Spend 48b PROGMEM to save 16b SRAM

...by moving `homing_feedrate_mm_s` to PROGMEM.
This commit is contained in:
Scott Lahteine 2017-06-05 18:49:16 -05:00
parent 97e13a30ba
commit e6d10f6ddd

View file

@ -389,7 +389,7 @@ static const char *injected_commands_P = NULL;
* Feed rates are often configured with mm/m * Feed rates are often configured with mm/m
* but the planner and stepper like mm/s units. * but the planner and stepper like mm/s units.
*/ */
float constexpr homing_feedrate_mm_s[] = { static const float homing_feedrate_mm_s[] PROGMEM = {
#if ENABLED(DELTA) #if ENABLED(DELTA)
MMM_TO_MMS(HOMING_FEEDRATE_Z), MMM_TO_MMS(HOMING_FEEDRATE_Z), MMM_TO_MMS(HOMING_FEEDRATE_Z), MMM_TO_MMS(HOMING_FEEDRATE_Z),
#else #else
@ -397,6 +397,8 @@ float constexpr homing_feedrate_mm_s[] = {
#endif #endif
MMM_TO_MMS(HOMING_FEEDRATE_Z), 0 MMM_TO_MMS(HOMING_FEEDRATE_Z), 0
}; };
FORCE_INLINE float homing_feedrate(const AxisEnum a) { return pgm_read_float(&homing_feedrate_mm_s[a]); }
float feedrate_mm_s = MMM_TO_MMS(1500.0); float feedrate_mm_s = MMM_TO_MMS(1500.0);
static float saved_feedrate_mm_s; static float saved_feedrate_mm_s;
int feedrate_percentage = 100, saved_feedrate_percentage, int feedrate_percentage = 100, saved_feedrate_percentage,
@ -1504,7 +1506,7 @@ inline float get_homing_bump_feedrate(const AxisEnum axis) {
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOLNPGM("Warning: Homing Bump Divisor < 1"); SERIAL_ECHOLNPGM("Warning: Homing Bump Divisor < 1");
} }
return homing_feedrate_mm_s[axis] / hbd; return homing_feedrate(axis) / hbd;
} }
/** /**
@ -1631,7 +1633,7 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f
// If Z needs to raise, do it before moving XY // If Z needs to raise, do it before moving XY
if (destination[Z_AXIS] < z) { if (destination[Z_AXIS] < z) {
destination[Z_AXIS] = z; destination[Z_AXIS] = z;
prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[Z_AXIS]); prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : homing_feedrate(Z_AXIS));
} }
destination[X_AXIS] = x; destination[X_AXIS] = x;
@ -1641,14 +1643,14 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f
// If Z needs to lower, do it after moving XY // If Z needs to lower, do it after moving XY
if (destination[Z_AXIS] > z) { if (destination[Z_AXIS] > z) {
destination[Z_AXIS] = z; destination[Z_AXIS] = z;
prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[Z_AXIS]); prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : homing_feedrate(Z_AXIS));
} }
#else #else
// If Z needs to raise, do it before moving XY // If Z needs to raise, do it before moving XY
if (current_position[Z_AXIS] < z) { if (current_position[Z_AXIS] < z) {
feedrate_mm_s = fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[Z_AXIS]; feedrate_mm_s = fr_mm_s ? fr_mm_s : homing_feedrate(Z_AXIS);
current_position[Z_AXIS] = z; current_position[Z_AXIS] = z;
line_to_current_position(); line_to_current_position();
} }
@ -1660,7 +1662,7 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f
// If Z needs to lower, do it after moving XY // If Z needs to lower, do it after moving XY
if (current_position[Z_AXIS] > z) { if (current_position[Z_AXIS] > z) {
feedrate_mm_s = fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[Z_AXIS]; feedrate_mm_s = fr_mm_s ? fr_mm_s : homing_feedrate(Z_AXIS);
current_position[Z_AXIS] = z; current_position[Z_AXIS] = z;
line_to_current_position(); line_to_current_position();
} }
@ -2778,11 +2780,11 @@ static void do_homing_move(const AxisEnum axis, const float distance, const floa
SYNC_PLAN_POSITION_KINEMATIC(); SYNC_PLAN_POSITION_KINEMATIC();
current_position[axis] = distance; current_position[axis] = distance;
inverse_kinematics(current_position); inverse_kinematics(current_position);
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], current_position[E_AXIS], fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[axis], active_extruder); planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], current_position[E_AXIS], fr_mm_s ? fr_mm_s : homing_feedrate(axis), active_extruder);
#else #else
sync_plan_position(); sync_plan_position();
current_position[axis] = distance; current_position[axis] = distance;
planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[axis], active_extruder); planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], fr_mm_s ? fr_mm_s : homing_feedrate(axis), active_extruder);
#endif #endif
stepper.synchronize(); stepper.synchronize();
@ -3397,7 +3399,7 @@ inline void gcode_G4() {
const float mlx = max_length(X_AXIS), const float mlx = max_length(X_AXIS),
mly = max_length(Y_AXIS), mly = max_length(Y_AXIS),
mlratio = mlx > mly ? mly / mlx : mlx / mly, mlratio = mlx > mly ? mly / mlx : mlx / mly,
fr_mm_s = min(homing_feedrate_mm_s[X_AXIS], homing_feedrate_mm_s[Y_AXIS]) * sqrt(sq(mlratio) + 1.0); fr_mm_s = min(homing_feedrate(X_AXIS), homing_feedrate(Y_AXIS)) * sqrt(sq(mlratio) + 1.0);
do_blocking_move_to_xy(1.5 * mlx * x_axis_home_dir, 1.5 * mly * home_dir(Y_AXIS), fr_mm_s); do_blocking_move_to_xy(1.5 * mlx * x_axis_home_dir, 1.5 * mly * home_dir(Y_AXIS), fr_mm_s);
endstops.hit_on_purpose(); // clear endstop hit flags endstops.hit_on_purpose(); // clear endstop hit flags
@ -3540,7 +3542,7 @@ inline void gcode_G4() {
// Move all carriages together linearly until an endstop is hit. // Move all carriages together linearly until an endstop is hit.
current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (Z_MAX_LENGTH + 10); current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (Z_MAX_LENGTH + 10);
feedrate_mm_s = homing_feedrate_mm_s[X_AXIS]; feedrate_mm_s = homing_feedrate(X_AXIS);
line_to_current_position(); line_to_current_position();
stepper.synchronize(); stepper.synchronize();
endstops.hit_on_purpose(); // clear endstop hit flags endstops.hit_on_purpose(); // clear endstop hit flags
@ -3853,7 +3855,7 @@ void home_all_axes() { gcode_G28(true); }
const float old_feedrate_mm_s = feedrate_mm_s; const float old_feedrate_mm_s = feedrate_mm_s;
#if MANUAL_PROBE_HEIGHT > 0 #if MANUAL_PROBE_HEIGHT > 0
feedrate_mm_s = homing_feedrate_mm_s[Z_AXIS]; feedrate_mm_s = homing_feedrate(Z_AXIS);
current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS) + MANUAL_PROBE_HEIGHT; current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS) + MANUAL_PROBE_HEIGHT;
line_to_current_position(); line_to_current_position();
#endif #endif
@ -3864,7 +3866,7 @@ void home_all_axes() { gcode_G28(true); }
line_to_current_position(); line_to_current_position();
#if MANUAL_PROBE_HEIGHT > 0 #if MANUAL_PROBE_HEIGHT > 0
feedrate_mm_s = homing_feedrate_mm_s[Z_AXIS]; feedrate_mm_s = homing_feedrate(Z_AXIS);
current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS); // just slightly over the bed current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS); // just slightly over the bed
line_to_current_position(); line_to_current_position();
#endif #endif
@ -3900,7 +3902,7 @@ void home_all_axes() { gcode_G28(true); }
#if ENABLED(MESH_G28_REST_ORIGIN) #if ENABLED(MESH_G28_REST_ORIGIN)
current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS); current_position[Z_AXIS] = LOGICAL_Z_POSITION(Z_MIN_POS);
set_destination_to_current(); set_destination_to_current();
line_to_destination(homing_feedrate_mm_s[Z_AXIS]); line_to_destination(homing_feedrate(Z_AXIS));
stepper.synchronize(); stepper.synchronize();
#endif #endif
} }
@ -5502,7 +5504,7 @@ void home_all_axes() { gcode_G28(true); }
// If any axis has enough movement, do the move // If any axis has enough movement, do the move
LOOP_XYZ(i) LOOP_XYZ(i)
if (fabs(destination[i] - current_position[i]) >= G38_MINIMUM_MOVE) { if (fabs(destination[i] - current_position[i]) >= G38_MINIMUM_MOVE) {
if (!parser.seen('F')) feedrate_mm_s = homing_feedrate_mm_s[i]; if (!parser.seen('F')) feedrate_mm_s = homing_feedrate(i);
// If G38.2 fails throw an error // If G38.2 fails throw an error
if (!G38_run_probe() && is_38_2) { if (!G38_run_probe() && is_38_2) {
SERIAL_ERROR_START; SERIAL_ERROR_START;