
#define SAY_UNITS_P(PORT, COLON) say_units(COLON)
#endif
void report_M92(
#if NUM_SERIAL > 1
const int8_t port,
#endif
const bool echo=true, const int8_t e=-1
);
void report_M92(const bool echo=true, const int8_t e=-1);
/**
* M503 - Report current settings in RAM
*
* Unless specifically disabled, M503 is available even without EEPROM
*/
void MarlinSettings::report(const bool forReplay
#if NUM_SERIAL > 1
, const int8_t port/*=-1*/
#endif
) {
void MarlinSettings::report(const bool forReplay) {
/**
* Announce current units, in case inches are being displayed
*/
CONFIG_ECHO_START();
#if ENABLED(INCH_MODE_SUPPORT)
SERIAL_ECHOPGM_P(port, " G2");
SERIAL_CHAR_P(port, parser.linear_unit_factor == 1.0 ? '1' : '0');
SERIAL_ECHOPGM_P(port, " ;");
SAY_UNITS_P(port, false);
SERIAL_ECHOPGM(" G2");
SERIAL_CHAR(parser.linear_unit_factor == 1.0 ? '1' : '0');
SERIAL_ECHOPGM(" ;");
say_units(false);
#else
SERIAL_ECHOPGM_P(port, " G21 ; Units in mm");
SAY_UNITS_P(port, false);
SERIAL_ECHOPGM(" G21 ; Units in mm");
say_units(false);
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
#if HAS_LCD_MENU
@ -2417,17 +2384,17 @@ void MarlinSettings::reset(PORTARG_SOLO) {
CONFIG_ECHO_START();
#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
SERIAL_ECHOPGM_P(port, " M149 ");
SERIAL_CHAR_P(port, parser.temp_units_code());
SERIAL_ECHOPGM_P(port, " ; Units in ");
serialprintPGM_P(port, parser.temp_units_name());
SERIAL_ECHOPGM(" M149 ");
SERIAL_CHAR(parser.temp_units_code());
SERIAL_ECHOPGM(" ; Units in ");
serialprintPGM(parser.temp_units_name());
#else
SERIAL_ECHOLNPGM_P(port, " M149 C ; Units in Celsius");
SERIAL_ECHOLNPGM(" M149 C ; Units in Celsius");
#endif
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
#if DISABLED(NO_VOLUMETRICS)
@ -2436,36 +2403,36 @@ void MarlinSettings::reset(PORTARG_SOLO) {
*/
if (!forReplay) {
CONFIG_ECHO_START();
SERIAL_ECHOPGM_P(port, "Filament settings:");
SERIAL_ECHOPGM("Filament settings:");
if (parser.volumetric_enabled)
SERIAL_EOL_P(port);
SERIAL_EOL();
else
SERIAL_ECHOLNPGM_P(port, " Disabled");
SERIAL_ECHOLNPGM(" Disabled");
}
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M200 D", LINEAR_UNIT(planner.filament_size[0]));
SERIAL_EOL_P(port);
SERIAL_ECHOPAIR(" M200 D", LINEAR_UNIT(planner.filament_size[0]));
SERIAL_EOL();
#if EXTRUDERS > 1
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M200 T1 D", LINEAR_UNIT(planner.filament_size[1]));
SERIAL_EOL_P(port);
SERIAL_ECHOPAIR(" M200 T1 D", LINEAR_UNIT(planner.filament_size[1]));
SERIAL_EOL();
#if EXTRUDERS > 2
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M200 T2 D", LINEAR_UNIT(planner.filament_size[2]));
SERIAL_EOL_P(port);
SERIAL_ECHOPAIR(" M200 T2 D", LINEAR_UNIT(planner.filament_size[2]));
SERIAL_EOL();
#if EXTRUDERS > 3
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M200 T3 D", LINEAR_UNIT(planner.filament_size[3]));
SERIAL_EOL_P(port);
SERIAL_ECHOPAIR(" M200 T3 D", LINEAR_UNIT(planner.filament_size[3]));
SERIAL_EOL();
#if EXTRUDERS > 4
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M200 T4 D", LINEAR_UNIT(planner.filament_size[4]));
SERIAL_EOL_P(port);
SERIAL_ECHOPAIR(" M200 T4 D", LINEAR_UNIT(planner.filament_size[4]));
SERIAL_EOL();
#if EXTRUDERS > 5
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M200 T5 D", LINEAR_UNIT(planner.filament_size[5]));
SERIAL_EOL_P(port);
SERIAL_ECHOPAIR(" M200 T5 D", LINEAR_UNIT(planner.filament_size[5]));
SERIAL_EOL();
#endif // EXTRUDERS > 5
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
@ -2478,102 +2445,97 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#endif // !NO_VOLUMETRICS
CONFIG_ECHO_HEADING("Steps per unit:");
report_M92(
#if NUM_SERIAL > 1
port,
#endif
!forReplay
);
report_M92(!forReplay);
CONFIG_ECHO_HEADING("Maximum feedrates (units/s):");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M203 X", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[X_AXIS]));
SERIAL_ECHOPAIR_P(port, " Y", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Y_AXIS]));
SERIAL_ECHOPAIR_P(port, " Z", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Z_AXIS]));
SERIAL_ECHOPAIR(" M203 X", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Y_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Z_AXIS]));
#if DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR_P(port, " E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS]));
SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS]));
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
#if ENABLED(DISTINCT_E_FACTORS)
CONFIG_ECHO_START();
for (uint8_t i = 0; i < E_STEPPERS; i++) {
SERIAL_ECHOPAIR_P(port, " M203 T", (int)i);
SERIAL_ECHOLNPAIR_P(port, " E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS_N(i)]));
SERIAL_ECHOPAIR(" M203 T", (int)i);
SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS_N(i)]));
}
#endif
CONFIG_ECHO_HEADING("Maximum Acceleration (units/s2):");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M201 X", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[X_AXIS]));
SERIAL_ECHOPAIR_P(port, " Y", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Y_AXIS]));
SERIAL_ECHOPAIR_P(port, " Z", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Z_AXIS]));
SERIAL_ECHOPAIR(" M201 X", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Y_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Z_AXIS]));
#if DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR_P(port, " E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS]));
SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS]));
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
#if ENABLED(DISTINCT_E_FACTORS)
CONFIG_ECHO_START();
for (uint8_t i = 0; i < E_STEPPERS; i++) {
SERIAL_ECHOPAIR_P(port, " M201 T", (int)i);
SERIAL_ECHOLNPAIR_P(port, " E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(i)]));
SERIAL_ECHOPAIR(" M201 T", (int)i);
SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(i)]));
}
#endif
CONFIG_ECHO_HEADING("Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M204 P", LINEAR_UNIT(planner.settings.acceleration));
SERIAL_ECHOPAIR_P(port, " R", LINEAR_UNIT(planner.settings.retract_acceleration));
SERIAL_ECHOLNPAIR_P(port, " T", LINEAR_UNIT(planner.settings.travel_acceleration));
SERIAL_ECHOPAIR(" M204 P", LINEAR_UNIT(planner.settings.acceleration));
SERIAL_ECHOPAIR(" R", LINEAR_UNIT(planner.settings.retract_acceleration));
SERIAL_ECHOLNPAIR(" T", LINEAR_UNIT(planner.settings.travel_acceleration));
if (!forReplay) {
CONFIG_ECHO_START();
SERIAL_ECHOPGM_P(port, "Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate>");
SERIAL_ECHOPGM("Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate>");
#if ENABLED(JUNCTION_DEVIATION)
SERIAL_ECHOPGM_P(port, " J<junc_dev>");
SERIAL_ECHOPGM(" J<junc_dev>");
#endif
#if HAS_CLASSIC_JERK
SERIAL_ECHOPGM_P(port, " X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk>");
SERIAL_ECHOPGM(" X<max_x_jerk> Y<max_y_jerk> Z<max_z_jerk>");
#if DISABLED(JUNCTION_DEVIATION) || DISABLED(LIN_ADVANCE)
SERIAL_ECHOPGM_P(port, " E<max_e_jerk>");
SERIAL_ECHOPGM(" E<max_e_jerk>");
#endif
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
}
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M205 B", LINEAR_UNIT(planner.settings.min_segment_time_us));
SERIAL_ECHOPAIR_P(port, " S", LINEAR_UNIT(planner.settings.min_feedrate_mm_s));
SERIAL_ECHOPAIR_P(port, " T", LINEAR_UNIT(planner.settings.min_travel_feedrate_mm_s));
SERIAL_ECHOPAIR(" M205 B", LINEAR_UNIT(planner.settings.min_segment_time_us));
SERIAL_ECHOPAIR(" S", LINEAR_UNIT(planner.settings.min_feedrate_mm_s));
SERIAL_ECHOPAIR(" T", LINEAR_UNIT(planner.settings.min_travel_feedrate_mm_s));
#if ENABLED(JUNCTION_DEVIATION)
SERIAL_ECHOPAIR_P(port, " J", LINEAR_UNIT(planner.junction_deviation_mm));
SERIAL_ECHOPAIR(" J", LINEAR_UNIT(planner.junction_deviation_mm));
#endif
#if HAS_CLASSIC_JERK
SERIAL_ECHOPAIR_P(port, " X", LINEAR_UNIT(planner.max_jerk[X_AXIS]));
SERIAL_ECHOPAIR_P(port, " Y", LINEAR_UNIT(planner.max_jerk[Y_AXIS]));
SERIAL_ECHOPAIR_P(port, " Z", LINEAR_UNIT(planner.max_jerk[Z_AXIS]));
SERIAL_ECHOPAIR(" X", LINEAR_UNIT(planner.max_jerk[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_jerk[Y_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_jerk[Z_AXIS]));
#if DISABLED(JUNCTION_DEVIATION) || DISABLED(LIN_ADVANCE)
SERIAL_ECHOPAIR_P(port, " E", LINEAR_UNIT(planner.max_jerk[E_AXIS]));
SERIAL_ECHOPAIR(" E", LINEAR_UNIT(planner.max_jerk[E_AXIS]));
#endif
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
#if HAS_M206_COMMAND
CONFIG_ECHO_HEADING("Home offset:");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M206 X", LINEAR_UNIT(home_offset[X_AXIS]));
SERIAL_ECHOPAIR_P(port, " Y", LINEAR_UNIT(home_offset[Y_AXIS]));
SERIAL_ECHOLNPAIR_P(port, " Z", LINEAR_UNIT(home_offset[Z_AXIS]));
SERIAL_ECHOPAIR(" M206 X", LINEAR_UNIT(home_offset[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(home_offset[Y_AXIS]));
SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(home_offset[Z_AXIS]));
#endif
#if HAS_HOTEND_OFFSET
CONFIG_ECHO_HEADING("Hotend offsets:");
CONFIG_ECHO_START();
for (uint8_t e = 1; e < HOTENDS; e++) {
SERIAL_ECHOPAIR_P(port, " M218 T", (int)e);
SERIAL_ECHOPAIR_P(port, " X", LINEAR_UNIT(hotend_offset[X_AXIS][e]));
SERIAL_ECHOPAIR_P(port, " Y", LINEAR_UNIT(hotend_offset[Y_AXIS][e]));
SERIAL_ECHOLNPAIR_F_P(port, " Z", LINEAR_UNIT(hotend_offset[Z_AXIS][e]), 3);
SERIAL_ECHOPAIR(" M218 T", (int)e);
SERIAL_ECHOPAIR(" X", LINEAR_UNIT(hotend_offset[X_AXIS][e]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(hotend_offset[Y_AXIS][e]));
SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(hotend_offset[Z_AXIS][e]), 3);
}
#endif
@ -2591,7 +2553,7 @@ void MarlinSettings::reset(PORTARG_SOLO) {
if (!forReplay) {
CONFIG_ECHO_START();
ubl.echo_name();
SERIAL_ECHOLNPGM_P(port, ":");
SERIAL_ECHOLNPGM(":");
}
#elif HAS_ABL
@ -2601,11 +2563,11 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#endif
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M420 S", planner.leveling_active ? 1 : 0);
SERIAL_ECHOPAIR(" M420 S", planner.leveling_active ? 1 : 0);
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
SERIAL_ECHOPAIR_P(port, " Z", LINEAR_UNIT(planner.z_fade_height));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height));
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
#if ENABLED(MESH_BED_LEVELING)
@ -2613,9 +2575,9 @@ void MarlinSettings::reset(PORTARG_SOLO) {
for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) {
for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " G29 S3 X", (int)px + 1);
SERIAL_ECHOPAIR_P(port, " Y", (int)py + 1);
SERIAL_ECHOLNPAIR_F_P(port, " Z", LINEAR_UNIT(mbl.z_values[px][py]), 5);
SERIAL_ECHOPAIR(" G29 S3 X", (int)px + 1);
SERIAL_ECHOPAIR(" Y", (int)py + 1);
SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(mbl.z_values[px][py]), 5);
}
}
}
@ -2623,14 +2585,14 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#elif ENABLED(AUTO_BED_LEVELING_UBL)
if (!forReplay) {
SERIAL_EOL_P(port);
SERIAL_EOL();
ubl.report_state();
SERIAL_ECHOLNPAIR_P(port, "\nActive Mesh Slot: ", ubl.storage_slot);
SERIAL_ECHOPAIR_P(port, "EEPROM can hold ", calc_num_meshes());
SERIAL_ECHOLNPGM_P(port, " meshes.\n");
SERIAL_ECHOLNPAIR("\nActive Mesh Slot: ", ubl.storage_slot);
SERIAL_ECHOPAIR("EEPROM can hold ", calc_num_meshes());
SERIAL_ECHOLNPGM(" meshes.\n");
}
//ubl.report_current_mesh(PORTVAR_SOLO); // This is too verbose for large meshes. A better (more terse)
//ubl.report_current_mesh(); // This is too verbose for large meshes. A better (more terse)
// solution needs to be found.
#elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
@ -2638,9 +2600,9 @@ void MarlinSettings::reset(PORTARG_SOLO) {
for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) {
for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " G29 W I", (int)px);
SERIAL_ECHOPAIR_P(port, " J", (int)py);
SERIAL_ECHOLNPAIR_F_P(port, " Z", LINEAR_UNIT(z_values[px][py]), 5);
SERIAL_ECHOPAIR(" G29 W I", (int)px);
SERIAL_ECHOPAIR(" J", (int)py);
SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(z_values[px][py]), 5);
}
}
}
@ -2665,10 +2627,10 @@ void MarlinSettings::reset(PORTARG_SOLO) {
case Z_PROBE_SERVO_NR:
#endif
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M281 P", int(i));
SERIAL_ECHOPAIR_P(port, " L", servo_angles[i][0]);
SERIAL_ECHOPAIR_P(port, " U", servo_angles[i][1]);
SERIAL_EOL_P(port);
SERIAL_ECHOPAIR(" M281 P", int(i));
SERIAL_ECHOPAIR(" L", servo_angles[i][0]);
SERIAL_ECHOPAIR(" U", servo_angles[i][1]);
SERIAL_EOL();
default: break;
}
}
@ -2679,51 +2641,51 @@ void MarlinSettings::reset(PORTARG_SOLO) {
CONFIG_ECHO_HEADING("SCARA settings: S<seg-per-sec> P<theta-psi-offset> T<theta-offset>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M665 S", delta_segments_per_second);
SERIAL_ECHOPAIR_P(port, " P", scara_home_offset[A_AXIS]);
SERIAL_ECHOPAIR_P(port, " T", scara_home_offset[B_AXIS]);
SERIAL_ECHOPAIR_P(port, " Z", LINEAR_UNIT(scara_home_offset[Z_AXIS]));
SERIAL_EOL_P(port);
SERIAL_ECHOPAIR(" M665 S", delta_segments_per_second);
SERIAL_ECHOPAIR(" P", scara_home_offset[A_AXIS]);
SERIAL_ECHOPAIR(" T", scara_home_offset[B_AXIS]);
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(scara_home_offset[Z_AXIS]));
SERIAL_EOL();
#elif ENABLED(DELTA)
CONFIG_ECHO_HEADING("Endstop adjustment:");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M666 X", LINEAR_UNIT(delta_endstop_adj[X_AXIS]));
SERIAL_ECHOPAIR_P(port, " Y", LINEAR_UNIT(delta_endstop_adj[Y_AXIS]));
SERIAL_ECHOLNPAIR_P(port, " Z", LINEAR_UNIT(delta_endstop_adj[Z_AXIS]));
SERIAL_ECHOPAIR(" M666 X", LINEAR_UNIT(delta_endstop_adj[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(delta_endstop_adj[Y_AXIS]));
SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(delta_endstop_adj[Z_AXIS]));
CONFIG_ECHO_HEADING("Delta settings: L<diagonal_rod> R<radius> H<height> S<segments_per_s> B<calibration radius> XYZ<tower angle corrections>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M665 L", LINEAR_UNIT(delta_diagonal_rod));
SERIAL_ECHOPAIR_P(port, " R", LINEAR_UNIT(delta_radius));
SERIAL_ECHOPAIR_P(port, " H", LINEAR_UNIT(delta_height));
SERIAL_ECHOPAIR_P(port, " S", delta_segments_per_second);
SERIAL_ECHOPAIR_P(port, " B", LINEAR_UNIT(delta_calibration_radius));
SERIAL_ECHOPAIR_P(port, " X", LINEAR_UNIT(delta_tower_angle_trim[A_AXIS]));
SERIAL_ECHOPAIR_P(port, " Y", LINEAR_UNIT(delta_tower_angle_trim[B_AXIS]));
SERIAL_ECHOPAIR_P(port, " Z", LINEAR_UNIT(delta_tower_angle_trim[C_AXIS]));
SERIAL_EOL_P(port);
SERIAL_ECHOPAIR(" M665 L", LINEAR_UNIT(delta_diagonal_rod));
SERIAL_ECHOPAIR(" R", LINEAR_UNIT(delta_radius));
SERIAL_ECHOPAIR(" H", LINEAR_UNIT(delta_height));
SERIAL_ECHOPAIR(" S", delta_segments_per_second);
SERIAL_ECHOPAIR(" B", LINEAR_UNIT(delta_calibration_radius));
SERIAL_ECHOPAIR(" X", LINEAR_UNIT(delta_tower_angle_trim[A_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(delta_tower_angle_trim[B_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(delta_tower_angle_trim[C_AXIS]));
SERIAL_EOL();
#elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS)
CONFIG_ECHO_HEADING("Endstop adjustment:");
CONFIG_ECHO_START();
SERIAL_ECHOPGM_P(port, " M666");
SERIAL_ECHOPGM(" M666");
#if ENABLED(X_DUAL_ENDSTOPS)
SERIAL_ECHOPAIR_P(port, " X", LINEAR_UNIT(endstops.x2_endstop_adj));
SERIAL_ECHOPAIR(" X", LINEAR_UNIT(endstops.x2_endstop_adj));
#endif
#if ENABLED(Y_DUAL_ENDSTOPS)
SERIAL_ECHOPAIR_P(port, " Y", LINEAR_UNIT(endstops.y2_endstop_adj));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(endstops.y2_endstop_adj));
#endif
#if ENABLED(Z_TRIPLE_ENDSTOPS)
SERIAL_ECHOLNPAIR_P(port, "S1 Z", LINEAR_UNIT(endstops.z2_endstop_adj));
SERIAL_ECHOLNPAIR("S1 Z", LINEAR_UNIT(endstops.z2_endstop_adj));
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M666 S2 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
SERIAL_ECHOPAIR(" M666 S2 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
#elif ENABLED(Z_DUAL_ENDSTOPS)
SERIAL_ECHOPAIR_P(port, " Z", LINEAR_UNIT(endstops.z2_endstop_adj));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(endstops.z2_endstop_adj));
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
#endif // [XYZ]_DUAL_ENDSTOPS
@ -2732,10 +2694,10 @@ void MarlinSettings::reset(PORTARG_SOLO) {
CONFIG_ECHO_HEADING("Material heatup parameters:");
for (uint8_t i = 0; i < COUNT(ui.preheat_hotend_temp); i++) {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M145 S", (int)i);
SERIAL_ECHOPAIR_P(port, " H", TEMP_UNIT(ui.preheat_hotend_temp[i]));
SERIAL_ECHOPAIR_P(port, " B", TEMP_UNIT(ui.preheat_bed_temp[i]));
SERIAL_ECHOLNPAIR_P(port, " F", int(ui.preheat_fan_speed[i]));
SERIAL_ECHOPAIR(" M145 S", (int)i);
SERIAL_ECHOPAIR(" H", TEMP_UNIT(ui.preheat_hotend_temp[i]));
SERIAL_ECHOPAIR(" B", TEMP_UNIT(ui.preheat_bed_temp[i]));
SERIAL_ECHOLNPAIR(" F", int(ui.preheat_fan_speed[i]));
}
#endif
@ -2748,15 +2710,15 @@ void MarlinSettings::reset(PORTARG_SOLO) {
if (forReplay) {
HOTEND_LOOP() {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M301 E", e);
SERIAL_ECHOPAIR_P(port, " P", PID_PARAM(Kp, e));
SERIAL_ECHOPAIR_P(port, " I", unscalePID_i(PID_PARAM(Ki, e)));
SERIAL_ECHOPAIR_P(port, " D", unscalePID_d(PID_PARAM(Kd, e)));
SERIAL_ECHOPAIR(" M301 E", e);
SERIAL_ECHOPAIR(" P", PID_PARAM(Kp, e));
SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, e)));
SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, e)));
#if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPAIR_P(port, " C", PID_PARAM(Kc, e));
if (e == 0) SERIAL_ECHOPAIR_P(port, " L", thermalManager.lpq_len);
SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, e));
if (e == 0) SERIAL_ECHOPAIR(" L", thermalManager.lpq_len);
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
}
}
else
@ -2764,23 +2726,23 @@ void MarlinSettings::reset(PORTARG_SOLO) {
// !forReplay || HOTENDS == 1
{
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M301 P", PID_PARAM(Kp, 0)); // for compatibility with hosts, only echo values for E0
SERIAL_ECHOPAIR_P(port, " I", unscalePID_i(PID_PARAM(Ki, 0)));
SERIAL_ECHOPAIR_P(port, " D", unscalePID_d(PID_PARAM(Kd, 0)));
SERIAL_ECHOPAIR(" M301 P", PID_PARAM(Kp, 0)); // for compatibility with hosts, only echo values for E0
SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, 0)));
SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0)));
#if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPAIR_P(port, " C", PID_PARAM(Kc, 0));
SERIAL_ECHOPAIR_P(port, " L", thermalManager.lpq_len);
SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, 0));
SERIAL_ECHOPAIR(" L", thermalManager.lpq_len);
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
}
#endif // PIDTEMP
#if ENABLED(PIDTEMPBED)
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M304 P", thermalManager.bed_pid.Kp);
SERIAL_ECHOPAIR_P(port, " I", unscalePID_i(thermalManager.bed_pid.Ki));
SERIAL_ECHOPAIR_P(port, " D", unscalePID_d(thermalManager.bed_pid.Kd));
SERIAL_EOL_P(port);
SERIAL_ECHOPAIR(" M304 P", thermalManager.bed_pid.Kp);
SERIAL_ECHOPAIR(" I", unscalePID_i(thermalManager.bed_pid.Ki));
SERIAL_ECHOPAIR(" D", unscalePID_d(thermalManager.bed_pid.Kd));
SERIAL_EOL();
#endif
#endif // PIDTEMP || PIDTEMPBED
@ -2788,35 +2750,35 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#if HAS_LCD_CONTRAST
CONFIG_ECHO_HEADING("LCD Contrast:");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(port, " M250 C", ui.contrast);
SERIAL_ECHOLNPAIR(" M250 C", ui.contrast);
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
CONFIG_ECHO_HEADING("Power-Loss Recovery:");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(port, " M413 S", int(recovery.enabled));
SERIAL_ECHOLNPAIR(" M413 S", int(recovery.enabled));
#endif
#if ENABLED(FWRETRACT)
CONFIG_ECHO_HEADING("Retract: S<length> F<units/m> Z<lift>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M207 S", LINEAR_UNIT(fwretract.settings.retract_length));
SERIAL_ECHOPAIR_P(port, " W", LINEAR_UNIT(fwretract.settings.swap_retract_length));
SERIAL_ECHOPAIR_P(port, " F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_feedrate_mm_s)));
SERIAL_ECHOLNPAIR_P(port, " Z", LINEAR_UNIT(fwretract.settings.retract_zraise));
SERIAL_ECHOPAIR(" M207 S", LINEAR_UNIT(fwretract.settings.retract_length));
SERIAL_ECHOPAIR(" W", LINEAR_UNIT(fwretract.settings.swap_retract_length));
SERIAL_ECHOPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_feedrate_mm_s)));
SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(fwretract.settings.retract_zraise));
CONFIG_ECHO_HEADING("Recover: S<length> F<units/m>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M208 S", LINEAR_UNIT(fwretract.settings.retract_recover_length));
SERIAL_ECHOPAIR_P(port, " W", LINEAR_UNIT(fwretract.settings.swap_retract_recover_length));
SERIAL_ECHOLNPAIR_P(port, " F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_recover_feedrate_mm_s)));
SERIAL_ECHOPAIR(" M208 S", LINEAR_UNIT(fwretract.settings.retract_recover_length));
SERIAL_ECHOPAIR(" W", LINEAR_UNIT(fwretract.settings.swap_retract_recover_length));
SERIAL_ECHOLNPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_recover_feedrate_mm_s)));
#if ENABLED(FWRETRACT_AUTORETRACT)
CONFIG_ECHO_HEADING("Auto-Retract: S=0 to disable, 1 to interpret E-only moves as retract/recover");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(port, " M209 S", fwretract.autoretract_enabled ? 1 : 0);
SERIAL_ECHOLNPAIR(" M209 S", fwretract.autoretract_enabled ? 1 : 0);
#endif // FWRETRACT_AUTORETRACT
@ -2828,11 +2790,11 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#if HAS_BED_PROBE
if (!forReplay) {
CONFIG_ECHO_START();
SERIAL_ECHOPGM_P(port, "Z-Probe Offset");
SAY_UNITS_P(port, true);
SERIAL_ECHOPGM("Z-Probe Offset");
say_units(true);
}
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(port, " M851 Z", LINEAR_UNIT(zprobe_zoffset));
SERIAL_ECHOLNPAIR(" M851 Z", LINEAR_UNIT(zprobe_zoffset));
#endif
/**
@ -2842,11 +2804,11 @@ void MarlinSettings::reset(PORTARG_SOLO) {
CONFIG_ECHO_HEADING("Skew Factor: ");
CONFIG_ECHO_START();
#if ENABLED(SKEW_CORRECTION_FOR_Z)
SERIAL_ECHOPAIR_F_P(port, " M852 I", LINEAR_UNIT(planner.skew_factor.xy), 6);
SERIAL_ECHOPAIR_F_P(port, " J", LINEAR_UNIT(planner.skew_factor.xz), 6);
SERIAL_ECHOLNPAIR_F_P(port, " K", LINEAR_UNIT(planner.skew_factor.yz), 6);
SERIAL_ECHOPAIR_F(" M852 I", LINEAR_UNIT(planner.skew_factor.xy), 6);
SERIAL_ECHOPAIR_F(" J", LINEAR_UNIT(planner.skew_factor.xz), 6);
SERIAL_ECHOLNPAIR_F(" K", LINEAR_UNIT(planner.skew_factor.yz), 6);
#else
SERIAL_ECHOLNPAIR_F_P(port, " M852 S", LINEAR_UNIT(planner.skew_factor.xy), 6);
SERIAL_ECHOLNPAIR_F(" M852 S", LINEAR_UNIT(planner.skew_factor.xy), 6);
#endif
#endif
@ -2858,68 +2820,68 @@ void MarlinSettings::reset(PORTARG_SOLO) {
CONFIG_ECHO_HEADING("Stepper driver current:");
CONFIG_ECHO_START();
#if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
say_M906(PORTVAR_SOLO);
say_M906();
#endif
#if AXIS_IS_TMC(X)
SERIAL_ECHOPAIR_P(port, " X", stepperX.getMilliamps());
SERIAL_ECHOPAIR(" X", stepperX.getMilliamps());
#endif
#if AXIS_IS_TMC(Y)
SERIAL_ECHOPAIR_P(port, " Y", stepperY.getMilliamps());
SERIAL_ECHOPAIR(" Y", stepperY.getMilliamps());
#endif
#if AXIS_IS_TMC(Z)
SERIAL_ECHOPAIR_P(port, " Z", stepperZ.getMilliamps());
SERIAL_ECHOPAIR(" Z", stepperZ.getMilliamps());
#endif
#if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
SERIAL_EOL_P(port);
SERIAL_EOL();
#endif
#if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
say_M906(PORTVAR_SOLO);
SERIAL_ECHOPGM_P(port, " I1");
say_M906();
SERIAL_ECHOPGM(" I1");
#endif
#if AXIS_IS_TMC(X2)
SERIAL_ECHOPAIR_P(port, " X", stepperX2.getMilliamps());
SERIAL_ECHOPAIR(" X", stepperX2.getMilliamps());
#endif
#if AXIS_IS_TMC(Y2)
SERIAL_ECHOPAIR_P(port, " Y", stepperY2.getMilliamps());
SERIAL_ECHOPAIR(" Y", stepperY2.getMilliamps());
#endif
#if AXIS_IS_TMC(Z2)
SERIAL_ECHOPAIR_P(port, " Z", stepperZ2.getMilliamps());
SERIAL_ECHOPAIR(" Z", stepperZ2.getMilliamps());
#endif
#if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
SERIAL_EOL_P(port);
SERIAL_EOL();
#endif
#if AXIS_IS_TMC(Z3)
say_M906(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " I2 Z", stepperZ3.getMilliamps());
say_M906();
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.getMilliamps());
#endif
#if AXIS_IS_TMC(E0)
say_M906(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T0 E", stepperE0.getMilliamps());
say_M906();
SERIAL_ECHOLNPAIR(" T0 E", stepperE0.getMilliamps());
#endif
#if AXIS_IS_TMC(E1)
say_M906(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T1 E", stepperE1.getMilliamps());
say_M906();
SERIAL_ECHOLNPAIR(" T1 E", stepperE1.getMilliamps());
#endif
#if AXIS_IS_TMC(E2)
say_M906(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T2 E", stepperE2.getMilliamps());
say_M906();
SERIAL_ECHOLNPAIR(" T2 E", stepperE2.getMilliamps());
#endif
#if AXIS_IS_TMC(E3)
say_M906(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T3 E", stepperE3.getMilliamps());
say_M906();
SERIAL_ECHOLNPAIR(" T3 E", stepperE3.getMilliamps());
#endif
#if AXIS_IS_TMC(E4)
say_M906(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T4 E", stepperE4.getMilliamps());
say_M906();
SERIAL_ECHOLNPAIR(" T4 E", stepperE4.getMilliamps());
#endif
#if AXIS_IS_TMC(E5)
say_M906(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T5 E", stepperE5.getMilliamps());
say_M906();
SERIAL_ECHOLNPAIR(" T5 E", stepperE5.getMilliamps());
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
/**
* TMC Hybrid Threshold
@ -2928,69 +2890,69 @@ void MarlinSettings::reset(PORTARG_SOLO) {
CONFIG_ECHO_HEADING("Hybrid Threshold:");
CONFIG_ECHO_START();
#if AXIS_HAS_STEALTHCHOP(X) || AXIS_HAS_STEALTHCHOP(Y) || AXIS_HAS_STEALTHCHOP(Z)
say_M913(PORTVAR_SOLO);
say_M913();
#endif
#if AXIS_HAS_STEALTHCHOP(X)
SERIAL_ECHOPAIR_P(port, " X", TMC_GET_PWMTHRS(X, X));
SERIAL_ECHOPAIR(" X", TMC_GET_PWMTHRS(X, X));
#endif
#if AXIS_HAS_STEALTHCHOP(Y)
SERIAL_ECHOPAIR_P(port, " Y", TMC_GET_PWMTHRS(Y, Y));
SERIAL_ECHOPAIR(" Y", TMC_GET_PWMTHRS(Y, Y));
#endif
#if AXIS_HAS_STEALTHCHOP(Z)
SERIAL_ECHOPAIR_P(port, " Z", TMC_GET_PWMTHRS(Z, Z));
SERIAL_ECHOPAIR(" Z", TMC_GET_PWMTHRS(Z, Z));
#endif
#if AXIS_HAS_STEALTHCHOP(X) || AXIS_HAS_STEALTHCHOP(Y) || AXIS_HAS_STEALTHCHOP(Z)
SERIAL_EOL_P(port);
SERIAL_EOL();
#endif
#if AXIS_HAS_STEALTHCHOP(X2) || AXIS_HAS_STEALTHCHOP(Y2) || AXIS_HAS_STEALTHCHOP(Z2)
say_M913(PORTVAR_SOLO);
SERIAL_ECHOPGM_P(port, " I1");
say_M913();
SERIAL_ECHOPGM(" I1");
#endif
#if AXIS_HAS_STEALTHCHOP(X2)
SERIAL_ECHOPAIR_P(port, " X", TMC_GET_PWMTHRS(X, X2));
SERIAL_ECHOPAIR(" X", TMC_GET_PWMTHRS(X, X2));
#endif
#if AXIS_HAS_STEALTHCHOP(Y2)
SERIAL_ECHOPAIR_P(port, " Y", TMC_GET_PWMTHRS(Y, Y2));
SERIAL_ECHOPAIR(" Y", TMC_GET_PWMTHRS(Y, Y2));
#endif
#if AXIS_HAS_STEALTHCHOP(Z2)
SERIAL_ECHOPAIR_P(port, " Z", TMC_GET_PWMTHRS(Z, Z2));
SERIAL_ECHOPAIR(" Z", TMC_GET_PWMTHRS(Z, Z2));
#endif
#if AXIS_HAS_STEALTHCHOP(X2) || AXIS_HAS_STEALTHCHOP(Y2) || AXIS_HAS_STEALTHCHOP(Z2)
SERIAL_EOL_P(port);
SERIAL_EOL();
#endif
#if AXIS_HAS_STEALTHCHOP(Z3)
say_M913(PORTVAR_SOLO);
SERIAL_ECHOPGM_P(port, " I2");
SERIAL_ECHOLNPAIR_P(port, " Z", TMC_GET_PWMTHRS(Z, Z3));
say_M913();
SERIAL_ECHOPGM(" I2");
SERIAL_ECHOLNPAIR(" Z", TMC_GET_PWMTHRS(Z, Z3));
#endif
#if AXIS_HAS_STEALTHCHOP(E0)
say_M913(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T0 E", TMC_GET_PWMTHRS(E, E0));
say_M913();
SERIAL_ECHOLNPAIR(" T0 E", TMC_GET_PWMTHRS(E, E0));
#endif
#if AXIS_HAS_STEALTHCHOP(E1)
say_M913(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T1 E", TMC_GET_PWMTHRS(E, E1));
say_M913();
SERIAL_ECHOLNPAIR(" T1 E", TMC_GET_PWMTHRS(E, E1));
#endif
#if AXIS_HAS_STEALTHCHOP(E2)
say_M913(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T2 E", TMC_GET_PWMTHRS(E, E2));
say_M913();
SERIAL_ECHOLNPAIR(" T2 E", TMC_GET_PWMTHRS(E, E2));
#endif
#if AXIS_HAS_STEALTHCHOP(E3)
say_M913(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T3 E", TMC_GET_PWMTHRS(E, E3));
say_M913();
SERIAL_ECHOLNPAIR(" T3 E", TMC_GET_PWMTHRS(E, E3));
#endif
#if AXIS_HAS_STEALTHCHOP(E4)
say_M913(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T4 E", TMC_GET_PWMTHRS(E, E4));
say_M913();
SERIAL_ECHOLNPAIR(" T4 E", TMC_GET_PWMTHRS(E, E4));
#endif
#if AXIS_HAS_STEALTHCHOP(E5)
say_M913(PORTVAR_SOLO);
SERIAL_ECHOLNPAIR_P(port, " T5 E", TMC_GET_PWMTHRS(E, E5));
say_M913();
SERIAL_ECHOLNPAIR(" T5 E", TMC_GET_PWMTHRS(E, E5));
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
#endif // HYBRID_THRESHOLD
/**
@ -3000,17 +2962,17 @@ void MarlinSettings::reset(PORTARG_SOLO) {
CONFIG_ECHO_HEADING("TMC2130 StallGuard threshold:");
CONFIG_ECHO_START();
#if X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS
say_M914(PORTVAR_SOLO);
say_M914();
#if X_SENSORLESS
SERIAL_ECHOPAIR_P(port, " X", stepperX.sgt());
SERIAL_ECHOPAIR(" X", stepperX.sgt());
#endif
#if Y_SENSORLESS
SERIAL_ECHOPAIR_P(port, " Y", stepperY.sgt());
SERIAL_ECHOPAIR(" Y", stepperY.sgt());
#endif
#if Z_SENSORLESS
SERIAL_ECHOPAIR_P(port, " Z", stepperZ.sgt());
SERIAL_ECHOPAIR(" Z", stepperZ.sgt());
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
#endif
#define HAS_X2_SENSORLESS (defined(X_STALL_SENSITIVITY) && AXIS_HAS_STALLGUARD(X2))
@ -3018,24 +2980,24 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#define HAS_Z2_SENSORLESS (defined(Z_STALL_SENSITIVITY) && AXIS_HAS_STALLGUARD(Z2))
#define HAS_Z3_SENSORLESS (defined(Z_STALL_SENSITIVITY) && AXIS_HAS_STALLGUARD(Z3))
#if HAS_X2_SENSORLESS || HAS_Y2_SENSORLESS || HAS_Z2_SENSORLESS
say_M914(PORTVAR_SOLO);
SERIAL_ECHOPGM_P(port, " I1");
say_M914();
SERIAL_ECHOPGM(" I1");
#if HAS_X2_SENSORLESS
SERIAL_ECHOPAIR_P(port, " X", stepperX2.sgt());
SERIAL_ECHOPAIR(" X", stepperX2.sgt());
#endif
#if HAS_Y2_SENSORLESS
SERIAL_ECHOPAIR_P(port, " Y", stepperY2.sgt());
SERIAL_ECHOPAIR(" Y", stepperY2.sgt());
#endif
#if HAS_Z2_SENSORLESS
SERIAL_ECHOPAIR_P(port, " Z", stepperZ2.sgt());
SERIAL_ECHOPAIR(" Z", stepperZ2.sgt());
#endif
SERIAL_EOL_P(port);
SERIAL_EOL();
#endif
#if HAS_Z3_SENSORLESS
say_M914(PORTVAR_SOLO);
SERIAL_ECHOPGM_P(port, " I2");
SERIAL_ECHOLNPAIR_P(port, " Z", stepperZ3.sgt());
say_M914();
SERIAL_ECHOPGM(" I2");
SERIAL_ECHOLNPAIR(" Z", stepperZ3.sgt());
#endif
#endif // USE_SENSORLESS
@ -3062,11 +3024,11 @@ void MarlinSettings::reset(PORTARG_SOLO) {
constexpr bool chop_z = false;
#endif
if (chop_x || chop_y || chop_z) say_M569(PORTVAR_SOLO);
if (chop_x) SERIAL_ECHOPGM_P(port, " X");
if (chop_y) SERIAL_ECHOPGM_P(port, " Y");
if (chop_z) SERIAL_ECHOPGM_P(port, " Z");
if (chop_x || chop_y || chop_z) SERIAL_EOL_P(port);
if (chop_x || chop_y || chop_z) say_M569();
if (chop_x) SERIAL_ECHOPGM(" X");
if (chop_y) SERIAL_ECHOPGM(" Y");
if (chop_z) SERIAL_ECHOPGM(" Z");
if (chop_x || chop_y || chop_z) SERIAL_EOL();
#if AXIS_HAS_STEALTHCHOP(X2)
const bool chop_x2 = stepperX2.get_stealthChop_status();
@ -3084,33 +3046,33 @@ void MarlinSettings::reset(PORTARG_SOLO) {
constexpr bool chop_z2 = false;
#endif
if (chop_x2 || chop_y2 || chop_z2) say_M569(PORTVAR_BEFORE PSTR("I1"));
if (chop_x2) SERIAL_ECHOPGM_P(port, " X");
if (chop_y2) SERIAL_ECHOPGM_P(port, " Y");
if (chop_z2) SERIAL_ECHOPGM_P(port, " Z");
if (chop_x2 || chop_y2 || chop_z2) SERIAL_EOL_P(port);
if (chop_x2 || chop_y2 || chop_z2) say_M569(PSTR("I1"));
if (chop_x2) SERIAL_ECHOPGM(" X");
if (chop_y2) SERIAL_ECHOPGM(" Y");
if (chop_z2) SERIAL_ECHOPGM(" Z");
if (chop_x2 || chop_y2 || chop_z2) SERIAL_EOL();
#if AXIS_HAS_STEALTHCHOP(Z3)
if (stepperZ3.get_stealthChop_status()) { say_M569(PORTVAR_BEFORE PSTR("I2 Z")); }
if (stepperZ3.get_stealthChop_status()) { say_M569(PSTR("I2 Z")); }
#endif
#if AXIS_HAS_STEALTHCHOP(E0)
if (stepperE0.get_stealthChop_status()) { say_M569(PORTVAR_BEFORE PSTR("T0 E")); }
if (stepperE0.get_stealthChop_status()) { say_M569(PSTR("T0 E")); }
#endif
#if AXIS_HAS_STEALTHCHOP(E1)
if (stepperE1.get_stealthChop_status()) { say_M569(PORTVAR_BEFORE PSTR("T1 E")); }
if (stepperE1.get_stealthChop_status()) { say_M569(PSTR("T1 E")); }
#endif
#if AXIS_HAS_STEALTHCHOP(E2)
if (stepperE2.get_stealthChop_status()) { say_M569(PORTVAR_BEFORE PSTR("T2 E")); }
if (stepperE2.get_stealthChop_status()) { say_M569(PSTR("T2 E")); }
#endif
#if AXIS_HAS_STEALTHCHOP(E3)
if (stepperE3.get_stealthChop_status()) { say_M569(PORTVAR_BEFORE PSTR("T3 E")); }
if (stepperE3.get_stealthChop_status()) { say_M569(PSTR("T3 E")); }
#endif
#if AXIS_HAS_STEALTHCHOP(E4)
if (stepperE4.get_stealthChop_status()) { say_M569(PORTVAR_BEFORE PSTR("T4 E")); }
if (stepperE4.get_stealthChop_status()) { say_M569(PSTR("T4 E")); }
#endif
#if AXIS_HAS_STEALTHCHOP(E5)
if (stepperE5.get_stealthChop_status()) { say_M569(PORTVAR_BEFORE PSTR("T5 E")); }
if (stepperE5.get_stealthChop_status()) { say_M569(PSTR("T5 E")); }
#endif
#endif // HAS_STEALTHCHOP
@ -3124,11 +3086,11 @@ void MarlinSettings::reset(PORTARG_SOLO) {
CONFIG_ECHO_HEADING("Linear Advance:");
CONFIG_ECHO_START();
#if EXTRUDERS < 2
SERIAL_ECHOLNPAIR_P(port, " M900 K", planner.extruder_advance_K[0]);
SERIAL_ECHOLNPAIR(" M900 K", planner.extruder_advance_K[0]);
#else
LOOP_L_N(i, EXTRUDERS) {
SERIAL_ECHOPAIR_P(port, " M900 T", int(i));
SERIAL_ECHOLNPAIR_P(port, " K", planner.extruder_advance_K[i]);
SERIAL_ECHOPAIR(" M900 T", int(i));
SERIAL_ECHOLNPAIR(" K", planner.extruder_advance_K[i]);
}
#endif
#endif
@ -3136,10 +3098,10 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#if HAS_MOTOR_CURRENT_PWM
CONFIG_ECHO_HEADING("Stepper motor currents:");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(port, " M907 X", stepper.motor_current_setting[0]);
SERIAL_ECHOPAIR_P(port, " Z", stepper.motor_current_setting[1]);
SERIAL_ECHOPAIR_P(port, " E", stepper.motor_current_setting[2]);
SERIAL_EOL_P(port);
SERIAL_ECHOPAIR(" M907 X", stepper.motor_current_setting[0]);
SERIAL_ECHOPAIR(" Z", stepper.motor_current_setting[1]);
SERIAL_ECHOPAIR(" E", stepper.motor_current_setting[2]);
SERIAL_EOL();
#endif
/**
@ -3149,37 +3111,37 @@ void MarlinSettings::reset(PORTARG_SOLO) {
CONFIG_ECHO_HEADING("Filament load/unload lengths:");
CONFIG_ECHO_START();
#if EXTRUDERS == 1
say_M603(PORTVAR_SOLO);
SERIAL_ECHOPAIR_P(port, "L", LINEAR_UNIT(fc_settings[0].load_length));
SERIAL_ECHOLNPAIR_P(port, " U", LINEAR_UNIT(fc_settings[0].unload_length));
say_M603();
SERIAL_ECHOPAIR("L", LINEAR_UNIT(fc_settings[0].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[0].unload_length));
#else
say_M603(PORTVAR_SOLO);
SERIAL_ECHOPAIR_P(port, "T0 L", LINEAR_UNIT(fc_settings[0].load_length));
SERIAL_ECHOLNPAIR_P(port, " U", LINEAR_UNIT(fc_settings[0].unload_length));
say_M603();
SERIAL_ECHOPAIR("T0 L", LINEAR_UNIT(fc_settings[0].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[0].unload_length));
CONFIG_ECHO_START();
say_M603(PORTVAR_SOLO);
SERIAL_ECHOPAIR_P(port, "T1 L", LINEAR_UNIT(fc_settings[1].load_length));
SERIAL_ECHOLNPAIR_P(port, " U", LINEAR_UNIT(fc_settings[1].unload_length));
say_M603();
SERIAL_ECHOPAIR("T1 L", LINEAR_UNIT(fc_settings[1].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[1].unload_length));
#if EXTRUDERS > 2
CONFIG_ECHO_START();
say_M603(PORTVAR_SOLO);
SERIAL_ECHOPAIR_P(port, "T2 L", LINEAR_UNIT(fc_settings[2].load_length));
SERIAL_ECHOLNPAIR_P(port, " U", LINEAR_UNIT(fc_settings[2].unload_length));
say_M603();
SERIAL_ECHOPAIR("T2 L", LINEAR_UNIT(fc_settings[2].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[2].unload_length));
#if EXTRUDERS > 3
CONFIG_ECHO_START();
say_M603(PORTVAR_SOLO);
SERIAL_ECHOPAIR_P(port, "T3 L", LINEAR_UNIT(fc_settings[3].load_length));
SERIAL_ECHOLNPAIR_P(port, " U", LINEAR_UNIT(fc_settings[3].unload_length));
say_M603();
SERIAL_ECHOPAIR("T3 L", LINEAR_UNIT(fc_settings[3].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[3].unload_length));
#if EXTRUDERS > 4
CONFIG_ECHO_START();
say_M603(PORTVAR_SOLO);
SERIAL_ECHOPAIR_P(port, "T4 L", LINEAR_UNIT(fc_settings[4].load_length));
SERIAL_ECHOLNPAIR_P(port, " U", LINEAR_UNIT(fc_settings[4].unload_length));
say_M603();
SERIAL_ECHOPAIR("T4 L", LINEAR_UNIT(fc_settings[4].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[4].unload_length));
#if EXTRUDERS > 5
CONFIG_ECHO_START();
say_M603(PORTVAR_SOLO);
SERIAL_ECHOPAIR_P(port, "T5 L", LINEAR_UNIT(fc_settings[5].load_length));
SERIAL_ECHOLNPAIR_P(port, " U", LINEAR_UNIT(fc_settings[5].unload_length));
say_M603();
SERIAL_ECHOPAIR("T5 L", LINEAR_UNIT(fc_settings[5].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[5].unload_length));
#endif // EXTRUDERS > 5
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3

31
Marlin/src/module/configuration_store.h
View file

@ -27,24 +27,14 @@
#include "../HAL/shared/persistent_store_api.h"
#endif
#define ADD_PORT_ARG ENABLED(EEPROM_CHITCHAT) && NUM_SERIAL > 1
#if ADD_PORT_ARG
#define PORTINIT_SOLO const int8_t port=-1
#define PORTINIT_AFTER ,const int8_t port=-1
#else
#define PORTINIT_SOLO
#define PORTINIT_AFTER
#endif
class MarlinSettings {
public:
MarlinSettings() { }
static uint16_t datasize();
static void reset(PORTINIT_SOLO);
static bool save(PORTINIT_SOLO); // Return 'true' if data was saved
static void reset();
static bool save(); // Return 'true' if data was saved
FORCE_INLINE static bool init_eeprom() {
reset();
@ -65,8 +55,8 @@ class MarlinSettings {
#endif
#if ENABLED(EEPROM_SETTINGS)
static bool load(PORTINIT_SOLO); // Return 'true' if data was loaded ok
static bool validate(PORTINIT_SOLO); // Return 'true' if EEPROM data is ok
static bool load(); // Return 'true' if data was loaded ok
static bool validate(); // Return 'true' if EEPROM data is ok
#if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system
// That can store is enabled
@ -86,11 +76,7 @@ class MarlinSettings {
#endif
#if DISABLED(DISABLE_M503)
static void report(const bool forReplay=false
#if NUM_SERIAL > 1
, const int8_t port=-1
#endif
);
static void report(const bool forReplay=false);
#else
FORCE_INLINE
static void report(const bool forReplay=false) { UNUSED(forReplay); }
@ -109,12 +95,9 @@ class MarlinSettings {
// live at the very end of the eeprom
#endif
static bool _load(PORTINIT_SOLO);
static bool size_error(const uint16_t size PORTINIT_AFTER);
static bool _load();
static bool size_error(const uint16_t size);
#endif
};
extern MarlinSettings settings;
#undef PORTINIT_SOLO
#undef PORTINIT_AFTER

39
Marlin/src/module/temperature.cpp
View file

@ -2500,17 +2500,14 @@ void Temperature::isr() {
#if ENABLED(SHOW_TEMP_ADC_VALUES)
, const float r
#endif
#if NUM_SERIAL > 1
, const int8_t port=-1
#endif
, const int8_t e=-3
) {
#if !(HAS_HEATED_BED && HAS_TEMP_HOTEND && HAS_TEMP_CHAMBER) && HOTENDS <= 1
UNUSED(e);
#endif
SERIAL_CHAR_P(port, ' ');
SERIAL_CHAR_P(port,
SERIAL_CHAR(' ');
SERIAL_CHAR(
#if HAS_TEMP_CHAMBER && HAS_HEATED_BED && HAS_TEMP_HOTEND
e == -2 ? 'C' : e == -1 ? 'B' : 'T'
#elif HAS_HEATED_BED && HAS_TEMP_HOTEND
@ -2522,23 +2519,19 @@ void Temperature::isr() {
#endif
);
#if HOTENDS > 1
if (e >= 0) SERIAL_CHAR_P(port, '0' + e);
if (e >= 0) SERIAL_CHAR('0' + e);
#endif
SERIAL_CHAR_P(port, ':');
SERIAL_ECHO_P(port, c);
SERIAL_ECHOPAIR_P(port, " /" , t);
SERIAL_CHAR(':');
SERIAL_ECHO(c);
SERIAL_ECHOPAIR(" /" , t);
#if ENABLED(SHOW_TEMP_ADC_VALUES)
SERIAL_ECHOPAIR_P(port, " (", r / OVERSAMPLENR);
SERIAL_CHAR_P(port, ')');
SERIAL_ECHOPAIR(" (", r / OVERSAMPLENR);
SERIAL_CHAR(')');
#endif
delay(2);
}
void Temperature::print_heater_states(const uint8_t target_extruder
#if NUM_SERIAL > 1
, const int8_t port
#endif
) {
void Temperature::print_heater_states(const uint8_t target_extruder) {
#if HAS_TEMP_HOTEND
print_heater_state(degHotend(target_extruder), degTargetHotend(target_extruder)
#if ENABLED(SHOW_TEMP_ADC_VALUES)
@ -2579,17 +2572,17 @@ void Temperature::isr() {
, e
);
#endif
SERIAL_ECHOPGM_P(port, " @:");
SERIAL_ECHO_P(port, getHeaterPower(target_extruder));
SERIAL_ECHOPGM(" @:");
SERIAL_ECHO(getHeaterPower(target_extruder));
#if HAS_HEATED_BED
SERIAL_ECHOPGM_P(port, " B@:");
SERIAL_ECHO_P(port, getHeaterPower(-1));
SERIAL_ECHOPGM(" B@:");
SERIAL_ECHO(getHeaterPower(-1));
#endif
#if HOTENDS > 1
HOTEND_LOOP() {
SERIAL_ECHOPAIR_P(port, " @", e);
SERIAL_CHAR_P(port, ':');
SERIAL_ECHO_P(port, getHeaterPower(e));
SERIAL_ECHOPAIR(" @", e);
SERIAL_CHAR(':');
SERIAL_ECHO(getHeaterPower(e));
}
#endif
}

6
Marlin/src/module/temperature.h
View file

@ -672,11 +672,7 @@ class Temperature {
#endif // HEATER_IDLE_HANDLER
#if HAS_TEMP_SENSOR
static void print_heater_states(const uint8_t target_extruder
#if NUM_SERIAL > 1
, const int8_t port = -1
#endif
);
static void print_heater_states(const uint8_t target_extruder);
#if ENABLED(AUTO_REPORT_TEMPERATURES)
static uint8_t auto_report_temp_interval;
static millis_t next_temp_report_ms;

117
Marlin/src/sd/cardreader.cpp
View file

@ -51,10 +51,8 @@ card_flags_t CardReader::flag;
char CardReader::filename[FILENAME_LENGTH], CardReader::longFilename[LONG_FILENAME_LENGTH];
int8_t CardReader::autostart_index;
#if ENABLED(FAST_FILE_TRANSFER)
#if NUM_SERIAL > 1
uint8_t CardReader::transfer_port;
#endif
#if ENABLED(FAST_FILE_TRANSFER) && NUM_SERIAL > 1
int8_t CardReader::transfer_port;
#endif
// private:
@ -160,11 +158,7 @@ char *createFilename(char *buffer, const dir_t &p) {
uint16_t nrFile_index;
void CardReader::lsDive(const char *prepend, SdFile parent, const char * const match/*=NULL*/
#if NUM_SERIAL > 1
, const int8_t port/*= -1*/
#endif
) {
void CardReader::lsDive(const char *prepend, SdFile parent, const char * const match/*=NULL*/) {
dir_t p;
uint8_t cnt = 0;
@ -197,16 +191,12 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
SdFile dir;
if (!dir.open(&parent, dosFilename, O_READ)) {
if (lsAction == LS_SerialPrint) {
SERIAL_ECHO_START_P(port);
SERIAL_ECHOPGM_P(port, MSG_SD_CANT_OPEN_SUBDIR);
SERIAL_ECHOLN_P(port, dosFilename);
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_SD_CANT_OPEN_SUBDIR);
SERIAL_ECHOLN(dosFilename);
}
}
lsDive(path, dir
#if NUM_SERIAL > 1
, NULL, port
#endif
);
lsDive(path, dir);
// close() is done automatically by destructor of SdFile
}
else {
@ -228,10 +218,10 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
case LS_SerialPrint:
createFilename(filename, p);
if (prepend) SERIAL_ECHO_P(port, prepend);
SERIAL_ECHO_P(port, filename);
SERIAL_CHAR_P(port, ' ');
SERIAL_ECHOLN_P(port, p.fileSize);
if (prepend) SERIAL_ECHO(prepend);
SERIAL_ECHO(filename);
SERIAL_CHAR(' ');
SERIAL_ECHOLN(p.fileSize);
break;
case LS_GetFilename:
@ -248,18 +238,10 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
} // while readDir
}
void CardReader::ls(
#if NUM_SERIAL > 1
const int8_t port
#endif
) {
void CardReader::ls() {
lsAction = LS_SerialPrint;
root.rewind();
lsDive(NULL, root
#if NUM_SERIAL > 1
, NULL, port
#endif
);
lsDive(NULL, root);
}
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
@ -267,16 +249,12 @@ void CardReader::ls(
/**
* Get a long pretty path based on a DOS 8.3 path
*/
void CardReader::printLongPath(char *path
#if NUM_SERIAL > 1
, const int8_t port/*= -1*/
#endif
) {
void CardReader::printLongPath(char *path) {
lsAction = LS_GetFilename;
int i, pathLen = strlen(path);
// SERIAL_ECHOPGM_P(port, "Full Path: "); SERIAL_ECHOLN_P(port, path);
// SERIAL_ECHOPGM("Full Path: "); SERIAL_ECHOLN(path);
// Zero out slashes to make segments
for (i = 0; i < pathLen; i++) if (path[i] == '/') path[i] = '\0';
@ -294,32 +272,28 @@ void CardReader::ls(
// Go to the next segment
while (path[++i]) { }
// SERIAL_ECHOPGM_P(port, "Looking for segment: "); SERIAL_ECHOLN_P(port, segment);
// SERIAL_ECHOPGM("Looking for segment: "); SERIAL_ECHOLN(segment);
// Find the item, setting the long filename
diveDir.rewind();
lsDive(NULL, diveDir, segment
#if NUM_SERIAL > 1
, port
#endif
);
lsDive(NULL, diveDir, segment);
// Print /LongNamePart to serial output
SERIAL_CHAR_P(port, '/');
SERIAL_ECHO_P(port, longFilename[0] ? longFilename : "???");
SERIAL_CHAR('/');
SERIAL_ECHO(longFilename[0] ? longFilename : "???");
// If the filename was printed then that's it
if (!flag.filenameIsDir) break;
// SERIAL_ECHOPGM_P(port, "Opening dir: "); SERIAL_ECHOLN_P(port, segment);
// SERIAL_ECHOPGM("Opening dir: "); SERIAL_ECHOLN(segment);
// Open the sub-item as the new dive parent
SdFile dir;
if (!dir.open(&diveDir, segment, O_READ)) {
SERIAL_EOL_P(port);
SERIAL_ECHO_START_P(port);
SERIAL_ECHOPGM_P(port, MSG_SD_CANT_OPEN_SUBDIR);
SERIAL_ECHO_P(port, segment);
SERIAL_EOL();
SERIAL_ECHO_START();
SERIAL_ECHOPGM(MSG_SD_CANT_OPEN_SUBDIR);
SERIAL_ECHO(segment);
break;
}
@ -328,7 +302,7 @@ void CardReader::ls(
} // while i<pathLen
SERIAL_EOL_P(port);
SERIAL_EOL();
}
#endif // LONG_FILENAME_HOST_SUPPORT
@ -336,27 +310,23 @@ void CardReader::ls(
/**
* Echo the DOS 8.3 filename (and long filename, if any)
*/
void CardReader::printFilename(
#if NUM_SERIAL > 1
const int8_t port/*= -1*/
#endif
) {
void CardReader::printFilename() {
if (file.isOpen()) {
char dosFilename[FILENAME_LENGTH];
file.getFilename(dosFilename);
SERIAL_ECHO_P(port, dosFilename);
SERIAL_ECHO(dosFilename);
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
getfilename(0, dosFilename);
if (longFilename[0]) {
SERIAL_ECHO_P(port, ' ');
SERIAL_ECHO_P(port, longFilename);
SERIAL_ECHO(' ');
SERIAL_ECHO(longFilename);
}
#endif
}
else
SERIAL_ECHOPGM_P(port, "(no file)");
SERIAL_ECHOPGM("(no file)");
SERIAL_EOL_P(port);
SERIAL_EOL();
}
void CardReader::initsd() {
@ -556,19 +526,15 @@ void CardReader::removeFile(const char * const name) {
}
}
void CardReader::report_status(
#if NUM_SERIAL > 1
const int8_t port/*= -1*/
#endif
) {
void CardReader::report_status() {
if (isPrinting()) {
SERIAL_ECHOPGM_P(port, MSG_SD_PRINTING_BYTE);
SERIAL_ECHO_P(port, sdpos);
SERIAL_CHAR_P(port, '/');
SERIAL_ECHOLN_P(port, filesize);
SERIAL_ECHOPGM(MSG_SD_PRINTING_BYTE);
SERIAL_ECHO(sdpos);
SERIAL_CHAR('/');
SERIAL_ECHOLN(filesize);
}
else
SERIAL_ECHOLNPGM_P(port, MSG_SD_NOT_PRINTING);
SERIAL_ECHOLNPGM(MSG_SD_NOT_PRINTING);
}
void CardReader::write_command(char *buf) {
@ -1038,18 +1004,15 @@ void CardReader::printingHasFinished() {
uint8_t CardReader::auto_report_sd_interval = 0;
millis_t CardReader::next_sd_report_ms;
#if NUM_SERIAL > 1
int8_t CardReader::serialport;
int8_t CardReader::auto_report_port;
#endif
void CardReader::auto_report_sd_status() {
millis_t current_ms = millis();
if (auto_report_sd_interval && ELAPSED(current_ms, next_sd_report_ms)) {
next_sd_report_ms = current_ms + 1000UL * auto_report_sd_interval;
report_status(
#if NUM_SERIAL > 1
serialport
#endif
);
PORT_REDIRECT(auto_report_port);
report_status();
}
}
#endif // AUTO_REPORT_SD_STATUS

44
Marlin/src/sd/cardreader.h
View file

@ -70,24 +70,12 @@ public:
const bool re_sort=false
#endif
);
static void report_status(
#if NUM_SERIAL > 1
const int8_t port = -1
#endif
);
static void report_status();
static void printingHasFinished();
static void printFilename(
#if NUM_SERIAL > 1
const int8_t port = -1
#endif
);
static void printFilename();
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
static void printLongPath(char *path
#if NUM_SERIAL > 1
, const int8_t port = -1
#endif
);
static void printLongPath(char *path);
#endif
static void getfilename(uint16_t nr, const char* const match=NULL);
@ -95,11 +83,7 @@ public:
static void getAbsFilename(char *t);
static void ls(
#if NUM_SERIAL > 1
const int8_t port = -1
#endif
);
static void ls();
static void chdir(const char *relpath);
static int8_t updir();
static void setroot();
@ -144,13 +128,9 @@ public:
#if ENABLED(AUTO_REPORT_SD_STATUS)
static void auto_report_sd_status(void);
static inline void set_auto_report_interval(uint8_t v
static inline void set_auto_report_interval(const uint8_t v) {
#if NUM_SERIAL > 1
, int8_t port
#endif
) {
#if NUM_SERIAL > 1
serialport = port;
auto_report_port = serial_port_index;
#endif
NOMORE(v, 60);
auto_report_sd_interval = v;
@ -167,9 +147,9 @@ public:
#if ENABLED(FAST_FILE_TRANSFER)
#if NUM_SERIAL > 1
static uint8_t transfer_port;
static int8_t transfer_port;
#else
static constexpr uint8_t transfer_port = 0;
static constexpr int8_t transfer_port = SERIAL_PORT;
#endif
#endif
@ -244,11 +224,7 @@ private:
static LsAction lsAction; //stored for recursion.
static uint16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory.
static char *diveDirName;
static void lsDive(const char *prepend, SdFile parent, const char * const match=NULL
#if NUM_SERIAL > 1
, const int8_t port = -1
#endif
);
static void lsDive(const char *prepend, SdFile parent, const char * const match=NULL);
#if ENABLED(SDCARD_SORT_ALPHA)
static void flush_presort();
@ -258,7 +234,7 @@ private:
static uint8_t auto_report_sd_interval;
static millis_t next_sd_report_ms;
#if NUM_SERIAL > 1
static int8_t serialport;
static int8_t auto_report_port;
#endif
#endif
};