Add support for M575 (#14757)

This commit is contained in:
rafaljot 2019-07-30 08:30:00 +01:00 committed by Scott Lahteine
parent f8aa52346f
commit e44fccf3d2
113 changed files with 395 additions and 13 deletions

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -83,8 +83,9 @@ public:
HalSerial() { host_connected = true; } HalSerial() { host_connected = true; }
void begin(int32_t baud) { void begin(int32_t baud) { }
}
void end() { }
int peek() { int peek() {
uint8_t value; uint8_t value;

View file

@ -49,6 +49,8 @@ public:
{ {
} }
void end() { }
#if ENABLED(EMERGENCY_PARSER) #if ENABLED(EMERGENCY_PARSER)
bool recv_callback(const char c) override { bool recv_callback(const char c) override {
emergency_parser.update(emergency_state, c); emergency_parser.update(emergency_state, c);

View file

@ -29,6 +29,8 @@
#undef M_PI // Redefined by all #undef M_PI // Redefined by all
#undef _BV // Redefined by some #undef _BV // Redefined by some
#undef sq // Redefined by teensy3/wiring.h #undef sq // Redefined by teensy3/wiring.h
#undef SBI // Redefined by arduino/const_functions.h
#undef CBI // Redefined by arduino/const_functions.h
#include <Arduino.h> // NOTE: If included earlier then this line is a NOOP #include <Arduino.h> // NOTE: If included earlier then this line is a NOOP

View file

@ -0,0 +1,74 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(BAUD_RATE_GCODE)
#include "../gcode.h"
/**
* M575 - Change serial baud rate
*
* P<index> - Serial port index. Omit for all.
* B<baudrate> - Baud rate (bits per second)
*/
void GcodeSuite::M575() {
const int32_t baud = parser.ulongval('B');
switch (baud) {
case 2400: case 9600: case 19200: case 38400: case 57600:
case 115200: case 250000: case 500000: case 1000000: {
const int8_t port = parser.intval('P', -99);
const bool set0 = (port == -99 || port == 0);
if (set0) {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(" Serial "
#if NUM_SERIAL > 1
, '0',
#else
"0"
#endif
" baud rate set to ", baud
);
}
#if NUM_SERIAL > 1
const bool set1 = (port == -99 || port == 1);
if (set1) {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(" Serial ", '1', " baud rate set to ", baud);
}
#endif
SERIAL_FLUSH();
if (set0) { MYSERIAL0.end(); MYSERIAL0.begin(baud); }
#if NUM_SERIAL > 1
if (set1) { MYSERIAL1.end(); MYSERIAL1.begin(baud); }
#endif
} break;
default: SERIAL_ECHO_MSG("?(B)aud rate is implausible.");
}
}
#endif // NUM_SERIAL > 0 && BAUD_RATE_GCODE

View file

@ -669,6 +669,10 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
case 540: M540(); break; // M540: Set abort on endstop hit for SD printing case 540: M540(); break; // M540: Set abort on endstop hit for SD printing
#endif #endif
#if ENABLED(BAUD_RATE_GCODE)
case 575: M575(); break; // M575: Set serial baudrate
#endif
#if HAS_BED_PROBE #if HAS_BED_PROBE
case 851: M851(); break; // M851: Set Z Probe Z Offset case 851: M851(); break; // M851: Set Z Probe Z Offset
#endif #endif

View file

@ -782,6 +782,10 @@ private:
static void M540(); static void M540();
#endif #endif
#if ENABLED(BAUD_RATE_GCODE)
static void M575();
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE) #if ENABLED(ADVANCED_PAUSE_FEATURE)
static void M600(); static void M600();
static void M603(); static void M603();

View file

@ -1745,3 +1745,7 @@
#define INIT_SDCARD_ON_BOOT #define INIT_SDCARD_ON_BOOT
#endif #endif
#endif #endif
#if !NUM_SERIAL
#undef BAUD_RATE_GCODE
#endif

View file

@ -12,9 +12,7 @@ exec_test $1 $2 "Build Re-ARM Default Configuration"
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
opt_enable VIKI2 SDSUPPORT opt_enable VIKI2 SDSUPPORT SERIAL_PORT2 NEOPIXEL_LED BAUD_RATE_GCODE
opt_enable SERIAL_PORT2
opt_enable NEOPIXEL_LED
opt_set NEOPIXEL_PIN P1_16 opt_set NEOPIXEL_PIN P1_16
exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel" exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel"

View file

@ -19,7 +19,7 @@ opt_enable VIKI2 SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \ BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \ PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \ Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE BAUD_RATE_GCODE \
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Smoothieboard Many Features" exec_test $1 $2 "Smoothieboard Many Features"
@ -31,7 +31,7 @@ opt_enable COREYX USE_XMAX_PLUG DAC_MOTOR_CURRENT_DEFAULT \
AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS \ AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS \
FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR FAN_SOFT_PWM \ FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR FAN_SOFT_PWM \
SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \ SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \
SD_ABORT_ON_ENDSTOP_HIT ADVANCED_OK GCODE_MACROS \ SD_ABORT_ON_ENDSTOP_HIT ADVANCED_OK GCODE_MACROS BAUD_RATE_GCODE \
VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \ VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
EXTRA_FAN_SPEED FWRETRACT MENU_ADDAUTOSTART SDCARD_SORT_ALPHA EXTRA_FAN_SPEED FWRETRACT MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
opt_set FAN_MIN_PWM 50 opt_set FAN_MIN_PWM 50
@ -42,7 +42,7 @@ exec_test $1 $2 "Azteeg X5 MINI WIFI Many less common options"
restore_configs restore_configs
use_example_configs delta/generic use_example_configs delta/generic
opt_set MOTHERBOARD BOARD_COHESION3D_REMIX opt_set MOTHERBOARD BOARD_COHESION3D_REMIX
opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT BAUD_RATE_GCODE
opt_disable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN opt_disable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
opt_set X_DRIVER_TYPE TMC2130 opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2130 opt_set Y_DRIVER_TYPE TMC2130

View file

@ -12,7 +12,7 @@ opt_set EXTRUDERS 2
opt_set SERIAL_PORT -1 opt_set SERIAL_PORT -1
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT \ opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT \
PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_PARK \ PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_PARK \
GCODE_MACROS NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE BAUD_RATE_GCODE GCODE_MACROS NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE
exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT PAREN_COMMENTS GCODE_MOTION_MODES" exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT PAREN_COMMENTS GCODE_MOTION_MODES"
# cleanup # cleanup

View file

@ -9,6 +9,7 @@ set -e
use_example_configs Alfawise/U20 use_example_configs Alfawise/U20
opt_set MOTHERBOARD BOARD_LONGER3D_LK opt_set MOTHERBOARD BOARD_LONGER3D_LK
opt_set SERIAL_PORT 1 opt_set SERIAL_PORT 1
opt_enable BAUD_RATE_GCODE
exec_test $1 $2 "Full-featured U20 config" exec_test $1 $2 "Full-featured U20 config"
# cleanup # cleanup

View file

@ -7,6 +7,7 @@
set -e set -e
use_example_configs STM32/Black_STM32F407VET6 use_example_configs STM32/Black_STM32F407VET6
opt_enable BAUD_RATE_GCODE
exec_test $1 $2 "Full-featured Sample Black STM32F407VET6 config" exec_test $1 $2 "Full-featured Sample Black STM32F407VET6 config"
# cleanup # cleanup

View file

@ -8,7 +8,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_ESP32 opt_set MOTHERBOARD BOARD_ESP32
opt_enable WIFISUPPORT GCODE_MACROS opt_enable WIFISUPPORT GCODE_MACROS BAUD_RATE_GCODE
opt_set "WIFI_SSID \"ssid\"" opt_set "WIFI_SSID \"ssid\""
opt_set "WIFI_PWD \"password\"" opt_set "WIFI_PWD \"password\""
opt_set TX_BUFFER_SIZE 64 opt_set TX_BUFFER_SIZE 64

View file

@ -9,7 +9,7 @@ set -e
restore_configs restore_configs
opt_set MOTHERBOARD BOARD_LINUX_RAMPS opt_set MOTHERBOARD BOARD_LINUX_RAMPS
opt_set TEMP_SENSOR_BED 1 opt_set TEMP_SENSOR_BED 1
opt_enable PIDTEMPBED EEPROM_SETTINGS opt_enable PIDTEMPBED EEPROM_SETTINGS BAUD_RATE_GCODE
exec_test $1 $2 "Linux with EEPROM" exec_test $1 $2 "Linux with EEPROM"
# cleanup # cleanup

View file

@ -32,7 +32,7 @@ opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TE
NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE FILAMENT_RUNOUT_DISTANCE_MM FILAMENT_RUNOUT_SENSOR \ NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE FILAMENT_RUNOUT_DISTANCE_MM FILAMENT_RUNOUT_SENSOR \
AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \ SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
BACKLASH_COMPENSATION BACKLASH_GCODE \ BACKLASH_COMPENSATION BACKLASH_GCODE BAUD_RATE_GCODE \
FWRETRACT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \ FWRETRACT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
PSU_CONTROL AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \ PSU_CONTROL AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \
SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER \ SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER \

View file

@ -22,7 +22,7 @@ opt_set TEMP_SENSOR_0 1
opt_set TEMP_SENSOR_1 5 opt_set TEMP_SENSOR_1 5
opt_set TEMP_SENSOR_BED 1 opt_set TEMP_SENSOR_BED 1
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \
FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY CALIBRATION_GCODE \ FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY CALIBRATION_GCODE BAUD_RATE_GCODE \
FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \ BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER \ PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER \

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1371,6 +1371,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1373,6 +1373,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1377,6 +1377,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1368,6 +1368,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1368,6 +1368,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1368,6 +1368,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1368,6 +1368,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1371,6 +1371,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1373,6 +1373,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1373,6 +1373,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1368,6 +1368,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1374,6 +1374,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1374,6 +1374,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
#define SERIAL_XON_XOFF #define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1370,6 +1370,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1368,6 +1368,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1365,6 +1365,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1368,6 +1368,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1368,6 +1368,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1382,6 +1382,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1371,6 +1371,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1371,6 +1371,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1371,6 +1371,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1371,6 +1371,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1371,6 +1371,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1371,6 +1371,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1371,6 +1371,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1371,6 +1371,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1371,6 +1371,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1371,6 +1371,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1371,6 +1371,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1369,6 +1369,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.

View file

@ -1370,6 +1370,9 @@
//#define SERIAL_XON_XOFF //#define SERIAL_XON_XOFF
#endif #endif
// Add M575 G-code to change the baud rate
//#define BAUD_RATE_GCODE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
// Enable this option to collect and display the maximum // Enable this option to collect and display the maximum
// RX queue usage after transferring a file to SD. // RX queue usage after transferring a file to SD.