Add Cartesio CN Controls V11 board

This commit is contained in:
Indrek Ardel 2016-07-04 18:32:52 +03:00
parent c8f2dd7cd5
commit ecb23c1b65
5 changed files with 112 additions and 3 deletions

View file

@ -29,6 +29,7 @@
#define BOARD_GEN7_12 11 // Gen7 v1.1, v1.2 #define BOARD_GEN7_12 11 // Gen7 v1.1, v1.2
#define BOARD_GEN7_13 12 // Gen7 v1.3 #define BOARD_GEN7_13 12 // Gen7 v1.3
#define BOARD_GEN7_14 13 // Gen7 v1.4 #define BOARD_GEN7_14 13 // Gen7 v1.4
#define BOARD_CNCONTROLS_11 111 // Cartesio CN Controls V11
#define BOARD_CNCONTROLS_12 112 // Cartesio CN Controls V12 #define BOARD_CNCONTROLS_12 112 // Cartesio CN Controls V12
#define BOARD_CHEAPTRONIC 2 // Cheaptronic v1.0 #define BOARD_CHEAPTRONIC 2 // Cheaptronic v1.0
#define BOARD_SETHI 20 // Sethi 3D_1 #define BOARD_SETHI 20 // Sethi 3D_1

View file

@ -145,8 +145,13 @@
//U8GLIB_ST7920_128X64_RRD u8g(0,0,0); //U8GLIB_ST7920_128X64_RRD u8g(0,0,0);
U8GLIB_ST7920_128X64_RRD u8g(0); U8GLIB_ST7920_128X64_RRD u8g(0);
#elif defined(CARTESIO_UI) #elif defined(CARTESIO_UI)
// The CartesioUI display with SW-SPI // The CartesioUI display
#if DOGLCD_MOSI != -1 && DOGLCD_SCK != -1
// using SW-SPI
U8GLIB_DOGM128 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); U8GLIB_DOGM128 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0);
#else
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0);
#endif
#elif ENABLED(U8GLIB_LM6059_AF) #elif ENABLED(U8GLIB_LM6059_AF)
// Based on the Adafruit ST7565 (http://www.adafruit.com/products/250) // Based on the Adafruit ST7565 (http://www.adafruit.com/products/250)
U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0); U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0);

View file

@ -118,6 +118,7 @@
// The following define selects which electronics board you have. // The following define selects which electronics board you have.
// Please choose the name from boards.h that matches your setup // Please choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD #ifndef MOTHERBOARD
//#define MOTHERBOARD BOARD_CNCONTROLS_11
#define MOTHERBOARD BOARD_CNCONTROLS_12 #define MOTHERBOARD BOARD_CNCONTROLS_12
#endif #endif

View file

@ -31,6 +31,8 @@
#include "pins_GEN7_13.h" #include "pins_GEN7_13.h"
#elif MB(GEN7_14) #elif MB(GEN7_14)
#include "pins_GEN7_14.h" #include "pins_GEN7_14.h"
#elif MB(CNCONTROLS_11)
#include "pins_CNCONTROLS_11.h"
#elif MB(CNCONTROLS_12) #elif MB(CNCONTROLS_12)
#include "pins_CNCONTROLS_12.h" #include "pins_CNCONTROLS_12.h"
#elif MB(CHEAPTRONIC) #elif MB(CHEAPTRONIC)
@ -422,4 +424,3 @@
#define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS)) #define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS))
#endif //__PINS_H #endif //__PINS_H

101
Marlin/pins_CNCONTROLS_11.h Normal file
View file

@ -0,0 +1,101 @@
/**
* CartesioV11 pin assignments
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define BOARD_NAME "CN Controls V11"
//#define LARGE_FLASH true
#define X_ENABLE_PIN 35
#define X_STEP_PIN 34
#define X_DIR_PIN 36
#define X_MIN_PIN 43
#define X_MAX_PIN -1
#define Y_ENABLE_PIN 38
#define Y_STEP_PIN 37
#define Y_DIR_PIN 39
#define Y_MIN_PIN 45
#define Y_MAX_PIN -1
#define Z_ENABLE_PIN 41
#define Z_STEP_PIN 40
#define Z_DIR_PIN 48
#define Z_MIN_PIN 42
#define Z_MAX_PIN -1
#define E0_ENABLE_PIN 3
#define E0_STEP_PIN 29
#define E0_DIR_PIN 28
#define HEATER_0_PIN 5
#define TEMP_0_PIN 0 // ANALOG INPUT !!
#define E1_ENABLE_PIN 60
#define E1_STEP_PIN 61
#define E1_DIR_PIN 62
#define HEATER_1_PIN 58
#define TEMP_1_PIN 3 // 3 for tool2 -> 2 for chambertemp
#define E2_ENABLE_PIN 16
#define E2_STEP_PIN 15
#define E2_DIR_PIN 14
#define HEATER_2_PIN 64
#define TEMP_2_PIN 2 // 9 for tool3 -> 2 for chambertemp
#define E3_ENABLE_PIN 47
#define E3_STEP_PIN 44
#define E3_DIR_PIN 49
#define HEATER_3_PIN 46
#define TEMP_3_PIN 11 // 11 for tool4 -> 2 for chambertemp
#define HEATER_BED_PIN 2
#define TEMP_BED_PIN 1 // ANALOG INPUT !!
// Tools
//#define TOOL_0_PIN 4
//#define TOOL_1_PIN 59
//#define TOOL_2_PIN 8
//#define TOOL_3_PIN 30
//#define TOOL_PWM_PIN 7 // common PWM pin for all tools
// Common I/O
//#define TEMP_CHAMBER_PIN 2 // ANALOG INPUT !!
//#define FIL_RUNOUT_PIN -1
//#define PWM_1_PIN 11
//#define PWM_2_PIN 10
//#define SPARE_IO 12
//#define FAN_PIN 7 // common PWM pin for all tools
// User interface
#define BEEPER_PIN 6
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 26
#define DOGLCD_CS 24
#define DOGLCD_MOSI -1
#define DOGLCD_SCK -1
// The encoder and click button
#define BTN_EN1 23
#define BTN_EN2 25
#define BTN_ENC 27
// Hardware buttons for manual movement of XYZ
#define SHIFT_OUT 19
#define SHIFT_LD 18
#define SHIFT_CLK 17
//#define UI1 31
//#define UI2 22
// Other
#define SDSS 53
#define SD_DETECT_PIN 13
#define STAT_LED_BLUE -1
#define STAT_LED_RED 31