From e62b52da99883202f58aef71348823becfd61984 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 21 Mar 2020 20:26:00 -0500 Subject: [PATCH] Use pin/port names for CHITU pins --- Marlin/src/pins/stm32f1/pins_CHITU3D.h | 152 ++++++++++++------------- 1 file changed, 76 insertions(+), 76 deletions(-) diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h index 2411500fb..2db6b1bc0 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h @@ -86,7 +86,7 @@ // #define SDSS -1 #define LED_PIN -1 -#define CASE_LIGHT_PIN 8 +#define CASE_LIGHT_PIN PA8 // 8 #define PS_ON_PIN -1 #define KILL_PIN PD6 // LED strip 24v @@ -111,8 +111,8 @@ // // Temperature Sensors // -#define TEMP_BED_PIN PA0 // Analog Input -#define TEMP_0_PIN PA1 // Analog Input +#define TEMP_BED_PIN PA0 // Analog Input +#define TEMP_0_PIN PA1 // Analog Input #define TEMP_1_PIN -1 // Analog Input #define TEMP_2_PIN -1 // Analog Input @@ -122,9 +122,9 @@ #if HAS_SPI_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS 49 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE 51 // SID (MOSI) - #define LCD_PINS_D4 52 // SCK (CLK) clock + #define LCD_PINS_RS PD1 // 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE PD3 // 51 // SID (MOSI) + #define LCD_PINS_D4 PD4 // 52 // SCK (CLK) clock #elif BOTH(NEWPANEL, PANEL_ONE) #define LCD_PINS_RS PB8 #define LCD_PINS_ENABLE PD2 @@ -140,13 +140,13 @@ #define LCD_PINS_D6 PB14 #define LCD_PINS_D7 PB15 #if DISABLED(NEWPANEL) - #define BEEPER_PIN 33 + #define BEEPER_PIN PC1 // 33 // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK PC6 // 38 + //#define SHIFT_LD PC10 // 42 + //#define SHIFT_OUT PC8 // 40 + //#define SHIFT_EN PA1 // 17 #endif #endif @@ -154,125 +154,125 @@ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 37 + #define BEEPER_PIN PC5 - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 + #define BTN_EN1 PB15 // 31 + #define BTN_EN2 PC1 // 33 + #define BTN_ENC PC3 // 35 - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN PD1 // 49 + #define KILL_PIN PC9 // 41 #if ENABLED(BQ_LCD_SMART_CONTROLLER) - #define LCD_BACKLIGHT_PIN 39 + #define LCD_BACKLIGHT_PIN PC7 // 39 #endif #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SD_DETECT_PIN 42 + #define BTN_EN1 PE0 // 64 + #define BTN_EN2 PD11 // 59 + #define BTN_ENC PD15 // 63 + #define SD_DETECT_PIN PC10 // 42 #elif ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 47 - #define BTN_EN2 43 - #define BTN_ENC 32 - #define LCD_SDSS 53 + #define BTN_EN1 PC15 // 47 + #define BTN_EN2 PC11 // 43 + #define BTN_ENC PC0 // 32 + #define LCD_SDSS PD5 // 53 #define SD_DETECT_PIN -1 - #define KILL_PIN 41 + #define KILL_PIN PC9 // 41 #elif ENABLED(LCD_I2C_VIKI) - #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. - #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. + #define BTN_EN1 PB6 // 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 PA7 // 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. #define BTN_ENC -1 - #define LCD_SDSS 53 - #define SD_DETECT_PIN 49 + #define LCD_SDSS PD5 // 53 + #define SD_DETECT_PIN PD1 // 49 #elif ANY(VIKI2, miniVIKI) - #define BEEPER_PIN 33 + #define BEEPER_PIN PC1 // 33 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 45 + #define DOGLCD_A0 PC12 // 44 + #define DOGLCD_CS PC13 // 45 #define LCD_SCREEN_ROT_180 - #define BTN_EN1 22 - #define BTN_EN2 7 - #define BTN_ENC 39 + #define BTN_EN1 PB6 // 22 + #define BTN_EN2 PA7 // 7 + #define BTN_ENC PC7 // 39 - #define SDSS 53 + #define SDSS PD5 // 53 #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board - #define KILL_PIN 31 + #define KILL_PIN PB15 // 31 - #define STAT_LED_RED_PIN 32 - #define STAT_LED_BLUE_PIN 35 + #define STAT_LED_RED_PIN PC0 // 32 + #define STAT_LED_BLUE_PIN PC3 // 35 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) - #define BTN_EN1 35 - #define BTN_EN2 37 - #define BTN_ENC 31 - #define SD_DETECT_PIN 49 - #define LCD_SDSS 53 - #define KILL_PIN 41 - #define BEEPER_PIN 23 - #define DOGLCD_CS 29 - #define DOGLCD_A0 27 - #define LCD_BACKLIGHT_PIN 33 + #define BTN_EN1 PC3 // 35 + #define BTN_EN2 PC5 // 37 + #define BTN_ENC PB15 // 31 + #define SD_DETECT_PIN PD1 // 49 + #define LCD_SDSS PD5 // 53 + #define KILL_PIN PC9 // 41 + #define BEEPER_PIN PB7 // 23 + #define DOGLCD_CS PB13 // 29 + #define DOGLCD_A0 PB11 // 27 + #define LCD_BACKLIGHT_PIN PC1 // 33 #elif ENABLED(MINIPANEL) - #define BEEPER_PIN 42 + #define BEEPER_PIN PC10 // 42 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 66 - #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 - #define SDSS 53 + #define DOGLCD_A0 PC12 // 44 + #define DOGLCD_CS PE2 // 66 + #define LCD_BACKLIGHT_PIN PE1 // 65 // backlight LED on A11/D65 + #define SDSS PD5 // 53 - #define KILL_PIN 64 + #define KILL_PIN PE0 // 64 // GLCD features // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 // The encoder and click button - #define BTN_EN1 40 - #define BTN_EN2 63 - #define BTN_ENC 59 + #define BTN_EN1 PC8 // 40 + #define BTN_EN2 PD15 // 63 + #define BTN_ENC PD11 // 59 // not connected to a pin - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN PD1 // 49 #else // Beeper on AUX-4 - #define BEEPER_PIN 33 + #define BEEPER_PIN PC1 // 33 // Buttons directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 + #define BTN_EN1 PE0 // 64 + #define BTN_EN2 PD11 // 59 + #define BTN_ENC PD15 // 63 + #define SHIFT_OUT PC8 // 40 + #define SHIFT_CLK PC12 // 44 + #define SHIFT_LD PC10 // 42 #elif ENABLED(PANEL_ONE) - #define BTN_EN1 59 // AUX2 PIN 3 - #define BTN_EN2 63 // AUX2 PIN 4 - #define BTN_ENC 49 // AUX3 PIN 7 + #define BTN_EN1 PD11 // 59 // AUX2 PIN 3 + #define BTN_EN2 PD15 // 63 // AUX2 PIN 4 + #define BTN_ENC PD1 // 49 // AUX3 PIN 7 #else - #define BTN_EN1 37 - #define BTN_EN2 35 - #define BTN_ENC 31 + #define BTN_EN1 PC5 // 37 + #define BTN_EN2 PC3 // 35 + #define BTN_ENC PB15 // 31 #endif #if ENABLED(G3D_PANEL) - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN PD1 // 49 + #define KILL_PIN PC9 // 41 #else //#define SD_DETECT_PIN -1 // Ramps doesn't use this #endif