Merge pull request #4955 from thinkyhead/rc_debug_pins

PINS_DEBUGGING and M43: Read pin states
This commit is contained in:
Scott Lahteine 2016-10-07 14:47:34 -05:00 committed by GitHub
commit ee01def16d
48 changed files with 934 additions and 297 deletions

View file

@ -810,4 +810,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -417,8 +417,6 @@ const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'};
// Number of characters read in the current line of serial input // Number of characters read in the current line of serial input
static int serial_count = 0; static int serial_count = 0;
const int sensitive_pins[] = SENSITIVE_PINS; ///< Sensitive pin list for M42
// Inactivity shutdown // Inactivity shutdown
millis_t previous_cmd_ms = 0; millis_t previous_cmd_ms = 0;
static millis_t max_inactive_time = 0; static millis_t max_inactive_time = 0;
@ -4614,6 +4612,16 @@ inline void gcode_M31() {
#endif // SDSUPPORT #endif // SDSUPPORT
/**
* Sensitive pin test for M42, M226
*/
static bool pin_is_protected(uint8_t pin) {
static const int sensitive_pins[] = SENSITIVE_PINS;
for (uint8_t i = 0; i < COUNT(sensitive_pins); i++)
if (sensitive_pins[i] == pin) return true;
return false;
}
/** /**
* M42: Change pin status via GCode * M42: Change pin status via GCode
* *
@ -4629,8 +4637,7 @@ inline void gcode_M42() {
int pin_number = code_seen('P') ? code_value_int() : LED_PIN; int pin_number = code_seen('P') ? code_value_int() : LED_PIN;
if (pin_number < 0) return; if (pin_number < 0) return;
for (uint8_t i = 0; i < COUNT(sensitive_pins); i++) if (pin_is_protected(pin_number)) {
if (pin_number == sensitive_pins[i]) {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_PROTECTED_PIN); SERIAL_ERRORLNPGM(MSG_ERR_PROTECTED_PIN);
return; return;
@ -4655,6 +4662,66 @@ inline void gcode_M42() {
#endif #endif
} }
#if ENABLED(PINS_DEBUGGING)
#include "pinsDebug.h"
/**
* M43: Pin report and debug
*
* P<pin> Will read/watch a single pin
* W Watch pins for changes until reboot
*/
inline void gcode_M43() {
int first_pin = 0, last_pin = DIO_COUNT - 1;
if (code_seen('P')) {
first_pin = last_pin = code_value_byte();
if (first_pin > DIO_COUNT - 1) return;
}
if (code_seen('W') && code_value_bool()) { // watch digital pins
byte pin_state[last_pin - first_pin + 1];
for (int8_t pin = first_pin; pin <= last_pin; pin++) {
if (pin_is_protected(pin)) continue;
pinMode(pin, INPUT_PULLUP);
// if (IS_ANALOG(pin))
// pin_state[pin - first_pin] = analogRead(pin - analogInputToDigitalPin(0)); // int16_t pin_state[...]
// else
pin_state[pin - first_pin] = digitalRead(pin);
}
#if ENABLED(EMERGENCY_PARSER)
wait_for_user = true;
#endif
for(;;) {
for (int8_t pin = first_pin; pin <= last_pin; pin++) {
if (pin_is_protected(pin)) continue;
byte val;
// if (IS_ANALOG(pin))
// val = analogRead(pin - analogInputToDigitalPin(0)); // int16_t val
// else
val = digitalRead(pin);
if (val != pin_state[pin - first_pin]) {
report_pin_state(pin);
pin_state[pin - first_pin] = val;
}
}
#if ENABLED(EMERGENCY_PARSER)
if (!wait_for_user) break;
#endif
safe_delay(500);
}
}
else // single pins report
for (int8_t pin = first_pin; pin <= last_pin; pin++)
report_pin_state(pin);
}
#endif // PINS_DEBUGGING
#if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST) #if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
/** /**
@ -5980,7 +6047,8 @@ inline void gcode_M206() {
/** /**
* M209: Enable automatic retract (M209 S1) * M209: Enable automatic retract (M209 S1)
* detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction. * For slicers that don't support G10/11, reversed extrude-only
* moves will be classified as retraction.
*/ */
inline void gcode_M209() { inline void gcode_M209() {
if (code_seen('S')) { if (code_seen('S')) {
@ -6076,34 +6144,23 @@ inline void gcode_M221() {
*/ */
inline void gcode_M226() { inline void gcode_M226() {
if (code_seen('P')) { if (code_seen('P')) {
int pin_number = code_value_int(); int pin_number = code_value_int(),
int pin_state = code_seen('S') ? code_value_int() : -1; // required pin state - default is inverted pin_state = code_seen('S') ? code_value_int() : -1; // required pin state - default is inverted
if (pin_state >= -1 && pin_state <= 1) { if (pin_state >= -1 && pin_state <= 1 && pin_number > -1 && !pin_is_protected(pin_number)) {
for (uint8_t i = 0; i < COUNT(sensitive_pins); i++) {
if (sensitive_pins[i] == pin_number) {
pin_number = -1;
break;
}
}
if (pin_number > -1) {
int target = LOW; int target = LOW;
stepper.synchronize(); stepper.synchronize();
pinMode(pin_number, INPUT); pinMode(pin_number, INPUT);
switch (pin_state) { switch (pin_state) {
case 1: case 1:
target = HIGH; target = HIGH;
break; break;
case 0: case 0:
target = LOW; target = LOW;
break; break;
case -1: case -1:
target = !digitalRead(pin_number); target = !digitalRead(pin_number);
break; break;
@ -6111,8 +6168,7 @@ inline void gcode_M226() {
while (digitalRead(pin_number) != target) idle(); while (digitalRead(pin_number) != target) idle();
} // pin_number > -1 } // pin_state -1 0 1 && pin_number > -1
} // pin_state -1 0 1
} // code_seen('P') } // code_seen('P')
} }
@ -7628,90 +7684,87 @@ void process_next_command() {
case 'M': switch (codenum) { case 'M': switch (codenum) {
#if ENABLED(ULTIPANEL) || ENABLED(EMERGENCY_PARSER) #if ENABLED(ULTIPANEL) || ENABLED(EMERGENCY_PARSER)
case 0: // M0 - Unconditional stop - Wait for user button press on LCD case 0: // M0: Unconditional stop - Wait for user button press on LCD
case 1: // M1 - Conditional stop - Wait for user button press on LCD case 1: // M1: Conditional stop - Wait for user button press on LCD
gcode_M0_M1(); gcode_M0_M1();
break; break;
#endif // ULTIPANEL #endif // ULTIPANEL
case 17: case 17: // M17: Enable all stepper motors
gcode_M17(); gcode_M17();
break; break;
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
case 20: // M20 - list SD card case 20: // M20: list SD card
gcode_M20(); break; gcode_M20(); break;
case 21: // M21 - init SD card case 21: // M21: init SD card
gcode_M21(); break; gcode_M21(); break;
case 22: //M22 - release SD card case 22: // M22: release SD card
gcode_M22(); break; gcode_M22(); break;
case 23: //M23 - Select file case 23: // M23: Select file
gcode_M23(); break; gcode_M23(); break;
case 24: //M24 - Start SD print case 24: // M24: Start SD print
gcode_M24(); break; gcode_M24(); break;
case 25: //M25 - Pause SD print case 25: // M25: Pause SD print
gcode_M25(); break; gcode_M25(); break;
case 26: //M26 - Set SD index case 26: // M26: Set SD index
gcode_M26(); break; gcode_M26(); break;
case 27: //M27 - Get SD status case 27: // M27: Get SD status
gcode_M27(); break; gcode_M27(); break;
case 28: //M28 - Start SD write case 28: // M28: Start SD write
gcode_M28(); break; gcode_M28(); break;
case 29: //M29 - Stop SD write case 29: // M29: Stop SD write
gcode_M29(); break; gcode_M29(); break;
case 30: // M30 <filename> Delete File case 30: // M30 <filename> Delete File
gcode_M30(); break; gcode_M30(); break;
case 32: //M32 - Select file and start SD print case 32: // M32: Select file and start SD print
gcode_M32(); break; gcode_M32(); break;
#if ENABLED(LONG_FILENAME_HOST_SUPPORT) #if ENABLED(LONG_FILENAME_HOST_SUPPORT)
case 33: //M33 - Get the long full path to a file or folder case 33: // M33: Get the long full path to a file or folder
gcode_M33(); break; gcode_M33(); break;
#endif // LONG_FILENAME_HOST_SUPPORT #endif
case 928: //M928 - Start SD write case 928: // M928: Start SD write
gcode_M928(); break; gcode_M928(); break;
#endif //SDSUPPORT #endif //SDSUPPORT
case 31: //M31 take time since the start of the SD print or an M109 command case 31: // M31: Report time since the start of SD print or last M109
gcode_M31(); gcode_M31(); break;
break;
case 42: //M42 -Change pin status via gcode case 42: // M42: Change pin state
gcode_M42(); gcode_M42(); break;
break;
#if ENABLED(PINS_DEBUGGING)
case 43: // M43: Read pin state
gcode_M43(); break;
#endif
#if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST) #if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
case 48: // M48 Z probe repeatability case 48: // M48: Z probe repeatability test
gcode_M48(); gcode_M48();
break; break;
#endif // Z_MIN_PROBE_REPEATABILITY_TEST #endif // Z_MIN_PROBE_REPEATABILITY_TEST
case 75: // Start print timer case 75: // M75: Start print timer
gcode_M75(); gcode_M75(); break;
break; case 76: // M76: Pause print timer
gcode_M76(); break;
case 76: // Pause print timer case 77: // M77: Stop print timer
gcode_M76(); gcode_M77(); break;
break;
case 77: // Stop print timer
gcode_M77();
break;
#if ENABLED(PRINTCOUNTER) #if ENABLED(PRINTCOUNTER)
case 78: // Show print statistics case 78: // M78: Show print statistics
gcode_M78(); gcode_M78(); break;
break;
#endif #endif
#if ENABLED(M100_FREE_MEMORY_WATCHER) #if ENABLED(M100_FREE_MEMORY_WATCHER)
case 100: case 100: // M100: Free Memory Report
gcode_M100(); gcode_M100();
break; break;
#endif #endif
case 104: // M104 case 104: // M104: Set hot end temperature
gcode_M104(); gcode_M104();
break; break;
@ -7745,21 +7798,21 @@ void process_next_command() {
break; break;
#endif #endif
case 140: // M140: Set bed temp case 140: // M140: Set bed temperature
gcode_M140(); gcode_M140();
break; break;
case 105: // M105: Read current temperature case 105: // M105: Report current temperature
gcode_M105(); gcode_M105();
KEEPALIVE_STATE(NOT_BUSY); KEEPALIVE_STATE(NOT_BUSY);
return; // "ok" already printed return; // "ok" already printed
case 109: // M109: Wait for temperature case 109: // M109: Wait for hotend temperature to reach target
gcode_M109(); gcode_M109();
break; break;
#if HAS_TEMP_BED #if HAS_TEMP_BED
case 190: // M190: Wait for bed heater to reach target case 190: // M190: Wait for bed temperature to reach target
gcode_M190(); gcode_M190();
break; break;
#endif // HAS_TEMP_BED #endif // HAS_TEMP_BED
@ -7807,17 +7860,17 @@ void process_next_command() {
gcode_M81(); gcode_M81();
break; break;
case 82: case 82: // M83: Set E axis normal mode (same as other axes)
gcode_M82(); gcode_M82();
break; break;
case 83: case 83: // M83: Set E axis relative mode
gcode_M83(); gcode_M83();
break; break;
case 18: // (for compatibility) case 18: // M18 => M84
case 84: // M84 case 84: // M84: Disable all steppers or set timeout
gcode_M18_M84(); gcode_M18_M84();
break; break;
case 85: // M85 case 85: // M85: Set inactivity stepper shutdown timeout
gcode_M85(); gcode_M85();
break; break;
case 92: // M92: Set the steps-per-unit for one or more axes case 92: // M92: Set the steps-per-unit for one or more axes
@ -7851,14 +7904,14 @@ void process_next_command() {
#endif #endif
#if ENABLED(TEMPERATURE_UNITS_SUPPORT) #if ENABLED(TEMPERATURE_UNITS_SUPPORT)
case 149: case 149: // M149: Set temperature units
gcode_M149(); gcode_M149();
break; break;
#endif #endif
#if ENABLED(BLINKM) #if ENABLED(BLINKM)
case 150: // M150 case 150: // M150: Set the BlinkM LCD color
gcode_M150(); gcode_M150();
break; break;
@ -7866,36 +7919,36 @@ void process_next_command() {
#if ENABLED(EXPERIMENTAL_I2CBUS) #if ENABLED(EXPERIMENTAL_I2CBUS)
case 155: case 155: // M155: Send data to an i2c slave
gcode_M155(); gcode_M155();
break; break;
case 156: case 156: // M156: Request data from an i2c slave
gcode_M156(); gcode_M156();
break; break;
#endif //EXPERIMENTAL_I2CBUS #endif //EXPERIMENTAL_I2CBUS
#if ENABLED(MIXING_EXTRUDER) #if ENABLED(MIXING_EXTRUDER)
case 163: // M163 S<int> P<float> set weight for a mixing extruder case 163: // M163: Set a component weight for mixing extruder
gcode_M163(); gcode_M163();
break; break;
#if MIXING_VIRTUAL_TOOLS > 1 #if MIXING_VIRTUAL_TOOLS > 1
case 164: // M164 S<int> save current mix as a virtual extruder case 164: // M164: Save current mix as a virtual extruder
gcode_M164(); gcode_M164();
break; break;
#endif #endif
#if ENABLED(DIRECT_MIXING_IN_G1) #if ENABLED(DIRECT_MIXING_IN_G1)
case 165: // M165 [ABCDHI]<float> set multiple mix weights case 165: // M165: Set multiple mix weights
gcode_M165(); gcode_M165();
break; break;
#endif #endif
#endif #endif
case 200: // M200 D<diameter> Set filament diameter and set E axis units to cubic. (Use S0 to revert to linear units.) case 200: // M200: Set filament diameter, E to cubic units
gcode_M200(); gcode_M200();
break; break;
case 201: // M201 case 201: // M201: Set max acceleration for print moves (units/s^2)
gcode_M201(); gcode_M201();
break; break;
#if 0 // Not used for Sprinter/grbl gen6 #if 0 // Not used for Sprinter/grbl gen6
@ -7903,180 +7956,180 @@ void process_next_command() {
gcode_M202(); gcode_M202();
break; break;
#endif #endif
case 203: // M203 max feedrate units/sec case 203: // M203: Set max feedrate (units/sec)
gcode_M203(); gcode_M203();
break; break;
case 204: // M204 acclereration S normal moves T filmanent only moves case 204: // M204: Set acceleration
gcode_M204(); gcode_M204();
break; break;
case 205: //M205 advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk case 205: //M205: Set advanced settings
gcode_M205(); gcode_M205();
break; break;
case 206: // M206 additional homing offset case 206: // M206: Set home offsets
gcode_M206(); gcode_M206();
break; break;
#if ENABLED(DELTA) #if ENABLED(DELTA)
case 665: // M665 set delta configurations L<diagonal_rod> R<delta_radius> S<segments_per_sec> case 665: // M665: Set delta configurations
gcode_M665(); gcode_M665();
break; break;
#endif #endif
#if ENABLED(DELTA) || ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(DELTA) || ENABLED(Z_DUAL_ENDSTOPS)
case 666: // M666 set delta / dual endstop adjustment case 666: // M666: Set delta or dual endstop adjustment
gcode_M666(); gcode_M666();
break; break;
#endif #endif
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
case 207: // M207 - Set Retract Length: S<length>, Feedrate: F<units/min>, and Z lift: Z<distance> case 207: // M207: Set Retract Length, Feedrate, and Z lift
gcode_M207(); gcode_M207();
break; break;
case 208: // M208 - Set Recover (unretract) Additional (!) Length: S<length> and Feedrate: F<units/min> case 208: // M208: Set Recover (unretract) Additional Length and Feedrate
gcode_M208(); gcode_M208();
break; break;
case 209: // M209 - Turn Automatic Retract Detection on/off: S<bool> (For slicers that don't support G10/11). Every normal extrude-only move will be classified as retract depending on the direction. case 209: // M209: Turn Automatic Retract Detection on/off
gcode_M209(); gcode_M209();
break; break;
#endif // FWRETRACT #endif // FWRETRACT
case 211: // M211 - Enable, Disable, and/or Report software endstops case 211: // M211: Enable, Disable, and/or Report software endstops
gcode_M211(); gcode_M211();
break; break;
#if HOTENDS > 1 #if HOTENDS > 1
case 218: // M218 - Set a tool offset: T<index> X<offset> Y<offset> case 218: // M218: Set a tool offset
gcode_M218(); gcode_M218();
break; break;
#endif #endif
case 220: // M220 - Set Feedrate Percentage: S<percent> ("FR" on your LCD) case 220: // M220: Set Feedrate Percentage: S<percent> ("FR" on your LCD)
gcode_M220(); gcode_M220();
break; break;
case 221: // M221 - Set Flow Percentage: S<percent> case 221: // M221: Set Flow Percentage
gcode_M221(); gcode_M221();
break; break;
case 226: // M226 P<pin number> S<pin state>- Wait until the specified pin reaches the state required case 226: // M226: Wait until a pin reaches a state
gcode_M226(); gcode_M226();
break; break;
#if HAS_SERVOS #if HAS_SERVOS
case 280: // M280 - set servo position absolute. P: servo index, S: angle or microseconds case 280: // M280: Set servo position absolute
gcode_M280(); gcode_M280();
break; break;
#endif // HAS_SERVOS #endif // HAS_SERVOS
#if HAS_BUZZER #if HAS_BUZZER
case 300: // M300 - Play beep tone case 300: // M300: Play beep tone
gcode_M300(); gcode_M300();
break; break;
#endif // HAS_BUZZER #endif // HAS_BUZZER
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
case 301: // M301 case 301: // M301: Set hotend PID parameters
gcode_M301(); gcode_M301();
break; break;
#endif // PIDTEMP #endif // PIDTEMP
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)
case 304: // M304 case 304: // M304: Set bed PID parameters
gcode_M304(); gcode_M304();
break; break;
#endif // PIDTEMPBED #endif // PIDTEMPBED
#if defined(CHDK) || HAS_PHOTOGRAPH #if defined(CHDK) || HAS_PHOTOGRAPH
case 240: // M240 Triggers a camera by emulating a Canon RC-1 : http://www.doc-diy.net/photo/rc-1_hacked/ case 240: // M240: Trigger a camera by emulating a Canon RC-1 : http://www.doc-diy.net/photo/rc-1_hacked/
gcode_M240(); gcode_M240();
break; break;
#endif // CHDK || PHOTOGRAPH_PIN #endif // CHDK || PHOTOGRAPH_PIN
#if HAS_LCD_CONTRAST #if HAS_LCD_CONTRAST
case 250: // M250 Set LCD contrast value: C<value> (value 0..63) case 250: // M250: Set LCD contrast
gcode_M250(); gcode_M250();
break; break;
#endif // HAS_LCD_CONTRAST #endif // HAS_LCD_CONTRAST
#if ENABLED(PREVENT_COLD_EXTRUSION) #if ENABLED(PREVENT_COLD_EXTRUSION)
case 302: // allow cold extrudes, or set the minimum extrude temperature case 302: // M302: Allow cold extrudes (set the minimum extrude temperature)
gcode_M302(); gcode_M302();
break; break;
#endif // PREVENT_COLD_EXTRUSION #endif // PREVENT_COLD_EXTRUSION
case 303: // M303 PID autotune case 303: // M303: PID autotune
gcode_M303(); gcode_M303();
break; break;
#if ENABLED(MORGAN_SCARA) #if ENABLED(MORGAN_SCARA)
case 360: // M360 SCARA Theta pos1 case 360: // M360: SCARA Theta pos1
if (gcode_M360()) return; if (gcode_M360()) return;
break; break;
case 361: // M361 SCARA Theta pos2 case 361: // M361: SCARA Theta pos2
if (gcode_M361()) return; if (gcode_M361()) return;
break; break;
case 362: // M362 SCARA Psi pos1 case 362: // M362: SCARA Psi pos1
if (gcode_M362()) return; if (gcode_M362()) return;
break; break;
case 363: // M363 SCARA Psi pos2 case 363: // M363: SCARA Psi pos2
if (gcode_M363()) return; if (gcode_M363()) return;
break; break;
case 364: // M364 SCARA Psi pos3 (90 deg to Theta) case 364: // M364: SCARA Psi pos3 (90 deg to Theta)
if (gcode_M364()) return; if (gcode_M364()) return;
break; break;
#endif // SCARA #endif // SCARA
case 400: // M400 finish all moves case 400: // M400: Finish all moves
gcode_M400(); gcode_M400();
break; break;
#if HAS_BED_PROBE #if HAS_BED_PROBE
case 401: case 401: // M401: Deploy probe
gcode_M401(); gcode_M401();
break; break;
case 402: case 402: // M402: Stow probe
gcode_M402(); gcode_M402();
break; break;
#endif // HAS_BED_PROBE #endif // HAS_BED_PROBE
#if ENABLED(FILAMENT_WIDTH_SENSOR) #if ENABLED(FILAMENT_WIDTH_SENSOR)
case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or display nominal filament width case 404: // M404: Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or display nominal filament width
gcode_M404(); gcode_M404();
break; break;
case 405: //M405 Turn on filament sensor for control case 405: // M405: Turn on filament sensor for control
gcode_M405(); gcode_M405();
break; break;
case 406: //M406 Turn off filament sensor for control case 406: // M406: Turn off filament sensor for control
gcode_M406(); gcode_M406();
break; break;
case 407: //M407 Display measured filament diameter case 407: // M407: Display measured filament diameter
gcode_M407(); gcode_M407();
break; break;
#endif // ENABLED(FILAMENT_WIDTH_SENSOR) #endif // ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(MESH_BED_LEVELING) #if ENABLED(MESH_BED_LEVELING)
case 420: // M420 Enable/Disable Mesh Bed Leveling case 420: // M420: Enable/Disable Mesh Bed Leveling
gcode_M420(); gcode_M420();
break; break;
case 421: // M421 Set a Mesh Bed Leveling Z coordinate case 421: // M421: Set a Mesh Bed Leveling Z coordinate
gcode_M421(); gcode_M421();
break; break;
#endif #endif
case 428: // M428 Apply current_position to home_offset case 428: // M428: Apply current_position to home_offset
gcode_M428(); gcode_M428();
break; break;
case 500: // M500 Store settings in EEPROM case 500: // M500: Store settings in EEPROM
gcode_M500(); gcode_M500();
break; break;
case 501: // M501 Read settings from EEPROM case 501: // M501: Read settings from EEPROM
gcode_M501(); gcode_M501();
break; break;
case 502: // M502 Revert to default settings case 502: // M502: Revert to default settings
gcode_M502(); gcode_M502();
break; break;
case 503: // M503 print settings currently in memory case 503: // M503: print settings currently in memory
gcode_M503(); gcode_M503();
break; break;
@ -8087,46 +8140,46 @@ void process_next_command() {
#endif #endif
#if HAS_BED_PROBE #if HAS_BED_PROBE
case 851: // Set Z Probe Z Offset case 851: // M851: Set Z Probe Z Offset
gcode_M851(); gcode_M851();
break; break;
#endif // HAS_BED_PROBE #endif // HAS_BED_PROBE
#if ENABLED(FILAMENT_CHANGE_FEATURE) #if ENABLED(FILAMENT_CHANGE_FEATURE)
case 600: //Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] case 600: // M600: Pause for filament change
gcode_M600(); gcode_M600();
break; break;
#endif // FILAMENT_CHANGE_FEATURE #endif // FILAMENT_CHANGE_FEATURE
#if ENABLED(DUAL_X_CARRIAGE) #if ENABLED(DUAL_X_CARRIAGE)
case 605: case 605: // M605: Set Dual X Carriage movement mode
gcode_M605(); gcode_M605();
break; break;
#endif // DUAL_X_CARRIAGE #endif // DUAL_X_CARRIAGE
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
case 905: // M905 Set advance factor. case 905: // M905: Set advance K factor.
gcode_M905(); gcode_M905();
break; break;
#endif #endif
case 907: // M907 Set digital trimpot motor current using axis codes. case 907: // M907: Set digital trimpot motor current using axis codes.
gcode_M907(); gcode_M907();
break; break;
#if HAS_DIGIPOTSS || ENABLED(DAC_STEPPER_CURRENT) #if HAS_DIGIPOTSS || ENABLED(DAC_STEPPER_CURRENT)
case 908: // M908 Control digital trimpot directly. case 908: // M908: Control digital trimpot directly.
gcode_M908(); gcode_M908();
break; break;
#if ENABLED(DAC_STEPPER_CURRENT) // As with Printrbot RevF #if ENABLED(DAC_STEPPER_CURRENT) // As with Printrbot RevF
case 909: // M909 Print digipot/DAC current value case 909: // M909: Print digipot/DAC current value
gcode_M909(); gcode_M909();
break; break;
case 910: // M910 Commit digipot/DAC value to external EEPROM case 910: // M910: Commit digipot/DAC value to external EEPROM
gcode_M910(); gcode_M910();
break; break;
@ -8136,11 +8189,11 @@ void process_next_command() {
#if HAS_MICROSTEPS #if HAS_MICROSTEPS
case 350: // M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers. case 350: // M350: Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers.
gcode_M350(); gcode_M350();
break; break;
case 351: // M351 Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low. case 351: // M351: Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low.
gcode_M351(); gcode_M351();
break; break;

View file

@ -810,4 +810,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -810,4 +810,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -810,4 +810,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -810,4 +810,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -816,4 +816,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -810,4 +810,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -810,4 +810,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -810,4 +810,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -818,4 +818,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -810,4 +810,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -812,4 +812,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -812,4 +812,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -812,4 +812,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -817,4 +817,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -812,4 +812,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -810,4 +810,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -810,4 +810,9 @@
//#define EXPERIMENTAL_I2CBUS //#define EXPERIMENTAL_I2CBUS
#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
/**
* Add M43 command for pins info and testing
*/
//#define PINS_DEBUGGING
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

View file

@ -275,8 +275,6 @@
#define DIO21_DDR DDRC #define DIO21_DDR DDRC
#define DIO21_PWM NULL #define DIO21_PWM NULL
#undef PB0 #undef PB0
#define PB0_PIN PINB0 #define PB0_PIN PINB0
#define PB0_RPORT PINB #define PB0_RPORT PINB

View file

@ -230,6 +230,9 @@
#ifndef HEATER_3_PIN #ifndef HEATER_3_PIN
#define HEATER_3_PIN -1 #define HEATER_3_PIN -1
#endif #endif
#ifndef HEATER_4_PIN
#define HEATER_4_PIN -1
#endif
#ifndef HEATER_BED_PIN #ifndef HEATER_BED_PIN
#define HEATER_BED_PIN -1 #define HEATER_BED_PIN -1
#endif #endif
@ -273,13 +276,14 @@
#endif #endif
// Marlin needs to account for pins that equal -1 // Marlin needs to account for pins that equal -1
#define marlinAnalogInputToDigitalPin(p) ((p) == -1 ? -1 : (p) + 0xA0) #define marlinAnalogInputToDigitalPin(p) ((p) == -1 ? -1 : analogInputToDigitalPin(p))
// List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those! // List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, E0_MS1_PIN, E0_MS2_PIN, #define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, E0_MS1_PIN, E0_MS2_PIN,
#define _E1_PINS #define _E1_PINS
#define _E2_PINS #define _E2_PINS
#define _E3_PINS #define _E3_PINS
#define _E4_PINS
#if EXTRUDERS > 1 #if EXTRUDERS > 1
#undef _E1_PINS #undef _E1_PINS
@ -290,6 +294,10 @@
#if EXTRUDERS > 3 #if EXTRUDERS > 3
#undef _E3_PINS #undef _E3_PINS
#define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN,
#if EXTRUDERS > 4
#undef _E4_PINS
#define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN,
#endif
#endif #endif
#endif #endif
#endif #endif
@ -298,6 +306,7 @@
#define _H1_PINS #define _H1_PINS
#define _H2_PINS #define _H2_PINS
#define _H3_PINS #define _H3_PINS
#define _H4_PINS
#if HOTENDS > 1 #if HOTENDS > 1
#undef _H1_PINS #undef _H1_PINS
@ -308,6 +317,10 @@
#if HOTENDS > 3 #if HOTENDS > 3
#undef _H3_PINS #undef _H3_PINS
#define _H3_PINS HEATER_3_PIN, EXTRUDER_3_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_3_PIN), #define _H3_PINS HEATER_3_PIN, EXTRUDER_3_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_3_PIN),
#if HOTENDS > 4
#undef _H4_PINS
#define _H4_PINS HEATER_4_PIN, marlinAnalogInputToDigitalPin(TEMP_4_PIN),
#endif
#endif #endif
#endif #endif
#elif ENABLED(MIXING_EXTRUDER) #elif ENABLED(MIXING_EXTRUDER)
@ -319,6 +332,10 @@
#if MIXING_STEPPERS > 3 #if MIXING_STEPPERS > 3
#undef _E3_PINS #undef _E3_PINS
#define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN,
#if MIXING_STEPPERS > 4
#undef _E4_PINS
#define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN,
#endif
#endif #endif
#endif #endif
#endif #endif
@ -451,8 +468,8 @@
Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, \ Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, \
Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_MIN_PROBE_PIN, \ Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_MIN_PROBE_PIN, \
PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, FAN1_PIN, FAN2_PIN, CONTROLLERFAN_PIN, \ PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, FAN1_PIN, FAN2_PIN, CONTROLLERFAN_PIN, \
_E0_PINS _E1_PINS _E2_PINS _E3_PINS BED_PINS \ _E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS BED_PINS \
_H0_PINS _H1_PINS _H2_PINS _H3_PINS \ _H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS \
_X2_PINS _Y2_PINS _Z2_PINS \ _X2_PINS _Y2_PINS _Z2_PINS \
X_MS1_PIN, X_MS2_PIN, Y_MS1_PIN, Y_MS2_PIN, Z_MS1_PIN, Z_MS2_PIN \ X_MS1_PIN, X_MS2_PIN, Y_MS1_PIN, Y_MS2_PIN, Z_MS1_PIN, Z_MS2_PIN \
} }

447
Marlin/pinsDebug.h Normal file
View file

@ -0,0 +1,447 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// How many DIO pins are defined?
#if defined(DIO85_PIN)
#define DIO_COUNT 86
#elif defined(DIO53_PIN)
#define DIO_COUNT 54
#elif defined(DIO47_PIN)
#define DIO_COUNT 48
#elif defined(DIO31_PIN)
#define DIO_COUNT 32
#elif defined(DIO21_PIN)
#define DIO_COUNT 22
#endif
#define _PIN_SAY(NAME) { SERIAL_ECHOPGM(STRINGIFY(NAME)); return true; }
#define PIN_SAY(NAME) if (pin == NAME) _PIN_SAY(_##NAME##_);
#define ANALOG_PIN_SAY(NAME) if (pin == analogInputToDigitalPin(NAME)) _PIN_SAY(_##NAME##_);
#define IS_ANALOG(P) if ((P) >= analogInputToDigitalPin(0) && ((P) <= analogInputToDigitalPin(15) || (P) <= analogInputToDigitalPin(5)))
// Report pin name for a given fastio digital pin index
static bool report_pin_name(int8_t pin) {
SERIAL_ECHO((int)pin);
SERIAL_CHAR(' ');
if (IS_ANALOG(pin)) {
SERIAL_CHAR('('); SERIAL_CHAR('A');
SERIAL_ECHO(int(pin - analogInputToDigitalPin(0)));
SERIAL_CHAR(')'); SERIAL_CHAR(' ');
}
#if defined(RXD) && RXD > -1
if (pin == 0) { SERIAL_ECHOPGM("RXD"); return true; }
#endif
#if defined(TXD) && TXD > -1
if (pin == 1) { SERIAL_ECHOPGM("TXD"); return true; }
#endif
#if PIN_EXISTS(SERVO0)
PIN_SAY(SERVO0_PIN);
#endif
#if PIN_EXISTS(SERVO1)
PIN_SAY(SERVO1_PIN);
#endif
#if PIN_EXISTS(SERVO2)
PIN_SAY(SERVO2_PIN);
#endif
#if PIN_EXISTS(SERVO3)
PIN_SAY(SERVO3_PIN);
#endif
#if PIN_EXISTS(X_MIN)
PIN_SAY(X_MIN_PIN);
#endif
#if PIN_EXISTS(X_MAX)
PIN_SAY(X_MAX_PIN);
#endif
#if PIN_EXISTS(Y_MIN)
PIN_SAY(Y_MIN_PIN);
#endif
#if PIN_EXISTS(Y_MAX)
PIN_SAY(Y_MAX_PIN);
#endif
#if PIN_EXISTS(Z_MIN)
PIN_SAY(Z_MIN_PIN);
#endif
#if PIN_EXISTS(Z_MAX)
PIN_SAY(Z_MAX_PIN);
#endif
#if PIN_EXISTS(Z_MIN_PROBE)
PIN_SAY(Z_MIN_PROBE_PIN);
#endif
#if PIN_EXISTS(X_STEP)
PIN_SAY(X_STEP_PIN);
#endif
#if PIN_EXISTS(X_DIR)
PIN_SAY(X_DIR_PIN);
#endif
#if PIN_EXISTS(X_ENABLE)
PIN_SAY(X_ENABLE_PIN);
#endif
#if PIN_EXISTS(X_MS1)
PIN_SAY(X_MS1_PIN);
#endif
#if PIN_EXISTS(X_MS2)
PIN_SAY(X_MS2_PIN);
#endif
#if PIN_EXISTS(X2_STEP)
PIN_SAY(X2_STEP_PIN);
#endif
#if PIN_EXISTS(X2_DIR)
PIN_SAY(X2_DIR_PIN);
#endif
#if PIN_EXISTS(X2_ENABLE)
PIN_SAY(X2_ENABLE_PIN);
#endif
#if PIN_EXISTS(Y_STEP)
PIN_SAY(Y_STEP_PIN);
#endif
#if PIN_EXISTS(Y_DIR)
PIN_SAY(Y_DIR_PIN);
#endif
#if PIN_EXISTS(Y_ENABLE)
PIN_SAY(Y_ENABLE_PIN);
#endif
#if PIN_EXISTS(Y_MS1)
PIN_SAY(Y_MS1_PIN);
#endif
#if PIN_EXISTS(Y_MS2)
PIN_SAY(Y_MS2_PIN);
#endif
#if PIN_EXISTS(Y2_STEP)
PIN_SAY(Y2_STEP_PIN);
#endif
#if PIN_EXISTS(Y2_DIR)
PIN_SAY(Y2_DIR_PIN);
#endif
#if PIN_EXISTS(Y2_ENABLE)
PIN_SAY(Y2_ENABLE_PIN);
#endif
#if PIN_EXISTS(Z_STEP)
PIN_SAY(Z_STEP_PIN);
#endif
#if PIN_EXISTS(Z_DIR)
PIN_SAY(Z_DIR_PIN);
#endif
#if PIN_EXISTS(Z_ENABLE)
PIN_SAY(Z_ENABLE_PIN);
#endif
#if PIN_EXISTS(Z_MS1)
PIN_SAY(Z_MS1_PIN);
#endif
#if PIN_EXISTS(Z_MS2)
PIN_SAY(Z_MS2_PIN);
#endif
#if PIN_EXISTS(Z2_STEP)
PIN_SAY(Z2_STEP_PIN);
#endif
#if PIN_EXISTS(Z2_DIR)
PIN_SAY(Z2_DIR_PIN);
#endif
#if PIN_EXISTS(Z2_ENABLE)
PIN_SAY(Z2_ENABLE_PIN);
#endif
#if PIN_EXISTS(E0_STEP)
PIN_SAY(E0_STEP_PIN);
#endif
#if PIN_EXISTS(E0_DIR)
PIN_SAY(E0_DIR_PIN);
#endif
#if PIN_EXISTS(E0_ENABLE)
PIN_SAY(E0_ENABLE_PIN);
#endif
#if PIN_EXISTS(E0_MS1)
PIN_SAY(E0_MS1_PIN);
#endif
#if PIN_EXISTS(E0_MS2)
PIN_SAY(E0_MS2_PIN);
#endif
#if PIN_EXISTS(E1_STEP)
PIN_SAY(E1_STEP_PIN);
#endif
#if PIN_EXISTS(E1_DIR)
PIN_SAY(E1_DIR_PIN);
#endif
#if PIN_EXISTS(E1_ENABLE)
PIN_SAY(E1_ENABLE_PIN);
#endif
#if PIN_EXISTS(E1_MS1)
PIN_SAY(E1_MS1_PIN);
#endif
#if PIN_EXISTS(E1_MS2)
PIN_SAY(E1_MS2_PIN);
#endif
#if PIN_EXISTS(E2_STEP)
PIN_SAY(E2_STEP_PIN);
#endif
#if PIN_EXISTS(E2_DIR)
PIN_SAY(E2_DIR_PIN);
#endif
#if PIN_EXISTS(E2_ENABLE)
PIN_SAY(E2_ENABLE_PIN);
#endif
#if PIN_EXISTS(E3_STEP)
PIN_SAY(E3_STEP_PIN);
#endif
#if PIN_EXISTS(E3_DIR)
PIN_SAY(E3_DIR_PIN);
#endif
#if PIN_EXISTS(E3_ENABLE)
PIN_SAY(E3_ENABLE_PIN);
#endif
#if PIN_EXISTS(E4_STEP)
PIN_SAY(E4_STEP_PIN);
#endif
#if PIN_EXISTS(E4_DIR)
PIN_SAY(E4_DIR_PIN);
#endif
#if PIN_EXISTS(E4_ENABLE)
PIN_SAY(E4_ENABLE_PIN);
#endif
#if PIN_EXISTS(FAN)
PIN_SAY(FAN_PIN);
#endif
#if PIN_EXISTS(FAN1)
PIN_SAY(FAN1_PIN);
#endif
#if PIN_EXISTS(FAN2)
PIN_SAY(FAN2_PIN);
#endif
#if PIN_EXISTS(CONTROLLERFAN)
PIN_SAY(CONTROLLERFAN_PIN);
#endif
#if PIN_EXISTS(EXTRUDER_0_AUTO_FAN)
PIN_SAY(EXTRUDER_0_AUTO_FAN_PIN);
#endif
#if PIN_EXISTS(EXTRUDER_1_AUTO_FAN)
PIN_SAY(EXTRUDER_1_AUTO_FAN_PIN);
#endif
#if PIN_EXISTS(EXTRUDER_2_AUTO_FAN)
PIN_SAY(EXTRUDER_2_AUTO_FAN_PIN);
#endif
#if PIN_EXISTS(EXTRUDER_3_AUTO_FAN)
PIN_SAY(EXTRUDER_3_AUTO_FAN_PIN);
#endif
#if PIN_EXISTS(HEATER_0)
PIN_SAY(HEATER_0_PIN);
#endif
#if PIN_EXISTS(HEATER_1)
PIN_SAY(HEATER_1_PIN);
#endif
#if PIN_EXISTS(HEATER_2)
PIN_SAY(HEATER_2_PIN);
#endif
#if PIN_EXISTS(HEATER_3)
PIN_SAY(HEATER_3_PIN);
#endif
#if PIN_EXISTS(HEATER_BED)
PIN_SAY(HEATER_BED_PIN);
#endif
#if PIN_EXISTS(X_ATT)
PIN_SAY(X_ATT_PIN);
#endif
#if PIN_EXISTS(Y_ATT)
PIN_SAY(Y_ATT_PIN);
#endif
#if PIN_EXISTS(Z_ATT)
PIN_SAY(Z_ATT_PIN);
#endif
#if PIN_EXISTS(E0_ATT)
PIN_SAY(E0_ATT_PIN);
#endif
#if PIN_EXISTS(TEMP_0)
ANALOG_PIN_SAY(TEMP_0_PIN);
#endif
#if PIN_EXISTS(TEMP_1)
ANALOG_PIN_SAY(TEMP_1_PIN);
#endif
#if PIN_EXISTS(TEMP_2)
ANALOG_PIN_SAY(TEMP_2_PIN);
#endif
#if PIN_EXISTS(TEMP_3)
ANALOG_PIN_SAY(TEMP_3_PIN);
#endif
#if PIN_EXISTS(TEMP_BED)
ANALOG_PIN_SAY(TEMP_BED_PIN);
#endif
#if PIN_EXISTS(FILWIDTH)
ANALOG_PIN_SAY(FILWIDTH_PIN);
#endif
#if PIN_EXISTS(BEEPER)
PIN_SAY(BEEPER_PIN);
#endif
#if PIN_EXISTS(SLED)
PIN_SAY(SLED_PIN);
#endif
#if PIN_EXISTS(FIL_RUNOUT)
PIN_SAY(FIL_RUNOUT_PIN);
#endif
#if PIN_EXISTS(LED)
PIN_SAY(LED_PIN);
#endif
// #if defined(DEBUG_LED) && DEBUG_LED > -1
// PIN_SAY(DEBUG_LED);
// #endif
#if PIN_EXISTS(STAT_LED_RED)
PIN_SAY(STAT_LED_RED_PIN);
#endif
#if PIN_EXISTS(STAT_LED_BLUE)
PIN_SAY(STAT_LED_BLUE_PIN);
#endif
#if PIN_EXISTS(DIGIPOTSS)
PIN_SAY(DIGIPOTSS_PIN);
#endif
#if PIN_EXISTS(SCK)
PIN_SAY(SCK_PIN);
#endif
#if PIN_EXISTS(MISO)
PIN_SAY(MISO_PIN);
#endif
#if PIN_EXISTS(MOSI)
PIN_SAY(MOSI_PIN);
#endif
#if PIN_EXISTS(SS)
PIN_SAY(SS_PIN);
#endif
#if PIN_EXISTS(SD_DETECT)
PIN_SAY(SD_DETECT_PIN);
#endif
#if defined(SDPOWER) && SDPOWER > -1
PIN_SAY(SDPOWER);
#endif
#if defined(SDSS) && SDSS > -1
PIN_SAY(SDSS);
#endif
#if defined(I2C_SCL) && I2C_SCL > -1
PIN_SAY(I2C_SCL);
#endif
#if defined(I2C_SDA) && I2C_SDA > -1
PIN_SAY(I2C_SDA);
#endif
#if defined(SCL) && SCL > -1
PIN_SAY(SCL);
#endif
#if defined(SDA) && SDA > -1
PIN_SAY(SDA);
#endif
#if PIN_EXISTS(PS_ON)
PIN_SAY(PS_ON_PIN);
#endif
#if PIN_EXISTS(KILL)
PIN_SAY(KILL_PIN);
#endif
#if PIN_EXISTS(SUICIDE)
PIN_SAY(SUICIDE_PIN);
#endif
#if PIN_EXISTS(DEBUG)
PIN_SAY(DEBUG_PIN);
#endif
#if PIN_EXISTS(PHOTOGRAPH)
PIN_SAY(PHOTOGRAPH_PIN);
#endif
#if PIN_EXISTS(BEEPER)
PIN_SAY(BEEPER_PIN);
#endif
#if defined(BTN_EN1) && BTN_EN1 > -1
PIN_SAY(BTN_EN1);
#endif
#if defined(BTN_EN2) && BTN_EN2 > -1
PIN_SAY(BTN_EN2);
#endif
#if defined(BTN_ENC) && BTN_ENC > -1
PIN_SAY(BTN_ENC);
#endif
#if defined(LCD_PINS_RS) && LCD_PINS_RS > -1
PIN_SAY(LCD_PINS_RS);
#endif
#if defined(LCD_PINS_ENABLE) && LCD_PINS_ENABLE > -1
PIN_SAY(LCD_PINS_ENABLE);
#endif
#if defined(LCD_PINS_D4) && LCD_PINS_D4 > -1
PIN_SAY(LCD_PINS_D4);
#endif
#if defined(LCD_PINS_D5) && LCD_PINS_D5 > -1
PIN_SAY(LCD_PINS_D5);
#endif
#if defined(LCD_PINS_D6) && LCD_PINS_D6 > -1
PIN_SAY(LCD_PINS_D6);
#endif
#if defined(LCD_PINS_D7) && LCD_PINS_D7 > -1
PIN_SAY(LCD_PINS_D7);
#endif
#if PIN_EXISTS(RAMPS_D8)
PIN_SAY(RAMPS_D8_PIN);
#endif
#if PIN_EXISTS(RAMPS_D9)
PIN_SAY(RAMPS_D9_PIN);
#endif
#if PIN_EXISTS(RAMPS_D10)
PIN_SAY(RAMPS_D10_PIN);
#endif
#if PIN_EXISTS(MOSFET_D)
PIN_SAY(MOSFET_D_PIN);
#endif
#if PIN_EXISTS(TX_ENABLE)
PIN_SAY(TX_ENABLE_PIN);
#endif
#if PIN_EXISTS(RX_ENABLE)
PIN_SAY(RX_ENABLE_PIN);
#endif
SERIAL_ECHOPGM("<unused>");
return false;
}
inline void report_pin_state(int8_t pin) {
if (report_pin_name(pin)) {
if (pin_is_protected(pin))
SERIAL_ECHOPGM(" (protected)");
else {
SERIAL_ECHOPGM(" = ");
pinMode(pin, INPUT_PULLUP);
SERIAL_ECHO(digitalRead(pin));
if (IS_ANALOG(pin)) {
SERIAL_CHAR(' '); SERIAL_CHAR('(');
SERIAL_ECHO(analogRead(pin - analogInputToDigitalPin(0)));
SERIAL_CHAR(')');
}
}
}
SERIAL_EOL;
}

View file

@ -75,8 +75,8 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 1 // Analog #define TEMP_0_PIN 1 // Analog Input
#define TEMP_BED_PIN 0 // Analog #define TEMP_BED_PIN 0 // Analog Input
// //
// Heaters / Fans // Heaters / Fans

View file

@ -55,8 +55,8 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 6 // ANALOG INPUT - NOT DIGITAL OUTPUT #define TEMP_0_PIN 6 // Analog Input
#define TEMP_BED_PIN 10 #define TEMP_BED_PIN 10 // Analog Input
// //
// Heaters / Fans // Heaters / Fans

View file

@ -40,7 +40,7 @@
#define SLED_PIN -1 #define SLED_PIN -1
#define FILWIDTH_PIN 3 // ANALOG NUMBERING #define FILWIDTH_PIN 3 // Analog Input
/************************************************ /************************************************
* Rambo pin assignments old * Rambo pin assignments old
@ -112,8 +112,8 @@
#define FAN0_PIN 6 #define FAN0_PIN 6
#define FAN1_PIN 2 #define FAN1_PIN 2
#define TEMP_0_PIN 0 #define TEMP_0_PIN 0 // Analog Input
#define TEMP_BED_PIN 7 #define TEMP_BED_PIN 7 // Analog Input
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13

View file

@ -34,5 +34,5 @@
#undef TEMP_0_PIN #undef TEMP_0_PIN
#undef TEMP_1_PIN #undef TEMP_1_PIN
#define TEMP_0_PIN 9 // ANALOG NUMBERING #define TEMP_0_PIN 9 // Analog Input
#define TEMP_1_PIN 11 // ANALOG NUMBERING #define TEMP_1_PIN 11 // Analog Input

View file

@ -68,8 +68,8 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering #define TEMP_0_PIN 7 // Analog Input
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering #define TEMP_BED_PIN 6 // Analog Input
// //
// Heaters / Fans // Heaters / Fans

View file

@ -78,9 +78,9 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 2 // Extruder / Analog pin numbering #define TEMP_0_PIN 2 // Analog Input
#define TEMP_1_PIN 1 // Spare / Analog pin numbering #define TEMP_1_PIN 1 // Analog Input
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering #define TEMP_BED_PIN 0 // Analog Input
// //
// Heaters / Fans // Heaters / Fans

View file

@ -64,9 +64,9 @@
// //
// Temperature sensors // Temperature sensors
// //
#define TEMP_0_PIN 15 #define TEMP_0_PIN 15 // Analog Input
#define TEMP_1_PIN 14 #define TEMP_1_PIN 14 // Analog Input
#define TEMP_BED_PIN 13 #define TEMP_BED_PIN 13 // Analog Input
// //
// Heaters / Fans // Heaters / Fans

View file

@ -51,11 +51,11 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 0 // ANALOG INPUT !! #define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 3 // 3 for tool2 -> 2 for chambertemp #define TEMP_1_PIN 3 // Analog Input. 3 for tool2 -> 2 for chambertemp
#define TEMP_2_PIN 2 // 9 for tool3 -> 2 for chambertemp #define TEMP_2_PIN 2 // Analog Input. 9 for tool3 -> 2 for chambertemp
#define TEMP_3_PIN 11 // 11 for tool4 -> 2 for chambertemp #define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 2 for chambertemp
#define TEMP_BED_PIN 1 // ANALOG INPUT !! #define TEMP_BED_PIN 1 // Analog Input
// //
// Heaters / Fans // Heaters / Fans

View file

@ -51,12 +51,12 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 0 // ANALOG INPUT !! #define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 9 // 9 for tool2 -> 13 for chambertemp #define TEMP_1_PIN 9 // Analog Input. 9 for tool2 -> 13 for chambertemp
#define TEMP_2_PIN 13 // 10 for tool3 -> 13 for chambertemp #define TEMP_2_PIN 13 // Analog Input. 10 for tool3 -> 13 for chambertemp
#define TEMP_3_PIN 11 // 11 for tool4 -> 13 for chambertemp #define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 13 for chambertemp
#define TEMP_BED_PIN 14 // ANALOG INPUT !! #define TEMP_BED_PIN 14 // Analog Input
//#define TEMP_CHAMBER_PIN 13 // ANALOG INPUT !! //#define TEMP_CHAMBER_PIN 13 // Analog Input
// //
// Heaters / Fans // Heaters / Fans

View file

@ -77,10 +77,10 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 3 // ANALOG NUMBERING #define TEMP_0_PIN 3 // Analog Input
#define TEMP_1_PIN 2 // ANALOG NUMBERING #define TEMP_1_PIN 2 // Analog Input
#define TEMP_2_PIN 1 // ANALOG NUMBERING #define TEMP_2_PIN 1 // Analog Input
#define TEMP_BED_PIN 0 // ANALOG NUMBERING #define TEMP_BED_PIN 0 // Analog Input
// //
// Heaters / Fans // Heaters / Fans

View file

@ -60,7 +60,7 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 0 #define TEMP_0_PIN 0 // Analog Input
// //
// Heaters // Heaters

View file

@ -61,8 +61,8 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 0 // ANALOG INPUT (pin 33 extruder) #define TEMP_0_PIN 0 // Analog Input (pin 33 extruder)
#define TEMP_BED_PIN 5 // ANALOG INPUT (pin 34 bed) #define TEMP_BED_PIN 5 // Analog Input (pin 34 bed)
// //
// Heaters // Heaters

View file

@ -63,7 +63,7 @@
// //
// Temperature Sensor // Temperature Sensor
// //
#define TEMP_0_PIN 5 //changed @ rkoeppl 20110410 #define TEMP_0_PIN 5 // Analog Input
// //
// Heaters // Heaters
@ -72,7 +72,7 @@
#if !MB(GEN6) #if !MB(GEN6)
#define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410 #define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410
#define TEMP_BED_PIN 0 //changed @ rkoeppl 20110410 #define TEMP_BED_PIN 0 // Analog Input
#endif #endif
// //

View file

@ -73,8 +73,8 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 1 #define TEMP_0_PIN 1 // Analog Input
#define TEMP_BED_PIN 2 #define TEMP_BED_PIN 2 // Analog Input
// //
// Heaters / Fans // Heaters / Fans

View file

@ -32,40 +32,49 @@
#define GEN7_VERSION 14 // v1.4 #define GEN7_VERSION 14 // v1.4
//x axis pins //
// Limit switches
//
#define X_STOP_PIN 0
#define Y_STOP_PIN 1
#define Z_STOP_PIN 2
//
// Steppers
//
#define X_STEP_PIN 29 #define X_STEP_PIN 29
#define X_DIR_PIN 28 #define X_DIR_PIN 28
#define X_ENABLE_PIN 25 #define X_ENABLE_PIN 25
#define X_STOP_PIN 0
//y axis pins
#define Y_STEP_PIN 27 #define Y_STEP_PIN 27
#define Y_DIR_PIN 26 #define Y_DIR_PIN 26
#define Y_ENABLE_PIN 25 #define Y_ENABLE_PIN 25
#define Y_STOP_PIN 1
//z axis pins
#define Z_STEP_PIN 23 #define Z_STEP_PIN 23
#define Z_DIR_PIN 22 #define Z_DIR_PIN 22
#define Z_ENABLE_PIN 25 #define Z_ENABLE_PIN 25
#define Z_STOP_PIN 2
//extruder pins
#define E0_STEP_PIN 19 #define E0_STEP_PIN 19
#define E0_DIR_PIN 18 #define E0_DIR_PIN 18
#define E0_ENABLE_PIN 25 #define E0_ENABLE_PIN 25
#define TEMP_0_PIN 1 //
#define TEMP_BED_PIN 0 // Temperature Sensors
//
#define TEMP_0_PIN 1 // Analog Input
#define TEMP_BED_PIN 0 // Analog Input
//
// Heaters
//
#define HEATER_0_PIN 4 #define HEATER_0_PIN 4
#define HEATER_BED_PIN 3 #define HEATER_BED_PIN 3
#define PS_ON_PIN 15 #define PS_ON_PIN 15
//our pin for debugging. // A pin for debugging
#define DEBUG_PIN 0 #define DEBUG_PIN 0
//our RS485 pins // RS485 pins
#define TX_ENABLE_PIN 12 #define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13 #define RX_ENABLE_PIN 13

View file

@ -33,49 +33,54 @@
#define BOARD_NAME "Gen7 Custom" #define BOARD_NAME "Gen7 Custom"
//x axis pins //
// Limit Switches
//
#define X_STOP_PIN 0
#define Y_STOP_PIN 1
#define Z_STOP_PIN 2
//
// Steppers
//
#define X_STEP_PIN 21 // different from standard GEN7 #define X_STEP_PIN 21 // different from standard GEN7
#define X_DIR_PIN 20 // different from standard GEN7 #define X_DIR_PIN 20 // different from standard GEN7
#define X_ENABLE_PIN 24 #define X_ENABLE_PIN 24
#define X_STOP_PIN 0
//y axis pins
#define Y_STEP_PIN 23 #define Y_STEP_PIN 23
#define Y_DIR_PIN 22 #define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24 #define Y_ENABLE_PIN 24
#define Y_STOP_PIN 1
//z axis pins
#define Z_STEP_PIN 26 #define Z_STEP_PIN 26
#define Z_DIR_PIN 25 #define Z_DIR_PIN 25
#define Z_ENABLE_PIN 24 #define Z_ENABLE_PIN 24
#define Z_STOP_PIN 2
//extruder pins
#define E0_STEP_PIN 28 #define E0_STEP_PIN 28
#define E0_DIR_PIN 27 #define E0_DIR_PIN 27
#define E0_ENABLE_PIN 24 #define E0_ENABLE_PIN 24
#define TEMP_0_PIN 2 //
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) // Temperature Sensors
//
#define TEMP_0_PIN 2 // Analog Input
#define TEMP_BED_PIN 1 // Analog Input (pin 34 bed)
//
// Heaters
//
#define HEATER_0_PIN 4 #define HEATER_0_PIN 4
#define HEATER_BED_PIN 3 // (bed) #define HEATER_BED_PIN 3 // (bed)
#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support #define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
#define PS_ON_PIN 19 #define PS_ON_PIN 19
//our pin for debugging.
// A pin for debugging
#define DEBUG_PIN -1 #define DEBUG_PIN -1
//our RS485 pins
//#define TX_ENABLE_PIN 12
//#define RX_ENABLE_PIN 13
#define BEEPER_PIN -1 #define BEEPER_PIN -1
//Pins for 4bit LCD Support // 4bit LCD Support
#define LCD_PINS_RS 18 #define LCD_PINS_RS 18
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 16 #define LCD_PINS_D4 16
@ -83,8 +88,11 @@
#define LCD_PINS_D6 13 #define LCD_PINS_D6 13
#define LCD_PINS_D7 14 #define LCD_PINS_D7 14
//buttons are directly attached // Buttons are directly attached
#define BTN_EN1 11 #define BTN_EN1 11
#define BTN_EN2 10 #define BTN_EN2 10
#define BTN_ENC 12 #define BTN_ENC 12
// RS485 pins
//#define TX_ENABLE_PIN 12
//#define RX_ENABLE_PIN 13

View file

@ -74,9 +74,9 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 13 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_0_PIN 13 // Analog Input (D27)
#define TEMP_1_PIN 15 // 1 #define TEMP_1_PIN 15 // Analog Input (1)
#define TEMP_BED_PIN 14 // 1,2 or I2C #define TEMP_BED_PIN 14 // Analog Input (1,2 or I2C)
// //
// Heaters / Fans // Heaters / Fans

View file

@ -92,23 +92,23 @@
// Temperature Sensors // Temperature Sensors
// //
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 4 // ANALOG NUMBERING #define TEMP_0_PIN 4 // Analog Input
#else #else
#define TEMP_0_PIN 0 // ANALOG NUMBERING #define TEMP_0_PIN 0 // Analog Input
#endif #endif
#if TEMP_SENSOR_1 == -1 #if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 5 // ANALOG NUMBERING #define TEMP_1_PIN 5 // Analog Input
#else #else
#define TEMP_1_PIN 2 // ANALOG NUMBERING #define TEMP_1_PIN 2 // Analog Input
#endif #endif
#define TEMP_2_PIN 3 // ANALOG NUMBERING #define TEMP_2_PIN 3 // Analog Input
#if TEMP_SENSOR_BED == -1 #if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 6 // ANALOG NUMBERING #define TEMP_BED_PIN 6 // Analog Input
#else #else
#define TEMP_BED_PIN 1 // ANALOG NUMBERING #define TEMP_BED_PIN 1 // Analog Input
#endif #endif
// //

View file

@ -82,12 +82,12 @@
// Temperature Sensors // Temperature Sensors
// //
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 8 // ANALOG NUMBERING #define TEMP_0_PIN 8 // Analog Input
#else #else
#define TEMP_0_PIN 13 // ANALOG NUMBERING #define TEMP_0_PIN 13 // Analog Input
#endif #endif
#define TEMP_1_PIN 15 // ANALOG NUMBERING #define TEMP_1_PIN 15 // Analog Input
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // Analog Input
// //
// Heaters / Fans // Heaters / Fans

View file

@ -86,21 +86,21 @@
// Temperature Sensors // Temperature Sensors
// //
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 4 // ANALOG NUMBERING #define TEMP_0_PIN 4 // Analog Input
#else #else
#define TEMP_0_PIN 13 // ANALOG NUMBERING #define TEMP_0_PIN 13 // Analog Input
#endif #endif
#if TEMP_SENSOR_1 == -1 #if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 8 // ANALOG NUMBERING #define TEMP_1_PIN 8 // Analog Input
#else #else
#define TEMP_1_PIN 15 // ANALOG NUMBERING #define TEMP_1_PIN 15 // Analog Input
#endif #endif
#if TEMP_SENSOR_BED == -1 #if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 8 // ANALOG NUMBERING #define TEMP_BED_PIN 8 // Analog Input
#else #else
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // Analog Input
#endif #endif
// //

View file

@ -102,24 +102,24 @@
// Temperature Sensors // Temperature Sensors
// //
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 11 // ANALOG NUMBERING #define TEMP_0_PIN 11 // Analog Input
#else #else
#define TEMP_0_PIN 15 // ANALOG NUMBERING #define TEMP_0_PIN 15 // Analog Input
#endif #endif
#if TEMP_SENSOR_1 == -1 #if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 10 // ANALOG NUMBERING #define TEMP_1_PIN 10 // Analog Input
#else #else
#define TEMP_1_PIN 13 // ANALOG NUMBERING #define TEMP_1_PIN 13 // Analog Input
#endif #endif
#if TEMP_SENSOR_2 == -1 #if TEMP_SENSOR_2 == -1
#define TEMP_2_PIN 9 // ANALOG NUMBERING #define TEMP_2_PIN 9 // Analog Input
#else #else
#define TEMP_2_PIN 12 // ANALOG NUMBERING #define TEMP_2_PIN 12 // Analog Input
#endif #endif
#if TEMP_SENSOR_BED == -1 #if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 8 // ANALOG NUMBERING #define TEMP_BED_PIN 8 // Analog Input
#else #else
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // Analog Input
#endif #endif
// //

View file

@ -89,9 +89,9 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 0 #define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 1 #define TEMP_1_PIN 1 // Analog Input
#define TEMP_BED_PIN 2 #define TEMP_BED_PIN 2 // Analog Input
// //
// Heaters / Fans // Heaters / Fans

View file

@ -74,9 +74,9 @@
#define SDSS 16 #define SDSS 16
#define LED_PIN 46 #define LED_PIN 46
#define TEMP_0_PIN 7 // ANALOG NUMBERING #define TEMP_0_PIN 7 // Analog Input
#define TEMP_1_PIN 6 // ANALOG NUMBERING #define TEMP_1_PIN 6 // Analog Input
#define TEMP_BED_PIN 6 // ANALOG NUMBERING #define TEMP_BED_PIN 6 // Analog Input
// //
// Heaters / Fans // Heaters / Fans

View file

@ -98,9 +98,9 @@
#define HEATER_0_PIN 3 // DONE PWM on RIGHT connector #define HEATER_0_PIN 3 // DONE PWM on RIGHT connector
#define HEATER_BED_PIN 4 #define HEATER_BED_PIN 4
#define TEMP_0_PIN 0 // ANALOG INPUT NUMBERING #define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 1 // ANALOG #define TEMP_1_PIN 1 // Analog Input
#define TEMP_BED_PIN 2 // 1,2 or I2C #define TEMP_BED_PIN 2 // Analog Input (1,2 or I2C)
#define I2C_SCL 16 #define I2C_SCL 16
#define I2C_SDA 17 #define I2C_SDA 17

View file

@ -56,20 +56,27 @@
#define BOARD_NAME "Alpha OMCA" #define BOARD_NAME "Alpha OMCA"
//
// Limit Switches
//
#define X_STOP_PIN 0
#define Y_STOP_PIN 1
#define Z_STOP_PIN 2
//
// Steppers
//
#define X_STEP_PIN 21 #define X_STEP_PIN 21
#define X_DIR_PIN 20 #define X_DIR_PIN 20
#define X_ENABLE_PIN 24 #define X_ENABLE_PIN 24
#define X_STOP_PIN 0
#define Y_STEP_PIN 23 #define Y_STEP_PIN 23
#define Y_DIR_PIN 22 #define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24 #define Y_ENABLE_PIN 24
#define Y_STOP_PIN 1
#define Z_STEP_PIN 26 #define Z_STEP_PIN 26
#define Z_DIR_PIN 25 #define Z_DIR_PIN 25
#define Z_ENABLE_PIN 24 #define Z_ENABLE_PIN 24
#define Z_STOP_PIN 2
#define E0_STEP_PIN 28 #define E0_STEP_PIN 28
#define E0_DIR_PIN 27 #define E0_DIR_PIN 27
@ -83,10 +90,17 @@
#define E2_DIR_PIN -1 // 16 #define E2_DIR_PIN -1 // 16
#define E2_ENABLE_PIN 24 #define E2_ENABLE_PIN 24
#define SDSS 11 //
// Temperature Sensors
//
#define TEMP_0_PIN 0 // Analog Input (D27)
//
// Heaters / Fans
//
#define HEATER_0_PIN 4
#define FAN_PIN 3 #define FAN_PIN 3
#define HEATER_0_PIN 4 #define SDSS 11
#define TEMP_0_PIN 0 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ /* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */

View file

@ -79,10 +79,11 @@
#define Y_STOP_PIN 8 // Ystop in Ystop socket #define Y_STOP_PIN 8 // Ystop in Ystop socket
#endif #endif
#define Z_STOP_PIN 36 #define Z_STOP_PIN 36
#define TEMP_0_PIN 1 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering
#define FILWIDTH_PIN 2 // ANALOG NUMBERING #define TEMP_0_PIN 1 // Analog Input
#define TEMP_BED_PIN 0 // Analog Input
#define FILWIDTH_PIN 2 // Analog Input
////LCD Pin Setup//// ////LCD Pin Setup////