Simplify power supply naming logic (#14488)

Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
This commit is contained in:
Tim Moore 2019-07-04 23:58:34 -07:00 committed by Scott Lahteine
parent 44e4f853c8
commit eb6dec03bd
119 changed files with 1141 additions and 1460 deletions

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -349,8 +349,8 @@ extern millis_t max_inactive_time, stepper_inactive_time;
#if HAS_POWER_SWITCH #if HAS_POWER_SWITCH
extern bool powersupply_on; extern bool powersupply_on;
#define PSU_PIN_ON() do{ OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE); powersupply_on = true; }while(0) #define PSU_PIN_ON() do{ OUT_WRITE(PS_ON_PIN, PSU_ACTIVE_HIGH); powersupply_on = true; }while(0)
#define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP); powersupply_on = false; }while(0) #define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, !PSU_ACTIVE_HIGH); powersupply_on = false; }while(0)
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define PSU_ON() powerManager.power_on() #define PSU_ON() powerManager.power_on()
#define PSU_OFF() powerManager.power_off() #define PSU_OFF() powerManager.power_off()

View file

@ -111,8 +111,8 @@
* M76 - Pause the print job timer. * M76 - Pause the print job timer.
* M77 - Stop the print job timer. * M77 - Stop the print job timer.
* M78 - Show statistical information about the print jobs. (Requires PRINTCOUNTER) * M78 - Show statistical information about the print jobs. (Requires PRINTCOUNTER)
* M80 - Turn on Power Supply. (Requires POWER_SUPPLY > 0) * M80 - Turn on Power Supply. (Requires PSU_CONTROL)
* M81 - Turn off Power Supply. (Requires POWER_SUPPLY > 0) * M81 - Turn off Power Supply. (Requires PSU_CONTROL)
* M82 - Set E codes absolute (default). * M82 - Set E codes absolute (default).
* M83 - Set E codes relative while in Absolute (G90) mode. * M83 - Set E codes relative while in Absolute (G90) mode.
* M84 - Disable steppers until next move, or use S<seconds> to specify an idle * M84 - Disable steppers until next move, or use S<seconds> to specify an idle

View file

@ -148,7 +148,7 @@
#define LCD_CONTRAST_MAX 255 #define LCD_CONTRAST_MAX 255
#define DEFAULT_LCD_CONTRAST 220 #define DEFAULT_LCD_CONTRAST 220
#define LED_COLORS_REDUCE_GREEN #define LED_COLORS_REDUCE_GREEN
#if POWER_SUPPLY > 0 && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) #if (HAS_POWER_SWITCH && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1))
#define LED_BACKLIGHT_TIMEOUT 10000 #define LED_BACKLIGHT_TIMEOUT 10000
#endif #endif

View file

@ -269,19 +269,22 @@
#define DISABLE_INACTIVE_E DISABLE_E #define DISABLE_INACTIVE_E DISABLE_E
#endif #endif
// Power Signal Control Definitions /**
// By default use ATX definition * Power Supply Control
#ifndef POWER_SUPPLY */
#define POWER_SUPPLY 1 #ifndef PSU_NAME
#if ENABLED(PSU_CONTROL)
#if PSU_ACTIVE_HIGH
#define PSU_NAME "XBox" // X-Box 360 (203W)
#else
#define PSU_NAME "ATX" // ATX style
#endif #endif
#if (POWER_SUPPLY == 1) // 1 = ATX #else
#define PS_ON_AWAKE LOW #define PSU_NAME "Generic" // No control
#define PS_ON_ASLEEP HIGH
#elif (POWER_SUPPLY == 2) // 2 = X-Box 360 203W
#define PS_ON_AWAKE HIGH
#define PS_ON_ASLEEP LOW
#endif #endif
#define HAS_POWER_SWITCH (POWER_SUPPLY > 0 && PIN_EXISTS(PS_ON)) #endif
#define HAS_POWER_SWITCH (ENABLED(PSU_CONTROL) && PIN_EXISTS(PS_ON))
/** /**
* Temp Sensor defines * Temp Sensor defines

View file

@ -376,6 +376,12 @@
#error "USB_SD_DISABLED is now NO_SD_HOST_DRIVE. Please update your Configuration_adv.h." #error "USB_SD_DISABLED is now NO_SD_HOST_DRIVE. Please update your Configuration_adv.h."
#elif defined(USB_SD_ONBOARD) #elif defined(USB_SD_ONBOARD)
#error "USB_SD_ONBOARD is obsolete. Disable NO_SD_HOST_DRIVE instead." #error "USB_SD_ONBOARD is obsolete. Disable NO_SD_HOST_DRIVE instead."
#elif POWER_SUPPLY == 1
#error "Replace POWER_SUPPLY 1 by enabling PSU_CONTROL and setting PSU_ACTIVE_HIGH to 'false'."
#elif POWER_SUPPLY == 2
#error "Replace POWER_SUPPLY 2 by enabling PSU_CONTROL and setting PSU_ACTIVE_HIGH to 'true'."
#elif defined(POWER_SUPPLY)
#error "POWER_SUPPLY is now obsolete. Please remove it from Configuration.h."
#endif #endif
#define BOARD_MKS_13 -47 #define BOARD_MKS_13 -47
@ -1548,7 +1554,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
/** /**
* LED Backlight Timeout * LED Backlight Timeout
*/ */
#if defined(LED_BACKLIGHT_TIMEOUT) && !(EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) && POWER_SUPPLY > 0) #if defined(LED_BACKLIGHT_TIMEOUT) && !(EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) && HAS_POWER_SWITCH)
#error "LED_BACKLIGHT_TIMEOUT requires a Fysetc Mini Panel and a Power Switch." #error "LED_BACKLIGHT_TIMEOUT requires a Fysetc Mini Panel and a Power Switch."
#endif #endif
@ -2297,6 +2303,13 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#endif #endif
#endif #endif
/**
* Ensure this option is set intentionally
*/
#if ENABLED(PSU_CONTROL) && !defined(PSU_ACTIVE_HIGH)
#error "PSU_CONTROL requires PSU_ACTIVE_HIGH to be defined as 'true' or 'false'."
#endif
#if HAS_CUTTER #if HAS_CUTTER
#define _PIN_CONFLICT(P) (PIN_EXISTS(P) && P##_PIN == SPINDLE_LASER_PWM_PIN) #define _PIN_CONFLICT(P) (PIN_EXISTS(P) && P##_PIN == SPINDLE_LASER_PWM_PIN)
#if BOTH(SPINDLE_FEATURE, LASER_FEATURE) #if BOTH(SPINDLE_FEATURE, LASER_FEATURE)

View file

@ -176,13 +176,7 @@ void menu_info_board() {
STATIC_ITEM(BOARD_NAME, true, true); // MyPrinterController STATIC_ITEM(BOARD_NAME, true, true); // MyPrinterController
STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE), true); // Baud: 250000 STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE), true); // Baud: 250000
STATIC_ITEM(MSG_INFO_PROTOCOL ": " PROTOCOL_VERSION, true); // Protocol: 1.0 STATIC_ITEM(MSG_INFO_PROTOCOL ": " PROTOCOL_VERSION, true); // Protocol: 1.0
#if POWER_SUPPLY == 0 STATIC_ITEM(MSG_INFO_PSU ": " PSU_NAME, true);
STATIC_ITEM(MSG_INFO_PSU ": Generic", true);
#elif POWER_SUPPLY == 1
STATIC_ITEM(MSG_INFO_PSU ": ATX", true); // Power Supply: ATX
#elif POWER_SUPPLY == 2
STATIC_ITEM(MSG_INFO_PSU ": XBox", true); // Power Supply: XBox
#endif
END_SCREEN(); END_SCREEN();
} }

View file

@ -741,7 +741,7 @@
#ifndef LED_PIN #ifndef LED_PIN
#define LED_PIN -1 #define LED_PIN -1
#endif #endif
#if POWER_SUPPLY == 0 || !defined(PS_ON_PIN) #if DISABLED(PSU_CONTROL) || !defined(PS_ON_PIN)
#undef PS_ON_PIN #undef PS_ON_PIN
#define PS_ON_PIN -1 #define PS_ON_PIN -1
#endif #endif

View file

@ -44,9 +44,9 @@
// //
// PSU / SERVO // PSU / SERVO
// //
// If POWER_SUPPLY is specified, always hijack Servo 3 // If PSU_CONTROL is specified, always hijack Servo 3
// //
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
#define SERVO3_PIN -1 #define SERVO3_PIN -1
#define PS_ON_PIN 4 #define PS_ON_PIN 4
#endif #endif

View file

@ -27,7 +27,6 @@ opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_0 -2 opt_set TEMP_SENSOR_0 -2
opt_set TEMP_SENSOR_1 1 opt_set TEMP_SENSOR_1 1
opt_set TEMP_SENSOR_BED 2 opt_set TEMP_SENSOR_BED 2
opt_set POWER_SUPPLY 1
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
opt_set FANMUX0_PIN 53 opt_set FANMUX0_PIN 53
opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING EEPROM_SETTINGS \ opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING EEPROM_SETTINGS \
@ -37,7 +36,7 @@ opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING EEPROM_SETTINGS \
AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \ SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
FWRETRACT ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \ FWRETRACT ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \ PSU_CONTROL AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \
LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST PINS_DEBUGGING \ LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST PINS_DEBUGGING \
MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING BACKLASH_COMPENSATION BACKLASH_GCODE MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING BACKLASH_COMPENSATION BACKLASH_GCODE
opt_enable SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER opt_enable SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -313,20 +313,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -313,20 +313,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -320,20 +320,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -345,7 +343,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -313,20 +313,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -321,20 +321,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -346,7 +344,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -333,9 +331,10 @@
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
#define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CONTROLLERFAN
#define AUTO_POWER_CHAMBER_FAN #define AUTO_POWER_CHAMBER_FAN
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
#define PS_DEFAULT_OFF #define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
#define PS_DEFAULT_OFF #define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -353,20 +353,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -378,7 +376,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -321,20 +321,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -346,7 +344,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -316,20 +316,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -341,7 +339,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -314,20 +314,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -339,7 +337,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -317,20 +317,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -342,7 +340,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -332,20 +332,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -357,7 +355,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -317,20 +317,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -342,7 +340,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -313,20 +313,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
#define PS_DEFAULT_OFF #define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -313,20 +313,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -315,20 +315,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -340,7 +338,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -339,20 +339,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -364,7 +362,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -334,20 +334,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -359,7 +357,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -314,20 +314,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -339,7 +337,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -332,20 +332,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -357,7 +355,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -331,20 +331,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -356,7 +354,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -327,20 +327,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -352,7 +350,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -317,20 +317,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -342,7 +340,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
#define PS_DEFAULT_OFF #define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -316,20 +316,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -341,7 +339,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 2 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH true // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -317,20 +317,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -342,7 +340,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

View file

@ -312,20 +312,18 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature